diff options
| author | Arınç ÜNAL <arinc.unal@arinc9.com> | 2024-02-06 01:08:07 +0300 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2024-02-07 18:53:53 -0800 |
| commit | c9d70a1d3d64cf4bc5646f2dabe6879650033896 (patch) | |
| tree | a21c1efad9ad25ba9db488f652336ca803b3f3b5 /drivers/net/dsa/mt7530.c | |
| parent | 8c2703f558379b89d079fe437659db9564977893 (diff) | |
net: dsa: mt7530: correct port capabilities of MT7988
On the switch on the MT7988 SoC, as shown in Block Diagram 8.1.1.3 on page
125 of "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open
Version) v0.1", there are only 4 PHYs. That's port 0 to 3. Set the case for
ports which connect to switch PHYs to '0 ... 3'.
Port 4 and 5 are not used at all in this design.
Link: https://wiki.banana-pi.org/Banana_Pi_BPI-R4#Documents [1]
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-6-d7d92a185cb1@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/dsa/mt7530.c')
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index b6ca373a7a50..6b29dec7c6bb 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2577,7 +2577,7 @@ static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port, switch (port) { /* Ports which are connected to switch PHYs. There is no MII pinout. */ - case 0 ... 4: + case 0 ... 3: __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); break; |