diff options
| author | Haim Dreyfuss <haim.dreyfuss@intel.com> | 2021-01-17 16:52:26 +0200 |
|---|---|---|
| committer | Luca Coelho <luciano.coelho@intel.com> | 2021-02-05 11:55:15 +0200 |
| commit | 708a39aaca2204dcacc96dec1401373063801213 (patch) | |
| tree | 264a0f061245857c5b7ecd2ca050a98c90f23da4 /drivers/net/wireless/intel/iwlwifi/iwl-trans.c | |
| parent | 00520b7a2a13db5c6b56cc1f49cea4e0e174479c (diff) | |
iwlwifi: mvm: don't send commands during suspend\resume transition
D3_CONFIG_CMD and D0I3_END_CMD should be the last\first
command upon suspend\resume correspondingly, otherwise,
FW will raise an assert (0x342).
There are firmware notifications that cause the driver to
send a command back to the firmware. If such a notification
is sent to the driver while the the driver prepares the
firmware for D3, operation, what is likely to happen is that
the handling of the notification will try to get the mutex
and will wait unil the driver finished configuring the
firmware for D3. Then the handling notification will get
the mutex and handle the notification which will lead to
the aforementioned ASSERT 342.
To avoid this, we need to prevent any command to be sent to
the firmware between the D3_CONFIG_CMD and the D0I3_END_CMD.
Check this in the utility layer that sends the host commands
and in the transport layer as well.
Flag the D3_CONFIG_CMD and the D0I3_END_CMD commands as
commands that must be sent even if the firmware has already
been configured for D3 operation.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210117164916.1935a993b471.I3192c93c030576ca16773c01b009c4d93610d6ea@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-trans.c')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/iwl-trans.c | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.c b/drivers/net/wireless/intel/iwlwifi/iwl-trans.c index cc76826da5d5..b3ed4fa1dac4 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.c @@ -130,6 +130,19 @@ int iwl_trans_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd) test_bit(STATUS_RFKILL_OPMODE, &trans->status))) return -ERFKILL; + /* + * We can't test IWL_MVM_STATUS_IN_D3 in mvm->status because this + * bit is set early in the D3 flow, before we send all the commands + * that configure the firmware for D3 operation (power, patterns, ...) + * and we don't want to flag all those with CMD_SEND_IN_D3. + * So use the system_pm_mode instead. The only command sent after + * we set system_pm_mode is D3_CONFIG_CMD, which we now flag with + * CMD_SEND_IN_D3. + */ + if (unlikely(trans->system_pm_mode == IWL_PLAT_PM_MODE_D3 && + !(cmd->flags & CMD_SEND_IN_D3))) + return -EHOSTDOWN; + if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status))) return -EIO; |