net: mvpp2: add a debugfs interface for the Header Parser

Marvell PPv2 Packer Header Parser has a TCAM based filter, that is not
trivial to configure and debug. Being able to dump TCAM entries from
userspace can be really helpful to help development of new features
and debug existing ones.

This commit adds a basic debugfs interface for the PPv2 driver, focusing
on TCAM related features.

<mnt>/mvpp2/ --- f2000000.ethernet
              \- f4000000.ethernet --- parser --- 000 ...
                                    |          \- 001
                                    |          \- ...
                                    |          \- 255 --- ai
                                    |                  \- header_data
                                    |                  \- lookup_id
                                    |                  \- sram
                                    |                  \- valid
                                    \- eth1 ...
                                    \- eth2 --- mac_filter
                                             \- parser_entries
                                             \- vid_filter

There's one directory per PPv2 instance, named after pdev->name to make
sure names are uniques. In each of these directories, there's :

 - one directory per interface on the controller, each containing :

   - "mac_filter", which lists all filtered addresses for this port
     (based on TCAM, not on the kernel's uc / mc lists)

   - "parser_entries", which lists the indices of all valid TCAM
      entries that have this port in their port map

   - "vid_filter", which lists the vids allowed on this port, based on
     TCAM

 - one "parser" directory (the parser is common to all ports), containing :

   - one directory per TCAM entry (256 of them, from 0 to 255), each
     containing :

     - "ai" : Contains the 1 byte Additional Info field from TCAM, and

     - "header_data" : Contains the 8 bytes Header Data extracted from
       the packet

     - "lookup_id" : Contains the 4 bits LU_ID

     - "sram" : contains the raw SRAM data, which is the result of the TCAM
		lookup. This readonly at the moment.

     - "valid" : Indicates if the entry is valid of not.

All entries are read-only, and everything is output in hex form.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 6 insertions, 6 deletions

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index 2a8d25139a8f..f133d820f0fa 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -43,8 +43,8 @@ static int mvpp2_prs_hw_write(struct mvpp2 *priv, struct mvpp2_prs_entry *pe)
 }
 
 /* Initialize tcam entry from hw */
-static int mvpp2_prs_init_from_hw(struct mvpp2 *priv,
-				  struct mvpp2_prs_entry *pe, int tid)
+int mvpp2_prs_init_from_hw(struct mvpp2 *priv, struct mvpp2_prs_entry *pe,
+			   int tid)
 {
 	int i;
 
@@ -126,7 +126,7 @@ static void mvpp2_prs_tcam_port_map_set(struct mvpp2_prs_entry *pe,
 }
 
 /* Obtain port map from tcam sw entry */
-static unsigned int mvpp2_prs_tcam_port_map_get(struct mvpp2_prs_entry *pe)
+unsigned int mvpp2_prs_tcam_port_map_get(struct mvpp2_prs_entry *pe)
 {
 	return (~pe->tcam[MVPP2_PRS_TCAM_PORT_WORD] >> 24) & MVPP2_PRS_PORT_MASK;
 }
@@ -145,9 +145,9 @@ static void mvpp2_prs_tcam_data_byte_set(struct mvpp2_prs_entry *pe,
 }
 
 /* Get byte of data and its enable bits from tcam sw entry */
-static void mvpp2_prs_tcam_data_byte_get(struct mvpp2_prs_entry *pe,
-					 unsigned int offs, unsigned char *byte,
-					 unsigned char *enable)
+void mvpp2_prs_tcam_data_byte_get(struct mvpp2_prs_entry *pe,
+				  unsigned int offs, unsigned char *byte,
+				  unsigned char *enable)
 {
 	int pos = MVPP2_PRS_BYTE_IN_WORD(offs) * BITS_PER_BYTE;