i40e: add support for PTP external synchronization clock

Add support for external synchronization clock via GPIOs.
1PPS signals are handled via the dedicated 3 GPIOs: SDP3_2,
SDP3_3 and GPIO_4.
Previously it was not possible to use the external PTP
synchronization clock.
All possible HW configurations are supported.
	SDP3_2,	SDP3_3,	GPIO_4
	off,	off,	off
	off,	in_A,	off
	off,	out_A,	off
	off,	in_B,	off
	off,	out_B,	off
	in_A,	off,	off
	in_A,	in_B,	off
	in_A,	out_B,	off
	out_A,	off,	off
	out_A,	in_B,	off
	in_B,	off,	off
	in_B,	in_A,	off
	in_B,	out_A,	off
	out_B,	off,	off
	out_B,	in_A,	off
	off,	off,	in_A
	off,	out_A,	in_A
	off,	in_B,	in_A
	off,	out_B,	in_A
	out_A,	off,	in_A
	out_A,	in_B,	in_A
	in_B,	off,	in_A
	in_B,	out_A,	in_A
	out_B,	off,	in_A
	off,	off,	out_A
	off,	in_A,	out_A
	off,	in_B,	out_A
	off,	out_B,	out_A
	in_A,	off,	out_A
	in_A,	in_B,	out_A
	in_A,	out_B,	out_A
	in_B,	off,	out_A
	in_B,	in_A,	out_A
	out_B,	off,	out_A
	out_B,	in_A,	out_A
	off,	off,	in_B
	off,	in_A,	in_B
	off,	out_A,	in_B
	off,	out_B,	in_B
	in_A,	off,	in_B
	in_A,	out_B,	in_B
	out_A,	off,	in_B
	out_B,	off,	in_B
	out_B,	in_A,	in_B
	off,	off,	out_B
	off,	in_A,	out_B
	off,	out_A,	out_B
	off,	in_B,	out_B
	in_A,	off,	out_B
	in_A,	in_B,	out_B
	out_A,	off,	out_B
	out_A,	in_B,	out_B
	in_B,	off,	out_B
	in_B,	in_A,	out_B
	in_B,	out_A,	out_B

Tested with oscilloscope, 1PPS generator and ts2phc.

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Tested-by: Ashish K <ashishx.k@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 24 insertions, 4 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 861e59a350bd..53c1fbeee62a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4079,10 +4079,13 @@ static irqreturn_t i40e_intr(int irq, void *data)
 	if (icr0 & I40E_PFINT_ICR0_TIMESYNC_MASK) {
 		u32 prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_0);
 
-		if (prttsyn_stat & I40E_PRTTSYN_STAT_0_TXTIME_MASK) {
-			icr0 &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK;
+		if (prttsyn_stat & I40E_PRTTSYN_STAT_0_EVENT0_MASK)
+			schedule_work(&pf->ptp_extts0_work);
+
+		if (prttsyn_stat & I40E_PRTTSYN_STAT_0_TXTIME_MASK)
 			i40e_ptp_tx_hwtstamp(pf);
-		}
+
+		icr0 &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK;
 	}
 
 	/* If a critical error is pending we have no choice but to reset the
@@ -15168,6 +15171,22 @@ err_switch_setup:
 }
 
 /**
+ * i40e_set_subsystem_device_id - set subsystem device id
+ * @hw: pointer to the hardware info
+ *
+ * Set PCI subsystem device id either from a pci_dev structure or
+ * a specific FW register.
+ **/
+static inline void i40e_set_subsystem_device_id(struct i40e_hw *hw)
+{
+	struct pci_dev *pdev = ((struct i40e_pf *)hw->back)->pdev;
+
+	hw->subsystem_device_id = pdev->subsystem_device ?
+		pdev->subsystem_device :
+		(ushort)(rd32(hw, I40E_PFPCI_SUBSYSID) & USHRT_MAX);
+}
+
+/**
  * i40e_probe - Device initialization routine
  * @pdev: PCI device information struct
  * @ent: entry in i40e_pci_tbl
@@ -15262,7 +15281,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	hw->device_id = pdev->device;
 	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
 	hw->subsystem_vendor_id = pdev->subsystem_vendor;
-	hw->subsystem_device_id = pdev->subsystem_device;
+	i40e_set_subsystem_device_id(hw);
 	hw->bus.device = PCI_SLOT(pdev->devfn);
 	hw->bus.func = PCI_FUNC(pdev->devfn);
 	hw->bus.bus_id = pdev->bus->number;
@@ -15442,6 +15461,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (is_valid_ether_addr(hw->mac.port_addr))
 		pf->hw_features |= I40E_HW_PORT_ID_VALID;
 
+	i40e_ptp_alloc_pins(pf);
 	pci_set_drvdata(pdev, pf);
 	pci_save_state(pdev);