Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.

 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.

 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.

 4) Adjust icmp6 message source address selection when routes have a
    preferred source address set, from Tim Stallard.

 5) Be sure to validate HSR protocol version when creating new links,
    from Taehee Yoo.

 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
    non-initial namespaces, from Michael Weiß.

 7) Missing release firmware call in mlx5, from Eran Ben Elisha.

 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
    Taehee Yoo.

 9) Fix pause frame negotiation in marvell phy driver, from Clemens
    Gruber.

10) Record RX queue early enough in tun packet paths such that XDP
    programs will see the correct RX queue index, from Gilberto Bertin.

11) Fix double unlock in mptcp, from Florian Westphal.

12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.

13) marvell10g needs to soft reset PHY when coming out of low power
    mode, from Russell King.

14) Fix MTU setting regression in stmmac for some chip types, from
    Florian Fainelli.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
  amd-xgbe: Use __napi_schedule() in BH context
  mISDN: make dmril and dmrim static
  net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
  net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
  tipc: fix incorrect increasing of link window
  Documentation: Fix tcp_challenge_ack_limit default value
  net: tulip: make early_486_chipsets static
  dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
  ipv6: remove redundant assignment to variable err
  net/rds: Use ERR_PTR for rds_message_alloc_sgs()
  net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
  selftests/bpf: Check for correct program attach/detach in xdp_attach test
  libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
  libbpf: Always specify expected_attach_type on program load if supported
  xsk: Add missing check on user supplied headroom size
  mac80211: fix channel switch trigger from unknown mesh peer
  mac80211: fix race in ieee80211_register_hw()
  net: marvell10g: soft-reset the PHY when coming out of low power
  net: marvell10g: report firmware version
  net/cxgb4: Check the return from t4_query_params properly
  ...

1 files changed, 7 insertions, 10 deletions

diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index ef9b52f3152b..979bb6374678 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -172,9 +172,16 @@ enum mt7530_port_mode {
 /* Register for port vlan control */
 #define MT7530_PVC_P(x)			(0x2010 + ((x) * 0x100))
 #define  PORT_SPEC_TAG			BIT(5)
+#define  PVC_EG_TAG(x)			(((x) & 0x7) << 8)
+#define  PVC_EG_TAG_MASK		PVC_EG_TAG(7)
 #define  VLAN_ATTR(x)			(((x) & 0x3) << 6)
 #define  VLAN_ATTR_MASK			VLAN_ATTR(3)
 
+enum mt7530_vlan_port_eg_tag {
+	MT7530_VLAN_EG_DISABLED = 0,
+	MT7530_VLAN_EG_CONSISTENT = 1,
+};
+
 enum mt7530_vlan_port_attr {
 	MT7530_VLAN_USER = 0,
 	MT7530_VLAN_TRANSPARENT = 3,
@@ -277,7 +284,6 @@ enum mt7530_vlan_port_attr {
 
 /* Registers for TRGMII on the both side */
 #define MT7530_TRGMII_RCK_CTRL		0x7a00
-#define GSW_TRGMII_RCK_CTRL		0x300
 #define  RX_RST				BIT(31)
 #define  RXC_DQSISEL			BIT(30)
 #define  DQSI1_TAP_MASK			(0x7f << 8)
@@ -286,31 +292,24 @@ enum mt7530_vlan_port_attr {
 #define  DQSI0_TAP(x)			((x) & 0x7f)
 
 #define MT7530_TRGMII_RCK_RTT		0x7a04
-#define GSW_TRGMII_RCK_RTT		0x304
 #define  DQS1_GATE			BIT(31)
 #define  DQS0_GATE			BIT(30)
 
 #define MT7530_TRGMII_RD(x)		(0x7a10 + (x) * 8)
-#define GSW_TRGMII_RD(x)		(0x310 + (x) * 8)
 #define  BSLIP_EN			BIT(31)
 #define  EDGE_CHK			BIT(30)
 #define  RD_TAP_MASK			0x7f
 #define  RD_TAP(x)			((x) & 0x7f)
 
-#define GSW_TRGMII_TXCTRL		0x340
 #define MT7530_TRGMII_TXCTRL		0x7a40
 #define  TRAIN_TXEN			BIT(31)
 #define  TXC_INV			BIT(30)
 #define  TX_RST				BIT(28)
 
 #define MT7530_TRGMII_TD_ODT(i)		(0x7a54 + 8 * (i))
-#define GSW_TRGMII_TD_ODT(i)		(0x354 + 8 * (i))
 #define  TD_DM_DRVP(x)			((x) & 0xf)
 #define  TD_DM_DRVN(x)			(((x) & 0xf) << 4)
 
-#define GSW_INTF_MODE			0x390
-#define  INTF_MODE_TRGMII		BIT(1)
-
 #define MT7530_TRGMII_TCK_CTRL		0x7a78
 #define  TCK_TAP(x)			(((x) & 0xf) << 8)
 
@@ -443,7 +442,6 @@ static const char *p5_intf_modes(unsigned int p5_interface)
  * @ds:			The pointer to the dsa core structure
  * @bus:		The bus used for the device and built-in PHY
  * @rstc:		The pointer to reset control used by MCM
- * @ethernet:		The regmap used for access TRGMII-based registers
  * @core_pwr:		The power supplied into the core
  * @io_pwr:		The power supplied into the I/O
  * @reset:		The descriptor for GPIO line tied to its reset pin
@@ -460,7 +458,6 @@ struct mt7530_priv {
 	struct dsa_switch	*ds;
 	struct mii_bus		*bus;
 	struct reset_control	*rstc;
-	struct regmap		*ethernet;
 	struct regulator	*core_pwr;
 	struct regulator	*io_pwr;
 	struct gpio_desc	*reset;