diff options
| author | Yufeng Mo <moyufeng@huawei.com> | 2019-08-28 22:23:16 +0800 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2019-08-29 16:57:44 -0700 |
| commit | dd2956eab104185bda122af162f90b06322a05e6 (patch) | |
| tree | 1221fb5838dcd30833b4af58e1df32fa987ab1cc /drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | |
| parent | 2336f19d789223b9f42f111aab8de6ad66d12c28 (diff) | |
net: hns3: not allow SSU loopback while execute ethtool -t dev
The current loopback mode is to add 0x1F to the SMAC address
as the DMAC address and enable the promiscuous mode.
However, if the VF address is the same as the DMAC address,
the loopback test fails.
Loopback can be enabled in three places: SSU, MAC, and serdes.
By default, SSU loopback is enabled, so if the SMAC and the DMAC
are the same, the packets are looped back in the SSU. If SSU loopback
is disabled, packets can reach MAC even if SMAC is the same as DMAC.
Therefore, this patch disables the SSU loopback before the loopback
test. In this way, the SMAC and DMAC can be the same, and the
promiscuous mode does not need to be enabled. And this is not
valid in version 0x20.
This patch also uses a macro to replace 0x1F.
Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Reviewed-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h')
| -rw-r--r-- | drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h index 29979be9e33a..4821fe08b5e4 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h @@ -223,6 +223,9 @@ enum hclge_opcode_type { HCLGE_OPC_MAC_ETHTYPE_ADD = 0x1010, HCLGE_OPC_MAC_ETHTYPE_REMOVE = 0x1011, + /* MAC VLAN commands */ + HCLGE_OPC_MAC_VLAN_SWITCH_PARAM = 0x1033, + /* VLAN commands */ HCLGE_OPC_VLAN_FILTER_CTRL = 0x1100, HCLGE_OPC_VLAN_FILTER_PF_CFG = 0x1101, @@ -771,6 +774,31 @@ struct hclge_vlan_filter_vf_cfg_cmd { u8 vf_bitmap[16]; }; +#define HCLGE_SWITCH_ANTI_SPOOF_B 0U +#define HCLGE_SWITCH_ALW_LPBK_B 1U +#define HCLGE_SWITCH_ALW_LCL_LPBK_B 2U +#define HCLGE_SWITCH_ALW_DST_OVRD_B 3U +#define HCLGE_SWITCH_NO_MASK 0x0 +#define HCLGE_SWITCH_ANTI_SPOOF_MASK 0xFE +#define HCLGE_SWITCH_ALW_LPBK_MASK 0xFD +#define HCLGE_SWITCH_ALW_LCL_LPBK_MASK 0xFB +#define HCLGE_SWITCH_LW_DST_OVRD_MASK 0xF7 + +struct hclge_mac_vlan_switch_cmd { + u8 roce_sel; + u8 rsv1[3]; + __le32 func_id; + u8 switch_param; + u8 rsv2[3]; + u8 param_mask; + u8 rsv3[11]; +}; + +enum hclge_mac_vlan_cfg_sel { + HCLGE_MAC_VLAN_NIC_SEL = 0, + HCLGE_MAC_VLAN_ROCE_SEL, +}; + #define HCLGE_ACCEPT_TAG1_B 0 #define HCLGE_ACCEPT_UNTAG1_B 1 #define HCLGE_PORT_INS_TAG1_EN_B 2 |