diff options
| author | Ritesh Harjani <riteshh@codeaurora.org> | 2020-02-07 17:34:28 +0530 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2020-03-24 14:35:39 +0100 |
| commit | 219c02ca1cf65c457f31ec32523a75972019a862 (patch) | |
| tree | c5411e26de5943f79f1976b0213db6ca588f46d2 /drivers/mmc/host/sdhci-msm.c | |
| parent | 2a2b821607aea16c9c20f9f4d45096dc860fd33a (diff) | |
mmc: sdhci-msm: Don't enable PWRSAVE_DLL for certain sdhc hosts
SDHC core with new 14lpp and later tech DLL should not enable
PWRSAVE_DLL since such controller's internal gating cannot meet
following MCLK requirement:
When MCLK is gated OFF, it is not gated for less than 0.5us and MCLK
must be switched on for at-least 1us before DATA starts coming.
Adding support for this requirement.
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1581077075-26011-1-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc/host/sdhci-msm.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-msm.c | 18 |
1 files changed, 15 insertions, 3 deletions
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 3955fa5db43c..53b79ee37fdd 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -977,9 +977,21 @@ static int sdhci_msm_cm_dll_sdc4_calibration(struct sdhci_host *host) goto out; } - config = readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec3); - config |= CORE_PWRSAVE_DLL; - writel_relaxed(config, host->ioaddr + msm_offset->core_vendor_spec3); + /* + * Set CORE_PWRSAVE_DLL bit in CORE_VENDOR_SPEC3. + * When MCLK is gated OFF, it is not gated for less than 0.5us + * and MCLK must be switched on for at-least 1us before DATA + * starts coming. Controllers with 14lpp and later tech DLL cannot + * guarantee above requirement. So PWRSAVE_DLL should not be + * turned on for host controllers using this DLL. + */ + if (!msm_host->use_14lpp_dll_reset) { + config = readl_relaxed(host->ioaddr + + msm_offset->core_vendor_spec3); + config |= CORE_PWRSAVE_DLL; + writel_relaxed(config, host->ioaddr + + msm_offset->core_vendor_spec3); + } /* * Drain writebuffer to ensure above DLL calibration |