bnx2x: Revise comments and alignment

This patch correct various typos, fix comments conventions and
adds/removes a few comments.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 20 insertions, 17 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
index 2689f28010fd..210614e37b9b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
@@ -687,7 +687,7 @@ static inline void bnx2x_dcbx_update_tc_mapping(struct bnx2x *bp)
 	}
 
 	/* setup tc must be called under rtnl lock, but we can't take it here
-	 * as we are handling an attetntion on a work queue which must be
+	 * as we are handling an attention on a work queue which must be
 	 * flushed at some rtnl-locked contexts (e.g. if down)
 	 */
 	if (!test_and_set_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state))
@@ -707,7 +707,7 @@ void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state)
 			 */
 			bnx2x_dcbnl_update_applist(bp, true);
 
-			/* Read rmeote mib if dcbx is in the FW */
+			/* Read remote mib if dcbx is in the FW */
 			if (bnx2x_dcbx_read_shmem_remote_mib(bp))
 				return;
 #endif
@@ -738,7 +738,7 @@ void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state)
 			bnx2x_dcbx_update_tc_mapping(bp);
 
 			/*
-			 * allow other funtions to update their netdevices
+			 * allow other functions to update their netdevices
 			 * accordingly
 			 */
 			if (IS_MF(bp))
@@ -860,7 +860,7 @@ static void bnx2x_dcbx_admin_mib_updated_params(struct bnx2x *bp,
 			   i, DCBX_PRI_PG_GET(af->ets.pri_pg_tbl, i));
 		}
 
-		/*For IEEE admin_recommendation_bw_precentage
+		/*For IEEE admin_recommendation_bw_percentage
 		 *For IEEE admin_recommendation_ets_pg */
 		af->pfc.pri_en_bitmap = (u8)dp->admin_pfc_bitmap;
 		for (i = 0; i < DCBX_CONFIG_MAX_APP_PROTOCOL; i++) {
@@ -1070,7 +1070,7 @@ static void bnx2x_dcbx_get_num_pg_traf_type(struct bnx2x *bp,
 	bool pg_found  = false;
 	u32 i, traf_type, add_traf_type, add_pg;
 	u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority;
-	struct pg_entry_help_data *data = help_data->data; /*shotcut*/
+	struct pg_entry_help_data *data = help_data->data; /*shortcut*/
 
 	/* Set to invalid */
 	for (i = 0; i < LLFC_DRIVER_TRAFFIC_TYPE_MAX; i++)
@@ -1166,7 +1166,8 @@ static void bnx2x_dcbx_separate_pauseable_from_non(struct bnx2x *bp,
 				DCBX_PG_BW_GET(ets->pg_bw_tbl, pg_entry));
 		else
 			/* If we join a group and one is strict
-			 * than the bw rulls */
+			 * than the bw rules
+			 */
 			cos_data->data[entry].strict =
 						BNX2X_DCBX_STRICT_COS_HIGHEST;
 	}
@@ -1277,7 +1278,7 @@ static void bnx2x_dcbx_2cos_limit_cee_single_pg_to_cos_params(struct bnx2x *bp,
 		} else {
 			/* If there are only pauseable priorities or
 			 * only non-pauseable,* the lower priorities go
-			 * to the first queue and the higherpriorities go
+			 * to the first queue and the higher priorities go
 			 * to the second queue.
 			 */
 			cos_data->data[0].pausable =
@@ -1477,7 +1478,7 @@ static void bnx2x_dcbx_2cos_limit_cee_three_pg_to_cos_params(
 		 * queue and one priority goes to the second queue.
 		 *
 		 * We will join this two cases:
-		 * if one is BW limited it will go to the secoend queue
+		 * if one is BW limited it will go to the second queue
 		 * otherwise the last priority will get it
 		 */
 
@@ -1497,7 +1498,8 @@ static void bnx2x_dcbx_2cos_limit_cee_three_pg_to_cos_params(
 				    false == b_found_strict)
 					/* last entry will be handled separately
 					 * If no priority is strict than last
-					 * enty goes to last queue.*/
+					 * entry goes to last queue.
+					 */
 					entry = 1;
 				cos_data->data[entry].pri_join_mask |=
 								pri_tested;
@@ -1509,7 +1511,8 @@ static void bnx2x_dcbx_2cos_limit_cee_three_pg_to_cos_params(
 				b_found_strict = true;
 				cos_data->data[1].pri_join_mask |= pri_tested;
 				/* If we join a group and one is strict
-				 * than the bw rulls */
+				 * than the bw rules
+				 */
 				cos_data->data[1].strict =
 					BNX2X_DCBX_STRICT_COS_HIGHEST;
 			}
@@ -1838,7 +1841,7 @@ static void bnx2x_dcbx_fw_struct(struct bnx2x *bp,
 
 void bnx2x_dcbx_pmf_update(struct bnx2x *bp)
 {
-	/* if we need to syncronize DCBX result from prev PMF
+	/* if we need to synchronize DCBX result from prev PMF
 	 * read it from shmem and update bp and netdev accordingly
 	 */
 	if (SHMEM2_HAS(bp, drv_flags) &&
@@ -1932,14 +1935,14 @@ static void bnx2x_dcbnl_set_pg_tccfg_tx(struct net_device *netdev, int prio,
 		return;
 
 	/**
-	 * bw_pct ingnored -	band-width percentage devision between user
+	 * bw_pct ignored -	band-width percentage devision between user
 	 *			priorities within the same group is not
 	 *			standard and hence not supported
 	 *
-	 * prio_type igonred -	priority levels within the same group are not
+	 * prio_type ignored -	priority levels within the same group are not
 	 *			standard and hence are not supported. According
 	 *			to the standard pgid 15 is dedicated to strict
-	 *			prioirty traffic (on the port level).
+	 *			priority traffic (on the port level).
 	 *
 	 * up_map ignored
 	 */
@@ -1984,14 +1987,14 @@ static void bnx2x_dcbnl_get_pg_tccfg_tx(struct net_device *netdev, int prio,
 	DP(BNX2X_MSG_DCB, "prio = %d\n", prio);
 
 	/**
-	 * bw_pct ingnored -	band-width percentage devision between user
+	 * bw_pct ignored -	band-width percentage devision between user
 	 *			priorities within the same group is not
 	 *			standard and hence not supported
 	 *
-	 * prio_type igonred -	priority levels within the same group are not
+	 * prio_type ignored -	priority levels within the same group are not
 	 *			standard and hence are not supported. According
 	 *			to the standard pgid 15 is dedicated to strict
-	 *			prioirty traffic (on the port level).
+	 *			priority traffic (on the port level).
 	 *
 	 * up_map ignored
 	 */