Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

11 files changed, 238 insertions, 140 deletions

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 7a73510e547c..adb33e2a0137 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -45,8 +45,6 @@ static s32  igb_get_cfg_done_82575(struct e1000_hw *);
 static s32  igb_init_hw_82575(struct e1000_hw *);
 static s32  igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
 static s32  igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
-static s32  igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
-static s32  igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
 static s32  igb_reset_hw_82575(struct e1000_hw *);
 static s32  igb_reset_hw_82580(struct e1000_hw *);
 static s32  igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
@@ -205,13 +203,10 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
 		case e1000_82580:
 		case e1000_i350:
 		case e1000_i354:
-			phy->ops.read_reg = igb_read_phy_reg_82580;
-			phy->ops.write_reg = igb_write_phy_reg_82580;
-			break;
 		case e1000_i210:
 		case e1000_i211:
-			phy->ops.read_reg = igb_read_phy_reg_gs40g;
-			phy->ops.write_reg = igb_write_phy_reg_gs40g;
+			phy->ops.read_reg = igb_read_phy_reg_82580;
+			phy->ops.write_reg = igb_write_phy_reg_82580;
 			break;
 		default:
 			phy->ops.read_reg = igb_read_phy_reg_igp;
@@ -272,6 +267,11 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
 			if (ret_val)
 				goto out;
 		}
+		if (phy->id == M88E1543_E_PHY_ID) {
+			ret_val = igb_initialize_M88E1543_phy(hw);
+			if (ret_val)
+				goto out;
+		}
 		break;
 	case IGP03E1000_E_PHY_ID:
 		phy->type = e1000_phy_igp_3;
@@ -294,6 +294,7 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
 	case I210_I_PHY_ID:
 		phy->type		= e1000_phy_i210;
 		phy->ops.check_polarity	= igb_check_polarity_m88;
+		phy->ops.get_cfg_done	= igb_get_cfg_done_i210;
 		phy->ops.get_phy_info	= igb_get_phy_info_m88;
 		phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
 		phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
@@ -925,6 +926,8 @@ static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
 
 	if (phy->id == M88E1512_E_PHY_ID)
 		ret_val = igb_initialize_M88E1512_phy(hw);
+	if (phy->id == M88E1543_E_PHY_ID)
+		ret_val = igb_initialize_M88E1543_phy(hw);
 out:
 	return ret_val;
 }
@@ -2145,7 +2148,7 @@ void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
  *  Reads the MDI control register in the PHY at offset and stores the
  *  information read to data.
  **/
-static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
 {
 	s32 ret_val;
 
@@ -2169,7 +2172,7 @@ out:
  *
  *  Writes data to MDI control register in the PHY at offset.
  **/
-static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
+s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
 {
 	s32 ret_val;
 
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index b1915043bc0c..c3c598c347a9 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -927,7 +927,10 @@
 
 /* Intel i347-AT4 Registers */
 
-#define I347AT4_PCDL                   0x10 /* PHY Cable Diagnostics Length */
+#define I347AT4_PCDL0                  0x10 /* Pair 0 PHY Cable Diagnostics Length */
+#define I347AT4_PCDL1                  0x11 /* Pair 1 PHY Cable Diagnostics Length */
+#define I347AT4_PCDL2                  0x12 /* Pair 2 PHY Cable Diagnostics Length */
+#define I347AT4_PCDL3                  0x13 /* Pair 3 PHY Cable Diagnostics Length */
 #define I347AT4_PCDC                   0x15 /* PHY Cable Diagnostics Control */
 #define I347AT4_PAGE_SELECT            0x16
 
@@ -990,6 +993,7 @@
 #define E1000_M88E1543_PAGE_ADDR	0x16       /* Page Offset Register */
 #define E1000_M88E1543_EEE_CTRL_1	0x0
 #define E1000_M88E1543_EEE_CTRL_1_MS	0x0001     /* EEE Master/Slave */
+#define E1000_M88E1543_FIBER_CTRL	0x0
 #define E1000_EEE_ADV_DEV_I354		7
 #define E1000_EEE_ADV_ADDR_I354		60
 #define E1000_EEE_ADV_100_SUPPORTED	(1 << 1)   /* 100BaseTx EEE Supported */
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index 2003b3756ba2..4034207eb5cc 100644
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -441,6 +441,7 @@ struct e1000_phy_info {
 	u16 cable_length;
 	u16 max_cable_length;
 	u16 min_cable_length;
+	u16 pair_length[4];
 
 	u8 mdix;
 
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index 65d931669f81..8aa798737d4d 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -861,10 +861,10 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw)
 	if (ret_val)
 		nvm_word = E1000_INVM_DEFAULT_AL;
 	tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
+	igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, E1000_PHY_PLL_FREQ_PAGE);
 	for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
 		/* check current state directly from internal PHY */
-		igb_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE |
-					 E1000_PHY_PLL_FREQ_REG), &phy_word);
+		igb_read_phy_reg_82580(hw, E1000_PHY_PLL_FREQ_REG, &phy_word);
 		if ((phy_word & E1000_PHY_PLL_UNCONF)
 		    != E1000_PHY_PLL_UNCONF) {
 			ret_val = 0;
@@ -896,7 +896,35 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw)
 		/* restore WUC register */
 		wr32(E1000_WUC, wuc);
 	}
+	igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, 0);
 	/* restore MDICNFG setting */
 	wr32(E1000_MDICNFG, mdicnfg);
 	return ret_val;
 }
+
+/**
+ *  igb_get_cfg_done_i210 - Read config done bit
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the management control register for the config done bit for
+ *  completion status.  NOTE: silicon which is EEPROM-less will fail trying
+ *  to read the config done bit, so an error is *ONLY* logged and returns
+ *  0.  If we were to return with error, EEPROM-less silicon
+ *  would not be able to be reset or change link.
+ **/
+s32 igb_get_cfg_done_i210(struct e1000_hw *hw)
+{
+	s32 timeout = PHY_CFG_TIMEOUT;
+	u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+	while (timeout) {
+		if (rd32(E1000_EEMNGCTL_I210) & mask)
+			break;
+		usleep_range(1000, 2000);
+		timeout--;
+	}
+	if (!timeout)
+		hw_dbg("MNG configuration cycle has not completed.\n");
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h
index 3442b6357d01..b2964a2a60b1 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.h
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.h
@@ -34,6 +34,7 @@ s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data);
 s32 igb_init_nvm_params_i210(struct e1000_hw *hw);
 bool igb_get_flash_presence_i210(struct e1000_hw *hw);
 s32 igb_pll_workaround_i210(struct e1000_hw *hw);
+s32 igb_get_cfg_done_i210(struct e1000_hw *hw);
 
 #define E1000_STM_OPCODE		0xDB00
 #define E1000_EEPROM_FLASH_SIZE_WORD	0x11
@@ -84,7 +85,7 @@ enum E1000_INVM_STRUCTURE_TYPE {
 #define E1000_PCI_PMCSR_D3		0x03
 #define E1000_MAX_PLL_TRIES		5
 #define E1000_PHY_PLL_UNCONF		0xFF
-#define E1000_PHY_PLL_FREQ_PAGE		0xFC0000
+#define E1000_PHY_PLL_FREQ_PAGE		0xFC
 #define E1000_PHY_PLL_FREQ_REG		0x000E
 #define E1000_INVM_DEFAULT_AL		0x202F
 #define E1000_INVM_AUTOLOAD		0x0A
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 23ec28f43f6d..5b54254aed4f 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -1717,59 +1717,76 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
 	u16 phy_data, phy_data2, index, default_page, is_cm;
+	int len_tot = 0;
+	u16 len_min;
+	u16 len_max;
 
 	switch (hw->phy.id) {
+	case M88E1543_E_PHY_ID:
+	case M88E1512_E_PHY_ID:
+	case I347AT4_E_PHY_ID:
 	case I210_I_PHY_ID:
-		/* Get cable length from PHY Cable Diagnostics Control Reg */
-		ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
-					    (I347AT4_PCDL + phy->addr),
-					    &phy_data);
+		/* Remember the original page select and set it to 7 */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+					    &default_page);
 		if (ret_val)
-			return ret_val;
+			goto out;
+
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07);
+		if (ret_val)
+			goto out;
 
 		/* Check if the unit of cable length is meters or cm */
-		ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
-					    I347AT4_PCDC, &phy_data2);
+		ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2);
 		if (ret_val)
-			return ret_val;
+			goto out;
 
 		is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
 
-		/* Populate the phy structure with cable length in meters */
-		phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
-		phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
-		phy->cable_length = phy_data / (is_cm ? 100 : 1);
-		break;
-	case M88E1543_E_PHY_ID:
-	case M88E1512_E_PHY_ID:
-	case I347AT4_E_PHY_ID:
-		/* Remember the original page select and set it to 7 */
-		ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
-					    &default_page);
+		/* Get cable length from Pair 0 length Regs */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PCDL0, &phy_data);
 		if (ret_val)
 			goto out;
 
-		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07);
+		phy->pair_length[0] = phy_data / (is_cm ? 100 : 1);
+		len_tot = phy->pair_length[0];
+		len_min = phy->pair_length[0];
+		len_max = phy->pair_length[0];
+
+		/* Get cable length from Pair 1 length Regs */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PCDL1, &phy_data);
 		if (ret_val)
 			goto out;
 
-		/* Get cable length from PHY Cable Diagnostics Control Reg */
-		ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr),
-					    &phy_data);
+		phy->pair_length[1] = phy_data / (is_cm ? 100 : 1);
+		len_tot += phy->pair_length[1];
+		len_min = min(len_min, phy->pair_length[1]);
+		len_max = max(len_max, phy->pair_length[1]);
+
+		/* Get cable length from Pair 2 length Regs */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PCDL2, &phy_data);
 		if (ret_val)
 			goto out;
 
-		/* Check if the unit of cable length is meters or cm */
-		ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2);
+		phy->pair_length[2] = phy_data / (is_cm ? 100 : 1);
+		len_tot += phy->pair_length[2];
+		len_min = min(len_min, phy->pair_length[2]);
+		len_max = max(len_max, phy->pair_length[2]);
+
+		/* Get cable length from Pair 3 length Regs */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PCDL3, &phy_data);
 		if (ret_val)
 			goto out;
 
-		is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+		phy->pair_length[3] = phy_data / (is_cm ? 100 : 1);
+		len_tot += phy->pair_length[3];
+		len_min = min(len_min, phy->pair_length[3]);
+		len_max = max(len_max, phy->pair_length[3]);
 
 		/* Populate the phy structure with cable length in meters */
-		phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
-		phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
-		phy->cable_length = phy_data / (is_cm ? 100 : 1);
+		phy->min_cable_length = len_min;
+		phy->max_cable_length = len_max;
+		phy->cable_length = len_tot / 4;
 
 		/* Reset the page selec to its original value */
 		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
@@ -2278,6 +2295,100 @@ out:
 }
 
 /**
+ *  igb_initialize_M88E1543_phy - Initialize M88E1512 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize Marvell 1543 to work correctly with Avoton.
+ **/
+s32 igb_initialize_M88E1543_phy(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
+
+	/* Switch to PHY page 0xFF. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xDC0C);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 0xFB. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0x0C0D);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 0x12. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12);
+	if (ret_val)
+		goto out;
+
+	/* Change mode to SGMII-to-Copper */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 1. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x1);
+	if (ret_val)
+		goto out;
+
+	/* Change mode to 1000BASE-X/SGMII and autoneg enable */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_FIBER_CTRL, 0x9140);
+	if (ret_val)
+		goto out;
+
+	/* Return the PHY to page 0. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
+	if (ret_val)
+		goto out;
+
+	ret_val = igb_phy_sw_reset(hw);
+	if (ret_val) {
+		hw_dbg("Error committing the PHY changes\n");
+		return ret_val;
+	}
+
+	/* msec_delay(1000); */
+	usleep_range(1000, 2000);
+out:
+	return ret_val;
+}
+
+/**
  * igb_power_up_phy_copper - Restore copper link in case of PHY power down
  * @hw: pointer to the HW structure
  *
@@ -2494,66 +2605,6 @@ out:
 }
 
 /**
- *  igb_write_phy_reg_gs40g - Write GS40G PHY register
- *  @hw: pointer to the HW structure
- *  @offset: lower half is register offset to write to
- *     upper half is page to use.
- *  @data: data to write at register offset
- *
- *  Acquires semaphore, if necessary, then writes the data to PHY register
- *  at the offset.  Release any acquired semaphores before exiting.
- **/
-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	s32 ret_val;
-	u16 page = offset >> GS40G_PAGE_SHIFT;
-
-	offset = offset & GS40G_OFFSET_MASK;
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-	if (ret_val)
-		goto release;
-	ret_val = igb_write_phy_reg_mdic(hw, offset, data);
-
-release:
-	hw->phy.ops.release(hw);
-	return ret_val;
-}
-
-/**
- *  igb_read_phy_reg_gs40g - Read GS40G  PHY register
- *  @hw: pointer to the HW structure
- *  @offset: lower half is register offset to read to
- *     upper half is page to use.
- *  @data: data to read at register offset
- *
- *  Acquires semaphore, if necessary, then reads the data in the PHY register
- *  at the offset.  Release any acquired semaphores before exiting.
- **/
-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	s32 ret_val;
-	u16 page = offset >> GS40G_PAGE_SHIFT;
-
-	offset = offset & GS40G_OFFSET_MASK;
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-	if (ret_val)
-		goto release;
-	ret_val = igb_read_phy_reg_mdic(hw, offset, data);
-
-release:
-	hw->phy.ops.release(hw);
-	return ret_val;
-}
-
-/**
  *  igb_set_master_slave_mode - Setup PHY for Master/slave mode
  *  @hw: pointer to the HW structure
  *
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h
index 24d55edbb0e3..969a6ddafa3b 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
@@ -62,6 +62,7 @@ void igb_power_up_phy_copper(struct e1000_hw *hw);
 void igb_power_down_phy_copper(struct e1000_hw *hw);
 s32  igb_phy_init_script_igp3(struct e1000_hw *hw);
 s32  igb_initialize_M88E1512_phy(struct e1000_hw *hw);
+s32  igb_initialize_M88E1543_phy(struct e1000_hw *hw);
 s32  igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
 s32  igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
 s32  igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
@@ -71,8 +72,8 @@ s32  igb_copper_link_setup_82580(struct e1000_hw *hw);
 s32  igb_get_phy_info_82580(struct e1000_hw *hw);
 s32  igb_phy_force_speed_duplex_82580(struct e1000_hw *hw);
 s32  igb_get_cable_length_82580(struct e1000_hw *hw);
-s32  igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
-s32  igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
+s32  igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data);
 s32  igb_check_polarity_m88(struct e1000_hw *hw);
 
 /* IGP01E1000 Specific Registers */
@@ -143,17 +144,6 @@ s32  igb_check_polarity_m88(struct e1000_hw *hw);
 
 #define E1000_CABLE_LENGTH_UNDEFINED      0xFF
 
-/* GS40G - I210 PHY defines */
-#define GS40G_PAGE_SELECT		0x16
-#define GS40G_PAGE_SHIFT		16
-#define GS40G_OFFSET_MASK		0xFFFF
-#define GS40G_PAGE_2			0x20000
-#define GS40G_MAC_REG2			0x15
-#define GS40G_MAC_LB			0x4140
-#define GS40G_MAC_SPEED_1G		0X0006
-#define GS40G_COPPER_SPEC		0x0010
-#define GS40G_LINE_LB			0x4000
-
 /* SFP modules ID memory locations */
 #define E1000_SFF_IDENTIFIER_OFFSET	0x00
 #define E1000_SFF_IDENTIFIER_SFF	0x02
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index 4af2870e49f8..21d9d02885cb 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -66,6 +66,7 @@
 #define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
 #define E1000_PBS      0x01008  /* Packet Buffer Size */
 #define E1000_EEMNGCTL 0x01010  /* MNG EEprom Control */
+#define E1000_EEMNGCTL_I210 0x12030  /* MNG EEprom Control */
 #define E1000_EEARBC_I210 0x12024  /* EEPROM Auto Read Bus Control */
 #define E1000_EEWR     0x0102C  /* EEPROM Write Register - RW */
 #define E1000_I2CCMD   0x01028  /* SFPI2C Command Register - RW */
@@ -385,8 +386,7 @@ do { \
 #define array_wr32(reg, offset, value) \
 	wr32((reg) + ((offset) << 2), (value))
 
-#define array_rd32(reg, offset) \
-	(readl(hw->hw_addr + reg + ((offset) << 2)))
+#define array_rd32(reg, offset) (igb_rd32(hw, reg + ((offset) << 2)))
 
 /* DMA Coalescing registers */
 #define E1000_PCIEMISC	0x05BB8 /* PCIE misc config register */
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 1a2f1cc44b28..e3cb93bdb21a 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -389,6 +389,8 @@ struct igb_adapter {
 	u16 link_speed;
 	u16 link_duplex;
 
+	u8 __iomem *io_addr; /* Mainly for iounmap use */
+
 	struct work_struct reset_task;
 	struct work_struct watchdog_task;
 	bool fc_autoneg;
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 2529bc625de4..1d329f1d047b 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -127,10 +127,20 @@ static const struct igb_stats igb_gstrings_net_stats[] = {
 #define IGB_STATS_LEN \
 	(IGB_GLOBAL_STATS_LEN + IGB_NETDEV_STATS_LEN + IGB_QUEUE_STATS_LEN)
 
+enum igb_diagnostics_results {
+	TEST_REG = 0,
+	TEST_EEP,
+	TEST_IRQ,
+	TEST_LOOP,
+	TEST_LINK
+};
+
 static const char igb_gstrings_test[][ETH_GSTRING_LEN] = {
-	"Register test  (offline)", "Eeprom test    (offline)",
-	"Interrupt test (offline)", "Loopback test  (offline)",
-	"Link test   (on/offline)"
+	[TEST_REG]  = "Register test  (offline)",
+	[TEST_EEP]  = "Eeprom test    (offline)",
+	[TEST_IRQ]  = "Interrupt test (offline)",
+	[TEST_LOOP] = "Loopback test  (offline)",
+	[TEST_LINK] = "Link test   (on/offline)"
 };
 #define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN)
 
@@ -2002,7 +2012,7 @@ static void igb_diag_test(struct net_device *netdev,
 		/* Link test performed before hardware reset so autoneg doesn't
 		 * interfere with test result
 		 */
-		if (igb_link_test(adapter, &data[4]))
+		if (igb_link_test(adapter, &data[TEST_LINK]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		if (if_running)
@@ -2011,21 +2021,21 @@ static void igb_diag_test(struct net_device *netdev,
 		else
 			igb_reset(adapter);
 
-		if (igb_reg_test(adapter, &data[0]))
+		if (igb_reg_test(adapter, &data[TEST_REG]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		igb_reset(adapter);
-		if (igb_eeprom_test(adapter, &data[1]))
+		if (igb_eeprom_test(adapter, &data[TEST_EEP]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		igb_reset(adapter);
-		if (igb_intr_test(adapter, &data[2]))
+		if (igb_intr_test(adapter, &data[TEST_IRQ]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		igb_reset(adapter);
 		/* power up link for loopback test */
 		igb_power_up_link(adapter);
-		if (igb_loopback_test(adapter, &data[3]))
+		if (igb_loopback_test(adapter, &data[TEST_LOOP]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		/* restore speed, duplex, autoneg settings */
@@ -2045,16 +2055,16 @@ static void igb_diag_test(struct net_device *netdev,
 		dev_info(&adapter->pdev->dev, "online testing starting\n");
 
 		/* PHY is powered down when interface is down */
-		if (if_running && igb_link_test(adapter, &data[4]))
+		if (if_running && igb_link_test(adapter, &data[TEST_LINK]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 		else
-			data[4] = 0;
+			data[TEST_LINK] = 0;
 
 		/* Online tests aren't run; pass by default */
-		data[0] = 0;
-		data[1] = 0;
-		data[2] = 0;
-		data[3] = 0;
+		data[TEST_REG] = 0;
+		data[TEST_EEP] = 0;
+		data[TEST_IRQ] = 0;
+		data[TEST_LOOP] = 0;
 
 		clear_bit(__IGB_TESTING, &adapter->state);
 	}
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ea7b09887245..31e5f3942839 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -946,7 +946,6 @@ static void igb_configure_msix(struct igb_adapter *adapter)
 static int igb_request_msix(struct igb_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	struct e1000_hw *hw = &adapter->hw;
 	int i, err = 0, vector = 0, free_vector = 0;
 
 	err = request_irq(adapter->msix_entries[vector].vector,
@@ -959,7 +958,7 @@ static int igb_request_msix(struct igb_adapter *adapter)
 
 		vector++;
 
-		q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
+		q_vector->itr_register = adapter->io_addr + E1000_EITR(vector);
 
 		if (q_vector->rx.ring && q_vector->tx.ring)
 			sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
@@ -1230,7 +1229,7 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,
 	q_vector->tx.work_limit = adapter->tx_work_limit;
 
 	/* initialize ITR configuration */
-	q_vector->itr_register = adapter->hw.hw_addr + E1000_EITR(0);
+	q_vector->itr_register = adapter->io_addr + E1000_EITR(0);
 	q_vector->itr_val = IGB_START_ITR;
 
 	/* initialize pointer to rings */
@@ -2294,9 +2293,11 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
 
 	err = -EIO;
-	hw->hw_addr = pci_iomap(pdev, 0, 0);
-	if (!hw->hw_addr)
+	adapter->io_addr = pci_iomap(pdev, 0, 0);
+	if (!adapter->io_addr)
 		goto err_ioremap;
+	/* hw->hw_addr can be altered, we'll use adapter->io_addr for unmap */
+	hw->hw_addr = adapter->io_addr;
 
 	netdev->netdev_ops = &igb_netdev_ops;
 	igb_set_ethtool_ops(netdev);
@@ -2378,8 +2379,8 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	if (hw->mac.type >= e1000_82576) {
-		netdev->hw_features |= NETIF_F_SCTP_CSUM;
-		netdev->features |= NETIF_F_SCTP_CSUM;
+		netdev->hw_features |= NETIF_F_SCTP_CRC;
+		netdev->features |= NETIF_F_SCTP_CRC;
 	}
 
 	netdev->priv_flags |= IFF_UNICAST_FLT;
@@ -2656,7 +2657,7 @@ err_sw_init:
 #ifdef CONFIG_PCI_IOV
 	igb_disable_sriov(pdev);
 #endif
-	pci_iounmap(pdev, hw->hw_addr);
+	pci_iounmap(pdev, adapter->io_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
@@ -2823,7 +2824,7 @@ static void igb_remove(struct pci_dev *pdev)
 
 	igb_clear_interrupt_scheme(adapter);
 
-	pci_iounmap(pdev, hw->hw_addr);
+	pci_iounmap(pdev, adapter->io_addr);
 	if (hw->flash_address)
 		iounmap(hw->flash_address);
 	pci_release_selected_regions(pdev,
@@ -2856,6 +2857,13 @@ static void igb_probe_vfs(struct igb_adapter *adapter)
 	if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
 		return;
 
+	/* Of the below we really only want the effect of getting
+	 * IGB_FLAG_HAS_MSIX set (if available), without which
+	 * igb_enable_sriov() has no effect.
+	 */
+	igb_set_interrupt_capability(adapter, true);
+	igb_reset_interrupt_capability(adapter);
+
 	pci_sriov_set_totalvfs(pdev, 7);
 	igb_enable_sriov(pdev, max_vfs);