diff options
| author | Florian Fainelli <florian.fainelli@broadcom.com> | 2023-10-23 11:17:28 -0700 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2023-10-24 13:08:14 -0700 |
| commit | 6ca80638b90cec66547011ee1ef79e534589989a (patch) | |
| tree | 61b46116a06edbcad2e8c7a936bc98689d17336a /drivers/net/dsa/mt7530.c | |
| parent | 00e984cb986b31e9313745e51daceaa1e1eb7351 (diff) | |
net: dsa: Use conduit and user terms
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/dsa/mt7530.c')
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index ecf5d3deb36e..d27c6b70a2f6 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1113,7 +1113,7 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) u32 val; /* When a new MTU is set, DSA always set the CPU port's MTU to the - * largest MTU of the slave ports. Because the switch only has a global + * largest MTU of the user ports. Because the switch only has a global * RX length register, only allowing CPU port here is enough. */ if (!dsa_is_cpu_port(ds, port)) @@ -2069,7 +2069,7 @@ mt7530_setup_mdio_irq(struct mt7530_priv *priv) unsigned int irq; irq = irq_create_mapping(priv->irq_domain, p); - ds->slave_mii_bus->irq[p] = irq; + ds->user_mii_bus->irq[p] = irq; } } } @@ -2163,7 +2163,7 @@ mt7530_setup_mdio(struct mt7530_priv *priv) if (!bus) return -ENOMEM; - ds->slave_mii_bus = bus; + ds->user_mii_bus = bus; bus->priv = priv; bus->name = KBUILD_MODNAME "-mii"; snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++); @@ -2200,20 +2200,20 @@ mt7530_setup(struct dsa_switch *ds) u32 id, val; int ret, i; - /* The parent node of master netdev which holds the common system + /* The parent node of conduit netdev which holds the common system * controller also is the container for two GMACs nodes representing * as two netdev instances. */ dsa_switch_for_each_cpu_port(cpu_dp, ds) { - dn = cpu_dp->master->dev.of_node->parent; + dn = cpu_dp->conduit->dev.of_node->parent; /* It doesn't matter which CPU port is found first, - * their masters should share the same parent OF node + * their conduits should share the same parent OF node */ break; } if (!dn) { - dev_err(ds->dev, "parent OF node of DSA master not found"); + dev_err(ds->dev, "parent OF node of DSA conduit not found"); return -EINVAL; } @@ -2488,7 +2488,7 @@ mt7531_setup(struct dsa_switch *ds) if (mt7531_dual_sgmii_supported(priv)) { priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; - /* Let ds->slave_mii_bus be able to access external phy. */ + /* Let ds->user_mii_bus be able to access external phy. */ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK, MT7531_EXT_P_MDC_11); mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK, @@ -2717,7 +2717,7 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_TXID: dp = dsa_to_port(ds, port); - phydev = dp->slave->phydev; + phydev = dp->user->phydev; return mt7531_rgmii_setup(priv, port, interface, phydev); case PHY_INTERFACE_MODE_SGMII: case PHY_INTERFACE_MODE_NA: |