summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/stmicro
diff options
context:
space:
mode:
authorGiuseppe CAVALLARO <peppe.cavallaro@st.com>2014-11-18 09:47:01 +0100
committerDavid S. Miller <davem@davemloft.net>2014-11-19 15:04:58 -0500
commit732fdf0e5253e9d3687d332630e8468a701bebb2 (patch)
treee194b86f7a7efd43827bc72f69ede8338cbcd608 /drivers/net/ethernet/stmicro
parent915c199fc8cde9f9a5af19c1ea8c7c3c075d60e1 (diff)
stmmac: review driver when run kernel-doc
When run ./scripts/kernel-doc several warnings are reported so this patch fix them. Also it reviews many comments and adds new ones. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/stmicro')
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c15
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c151
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c43
4 files changed, 142 insertions, 69 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
index ea4069276444..0e137751e76e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
@@ -1,4 +1,4 @@
-/**
+/*
* dwmac-sti.c - STMicroelectronics DWMAC Specific Glue layer
*
* Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
@@ -37,9 +37,8 @@
#define IS_PHY_IF_MODE_GBIT(iface) (IS_PHY_IF_MODE_RGMII(iface) || \
iface == PHY_INTERFACE_MODE_GMII)
-/* STiH4xx register definitions (STiH415/STiH416/STiH407/STiH410 families) */
-
-/**
+/* STiH4xx register definitions (STiH415/STiH416/STiH407/STiH410 families)
+ *
* Below table summarizes the clock requirement and clock sources for
* supported phy interface modes with link speeds.
* ________________________________________________
@@ -78,9 +77,7 @@
#define STIH4XX_ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7)
#define STIH4XX_ETH_SEL_TXCLK_NOT_CLK125 BIT(6)
-/* STiD127 register definitions */
-
-/**
+/* STiD127 register definitions
*-----------------------
* src |BIT(6)| BIT(7)|
*-----------------------
@@ -106,13 +103,13 @@
#define EN_MASK GENMASK(1, 1)
#define EN BIT(1)
-/**
+/*
* 3 bits [4:2]
* 000-GMII/MII
* 001-RGMII
* 010-SGMII
* 100-RMII
-*/
+ */
#define MII_PHY_SEL_MASK GENMASK(4, 2)
#define ETH_PHY_SEL_RMII BIT(4)
#define ETH_PHY_SEL_SGMII BIT(3)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
index a26bda274c66..c5ea9ab75b03 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -1,4 +1,4 @@
-/**
+/*
* dwmac-sunxi.c - Allwinner sunxi DWMAC specific glue layer
*
* Copyright (C) 2013 Chen-Yu Tsai
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0f1c146fcce1..118a427d1942 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -125,8 +125,8 @@ static void stmmac_exit_fs(void);
/**
* stmmac_verify_args - verify the driver parameters.
- * Description: it verifies if some wrong parameter is passed to the driver.
- * Note that wrong parameters are replaced with the default values.
+ * Description: it checks the driver parameters and set a default in case of
+ * errors.
*/
static void stmmac_verify_args(void)
{
@@ -204,7 +204,7 @@ static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
}
/**
- * stmmac_hw_fix_mac_speed: callback for speed selection
+ * stmmac_hw_fix_mac_speed - callback for speed selection
* @priv: driver private structure
* Description: on some platforms (e.g. ST), some HW system configuraton
* registers have to be set according to the link speed negotiated.
@@ -218,9 +218,10 @@ static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
}
/**
- * stmmac_enable_eee_mode: Check and enter in LPI mode
+ * stmmac_enable_eee_mode - check and enter in LPI mode
* @priv: driver private structure
- * Description: this function is to verify and enter in LPI mode for EEE.
+ * Description: this function is to verify and enter in LPI mode in case of
+ * EEE.
*/
static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
{
@@ -231,7 +232,7 @@ static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
}
/**
- * stmmac_disable_eee_mode: disable/exit from EEE
+ * stmmac_disable_eee_mode - disable and exit from LPI mode
* @priv: driver private structure
* Description: this function is to exit and disable EEE in case of
* LPI state is true. This is called by the xmit.
@@ -244,7 +245,7 @@ void stmmac_disable_eee_mode(struct stmmac_priv *priv)
}
/**
- * stmmac_eee_ctrl_timer: EEE TX SW timer.
+ * stmmac_eee_ctrl_timer - EEE TX SW timer.
* @arg : data hook
* Description:
* if there is no data transfer and if we are not in LPI state,
@@ -259,13 +260,12 @@ static void stmmac_eee_ctrl_timer(unsigned long arg)
}
/**
- * stmmac_eee_init: init EEE
+ * stmmac_eee_init - init EEE
* @priv: driver private structure
* Description:
- * If the EEE support has been enabled while configuring the driver,
- * if the GMAC actually supports the EEE (from the HW cap reg) and the
- * phy can also manage EEE, so enable the LPI state and start the timer
- * to verify if the tx path can enter in LPI state.
+ * if the GMAC supports the EEE (from the HW cap reg) and the phy device
+ * can also manage EEE, this function enable the LPI state and start related
+ * timer.
*/
bool stmmac_eee_init(struct stmmac_priv *priv)
{
@@ -332,7 +332,7 @@ out:
return ret;
}
-/* stmmac_get_tx_hwtstamp: get HW TX timestamps
+/* stmmac_get_tx_hwtstamp - get HW TX timestamps
* @priv: driver private structure
* @entry : descriptor index to be used.
* @skb : the socket buffer
@@ -374,7 +374,7 @@ static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv,
return;
}
-/* stmmac_get_rx_hwtstamp: get HW RX timestamps
+/* stmmac_get_rx_hwtstamp - get HW RX timestamps
* @priv: driver private structure
* @entry : descriptor index to be used.
* @skb : the socket buffer
@@ -630,11 +630,11 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
}
/**
- * stmmac_init_ptp: init PTP
+ * stmmac_init_ptp - init PTP
* @priv: driver private structure
- * Description: this is to verify if the HW supports the PTPv1 or v2.
+ * Description: this is to verify if the HW supports the PTPv1 or PTPv2.
* This is done by looking at the HW cap. register.
- * Also it registers the ptp driver.
+ * This function also registers the ptp driver.
*/
static int stmmac_init_ptp(struct stmmac_priv *priv)
{
@@ -676,9 +676,13 @@ static void stmmac_release_ptp(struct stmmac_priv *priv)
}
/**
- * stmmac_adjust_link
+ * stmmac_adjust_link - adjusts the link parameters
* @dev: net device structure
- * Description: it adjusts the link parameters.
+ * Description: this is the helper called by the physical abstraction layer
+ * drivers to communicate the phy link status. According the speed and duplex
+ * this driver can invoke registered glue-logic as well.
+ * It also invoke the eee initialization because it could happen when switch
+ * on different networks (that are eee capable).
*/
static void stmmac_adjust_link(struct net_device *dev)
{
@@ -768,7 +772,7 @@ static void stmmac_adjust_link(struct net_device *dev)
}
/**
- * stmmac_check_pcs_mode: verify if RGMII/SGMII is supported
+ * stmmac_check_pcs_mode - verify if RGMII/SGMII is supported
* @priv: driver private structure
* Description: this is to verify if the HW supports the PCS.
* Physical Coding Sublayer (PCS) interface that can be used when the MAC is
@@ -857,7 +861,7 @@ static int stmmac_init_phy(struct net_device *dev)
}
/**
- * stmmac_display_ring: display ring
+ * stmmac_display_ring - display ring
* @head: pointer to the head of the ring passed.
* @size: size of the ring.
* @extend_desc: to verify if extended descriptors are used.
@@ -925,7 +929,7 @@ static int stmmac_set_bfsize(int mtu, int bufsize)
}
/**
- * stmmac_clear_descriptors: clear descriptors
+ * stmmac_clear_descriptors - clear descriptors
* @priv: driver private structure
* Description: this function is called to clear the tx and rx descriptors
* in case of both basic and extended descriptors are used.
@@ -957,6 +961,15 @@ static void stmmac_clear_descriptors(struct stmmac_priv *priv)
(i == txsize - 1));
}
+/**
+ * stmmac_init_rx_buffers - init the RX descriptor buffer.
+ * @priv: driver private structure
+ * @p: descriptor pointer
+ * @i: descriptor index
+ * @flags: gfp flag.
+ * Description: this function is called to allocate a receive buffer, perform
+ * the DMA mapping and init the descriptor.
+ */
static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
int i, gfp_t flags)
{
@@ -1001,7 +1014,8 @@ static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i)
/**
* init_dma_desc_rings - init the RX/TX descriptor rings
* @dev: net device structure
- * Description: this function initializes the DMA RX/TX descriptors
+ * @flags: gfp flag.
+ * Description: this function initializes the DMA RX/TX descriptors
* and allocates the socket buffers. It suppors the chained and ring
* modes.
*/
@@ -1138,6 +1152,14 @@ static void dma_free_tx_skbufs(struct stmmac_priv *priv)
}
}
+/**
+ * alloc_dma_desc_resources - alloc TX/RX resources.
+ * @priv: private structure
+ * Description: according to which descriptor can be used (extend or basic)
+ * this function allocates the resources for TX and RX paths. In case of
+ * reception, for example, it pre-allocated the RX socket buffer in order to
+ * allow zero-copy mechanism.
+ */
static int alloc_dma_desc_resources(struct stmmac_priv *priv)
{
unsigned int txsize = priv->dma_tx_size;
@@ -1249,8 +1271,8 @@ static void free_dma_desc_resources(struct stmmac_priv *priv)
/**
* stmmac_dma_operation_mode - HW DMA operation mode
* @priv: driver private structure
- * Description: it sets the DMA operation mode: tx/rx DMA thresholds
- * or Store-And-Forward capability.
+ * Description: it is used for configuring the DMA operation mode register in
+ * order to program the tx/rx DMA thresholds or Store-And-Forward mode.
*/
static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
{
@@ -1271,9 +1293,9 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
}
/**
- * stmmac_tx_clean:
+ * stmmac_tx_clean - to manage the transmission completion
* @priv: driver private structure
- * Description: it reclaims resources after transmission completes.
+ * Description: it reclaims the transmit resources after transmission completes.
*/
static void stmmac_tx_clean(struct stmmac_priv *priv)
{
@@ -1372,10 +1394,10 @@ static inline void stmmac_disable_dma_irq(struct stmmac_priv *priv)
}
/**
- * stmmac_tx_err: irq tx error mng function
+ * stmmac_tx_err - to manage the tx error
* @priv: driver private structure
* Description: it cleans the descriptors and restarts the transmission
- * in case of errors.
+ * in case of transmission errors.
*/
static void stmmac_tx_err(struct stmmac_priv *priv)
{
@@ -1403,12 +1425,11 @@ static void stmmac_tx_err(struct stmmac_priv *priv)
}
/**
- * stmmac_dma_interrupt: DMA ISR
+ * stmmac_dma_interrupt - DMA ISR
* @priv: driver private structure
* Description: this is the DMA ISR. It is called by the main ISR.
- * It calls the dwmac dma routine to understand which type of interrupt
- * happened. In case of there is a Normal interrupt and either TX or RX
- * interrupt happened so the NAPI is scheduled.
+ * It calls the dwmac dma routine and schedule poll method in case of some
+ * work can be done.
*/
static void stmmac_dma_interrupt(struct stmmac_priv *priv)
{
@@ -1451,6 +1472,12 @@ static void stmmac_mmc_setup(struct stmmac_priv *priv)
pr_info(" No MAC Management Counters available\n");
}
+/**
+ * stmmac_get_synopsys_id - return the SYINID.
+ * @priv: driver private structure
+ * Description: this simple function is to decode and return the SYINID
+ * starting from the HW core register.
+ */
static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv)
{
u32 hwid = priv->hw->synopsys_uid;
@@ -1469,11 +1496,11 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv)
}
/**
- * stmmac_selec_desc_mode: to select among: normal/alternate/extend descriptors
+ * stmmac_selec_desc_mode - to select among: normal/alternate/extend descriptors
* @priv: driver private structure
* Description: select the Enhanced/Alternate or Normal descriptors.
- * In case of Enhanced/Alternate, it looks at the extended descriptors are
- * supported by the HW cap. register.
+ * In case of Enhanced/Alternate, it checks if the extended descriptors are
+ * supported by the HW capability register.
*/
static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
{
@@ -1495,7 +1522,7 @@ static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
}
/**
- * stmmac_get_hw_features: get MAC capabilities from the HW cap. register.
+ * stmmac_get_hw_features - get MAC capabilities from the HW cap. register.
* @priv: driver private structure
* Description:
* new GMAC chip generations have a new register to indicate the
@@ -1553,7 +1580,7 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv)
}
/**
- * stmmac_check_ether_addr: check if the MAC addr is valid
+ * stmmac_check_ether_addr - check if the MAC addr is valid
* @priv: driver private structure
* Description:
* it is to verify if the MAC address is valid, in case of failures it
@@ -1572,7 +1599,7 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv)
}
/**
- * stmmac_init_dma_engine: DMA init.
+ * stmmac_init_dma_engine - DMA init.
* @priv: driver private structure
* Description:
* It inits the DMA invoking the specific MAC/GMAC callback.
@@ -1601,7 +1628,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
}
/**
- * stmmac_tx_timer: mitigation sw timer for tx.
+ * stmmac_tx_timer - mitigation sw timer for tx.
* @data: data pointer
* Description:
* This is the timer handler to directly invoke the stmmac_tx_clean.
@@ -1614,7 +1641,7 @@ static void stmmac_tx_timer(unsigned long data)
}
/**
- * stmmac_init_tx_coalesce: init tx mitigation options.
+ * stmmac_init_tx_coalesce - init tx mitigation options.
* @priv: driver private structure
* Description:
* This inits the transmit coalesce parameters: i.e. timer rate,
@@ -1633,10 +1660,13 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv)
}
/**
- * stmmac_hw_setup: setup mac in a usable state.
+ * stmmac_hw_setup - setup mac in a usable state.
* @dev : pointer to the device structure.
* Description:
- * This function sets up the ip in a usable state.
+ * this is the main function to setup the HW in a usable state because the
+ * dma engine is reset, the core registers are configured (e.g. AXI,
+ * Checksum features, timers). The DMA is ready to start receiving and
+ * transmitting.
* Return value:
* 0 on success and an appropriate (-)ve integer as defined in errno.h
* file on failure.
@@ -1874,7 +1904,7 @@ static int stmmac_release(struct net_device *dev)
}
/**
- * stmmac_xmit: Tx entry point of the driver
+ * stmmac_xmit - Tx entry point of the driver
* @skb : the socket buffer
* @dev : device pointer
* Description : this is the tx entry point of the driver.
@@ -2049,7 +2079,7 @@ static void stmmac_rx_vlan(struct net_device *dev, struct sk_buff *skb)
/**
- * stmmac_rx_refill: refill used skb preallocated buffers
+ * stmmac_rx_refill - refill used skb preallocated buffers
* @priv: driver private structure
* Description : this is to reallocate the skb for the reception process
* that is based on zero-copy.
@@ -2100,7 +2130,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
}
/**
- * stmmac_rx_refill: refill used skb preallocated buffers
+ * stmmac_rx - manage the receive process
* @priv: driver private structure
* @limit: napi bugget.
* Description : this the function called by the napi poll method.
@@ -2369,8 +2399,11 @@ static int stmmac_set_features(struct net_device *netdev,
* @irq: interrupt number.
* @dev_id: to pass the net device pointer.
* Description: this is the main driver interrupt service routine.
- * It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI
- * interrupts.
+ * It can call:
+ * o DMA service routine (to manage incoming frame reception and transmission
+ * status)
+ * o Core interrupts to manage: remote wake-up, management counter, LPI
+ * interrupts.
*/
static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
{
@@ -2657,11 +2690,10 @@ static const struct net_device_ops stmmac_netdev_ops = {
/**
* stmmac_hw_init - Init the MAC device
* @priv: driver private structure
- * Description: this function detects which MAC device
- * (GMAC/MAC10-100) has to attached, checks the HW capability
- * (if supported) and sets the driver's features (for example
- * to use the ring or chaine mode or support the normal/enh
- * descriptor structure).
+ * Description: this function is to configure the MAC device according to
+ * some platform parameters or the HW capability register. It prepares the
+ * driver to use either ring or chain modes and to setup either enhanced or
+ * normal descriptors.
*/
static int stmmac_hw_init(struct stmmac_priv *priv)
{
@@ -2917,6 +2949,13 @@ int stmmac_dvr_remove(struct net_device *ndev)
}
EXPORT_SYMBOL_GPL(stmmac_dvr_remove);
+/**
+ * stmmac_suspend - suspend callback
+ * @ndev: net device pointer
+ * Description: this is the function to suspend the device and it is called
+ * by the platform driver to stop the network queue, release the resources,
+ * program the PMT register (for WoL), clean and release driver resources.
+ */
int stmmac_suspend(struct net_device *ndev)
{
struct stmmac_priv *priv = netdev_priv(ndev);
@@ -2960,6 +2999,12 @@ int stmmac_suspend(struct net_device *ndev)
}
EXPORT_SYMBOL_GPL(stmmac_suspend);
+/**
+ * stmmac_resume - resume callback
+ * @ndev: net device pointer
+ * Description: when resume this function is invoked to setup the DMA and CORE
+ * in a usable state.
+ */
int stmmac_resume(struct net_device *ndev)
{
struct stmmac_priv *priv = netdev_priv(ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index e22a960f8bd7..15814b79ff10 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -51,7 +51,11 @@ MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
#ifdef CONFIG_OF
-/* This function validates the number of Multicast filtering bins specified
+/**
+ * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins
+ * @mcast_bins: Multicast filtering bins
+ * Description:
+ * this function validates the number of Multicast filtering bins specified
* by the configuration through the device tree. The Synopsys GMAC supports
* 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC
* number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds
@@ -77,7 +81,11 @@ static int dwmac1000_validate_mcast_bins(int mcast_bins)
return x;
}
-/* This function validates the number of Unicast address entries supported
+/**
+ * dwmac1000_validate_ucast_entries - validate the Unicast address entries
+ * @ucast_entries: number of Unicast address entries
+ * Description:
+ * This function validates the number of Unicast address entries supported
* by a particular Synopsys 10/100/1000 controller. The Synopsys controller
* supports 1, 32, 64, or 128 Unicast filter entries for it's Unicast filter
* logic. This function validates a valid, supported configuration is
@@ -103,6 +111,15 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries)
return x;
}
+/**
+ * stmmac_probe_config_dt - parse device-tree driver parameters
+ * @pdev: platform_device structure
+ * @plat: driver data platform structure
+ * @mac: MAC address to use
+ * Description:
+ * this function is to read the driver parameters from device-tree and
+ * set some private fields that will be used by the main at runtime.
+ */
static int stmmac_probe_config_dt(struct platform_device *pdev,
struct plat_stmmacenet_data *plat,
const char **mac)
@@ -242,11 +259,11 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
#endif /* CONFIG_OF */
/**
- * stmmac_pltfr_probe
+ * stmmac_pltfr_probe - platform driver probe.
* @pdev: platform device pointer
- * Description: platform_device probe function. It allocates
- * the necessary resources and invokes the main to init
- * the net device, register the mdio bus etc.
+ * Description: platform_device probe function. It is to allocate
+ * the necessary platform resources, invoke custom helper (if required) and
+ * invoke the main probe function.
*/
static int stmmac_pltfr_probe(struct platform_device *pdev)
{
@@ -363,6 +380,13 @@ static int stmmac_pltfr_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM_SLEEP
+/**
+ * stmmac_pltfr_suspend
+ * @dev: device pointer
+ * Description: this function is invoked when suspend the driver and it direcly
+ * call the main suspend function and then, if required, on some platform, it
+ * can call an exit helper.
+ */
static int stmmac_pltfr_suspend(struct device *dev)
{
int ret;
@@ -377,6 +401,13 @@ static int stmmac_pltfr_suspend(struct device *dev)
return ret;
}
+/**
+ * stmmac_pltfr_resume
+ * @dev: device pointer
+ * Description: this function is invoked when resume the driver before calling
+ * the main resume function, on some platforms, it can call own init helper
+ * if required.
+ */
static int stmmac_pltfr_resume(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);