summaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
authorGrygorii Strashko <grygorii.strashko@ti.com>2019-10-23 17:48:45 +0300
committerDavid S. Miller <davem@davemloft.net>2019-10-25 19:24:47 -0700
commit5a7f08c2abb0efc9d17aff2fc75d6d3b85e622e4 (patch)
treea81f092fe973235e2afc6e959ca0f77a182927e6 /drivers/net/phy
parent546b85bb0aadb5a928b49b53dc02911996169c0b (diff)
net: phy: dp83867: enable robust auto-mdix
The link detection timeouts can be observed (or link might not be detected at all) when dp83867 PHY is configured in manual mode (speed/duplex). CFG3[9] Robust Auto-MDIX option allows to significantly improve link detection in case dp83867 is configured in manual mode and reduce link detection time. As per DM: "If link partners are configured to operational modes that are not supported by normal Auto MDI/MDIX mode (like Auto-Neg versus Force 100Base-TX or Force 100Base-TX versus Force 100Base-TX), this Robust Auto MDI/MDIX mode allows MDI/MDIX resolution and prevents deadlock." Hence, enable this option by default as there are no known reasons not to do so. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/dp83867.c15
1 files changed, 10 insertions, 5 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 37fceaf9fa10..cf4455bbf888 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -95,6 +95,10 @@
#define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK (0x1f << 8)
#define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8
+/* CFG3 bits */
+#define DP83867_CFG3_INT_OE BIT(7)
+#define DP83867_CFG3_ROBUST_AUTO_MDIX BIT(9)
+
/* CFG4 bits */
#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)
@@ -410,12 +414,13 @@ static int dp83867_config_init(struct phy_device *phydev)
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL, val);
}
+ val = phy_read(phydev, DP83867_CFG3);
/* Enable Interrupt output INT_OE in CFG3 register */
- if (phy_interrupt_is_valid(phydev)) {
- val = phy_read(phydev, DP83867_CFG3);
- val |= BIT(7);
- phy_write(phydev, DP83867_CFG3, val);
- }
+ if (phy_interrupt_is_valid(phydev))
+ val |= DP83867_CFG3_INT_OE;
+
+ val |= DP83867_CFG3_ROBUST_AUTO_MDIX;
+ phy_write(phydev, DP83867_CFG3, val);
if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP)
dp83867_config_port_mirroring(phydev);