diff options
author | AnilKumar Ch <anilkumar@ti.com> | 2012-11-21 11:14:10 +0530 |
---|---|---|
committer | Marc Kleine-Budde <mkl@pengutronix.de> | 2012-11-27 09:49:31 +0100 |
commit | 52cde85acc23f61b09dd0376c61eb891125c6990 (patch) | |
tree | b44c83102549a37b8bd4abae7ace6989e1e6f0c5 /drivers/net/can/c_can/c_can_platform.c | |
parent | 03f52a0a554210d5049eeed9f1bb29047dc807cb (diff) |
can: c_can: Add d_can raminit support
Add D_CAN raminit support to C_CAN driver to enable D_CAN RAM,
which holds all the message objects during transmission or
receiving of data. This initialization/de-initialization should
be done in synchronous with D_CAN clock.
In case of AM335X-EVM (current user of D_CAN driver) message RAM is
controlled through control module register for both instances. So
control module register details is required to initialization or
de-initialization of message RAM according to instance number.
Control module memory resource is obtained from D_CAN dt node and
instance number obtained from device tree aliases node.
This patch was tested on AM335x-EVM along with pinctrl data addition
patch, d_can dt aliases addition and control module data addition.
pinctrl data addition is not added to am335x-evm.dts (only supports
CPLD profile#0) because d_can1 is supported under CPLD profile#1.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
[mkl: fix instance for non DT in probe, cleaned up raminit]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers/net/can/c_can/c_can_platform.c')
-rw-r--r-- | drivers/net/can/c_can/c_can_platform.c | 28 |
1 files changed, 27 insertions, 1 deletions
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index ee1416132aba..75c3f472a023 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -38,6 +38,8 @@ #include "c_can.h" +#define CAN_RAMINIT_START_MASK(i) (1 << (i)) + /* * 16-bit c_can registers can be arranged differently in the memory * architecture of different implementations. For example: 16-bit @@ -68,6 +70,18 @@ static void c_can_plat_write_reg_aligned_to_32bit(struct c_can_priv *priv, writew(val, priv->base + 2 * priv->regs[index]); } +static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable) +{ + u32 val; + + val = readl(priv->raminit_ctrlreg); + if (enable) + val |= CAN_RAMINIT_START_MASK(priv->instance); + else + val &= ~CAN_RAMINIT_START_MASK(priv->instance); + writel(val, priv->raminit_ctrlreg); +} + static struct platform_device_id c_can_id_table[] = { [BOSCH_C_CAN_PLATFORM] = { .name = KBUILD_MODNAME, @@ -99,7 +113,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) const struct of_device_id *match; const struct platform_device_id *id; struct pinctrl *pinctrl; - struct resource *mem; + struct resource *mem, *res; int irq; struct clk *clk; @@ -178,6 +192,18 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; + + if (pdev->dev.of_node) + priv->instance = of_alias_get_id(pdev->dev.of_node, "d_can"); + else + priv->instance = pdev->id; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + priv->raminit_ctrlreg = devm_request_and_ioremap(&pdev->dev, res); + if (!priv->raminit_ctrlreg || priv->instance < 0) + dev_info(&pdev->dev, "control memory is not used for raminit\n"); + else + priv->raminit = c_can_hw_raminit; break; default: ret = -EINVAL; |