diff options
| author | Merav Sicron <meravs@broadcom.com> | 2012-11-07 00:45:48 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2012-11-07 18:57:19 -0500 |
| commit | 55c11941e382cb26010138ab824216f47af37606 (patch) | |
| tree | 92724ef130081b47426919758c5fac4061e9e708 /drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | |
| parent | babc6727d537199f7fbf6dfe711ae418d399b3eb (diff) | |
bnx2x: Support loading cnic resources at run-time
This patch replaces the BCM_CNIC define with a flag which can change at run-time
and which does not use the CONFIG_CNIC kconfig option.
For the PF/hypervisor driver cnic is always supported, however allocation of
cnic resources and configuration of the HW for offload mode is done only when
the cnic module registers bnx2x.
Signed-off-by: Merav Sicron <meravs@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 1b1999d34c71..7d93adb57f31 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -2107,6 +2107,7 @@ #define NIG_REG_LLH1_ERROR_MASK 0x10090 /* [RW 8] event id for llh1 */ #define NIG_REG_LLH1_EVENT_ID 0x10088 +#define NIG_REG_LLH1_FUNC_EN 0x16104 #define NIG_REG_LLH1_FUNC_MEM 0x161c0 #define NIG_REG_LLH1_FUNC_MEM_ENABLE 0x16160 #define NIG_REG_LLH1_FUNC_MEM_SIZE 16 @@ -2302,6 +2303,15 @@ * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to * accommodate the 9 input clients to ETS arbiter. */ #define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB 0x18684 +/* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP + * packets to BRB LB interface to forward the packet to the host. All + * packets from MCP are forwarded to the network when this bit is cleared - + * regardless of the configured destination in tx_mng_destination register. + * When MCP-to-host paths for both ports 0 and 1 are disabled - the arbiter + * for BRB LB interface is bypassed and PBF LB traffic is always selected to + * send to BRB LB. + */ +#define NIG_REG_P0_TX_MNG_HOST_ENABLE 0x182f4 #define NIG_REG_P1_HWPFC_ENABLE 0x181d0 #define NIG_REG_P1_MAC_IN_EN 0x185c0 /* [RW 1] Output enable for TX MAC interface */ @@ -2418,6 +2428,12 @@ #define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB 0x186e4 /* [R 1] TX FIFO for transmitting data to MAC is empty. */ #define NIG_REG_P1_TX_MACFIFO_EMPTY 0x18594 +/* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP + * packets to BRB LB interface to forward the packet to the host. All + * packets from MCP are forwarded to the network when this bit is cleared - + * regardless of the configured destination in tx_mng_destination register. + */ +#define NIG_REG_P1_TX_MNG_HOST_ENABLE 0x182f8 /* [R 1] FIFO empty status of the MCP TX FIFO used for storing MCP packets forwarded to the host. */ #define NIG_REG_P1_TX_MNG_HOST_FIFO_EMPTY 0x182b8 |