net: dsa: microchip: ptp: add periodic output signal

LAN937x and KSZ PTP supported switches has Three Trigger output unit.
This TOU can used to generate the periodic signal for PTP. TOU has the
cycle width register of 32 bit in size and period width register of 24
bit, each value is of 8ns so the pulse width can be maximum 125ms.

Tested using ./testptp -d /dev/ptp0 -p 1000000000 -w 100000000 for
generating the 10ms pulse width

Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 63 insertions, 0 deletions

diff --git a/drivers/net/dsa/microchip/ksz_ptp_reg.h b/drivers/net/dsa/microchip/ksz_ptp_reg.h
index abe95bbefc12..c5c76b9a4329 100644
--- a/drivers/net/dsa/microchip/ksz_ptp_reg.h
+++ b/drivers/net/dsa/microchip/ksz_ptp_reg.h
@@ -49,6 +49,69 @@
 #define PTP_MASTER			BIT(1)
 #define PTP_1STEP			BIT(0)
 
+#define REG_PTP_UNIT_INDEX__4		0x0520
+
+#define PTP_GPIO_INDEX			GENMASK(19, 16)
+#define PTP_TSI_INDEX			BIT(8)
+#define PTP_TOU_INDEX			GENMASK(1, 0)
+
+#define REG_PTP_TRIG_STATUS__4		0x0524
+
+#define TRIG_ERROR_M			GENMASK(18, 16)
+#define TRIG_DONE_M			GENMASK(2, 0)
+
+#define REG_PTP_INT_STATUS__4		0x0528
+
+#define TRIG_INT_M			GENMASK(18, 16)
+#define TS_INT_M			GENMASK(1, 0)
+
+#define REG_PTP_CTRL_STAT__4		0x052C
+
+#define GPIO_IN			BIT(7)
+#define GPIO_OUT			BIT(6)
+#define TS_INT_ENABLE			BIT(5)
+#define TRIG_ACTIVE			BIT(4)
+#define TRIG_ENABLE			BIT(3)
+#define TRIG_RESET			BIT(2)
+#define TS_ENABLE			BIT(1)
+#define TS_RESET			BIT(0)
+
+#define REG_TRIG_TARGET_NANOSEC	0x0530
+#define REG_TRIG_TARGET_SEC		0x0534
+
+#define REG_TRIG_CTRL__4		0x0538
+
+#define TRIG_CASCADE_ENABLE		BIT(31)
+#define TRIG_CASCADE_TAIL		BIT(30)
+#define TRIG_CASCADE_UPS_M		GENMASK(29, 26)
+#define TRIG_NOW			BIT(25)
+#define TRIG_NOTIFY			BIT(24)
+#define TRIG_EDGE			BIT(23)
+#define TRIG_PATTERN_M			GENMASK(22, 20)
+#define TRIG_NEG_EDGE			0
+#define TRIG_POS_EDGE			1
+#define TRIG_NEG_PULSE			2
+#define TRIG_POS_PULSE			3
+#define TRIG_NEG_PERIOD		4
+#define TRIG_POS_PERIOD		5
+#define TRIG_REG_OUTPUT		6
+#define TRIG_GPO_M			GENMASK(19, 16)
+#define TRIG_CASCADE_ITERATE_CNT_M	GENMASK(15, 0)
+
+#define REG_TRIG_CYCLE_WIDTH		0x053C
+#define TRIG_CYCLE_WIDTH_M		GENMASK(31, 0)
+
+#define REG_TRIG_CYCLE_CNT		0x0540
+
+#define TRIG_CYCLE_CNT_M		GENMASK(31, 16)
+#define TRIG_BIT_PATTERN_M		GENMASK(15, 0)
+
+#define REG_TRIG_ITERATE_TIME		0x0544
+
+#define REG_TRIG_PULSE_WIDTH__4	0x0548
+
+#define TRIG_PULSE_WIDTH_M		GENMASK(23, 0)
+
 /* Port PTP Register */
 #define REG_PTP_PORT_RX_DELAY__2	0x0C00
 #define REG_PTP_PORT_TX_DELAY__2	0x0C02