diff options
| author | Gerhard Engleder <gerhard@engleder-embedded.com> | 2025-03-12 21:30:08 +0100 |
|---|---|---|
| committer | Paolo Abeni <pabeni@redhat.com> | 2025-03-20 08:45:08 +0100 |
| commit | fe4bf60ffdff689d825a0f613636946124c9b5fe (patch) | |
| tree | 9213426260c32d4b7d2de787638bcb43399bec63 /drivers/net/phy | |
| parent | 0d60fd50328a96a901b09ed653704ce7f41d15ce (diff) | |
net: phy: micrel: Add loopback support
The KSZ9031 PHYs requires full duplex for loopback mode. Add PHY
specific set_loopback() to ensure this.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250312203010.47429-4-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/micrel.c | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 289e1d56aa65..24882d30f685 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -1032,6 +1032,29 @@ static int ksz9021_config_init(struct phy_device *phydev) #define MII_KSZ9031RN_EDPD 0x23 #define MII_KSZ9031RN_EDPD_ENABLE BIT(0) +static int ksz9031_set_loopback(struct phy_device *phydev, bool enable, + int speed) +{ + u16 ctl = BMCR_LOOPBACK; + int val; + + if (!enable) + return genphy_loopback(phydev, enable, 0); + + if (speed == SPEED_10 || speed == SPEED_100 || speed == SPEED_1000) + phydev->speed = speed; + else if (speed) + return -EINVAL; + phydev->duplex = DUPLEX_FULL; + + ctl |= mii_bmcr_encode_fixed(phydev->speed, phydev->duplex); + + phy_write(phydev, MII_BMCR, ctl); + + return phy_read_poll_timeout(phydev, MII_BMSR, val, val & BMSR_LSTATUS, + 5000, 500000, true); +} + static int ksz9031_of_load_skew_values(struct phy_device *phydev, const struct device_node *of_node, u16 reg, size_t field_sz, @@ -5565,6 +5588,7 @@ static struct phy_driver ksphy_driver[] = { .resume = kszphy_resume, .cable_test_start = ksz9x31_cable_test_start, .cable_test_get_status = ksz9x31_cable_test_get_status, + .set_loopback = ksz9031_set_loopback, }, { .phy_id = PHY_ID_LAN8814, .phy_id_mask = MICREL_PHY_ID_MASK, |