Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

1 files changed, 113 insertions, 3 deletions

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 4972dc12991c..e77b97ca5c7f 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -198,6 +198,12 @@ enum wmi_tlv_cmd_id {
 	WMI_TLV_REQUEST_LINK_STATS_CMDID,
 	WMI_TLV_START_LINK_STATS_CMDID,
 	WMI_TLV_CLEAR_LINK_STATS_CMDID,
+	WMI_TLV_CGET_FW_MEM_DUMP_CMDID,
+	WMI_TLV_CDEBUG_MESG_FLUSH_CMDID,
+	WMI_TLV_CDIAG_EVENT_LOG_CONFIG_CMDID,
+	WMI_TLV_CREQUEST_WLAN_STATS_CMDID,
+	WMI_TLV_CREQUEST_RCPI_CMDID,
+	WMI_TLV_REQUEST_PEER_STATS_INFO_CMDID,
 	WMI_TLV_SET_ARP_NS_OFFLOAD_CMDID = WMI_TLV_CMD(WMI_TLV_GRP_ARP_NS_OFL),
 	WMI_TLV_ADD_PROACTIVE_ARP_RSP_PATTERN_CMDID,
 	WMI_TLV_DEL_PROACTIVE_ARP_RSP_PATTERN_CMDID,
@@ -338,6 +344,13 @@ enum wmi_tlv_event_id {
 	WMI_TLV_IFACE_LINK_STATS_EVENTID,
 	WMI_TLV_PEER_LINK_STATS_EVENTID,
 	WMI_TLV_RADIO_LINK_STATS_EVENTID,
+	WMI_TLV_UPDATE_FW_MEM_DUMP_EVENTID,
+	WMI_TLV_DIAG_EVENT_LOG_SUPPORTED_EVENTID,
+	WMI_TLV_INST_RSSI_STATS_EVENTID,
+	WMI_TLV_RADIO_TX_POWER_LEVEL_STATS_EVENTID,
+	WMI_TLV_REPORT_STATS_EVENTID,
+	WMI_TLV_UPDATE_RCPI_EVENTID,
+	WMI_TLV_PEER_STATS_INFO_EVENTID,
 	WMI_TLV_NLO_MATCH_EVENTID = WMI_TLV_EV(WMI_TLV_GRP_NLO_OFL),
 	WMI_TLV_NLO_SCAN_COMPLETE_EVENTID,
 	WMI_TLV_APFIND_EVENTID,
@@ -451,6 +464,7 @@ enum wmi_tlv_pdev_param {
 	WMI_TLV_PDEV_PARAM_VDEV_RATE_STATS_UPDATE_PERIOD,
 	WMI_TLV_PDEV_PARAM_TXPOWER_REASON_NONE,
 	WMI_TLV_PDEV_PARAM_TXPOWER_REASON_SAR,
+	WMI_TLV_PDEV_PARAM_PEER_STATS_INFO_ENABLE = 0x8b,
 	WMI_TLV_PDEV_PARAM_TXPOWER_REASON_MAX,
 };
 
@@ -1623,7 +1637,7 @@ wmi_tlv_svc_map_ext(const __le32 *in, unsigned long *out, size_t len)
 struct wmi_tlv {
 	__le16 len;
 	__le16 tag;
-	u8 value[0];
+	u8 value[];
 } __packed;
 
 struct ath10k_mgmt_tx_pkt_addr {
@@ -2023,7 +2037,7 @@ struct wmi_tlv_bcn_tx_status_ev {
 struct wmi_tlv_bcn_prb_info {
 	__le32 caps;
 	__le32 erp;
-	u8 ies[0];
+	u8 ies[];
 } __packed;
 
 struct wmi_tlv_bcn_tmpl_cmd {
@@ -2054,7 +2068,7 @@ struct wmi_tlv_diag_item {
 	__le16 len;
 	__le32 timestamp;
 	__le32 code;
-	u8 payload[0];
+	u8 payload[];
 } __packed;
 
 struct wmi_tlv_diag_data_ev {
@@ -2081,6 +2095,94 @@ struct wmi_tlv_stats_ev {
 	__le32 num_peer_stats_extd;
 } __packed;
 
+struct wmi_tlv_peer_stats_info_ev {
+	__le32 vdev_id;
+	__le32 num_peers;
+	__le32 more_data;
+} __packed;
+
+#define WMI_TLV_MAX_CHAINS 8
+
+struct wmi_tlv_peer_stats_info {
+	struct wmi_mac_addr peer_macaddr;
+	struct {
+		/* lower 32 bits of the tx_bytes value */
+		__le32 low_32;
+		/* upper 32 bits of the tx_bytes value */
+		__le32 high_32;
+	} __packed tx_bytes;
+	struct {
+		/* lower 32 bits of the tx_packets value */
+		__le32 low_32;
+		/* upper 32 bits of the tx_packets value */
+		__le32 high_32;
+	} __packed tx_packets;
+	struct {
+		/* lower 32 bits of the rx_bytes value */
+		__le32 low_32;
+		/* upper 32 bits of the rx_bytes value */
+		__le32 high_32;
+	} __packed rx_bytes;
+	struct {
+		/* lower 32 bits of the rx_packets value */
+		__le32 low_32;
+		/* upper 32 bits of the rx_packets value */
+		__le32 high_32;
+	} __packed rx_packets;
+	__le32 tx_retries;
+	__le32 tx_failed;
+
+	/* rate information, it is output of WMI_ASSEMBLE_RATECODE_V1
+	 *  (in format of 0x1000RRRR)
+	 * The rate-code is a 4-bytes field in which,
+	 * for given rate, nss and preamble
+	 *
+	 * b'31-b'29 unused / reserved
+	 * b'28      indicate the version of rate-code (1 = RATECODE_V1)
+	 * b'27-b'11 unused / reserved
+	 * b'10-b'8  indicate the preamble (0 OFDM, 1 CCK, 2 HT, 3 VHT)
+	 * b'7-b'5   indicate the NSS (0 - 1x1, 1 - 2x2, 2 - 3x3, 3 - 4x4)
+	 * b'4-b'0   indicate the rate, which is indicated as follows:
+	 *	    OFDM :     0: OFDM 48 Mbps
+	 *		       1: OFDM 24 Mbps
+	 *		       2: OFDM 12 Mbps
+	 *		       3: OFDM 6 Mbps
+	 *		       4: OFDM 54 Mbps
+	 *		       5: OFDM 36 Mbps
+	 *		       6: OFDM 18 Mbps
+	 *		       7: OFDM 9 Mbps
+	 *	   CCK (pream == 1)
+	 *		       0: CCK 11 Mbps Long
+	 *		       1: CCK 5.5 Mbps Long
+	 *		       2: CCK 2 Mbps Long
+	 *		       3: CCK 1 Mbps Long
+	 *		       4: CCK 11 Mbps Short
+	 *		       5: CCK 5.5 Mbps Short
+	 *		       6: CCK 2 Mbps Short
+	 *	   HT/VHT (pream == 2/3)
+	 *		       0..7: MCS0..MCS7 (HT)
+	 *		       0..9: MCS0..MCS9 (11AC VHT)
+	 *		       0..11: MCS0..MCS11 (11AX VHT)
+	 * rate-code of the last transmission
+	 */
+	__le32 last_tx_rate_code;
+	__le32 last_rx_rate_code;
+	__le32 last_tx_bitrate_kbps;
+	__le32 last_rx_bitrate_kbps;
+	__le32 peer_rssi;
+	__le32 tx_succeed;
+	__le32 peer_rssi_per_chain[WMI_TLV_MAX_CHAINS];
+} __packed;
+
+#define HW_RATECODE_PREAM_V1_MASK GENMASK(10, 8)
+#define WMI_TLV_GET_HW_RC_PREAM_V1(rc) FIELD_GET(HW_RATECODE_PREAM_V1_MASK, rc)
+
+#define HW_RATECODE_NSS_V1_MASK GENMASK(7, 5)
+#define WMI_TLV_GET_HW_RC_NSS_V1(rc) FIELD_GET(HW_RATECODE_NSS_V1_MASK, rc)
+
+#define HW_RATECODE_RATE_V1_MASK GENMASK(4, 0)
+#define WMI_TLV_GET_HW_RC_RATE_V1(rc) FIELD_GET(HW_RATECODE_RATE_V1_MASK, rc)
+
 struct wmi_tlv_p2p_noa_ev {
 	__le32 vdev_id;
 } __packed;
@@ -2097,6 +2199,14 @@ struct wmi_tlv_wow_add_del_event_cmd {
 	__le32 event_bitmap;
 } __packed;
 
+struct wmi_tlv_request_peer_stats_info {
+	__le32 request_type;
+	__le32 vdev_id;
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
+	__le32 reset_after_request;
+} __packed;
+
 /* Command to set/unset chip in quiet mode */
 struct wmi_tlv_set_quiet_cmd {
 	__le32 vdev_id;