soc: qcom: ipa: immediate commands

One TX endpoint (per EE) is used for issuing immediate commands to
the IPA.  These commands request activites beyond simple data
transfers to be done by the IPA hardware.  For example, the IPA is
able to manage routing packets among endpoints, and immediate commands
are used to configure tables used for that routing.

Immediate commands are built on top of GSI transactions.  They are
different from normal transfers (in that they use a special endpoint,
and their "payload" is interpreted differently), so separate functions
are used to issue immediate command transactions.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 195 insertions, 0 deletions

diff --git a/drivers/net/ipa/ipa_cmd.h b/drivers/net/ipa/ipa_cmd.h
new file mode 100644
index 000000000000..4917525b3a47
--- /dev/null
+++ b/drivers/net/ipa/ipa_cmd.h
@@ -0,0 +1,195 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2019-2020 Linaro Ltd.
+ */
+#ifndef _IPA_CMD_H_
+#define _IPA_CMD_H_
+
+#include <linux/types.h>
+#include <linux/dma-direction.h>
+
+struct sk_buff;
+struct scatterlist;
+
+struct ipa;
+struct ipa_mem;
+struct gsi_trans;
+struct gsi_channel;
+
+/**
+ * enum ipa_cmd_opcode:	IPA immediate commands
+ *
+ * All immediate commands are issued using the AP command TX endpoint.
+ * The numeric values here are the opcodes for IPA v3.5.1 hardware.
+ *
+ * IPA_CMD_NONE is a special (invalid) value that's used to indicate
+ * a request is *not* an immediate command.
+ */
+enum ipa_cmd_opcode {
+	IPA_CMD_NONE			= 0,
+	IPA_CMD_IP_V4_FILTER_INIT	= 3,
+	IPA_CMD_IP_V6_FILTER_INIT	= 4,
+	IPA_CMD_IP_V4_ROUTING_INIT	= 7,
+	IPA_CMD_IP_V6_ROUTING_INIT	= 8,
+	IPA_CMD_HDR_INIT_LOCAL		= 9,
+	IPA_CMD_REGISTER_WRITE		= 12,
+	IPA_CMD_IP_PACKET_INIT		= 16,
+	IPA_CMD_DMA_TASK_32B_ADDR	= 17,
+	IPA_CMD_DMA_SHARED_MEM		= 19,
+	IPA_CMD_IP_PACKET_TAG_STATUS	= 20,
+};
+
+/**
+ * struct ipa_cmd_info - information needed for an IPA immediate command
+ *
+ * @opcode:	The command opcode.
+ * @direction:	Direction of data transfer for DMA commands
+ */
+struct ipa_cmd_info {
+	enum ipa_cmd_opcode opcode;
+	enum dma_data_direction direction;
+};
+
+
+#ifdef IPA_VALIDATE
+
+/**
+ * ipa_cmd_table_valid() - Validate a memory region holding a table
+ * @ipa:	- IPA pointer
+ * @mem:	- IPA memory region descriptor
+ * @route:	- Whether the region holds a route or filter table
+ * @ipv6:	- Whether the table is for IPv6 or IPv4
+ * @hashed:	- Whether the table is hashed or non-hashed
+ *
+ * @Return:	true if region is valid, false otherwise
+ */
+bool ipa_cmd_table_valid(struct ipa *ipa, const struct ipa_mem *mem,
+			    bool route, bool ipv6, bool hashed);
+
+/**
+ * ipa_cmd_data_valid() - Validate command-realted configuration is valid
+ * @ipa:	- IPA pointer
+ *
+ * @Return:	true if assumptions required for command are valid
+ */
+bool ipa_cmd_data_valid(struct ipa *ipa);
+
+#else /* !IPA_VALIDATE */
+
+static inline bool ipa_cmd_table_valid(struct ipa *ipa,
+				       const struct ipa_mem *mem, bool route,
+				       bool ipv6, bool hashed)
+{
+	return true;
+}
+
+static inline bool ipa_cmd_data_valid(struct ipa *ipa)
+{
+	return true;
+}
+
+#endif /* !IPA_VALIDATE */
+
+/**
+ * ipa_cmd_pool_init() - initialize command channel pools
+ * @channel:	AP->IPA command TX GSI channel pointer
+ * @tre_count:	Number of pool elements to allocate
+ *
+ * @Return:	0 if successful, or a negative error code
+ */
+int ipa_cmd_pool_init(struct gsi_channel *gsi_channel, u32 tre_count);
+
+/**
+ * ipa_cmd_pool_exit() - Inverse of ipa_cmd_pool_init()
+ * @channel:	AP->IPA command TX GSI channel pointer
+ */
+void ipa_cmd_pool_exit(struct gsi_channel *channel);
+
+/**
+ * ipa_cmd_table_init_add() - Add table init command to a transaction
+ * @trans:	GSI transaction
+ * @opcode:	IPA immediate command opcode
+ * @size:	Size of non-hashed routing table memory
+ * @offset:	Offset in IPA shared memory of non-hashed routing table memory
+ * @addr:	DMA address of non-hashed table data to write
+ * @hash_size:	Size of hashed routing table memory
+ * @hash_offset: Offset in IPA shared memory of hashed routing table memory
+ * @hash_addr:	DMA address of hashed table data to write
+ *
+ * If hash_size is 0, hash_offset and hash_addr are ignored.
+ */
+void ipa_cmd_table_init_add(struct gsi_trans *trans, enum ipa_cmd_opcode opcode,
+			    u16 size, u32 offset, dma_addr_t addr,
+			    u16 hash_size, u32 hash_offset,
+			    dma_addr_t hash_addr);
+
+/**
+ * ipa_cmd_hdr_init_local_add() - Add a header init command to a transaction
+ * @ipa:	IPA structure
+ * @offset:	Offset of header memory in IPA local space
+ * @size:	Size of header memory
+ * @addr:	DMA address of buffer to be written from
+ *
+ * Defines and fills the location in IPA memory to use for headers.
+ */
+void ipa_cmd_hdr_init_local_add(struct gsi_trans *trans, u32 offset, u16 size,
+				dma_addr_t addr);
+
+/**
+ * ipa_cmd_register_write_add() - Add a register write command to a transaction
+ * @trans:	GSI transaction
+ * @offset:	Offset of register to be written
+ * @value:	Value to be written
+ * @mask:	Mask of bits in register to update with bits from value
+ * @clear_full: Pipeline clear option; true means full pipeline clear
+ */
+void ipa_cmd_register_write_add(struct gsi_trans *trans, u32 offset, u32 value,
+				u32 mask, bool clear_full);
+
+/**
+ * ipa_cmd_dma_task_32b_addr_add() - Add a 32-bit DMA command to a transaction
+ * @trans:	GSi transaction
+ * @size:	Number of bytes to be memory to be transferred
+ * @addr:	DMA address of buffer to be read into or written from
+ * @toward_ipa:	true means write to IPA memory; false means read
+ */
+void ipa_cmd_dma_task_32b_addr_add(struct gsi_trans *trans, u16 size,
+				   dma_addr_t addr, bool toward_ipa);
+
+/**
+ * ipa_cmd_dma_shared_mem_add() - Add a DMA memory command to a transaction
+ * @trans:	GSI transaction
+ * @offset:	Offset of IPA memory to be read or written
+ * @size:	Number of bytes of memory to be transferred
+ * @addr:	DMA address of buffer to be read into or written from
+ * @toward_ipa:	true means write to IPA memory; false means read
+ */
+void ipa_cmd_dma_shared_mem_add(struct gsi_trans *trans, u32 offset,
+				u16 size, dma_addr_t addr, bool toward_ipa);
+
+/**
+ * ipa_cmd_tag_process_add() - Add IPA tag process commands to a transaction
+ * @trans:	GSI transaction
+ */
+void ipa_cmd_tag_process_add(struct gsi_trans *trans);
+
+/**
+ * ipa_cmd_tag_process_add_count() - Number of commands in a tag process
+ *
+ * @Return:	The number of elements to allocate in a transaction
+ *		to hold tag process commands
+ */
+u32 ipa_cmd_tag_process_count(void);
+
+/**
+ * ipa_cmd_trans_alloc() - Allocate a transaction for the command TX endpoint
+ * @ipa:	IPA pointer
+ * @tre_count:	Number of elements in the transaction
+ *
+ * @Return:	A GSI transaction structure, or a null pointer if all
+ *		available transactions are in use
+ */
+struct gsi_trans *ipa_cmd_trans_alloc(struct ipa *ipa, u32 tre_count);
+
+#endif /* _IPA_CMD_H_ */