net: aquantia: add support for Phy access

GPIO PIN control and access is done by direct phy manipulation.
Here we add an aq_phy module which is able to access phy registers
via MDIO access mailbox.

Access is controlled via HW semaphore.

Co-developed-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 212 insertions, 0 deletions

diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
index d83f1a34a537..6cadc9054544 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
@@ -1644,6 +1644,11 @@ u32 hw_atl_sem_ram_get(struct aq_hw_s *self)
 	return hw_atl_reg_glb_cpu_sem_get(self, HW_ATL_FW_SM_RAM);
 }
 
+u32 hw_atl_sem_mdio_get(struct aq_hw_s *self)
+{
+	return hw_atl_reg_glb_cpu_sem_get(self, HW_ATL_FW_SM_MDIO);
+}
+
 u32 hw_atl_scrpad_get(struct aq_hw_s *aq_hw, u32 scratch_scp)
 {
 	return aq_hw_read_reg(aq_hw,
@@ -1659,3 +1664,60 @@ u32 hw_atl_scrpad25_get(struct aq_hw_s *self)
 {
 	return hw_atl_scrpad_get(self, 0x18);
 }
+
+void hw_atl_glb_mdio_iface1_set(struct aq_hw_s *aq_hw, u32 value)
+{
+	aq_hw_write_reg(aq_hw, HW_ATL_GLB_MDIO_IFACE_N_ADR(1), value);
+}
+
+u32 hw_atl_glb_mdio_iface1_get(struct aq_hw_s *aq_hw)
+{
+	return aq_hw_read_reg(aq_hw, HW_ATL_GLB_MDIO_IFACE_N_ADR(1));
+}
+
+void hw_atl_glb_mdio_iface2_set(struct aq_hw_s *aq_hw, u32 value)
+{
+	aq_hw_write_reg(aq_hw, HW_ATL_GLB_MDIO_IFACE_N_ADR(2), value);
+}
+
+u32 hw_atl_glb_mdio_iface2_get(struct aq_hw_s *aq_hw)
+{
+	return aq_hw_read_reg(aq_hw, HW_ATL_GLB_MDIO_IFACE_N_ADR(2));
+}
+
+void hw_atl_glb_mdio_iface3_set(struct aq_hw_s *aq_hw, u32 value)
+{
+	aq_hw_write_reg(aq_hw, HW_ATL_GLB_MDIO_IFACE_N_ADR(3), value);
+}
+
+u32 hw_atl_glb_mdio_iface3_get(struct aq_hw_s *aq_hw)
+{
+	return aq_hw_read_reg(aq_hw, HW_ATL_GLB_MDIO_IFACE_N_ADR(3));
+}
+
+void hw_atl_glb_mdio_iface4_set(struct aq_hw_s *aq_hw, u32 value)
+{
+	aq_hw_write_reg(aq_hw, HW_ATL_GLB_MDIO_IFACE_N_ADR(4), value);
+}
+
+u32 hw_atl_glb_mdio_iface4_get(struct aq_hw_s *aq_hw)
+{
+	return aq_hw_read_reg(aq_hw, HW_ATL_GLB_MDIO_IFACE_N_ADR(4));
+}
+
+void hw_atl_glb_mdio_iface5_set(struct aq_hw_s *aq_hw, u32 value)
+{
+	aq_hw_write_reg(aq_hw, HW_ATL_GLB_MDIO_IFACE_N_ADR(5), value);
+}
+
+u32 hw_atl_glb_mdio_iface5_get(struct aq_hw_s *aq_hw)
+{
+	return aq_hw_read_reg(aq_hw, HW_ATL_GLB_MDIO_IFACE_N_ADR(5));
+}
+
+u32 hw_atl_mdio_busy_get(struct aq_hw_s *aq_hw)
+{
+	return aq_hw_read_reg_bit(aq_hw, HW_ATL_MDIO_BUSY_ADR,
+				  HW_ATL_MDIO_BUSY_MSK,
+				  HW_ATL_MDIO_BUSY_SHIFT);
+}
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
index b192702a7b8b..5750b0c9cae7 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
@@ -767,9 +767,44 @@ void hw_atl_rpfl3l4_ipv6_src_addr_set(struct aq_hw_s *aq_hw, u8 location,
 void hw_atl_rpfl3l4_ipv6_dest_addr_set(struct aq_hw_s *aq_hw, u8 location,
 				       u32 *ipv6_dest);
 
+/* set Global MDIO Interface 1 */
+void hw_atl_glb_mdio_iface1_set(struct aq_hw_s *hw, u32 value);
+
+/* get Global MDIO Interface 1 */
+u32 hw_atl_glb_mdio_iface1_get(struct aq_hw_s *hw);
+
+/* set Global MDIO Interface 2 */
+void hw_atl_glb_mdio_iface2_set(struct aq_hw_s *hw, u32 value);
+
+/* get Global MDIO Interface 2 */
+u32 hw_atl_glb_mdio_iface2_get(struct aq_hw_s *hw);
+
+/* set Global MDIO Interface 3 */
+void hw_atl_glb_mdio_iface3_set(struct aq_hw_s *hw, u32 value);
+
+/* get Global MDIO Interface 3 */
+u32 hw_atl_glb_mdio_iface3_get(struct aq_hw_s *hw);
+
+/* set Global MDIO Interface 4 */
+void hw_atl_glb_mdio_iface4_set(struct aq_hw_s *hw, u32 value);
+
+/* get Global MDIO Interface 4 */
+u32 hw_atl_glb_mdio_iface4_get(struct aq_hw_s *hw);
+
+/* set Global MDIO Interface 5 */
+void hw_atl_glb_mdio_iface5_set(struct aq_hw_s *hw, u32 value);
+
+/* get Global MDIO Interface 5 */
+u32 hw_atl_glb_mdio_iface5_get(struct aq_hw_s *hw);
+
+u32 hw_atl_mdio_busy_get(struct aq_hw_s *aq_hw);
+
 /* get global microprocessor ram semaphore */
 u32 hw_atl_sem_ram_get(struct aq_hw_s *self);
 
+/* get global microprocessor mdio semaphore */
+u32 hw_atl_sem_mdio_get(struct aq_hw_s *self);
+
 /* get global microprocessor scratch pad register */
 u32 hw_atl_scrpad_get(struct aq_hw_s *aq_hw, u32 scratch_scp);
 
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
index 86c2d12b0dcd..ec3bcdcefc4d 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
@@ -2594,6 +2594,121 @@
 /* default value of bitfield uP Force Interrupt */
 #define HW_ATL_MCP_UP_FORCE_INTERRUPT_DEFAULT 0x0
 
+/* Preprocessor definitions for Global MDIO Interfaces
+ * Address: 0x00000280 + 0x4 * Number of interface
+ */
+#define HW_ATL_GLB_MDIO_IFACE_ADDR_BEGIN   0x00000280u
+
+#define HW_ATL_GLB_MDIO_IFACE_N_ADR(number) \
+	(HW_ATL_GLB_MDIO_IFACE_ADDR_BEGIN + (((number) - 1) * 0x4))
+
+/* MIF MDIO Busy Bitfield Definitions
+ * Preprocessor definitions for the bitfield "MDIO Busy".
+ * PORT="mdio_pif_busy_o"
+ */
+
+/* Register address for bitfield MDIO Busy */
+#define HW_ATL_MDIO_BUSY_ADR 0x00000284
+/* Bitmask for bitfield MDIO Busy */
+#define HW_ATL_MDIO_BUSY_MSK 0x80000000
+/* Inverted bitmask for bitfield MDIO Busy */
+#define HW_ATL_MDIO_BUSY_MSKN 0x7FFFFFFF
+/* Lower bit position of bitfield MDIO Busy */
+#define HW_ATL_MDIO_BUSY_SHIFT 31
+/* Width of bitfield MDIO Busy */
+#define HW_ATL_MDIO_BUSY_WIDTH 1
+
+/* MIF MDIO Execute Operation Bitfield Definitions
+ * Preprocessor definitions for the bitfield "MDIO Execute Operation".
+ * PORT="pif_mdio_op_start_i"
+ */
+
+/* Register address for bitfield MDIO Execute Operation */
+#define HW_ATL_MDIO_EXECUTE_OPERATION_ADR 0x00000284
+/* Bitmask for bitfield MDIO Execute Operation */
+#define HW_ATL_MDIO_EXECUTE_OPERATION_MSK 0x00008000
+/* Inverted bitmask for bitfield MDIO Execute Operation */
+#define HW_ATL_MDIO_EXECUTE_OPERATION_MSKN 0xFFFF7FFF
+/* Lower bit position of bitfield MDIO Execute Operation */
+#define HW_ATL_MDIO_EXECUTE_OPERATION_SHIFT 15
+/* Width of bitfield MDIO Execute Operation */
+#define HW_ATL_MDIO_EXECUTE_OPERATION_WIDTH 1
+/* Default value of bitfield MDIO Execute Operation */
+#define HW_ATL_MDIO_EXECUTE_OPERATION_DEFAULT 0x0
+
+/* MIF Op Mode [1:0] Bitfield Definitions
+ * Preprocessor definitions for the bitfield "Op Mode [1:0]".
+ * PORT="pif_mdio_mode_i[1:0]"
+ */
+
+/* Register address for bitfield Op Mode [1:0] */
+#define HW_ATL_MDIO_OP_MODE_ADR 0x00000284
+/* Bitmask for bitfield Op Mode [1:0] */
+#define HW_ATL_MDIO_OP_MODE_MSK 0x00003000
+/* Inverted bitmask for bitfield Op Mode [1:0] */
+#define HW_ATL_MDIO_OP_MODE_MSKN 0xFFFFCFFF
+/* Lower bit position of bitfield Op Mode [1:0] */
+#define HW_ATL_MDIO_OP_MODE_SHIFT 12
+/* Width of bitfield Op Mode [1:0] */
+#define HW_ATL_MDIO_OP_MODE_WIDTH 2
+/* Default value of bitfield Op Mode [1:0] */
+#define HW_ATL_MDIO_OP_MODE_DEFAULT 0x0
+
+/* MIF PHY address Bitfield Definitions
+ * Preprocessor definitions for the bitfield "PHY address".
+ * PORT="pif_mdio_phy_addr_i[9:0]"
+ */
+
+/* Register address for bitfield PHY address */
+#define HW_ATL_MDIO_PHY_ADDRESS_ADR 0x00000284
+/* Bitmask for bitfield PHY address */
+#define HW_ATL_MDIO_PHY_ADDRESS_MSK 0x000003FF
+/* Inverted bitmask for bitfield PHY address */
+#define HW_ATL_MDIO_PHY_ADDRESS_MSKN 0xFFFFFC00
+/* Lower bit position of bitfield PHY address */
+#define HW_ATL_MDIO_PHY_ADDRESS_SHIFT 0
+/* Width of bitfield PHY address */
+#define HW_ATL_MDIO_PHY_ADDRESS_WIDTH 10
+/* Default value of bitfield PHY address */
+#define HW_ATL_MDIO_PHY_ADDRESS_DEFAULT 0x0
+
+/* MIF MDIO WriteData [F:0] Bitfield Definitions
+ * Preprocessor definitions for the bitfield "MDIO WriteData [F:0]".
+ * PORT="pif_mdio_wdata_i[15:0]"
+ */
+
+/* Register address for bitfield MDIO WriteData [F:0] */
+#define HW_ATL_MDIO_WRITE_DATA_ADR 0x00000288
+/* Bitmask for bitfield MDIO WriteData [F:0] */
+#define HW_ATL_MDIO_WRITE_DATA_MSK 0x0000FFFF
+/* Inverted bitmask for bitfield MDIO WriteData [F:0] */
+#define HW_ATL_MDIO_WRITE_DATA_MSKN 0xFFFF0000
+/* Lower bit position of bitfield MDIO WriteData [F:0] */
+#define HW_ATL_MDIO_WRITE_DATA_SHIFT 0
+/* Width of bitfield MDIO WriteData [F:0] */
+#define HW_ATL_MDIO_WRITE_DATA_WIDTH 16
+/* Default value of bitfield MDIO WriteData [F:0] */
+#define HW_ATL_MDIO_WRITE_DATA_DEFAULT 0x0
+
+/* MIF MDIO Address [F:0] Bitfield Definitions
+ * Preprocessor definitions for the bitfield "MDIO Address [F:0]".
+ * PORT="pif_mdio_addr_i[15:0]"
+ */
+
+/* Register address for bitfield MDIO Address [F:0] */
+#define HW_ATL_MDIO_ADDRESS_ADR 0x0000028C
+/* Bitmask for bitfield MDIO Address [F:0] */
+#define HW_ATL_MDIO_ADDRESS_MSK 0x0000FFFF
+/* Inverted bitmask for bitfield MDIO Address [F:0] */
+#define HW_ATL_MDIO_ADDRESS_MSKN 0xFFFF0000
+/* Lower bit position of bitfield MDIO Address [F:0] */
+#define HW_ATL_MDIO_ADDRESS_SHIFT 0
+/* Width of bitfield MDIO Address [F:0] */
+#define HW_ATL_MDIO_ADDRESS_WIDTH 16
+/* Default value of bitfield MDIO Address [F:0] */
+#define HW_ATL_MDIO_ADDRESS_DEFAULT 0x0
+
+#define HW_ATL_FW_SM_MDIO       0x0U
 #define HW_ATL_FW_SM_RAM        0x2U
 
 #endif /* HW_ATL_LLH_INTERNAL_H */