Merge tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "This contains the following changes for MTD:

  MTD core changes:
   - New Hyperbus framework
   - New _is_locked (concat) implementation
   - Various cleanups

  NAND core changes:
   - use longest matching pattern in ->exec_op() default parser
   - export NAND operation tracer
   - add flag to indicate panic_write in MTD
   - use kzalloc() instead of kmalloc() and memset()

  Raw NAND controller drivers changes:
   - brcmnand:
       - fix BCH ECC layout for large page NAND parts
       - fallback to detected ecc-strength, ecc-step-size
       - when oops in progress use pio and interrupt polling
       - code refactor code to introduce helper functions
       - add support for v7.3 controller
   - FSMC:
       - use nand_op_trace for operation tracing
   - GPMI:
       - move all driver code into single file
       - various cleanups (including dmaengine changes)
       - use runtime PM to manage clocks
       - implement exec_op
   - MTK:
       - correct low level time calculation of r/w cycle
       - improve data sampling timing for read cycle
       - add validity check for CE# pin setting
       - fix wrongly assigned OOB buffer pointer issue
       - re-license MTK NAND driver as Dual MIT/GPL
   - STM32:
       - manage the get_irq error case
       - increase DMA completion timeouts

  Raw NAND chips drivers changes:
   - Macronix: add read-retry support

  Onenand driver changes:
   - add support for 8Gb datasize chips
   - avoid fall-through warnings

  SPI-NAND changes:
   - define macros for page-read ops with three-byte addresses
   - add support for two-byte device IDs and then for GigaDevice
     GD5F1GQ4UFxxG
   - add initial support for Paragon PN26G0xA
   - handle the case where the last page read has bitflips

  SPI-NOR core changes:
   - add support for the mt25ql02g and w25q16jv flashes
   - print error in case of jedec read id fails
   - is25lp256: add post BFPT fix to correct the addr_width

  SPI NOR controller drivers changes:
   - intel-spi: Add support for Intel Elkhart Lake SPI serial flash
   - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
   - cadence-quadspi: add reset control"

* tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits)
  mtd: concat: implement _is_locked mtd operation
  mtd: concat: refactor concat_lock/concat_unlock
  mtd: abi: do not use C++ style comments in uapi header
  mtd: afs: remove unneeded NULL check
  mtd: rawnand: stm32_fmc2: increase DMA completion timeouts
  mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()
  mtd: hyperbus: Add driver for TI's HyperBus memory controller
  mtd: spinand: read returns badly if the last page has bitflips
  mtd: spinand: Add initial support for Paragon PN26G0xA
  mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL
  mtd: rawnand: gpmi: remove double assignment to block_size
  dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support
  mtd: rawnand: brcmnand: Add support for v7.3 controller
  mtd: rawnand: brcmnand: Refactored code to introduce helper functions
  mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling
  mtd: Add flag to indicate panic_write
  mtd: rawnand: Add Macronix NAND read retry support
  mtd: onenand: Avoid fall-through warnings
  mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
  mtd: spinand: Add support for two-byte device IDs
  ...

1 files changed, 38 insertions, 42 deletions

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 6eb131292eb2..91f046d4d452 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -2111,35 +2111,7 @@ static void nand_op_parser_trace(const struct nand_op_parser_ctx *ctx)
 		if (instr == &ctx->subop.instrs[0])
 			prefix = "    ->";
 
-		switch (instr->type) {
-		case NAND_OP_CMD_INSTR:
-			pr_debug("%sCMD      [0x%02x]\n", prefix,
-				 instr->ctx.cmd.opcode);
-			break;
-		case NAND_OP_ADDR_INSTR:
-			pr_debug("%sADDR     [%d cyc: %*ph]\n", prefix,
-				 instr->ctx.addr.naddrs,
-				 instr->ctx.addr.naddrs < 64 ?
-				 instr->ctx.addr.naddrs : 64,
-				 instr->ctx.addr.addrs);
-			break;
-		case NAND_OP_DATA_IN_INSTR:
-			pr_debug("%sDATA_IN  [%d B%s]\n", prefix,
-				 instr->ctx.data.len,
-				 instr->ctx.data.force_8bit ?
-				 ", force 8-bit" : "");
-			break;
-		case NAND_OP_DATA_OUT_INSTR:
-			pr_debug("%sDATA_OUT [%d B%s]\n", prefix,
-				 instr->ctx.data.len,
-				 instr->ctx.data.force_8bit ?
-				 ", force 8-bit" : "");
-			break;
-		case NAND_OP_WAITRDY_INSTR:
-			pr_debug("%sWAITRDY  [max %d ms]\n", prefix,
-				 instr->ctx.waitrdy.timeout_ms);
-			break;
-		}
+		nand_op_trace(prefix, instr);
 
 		if (instr == &ctx->subop.instrs[ctx->subop.ninstrs - 1])
 			prefix = "      ";
@@ -2152,6 +2124,22 @@ static void nand_op_parser_trace(const struct nand_op_parser_ctx *ctx)
 }
 #endif
 
+static int nand_op_parser_cmp_ctx(const struct nand_op_parser_ctx *a,
+				  const struct nand_op_parser_ctx *b)
+{
+	if (a->subop.ninstrs < b->subop.ninstrs)
+		return -1;
+	else if (a->subop.ninstrs > b->subop.ninstrs)
+		return 1;
+
+	if (a->subop.last_instr_end_off < b->subop.last_instr_end_off)
+		return -1;
+	else if (a->subop.last_instr_end_off > b->subop.last_instr_end_off)
+		return 1;
+
+	return 0;
+}
+
 /**
  * nand_op_parser_exec_op - exec_op parser
  * @chip: the NAND chip
@@ -2186,32 +2174,40 @@ int nand_op_parser_exec_op(struct nand_chip *chip,
 	unsigned int i;
 
 	while (ctx.subop.instrs < op->instrs + op->ninstrs) {
-		int ret;
+		const struct nand_op_parser_pattern *pattern;
+		struct nand_op_parser_ctx best_ctx;
+		int ret, best_pattern = -1;
 
 		for (i = 0; i < parser->npatterns; i++) {
-			const struct nand_op_parser_pattern *pattern;
+			struct nand_op_parser_ctx test_ctx = ctx;
 
 			pattern = &parser->patterns[i];
-			if (!nand_op_parser_match_pat(pattern, &ctx))
+			if (!nand_op_parser_match_pat(pattern, &test_ctx))
 				continue;
 
-			nand_op_parser_trace(&ctx);
-
-			if (check_only)
-				break;
-
-			ret = pattern->exec(chip, &ctx.subop);
-			if (ret)
-				return ret;
+			if (best_pattern >= 0 &&
+			    nand_op_parser_cmp_ctx(&test_ctx, &best_ctx) <= 0)
+				continue;
 
-			break;
+			best_pattern = i;
+			best_ctx = test_ctx;
 		}
 
-		if (i == parser->npatterns) {
+		if (best_pattern < 0) {
 			pr_debug("->exec_op() parser: pattern not found!\n");
 			return -ENOTSUPP;
 		}
 
+		ctx = best_ctx;
+		nand_op_parser_trace(&ctx);
+
+		if (!check_only) {
+			pattern = &parser->patterns[best_pattern];
+			ret = pattern->exec(chip, &ctx.subop);
+			if (ret)
+				return ret;
+		}
+
 		/*
 		 * Update the context structure by pointing to the start of the
 		 * next subop.