iwlwifi: mvm: add support for location range request version 8

The new API requires the driver to set the frame format
(legacy, HT, VHT etc.) to be used for the measurement.

The new API also supports 11az and secured measurement, but
these are not supported by the driver for now.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

1 files changed, 101 insertions, 3 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/location.h b/drivers/net/wireless/intel/iwlwifi/fw/api/location.h
index 7a0fe5adefa5..a51fda4c9588 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/location.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/location.h
@@ -403,7 +403,7 @@ enum iwl_initiator_ap_flags {
 };
 
 /**
- * struct iwl_tof_range_req_ap_entry - AP configuration parameters
+ * struct iwl_tof_range_req_ap_entry_v3 - AP configuration parameters
  * @initiator_ap_flags: see &enum iwl_initiator_ap_flags.
  * @channel_num: AP Channel number
  * @bandwidth: AP bandwidth. One of iwl_tof_bandwidth.
@@ -420,7 +420,7 @@ enum iwl_initiator_ap_flags {
  * @reserved: For alignment and future use
  * @tsf_delta: not in use
  */
-struct iwl_tof_range_req_ap_entry {
+struct iwl_tof_range_req_ap_entry_v3 {
 	__le32 initiator_ap_flags;
 	u8 channel_num;
 	u8 bandwidth;
@@ -435,6 +435,72 @@ struct iwl_tof_range_req_ap_entry {
 } __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_3 */
 
 /**
+ * enum iwl_location_frame_format - location frame formats
+ * @IWL_LOCATION_FRAME_FORMAT_LEGACY: legacy
+ * @IWL_LOCATION_FRAME_FORMAT_HT: HT
+ * @IWL_LOCATION_FRAME_FORMAT_VHT: VHT
+ * @IWL_LOCATION_FRAME_FORMAT_HE: HE
+ */
+enum iwl_location_frame_format {
+	IWL_LOCATION_FRAME_FORMAT_LEGACY,
+	IWL_LOCATION_FRAME_FORMAT_HT,
+	IWL_LOCATION_FRAME_FORMAT_VHT,
+	IWL_LOCATION_FRAME_FORMAT_HE,
+};
+
+/**
+ * enum iwl_location_bw - location bandwidth selection
+ * @IWL_LOCATION_BW_20MHZ: 20MHz
+ * @IWL_LOCATION_BW_40MHZ: 40MHz
+ * @IWL_LOCATION_BW_80MHZ: 80MHz
+ */
+enum iwl_location_bw {
+	IWL_LOCATION_BW_20MHZ,
+	IWL_LOCATION_BW_40MHZ,
+	IWL_LOCATION_BW_80MHZ,
+};
+
+#define HLTK_11AZ_LEN	32
+#define TK_11AZ_LEN	32
+
+#define LOCATION_BW_POS	4
+
+/**
+ * struct iwl_tof_range_req_ap_entry - AP configuration parameters
+ * @initiator_ap_flags: see &enum iwl_initiator_ap_flags.
+ * @channel_num: AP Channel number
+ * @format_bw: bits 0 - 3: &enum iwl_location_frame_format.
+ *             bits 4 - 7: &enum iwl_location_bw.
+ * @ctrl_ch_position: Coding of the control channel position relative to the
+ *	center frequency, see iwl_mvm_get_ctrl_pos().
+ * @ftmr_max_retries: Max number of retries to send the FTMR in case of no
+ *	reply from the AP.
+ * @bssid: AP's BSSID
+ * @burst_period: Recommended value to be sent to the AP. Measurement
+ *	periodicity In units of 100ms. ignored if num_of_bursts_exp = 0
+ * @samples_per_burst: the number of FTMs pairs in single Burst (1-31);
+ * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of
+ *	the number of measurement iterations (min 2^0 = 1, max 2^14)
+ * @reserved: For alignment and future use
+ * @hltk: HLTK to be used for secured 11az measurement
+ * @tk: TK to be used for secured 11az measurement
+ */
+struct iwl_tof_range_req_ap_entry {
+	__le32 initiator_ap_flags;
+	u8 channel_num;
+	u8 format_bw;
+	u8 ctrl_ch_position;
+	u8 ftmr_max_retries;
+	u8 bssid[ETH_ALEN];
+	__le16 burst_period;
+	u8 samples_per_burst;
+	u8 num_of_bursts;
+	__le16 reserved;
+	u8 hltk[HLTK_11AZ_LEN];
+	u8 tk[TK_11AZ_LEN];
+} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_4 */
+
+/**
  * enum iwl_tof_response_mode
  * @IWL_MVM_TOF_RESPONSE_ASAP: report each AP measurement separately as soon as
  *			       possible (not supported for this release)
@@ -536,6 +602,38 @@ struct iwl_tof_range_req_cmd_v5 {
 /* LOCATION_RANGE_REQ_CMD_API_S_VER_5 */
 
 /**
+ * struct iwl_tof_range_req_cmd_v7 - start measurement cmd
+ * @initiator_flags: see flags @ iwl_tof_initiator_flags
+ * @request_id: A Token incremented per request. The same Token will be
+ *		sent back in the range response
+ * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS)
+ * @range_req_bssid: ranging request BSSID
+ * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template.
+ *		  Bits set to 1 shall be randomized by the UMAC
+ * @macaddr_template: MAC address template to use for non-randomized bits
+ * @req_timeout_ms: Requested timeout of the response in units of milliseconds.
+ *	This is the session time for completing the measurement.
+ * @tsf_mac_id: report the measurement start time for each ap in terms of the
+ *	TSF of this mac id. 0xff to disable TSF reporting.
+ * @common_calib: The common calib value to inject to this measurement calc
+ * @specific_calib: The specific calib value to inject to this measurement calc
+ * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2.
+ */
+struct iwl_tof_range_req_cmd_v7 {
+	__le32 initiator_flags;
+	u8 request_id;
+	u8 num_of_ap;
+	u8 range_req_bssid[ETH_ALEN];
+	u8 macaddr_mask[ETH_ALEN];
+	u8 macaddr_template[ETH_ALEN];
+	__le32 req_timeout_ms;
+	__le32 tsf_mac_id;
+	__le16 common_calib;
+	__le16 specific_calib;
+	struct iwl_tof_range_req_ap_entry_v3 ap[IWL_MVM_TOF_MAX_APS];
+} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_7 */
+
+/**
  * struct iwl_tof_range_req_cmd - start measurement cmd
  * @initiator_flags: see flags @ iwl_tof_initiator_flags
  * @request_id: A Token incremented per request. The same Token will be
@@ -565,7 +663,7 @@ struct iwl_tof_range_req_cmd {
 	__le16 common_calib;
 	__le16 specific_calib;
 	struct iwl_tof_range_req_ap_entry ap[IWL_MVM_TOF_MAX_APS];
-} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_7 */
+} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_8 */
 
 /*
  * enum iwl_tof_range_request_status - status of the sent request