diff options
| author | Roger Quadros <rogerq@ti.com> | 2023-08-01 14:44:24 +0530 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2023-08-02 10:38:11 +0100 |
| commit | 128d5874c0822105ae9556d5435fb8562aff2e3b (patch) | |
| tree | edd8779fa4bf37d12d089a56f4e6678c8c9afb07 /drivers/net/ethernet/ti/Kconfig | |
| parent | 172e604a8c62d01779cf6b22cdaa2cc5e17c879a (diff) | |
net: ti: icssg-prueth: Add ICSSG ethernet driver
This is the Ethernet driver for TI AM654 Silicon rev. 2
with the ICSSG PRU Sub-system running dual-EMAC firmware.
The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
SoCs. This subsystem is provided for the use cases like implementation of
custom peripheral interfaces, offloading of tasks from the other
processor cores of the SoC, etc.
Every ICSSG core has two Programmable Real-Time Unit(PRUs),
two auxiliary Real-Time Transfer Unit (RT_PRUs), and
two Transmit Real-Time Transfer Units (TX_PRUs). Each one of these runs
its own firmware. Every ICSSG core has two MII ports connect to these
PRUs and also a MDIO port.
The cores can run different firmwares to support different protocols and
features like switch-dev, timestamping, etc.
It uses System DMA to transfer and receive packets and
shared memory register emulation between the firmware and
driver for control and configuration.
This patch adds support for basic EMAC functionality with 1Gbps
and 100Mbps link speed. 10M and half duplex mode are not supported
currently as they require IEP, the support for which will be added later.
Support for switch-dev, timestamp, etc. will be added later
by subsequent patch series.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/ti/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/ti/Kconfig | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index fce06663e1e1..63e510b6860f 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -183,4 +183,17 @@ config CPMAC help TI AR7 CPMAC Ethernet support +config TI_ICSSG_PRUETH + tristate "TI Gigabit PRU Ethernet driver" + select PHYLIB + depends on PRU_REMOTEPROC + depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER + help + Support dual Gigabit Ethernet ports over the ICSSG PRU Subsystem. + This subsystem is available starting with the AM65 platform. + + This driver requires firmware binaries which will run on the PRUs + to support the Ethernet operation. Currently, it supports Ethernet + with 1G and 100M link speed. + endif # NET_VENDOR_TI |