diff options
| author | Holger Brunck <holger.brunck@hitachienergy.com> | 2022-02-10 18:48:23 +0100 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2022-02-11 11:21:34 +0000 |
| commit | 926eae604403acfa27ba5b072af458e87e634a50 (patch) | |
| tree | e7c52b7855cf4689ea5baee618d7f4cb13a373de /drivers/net/dsa/mv88e6xxx/chip.c | |
| parent | 066c4b6ba06392e5929ea2ebd17622090b500b58 (diff) | |
dsa: mv88e6xxx: make serdes SGMII/Fiber tx amplitude configurable
The mv88e6352, mv88e6240 and mv88e6176 have a serdes interface. This patch
allows to configure the output swing to a desired value in the
phy-handle of the port. The value which is peak to peak has to be
specified in microvolts. As the chips only supports eight dedicated
values we return EINVAL if the value in the DTS does not match one of
these values.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/dsa/mv88e6xxx/chip.c')
| -rw-r--r-- | drivers/net/dsa/mv88e6xxx/chip.c | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 5344d0c0647e..85527fe4fcc8 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -2987,7 +2987,10 @@ static int mv88e6xxx_setup_upstream_port(struct mv88e6xxx_chip *chip, int port) static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) { + struct device_node *phy_handle = NULL; struct dsa_switch *ds = chip->ds; + struct dsa_port *dp; + int tx_amp; int err; u16 reg; @@ -3178,6 +3181,23 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) return err; } + if (chip->info->ops->serdes_set_tx_amplitude) { + dp = dsa_to_port(ds, port); + if (dp) + phy_handle = of_parse_phandle(dp->dn, "phy-handle", 0); + + if (phy_handle && !of_property_read_u32(phy_handle, + "tx-p2p-microvolt", + &tx_amp)) + err = chip->info->ops->serdes_set_tx_amplitude(chip, + port, tx_amp); + if (phy_handle) { + of_node_put(phy_handle); + if (err) + return err; + } + } + /* Port based VLAN map: give each port the same default address * database, and allow bidirectional communication between the * CPU and DSA port(s), and the other ports. @@ -4246,6 +4266,7 @@ static const struct mv88e6xxx_ops mv88e6176_ops = { .serdes_irq_status = mv88e6352_serdes_irq_status, .serdes_get_regs_len = mv88e6352_serdes_get_regs_len, .serdes_get_regs = mv88e6352_serdes_get_regs, + .serdes_set_tx_amplitude = mv88e6352_serdes_set_tx_amplitude, .gpio_ops = &mv88e6352_gpio_ops, .phylink_get_caps = mv88e6352_phylink_get_caps, }; @@ -4526,6 +4547,7 @@ static const struct mv88e6xxx_ops mv88e6240_ops = { .serdes_irq_status = mv88e6352_serdes_irq_status, .serdes_get_regs_len = mv88e6352_serdes_get_regs_len, .serdes_get_regs = mv88e6352_serdes_get_regs, + .serdes_set_tx_amplitude = mv88e6352_serdes_set_tx_amplitude, .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, @@ -4932,6 +4954,7 @@ static const struct mv88e6xxx_ops mv88e6352_ops = { .serdes_get_stats = mv88e6352_serdes_get_stats, .serdes_get_regs_len = mv88e6352_serdes_get_regs_len, .serdes_get_regs = mv88e6352_serdes_get_regs, + .serdes_set_tx_amplitude = mv88e6352_serdes_set_tx_amplitude, .phylink_get_caps = mv88e6352_phylink_get_caps, }; |