net: dsa: mv88e6xxx: Improve isolation of standalone ports

Clear MapDA on standalone ports to bypass any ATU lookup that might
point the packet in the wrong direction. This means that all packets
are flooded using the PVT config. So make sure that standalone ports
are only allowed to communicate with the local upstream port.

Here is a scenario in which this is needed:

   CPU
    |     .----.
.---0---. | .--0--.
|  sw0  | | | sw1 |
'-1-2-3-' | '-1-2-'
      '---'

- sw0p1 and sw1p1 are bridged
- sw0p2 and sw1p2 are in standalone mode
- Learning must be enabled on sw0p3 in order for hardware forwarding
  to work properly between bridged ports

1. A packet with SA :aa comes in on sw1p2
   1a. Egresses sw1p0
   1b. Ingresses sw0p3, ATU adds an entry for :aa towards port 3
   1c. Egresses sw0p0

2. A packet with DA :aa comes in on sw0p2
   2a. If an ATU lookup is done at this point, the packet will be
       incorrectly forwarded towards sw0p3. With this change in place,
       the ATU is bypassed and the packet is forwarded in accordance
       with the PVT, which only contains the CPU port.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 25 insertions, 7 deletions

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 1023e4549359..7f02ec502e71 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -1290,8 +1290,15 @@ static u16 mv88e6xxx_port_vlan(struct mv88e6xxx_chip *chip, int dev, int port)
 
 	pvlan = 0;
 
-	/* Frames from user ports can egress any local DSA links and CPU ports,
-	 * as well as any local member of their bridge group.
+	/* Frames from standalone user ports can only egress on the
+	 * upstream port.
+	 */
+	if (!dsa_port_bridge_dev_get(dp))
+		return BIT(dsa_switch_upstream_port(ds));
+
+	/* Frames from bridged user ports can egress any local DSA
+	 * links and CPU ports, as well as any local member of their
+	 * bridge group.
 	 */
 	dsa_switch_for_each_port(other_dp, ds)
 		if (other_dp->type == DSA_PORT_TYPE_CPU ||
@@ -2487,6 +2494,10 @@ static int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port,
 	if (err)
 		goto unlock;
 
+	err = mv88e6xxx_port_set_map_da(chip, port, true);
+	if (err)
+		return err;
+
 	err = mv88e6xxx_port_commit_pvid(chip, port);
 	if (err)
 		goto unlock;
@@ -2521,6 +2532,12 @@ static void mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port,
 	    mv88e6xxx_port_vlan_map(chip, port))
 		dev_err(ds->dev, "failed to remap in-chip Port VLAN\n");
 
+	err = mv88e6xxx_port_set_map_da(chip, port, false);
+	if (err)
+		dev_err(ds->dev,
+			"port %d failed to restore map-DA: %pe\n",
+			port, ERR_PTR(err));
+
 	err = mv88e6xxx_port_commit_pvid(chip, port);
 	if (err)
 		dev_err(ds->dev,
@@ -2918,12 +2935,13 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
 		return err;
 
 	/* Port Control 2: don't force a good FCS, set the MTU size to
-	 * 10222 bytes, disable 802.1q tags checking, don't discard tagged or
-	 * untagged frames on this port, do a destination address lookup on all
-	 * received packets as usual, disable ARP mirroring and don't send a
-	 * copy of all transmitted/received frames on this port to the CPU.
+	 * 10222 bytes, disable 802.1q tags checking, don't discard
+	 * tagged or untagged frames on this port, skip destination
+	 * address lookup on user ports, disable ARP mirroring and don't
+	 * send a copy of all transmitted/received frames on this port
+	 * to the CPU.
 	 */
-	err = mv88e6xxx_port_set_map_da(chip, port);
+	err = mv88e6xxx_port_set_map_da(chip, port, !dsa_is_user_port(ds, port));
 	if (err)
 		return err;