summaryrefslogtreecommitdiff
path: root/drivers/net/dsa
diff options
context:
space:
mode:
authorArınç ÜNAL <arinc.unal@arinc9.com>2024-03-01 12:43:05 +0200
committerPaolo Abeni <pabeni@redhat.com>2024-03-05 12:23:43 +0100
commitb04097c7a7450f7ae172b4a049e8876a85e859be (patch)
tree3455fa6332f7224712e47546b99d295332b2e231 /drivers/net/dsa
parent6324230b3b675397a5bcabf9bf7b0bd0a7f2ae0a (diff)
net: dsa: mt7530: simplify link operations
The "MT7621 Giga Switch Programming Guide v0.3", "MT7531 Reference Manual for Development Board v1.0", and "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version) v0.1" documents show that these bits are enabled at reset: PMCR_IFG_XMIT(1) (not part of PMCR_LINK_SETTINGS_MASK) PMCR_MAC_MODE (not part of PMCR_LINK_SETTINGS_MASK) PMCR_TX_EN PMCR_RX_EN PMCR_BACKOFF_EN (not part of PMCR_LINK_SETTINGS_MASK) PMCR_BACKPR_EN (not part of PMCR_LINK_SETTINGS_MASK) PMCR_TX_FC_EN PMCR_RX_FC_EN These bits also don't exist on the MT7530_PMCR_P(6) register of the switch on the MT7988 SoC: PMCR_IFG_XMIT() PMCR_MAC_MODE PMCR_BACKOFF_EN PMCR_BACKPR_EN Remove the setting of the bits not part of PMCR_LINK_SETTINGS_MASK on phylink_mac_config as they're already set. The bit for setting the port on force mode is already done on mt7530_setup() and mt7531_setup_common(). So get rid of PMCR_FORCE_MODE_ID() which helped determine which bit to use for the switch model. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/mt7530.c12
-rw-r--r--drivers/net/dsa/mt7530.h2
2 files changed, 1 insertions, 13 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 91d927bb49f7..1ae11b180d54 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2667,23 +2667,13 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
{
struct mt7530_priv *priv = ds->priv;
- u32 mcr_cur, mcr_new;
if ((port == 5 || port == 6) && priv->info->mac_port_config)
priv->info->mac_port_config(ds, port, mode, state->interface);
- mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
- mcr_new = mcr_cur;
- mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
- mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
- PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id);
-
/* Are we connected to external phy */
if (port == 5 && dsa_is_user_port(ds, 5))
- mcr_new |= PMCR_EXT_PHY;
-
- if (mcr_new != mcr_cur)
- mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
+ mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY);
}
static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 8a8144868eaa..a71166e0a7fc 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -304,8 +304,6 @@ enum mt7530_vlan_port_acc_frm {
MT7531_FORCE_DPX | \
MT7531_FORCE_RX_FC | \
MT7531_FORCE_TX_FC)
-#define PMCR_FORCE_MODE_ID(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
- MT7531_FORCE_MODE : PMCR_FORCE_MODE)
#define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
PMCR_TX_FC_EN | PMCR_RX_FC_EN | \