diff options
| author | Johannes Berg <johannes.berg@intel.com> | 2017-06-02 15:15:53 +0200 |
|---|---|---|
| committer | Luca Coelho <luciano.coelho@intel.com> | 2017-08-01 12:41:43 +0300 |
| commit | d172a5eff629127c048272e5d44e8b9f9cd30eac (patch) | |
| tree | b2ab15532722eff8868736d573b148d67f786d63 /drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h | |
| parent | 7174beb60c53209c6e98c9cee20efdee97ef880f (diff) | |
iwlwifi: reorganize firmware API
Apart from DVM, all firmware uses the same base API, and there's
code outside iwlmvm that needs to interact with it. Reflect this
in the source better and reorganize the firmware API to a new
fw/api/ directory.
While at it, split the already pretty large fw-api.h file into a
number of smaller files, going from almost 3k lines in there to
a maximum number of lines less than 1k.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h | 2714 |
1 files changed, 27 insertions, 2687 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h index bfc865ad8904..69336f38ac58 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h @@ -68,2692 +68,32 @@ #ifndef __fw_api_h__ #define __fw_api_h__ -#include "fw-api-rs.h" -#include "fw-api-rx.h" -#include "fw-api-tx.h" -#include "fw-api-sta.h" -#include "fw-api-mac.h" -#include "fw-api-power.h" -#include "fw-api-d3.h" -#include "fw-api-coex.h" -#include "fw-api-scan.h" -#include "fw-api-stats.h" -#include "fw-api-tof.h" - -/* Tx queue numbers for non-DQA mode */ -enum { - IWL_MVM_OFFCHANNEL_QUEUE = 8, - IWL_MVM_CMD_QUEUE = 9, -}; - -/* - * DQA queue numbers - * - * @IWL_MVM_DQA_CMD_QUEUE: a queue reserved for sending HCMDs to the FW - * @IWL_MVM_DQA_AUX_QUEUE: a queue reserved for aux frames - * @IWL_MVM_DQA_P2P_DEVICE_QUEUE: a queue reserved for P2P device frames - * @IWL_MVM_DQA_GCAST_QUEUE: a queue reserved for P2P GO/SoftAP GCAST frames - * @IWL_MVM_DQA_BSS_CLIENT_QUEUE: a queue reserved for BSS activity, to ensure - * that we are never left without the possibility to connect to an AP. - * @IWL_MVM_DQA_MIN_MGMT_QUEUE: first TXQ in pool for MGMT and non-QOS frames. - * Each MGMT queue is mapped to a single STA - * MGMT frames are frames that return true on ieee80211_is_mgmt() - * @IWL_MVM_DQA_MAX_MGMT_QUEUE: last TXQ in pool for MGMT frames - * @IWL_MVM_DQA_AP_PROBE_RESP_QUEUE: a queue reserved for P2P GO/SoftAP probe - * responses - * @IWL_MVM_DQA_MIN_DATA_QUEUE: first TXQ in pool for DATA frames. - * DATA frames are intended for !ieee80211_is_mgmt() frames, but if - * the MGMT TXQ pool is exhausted, mgmt frames can be sent on DATA queues - * as well - * @IWL_MVM_DQA_MAX_DATA_QUEUE: last TXQ in pool for DATA frames - */ -enum iwl_mvm_dqa_txq { - IWL_MVM_DQA_CMD_QUEUE = 0, - IWL_MVM_DQA_AUX_QUEUE = 1, - IWL_MVM_DQA_P2P_DEVICE_QUEUE = 2, - IWL_MVM_DQA_GCAST_QUEUE = 3, - IWL_MVM_DQA_BSS_CLIENT_QUEUE = 4, - IWL_MVM_DQA_MIN_MGMT_QUEUE = 5, - IWL_MVM_DQA_MAX_MGMT_QUEUE = 8, - IWL_MVM_DQA_AP_PROBE_RESP_QUEUE = 9, - IWL_MVM_DQA_MIN_DATA_QUEUE = 10, - IWL_MVM_DQA_MAX_DATA_QUEUE = 31, -}; - -enum iwl_mvm_tx_fifo { - IWL_MVM_TX_FIFO_BK = 0, - IWL_MVM_TX_FIFO_BE, - IWL_MVM_TX_FIFO_VI, - IWL_MVM_TX_FIFO_VO, - IWL_MVM_TX_FIFO_MCAST = 5, - IWL_MVM_TX_FIFO_CMD = 7, -}; - - -/** - * enum iwl_legacy_cmds - legacy group command IDs - */ -enum iwl_legacy_cmds { - /** - * @MVM_ALIVE: - * Alive data from the firmware, as described in - * &struct mvm_alive_resp_v3 or &struct mvm_alive_resp. - */ - MVM_ALIVE = 0x1, - - /** - * @REPLY_ERROR: Cause an error in the firmware, for testing purposes. - */ - REPLY_ERROR = 0x2, - - /** - * @ECHO_CMD: Send data to the device to have it returned immediately. - */ - ECHO_CMD = 0x3, - - /** - * @INIT_COMPLETE_NOTIF: Notification that initialization is complete. - */ - INIT_COMPLETE_NOTIF = 0x4, - - /** - * @PHY_CONTEXT_CMD: - * Add/modify/remove a PHY context, using &struct iwl_phy_context_cmd. - */ - PHY_CONTEXT_CMD = 0x8, - - /** - * @DBG_CFG: Debug configuration command. - */ - DBG_CFG = 0x9, - - /** - * @ANTENNA_COUPLING_NOTIFICATION: - * Antenna coupling data, &struct iwl_mvm_antenna_coupling_notif - */ - ANTENNA_COUPLING_NOTIFICATION = 0xa, - - /** - * @SCAN_ITERATION_COMPLETE_UMAC: - * Firmware indicates a scan iteration completed, using - * &struct iwl_umac_scan_iter_complete_notif. - */ - SCAN_ITERATION_COMPLETE_UMAC = 0xb5, - - /** - * @SCAN_CFG_CMD: - * uses &struct iwl_scan_config_v1 or &struct iwl_scan_config - */ - SCAN_CFG_CMD = 0xc, - - /** - * @SCAN_REQ_UMAC: uses &struct iwl_scan_req_umac - */ - SCAN_REQ_UMAC = 0xd, - - /** - * @SCAN_ABORT_UMAC: uses &struct iwl_umac_scan_abort - */ - SCAN_ABORT_UMAC = 0xe, - - /** - * @SCAN_COMPLETE_UMAC: uses &struct iwl_umac_scan_complete - */ - SCAN_COMPLETE_UMAC = 0xf, - - /** - * @BA_WINDOW_STATUS_NOTIFICATION_ID: - * uses &struct iwl_ba_window_status_notif - */ - BA_WINDOW_STATUS_NOTIFICATION_ID = 0x13, - - /** - * @ADD_STA_KEY: - * &struct iwl_mvm_add_sta_key_cmd_v1 or - * &struct iwl_mvm_add_sta_key_cmd. - */ - ADD_STA_KEY = 0x17, - - /** - * @ADD_STA: - * &struct iwl_mvm_add_sta_cmd or &struct iwl_mvm_add_sta_cmd_v7. - */ - ADD_STA = 0x18, - - /** - * @REMOVE_STA: &struct iwl_mvm_rm_sta_cmd - */ - REMOVE_STA = 0x19, - - /** - * @FW_GET_ITEM_CMD: uses &struct iwl_fw_get_item_cmd - */ - FW_GET_ITEM_CMD = 0x1a, - - /** - * @TX_CMD: uses &struct iwl_tx_cmd or &struct iwl_tx_cmd_gen2, - * response in &struct iwl_mvm_tx_resp or - * &struct iwl_mvm_tx_resp_v3 - */ - TX_CMD = 0x1c, - - /** - * @TXPATH_FLUSH: &struct iwl_tx_path_flush_cmd - */ - TXPATH_FLUSH = 0x1e, - - /** - * @MGMT_MCAST_KEY: - * &struct iwl_mvm_mgmt_mcast_key_cmd or - * &struct iwl_mvm_mgmt_mcast_key_cmd_v1 - */ - MGMT_MCAST_KEY = 0x1f, - - /* scheduler config */ - /** - * @SCD_QUEUE_CFG: &struct iwl_scd_txq_cfg_cmd for older hardware, - * &struct iwl_tx_queue_cfg_cmd with &struct iwl_tx_queue_cfg_rsp - * for newer (A000) hardware. - */ - SCD_QUEUE_CFG = 0x1d, - - /** - * @WEP_KEY: uses &struct iwl_mvm_wep_key_cmd - */ - WEP_KEY = 0x20, - - /** - * @SHARED_MEM_CFG: - * retrieve shared memory configuration - response in - * &struct iwl_shared_mem_cfg - */ - SHARED_MEM_CFG = 0x25, - - /** - * @TDLS_CHANNEL_SWITCH_CMD: uses &struct iwl_tdls_channel_switch_cmd - */ - TDLS_CHANNEL_SWITCH_CMD = 0x27, - - /** - * @TDLS_CHANNEL_SWITCH_NOTIFICATION: - * uses &struct iwl_tdls_channel_switch_notif - */ - TDLS_CHANNEL_SWITCH_NOTIFICATION = 0xaa, - - /** - * @TDLS_CONFIG_CMD: - * &struct iwl_tdls_config_cmd, response in &struct iwl_tdls_config_res - */ - TDLS_CONFIG_CMD = 0xa7, - - /** - * @MAC_CONTEXT_CMD: &struct iwl_mac_ctx_cmd - */ - MAC_CONTEXT_CMD = 0x28, - - /** - * @TIME_EVENT_CMD: - * &struct iwl_time_event_cmd, response in &struct iwl_time_event_resp - */ - TIME_EVENT_CMD = 0x29, /* both CMD and response */ - - /** - * @TIME_EVENT_NOTIFICATION: &struct iwl_time_event_notif - */ - TIME_EVENT_NOTIFICATION = 0x2a, - - /** - * @BINDING_CONTEXT_CMD: - * &struct iwl_binding_cmd or &struct iwl_binding_cmd_v1 - */ - BINDING_CONTEXT_CMD = 0x2b, - - /** - * @TIME_QUOTA_CMD: &struct iwl_time_quota_cmd - */ - TIME_QUOTA_CMD = 0x2c, - - /** - * @NON_QOS_TX_COUNTER_CMD: - * command is &struct iwl_nonqos_seq_query_cmd - */ - NON_QOS_TX_COUNTER_CMD = 0x2d, - - /** - * @LQ_CMD: using &struct iwl_lq_cmd - */ - LQ_CMD = 0x4e, - - /** - * @FW_PAGING_BLOCK_CMD: - * &struct iwl_fw_paging_cmd - */ - FW_PAGING_BLOCK_CMD = 0x4f, - - /** - * @SCAN_OFFLOAD_REQUEST_CMD: uses &struct iwl_scan_req_lmac - */ - SCAN_OFFLOAD_REQUEST_CMD = 0x51, - - /** - * @SCAN_OFFLOAD_ABORT_CMD: abort the scan - no further contents - */ - SCAN_OFFLOAD_ABORT_CMD = 0x52, - - /** - * @HOT_SPOT_CMD: uses &struct iwl_hs20_roc_req - */ - HOT_SPOT_CMD = 0x53, - - /** - * @SCAN_OFFLOAD_COMPLETE: - * notification, &struct iwl_periodic_scan_complete - */ - SCAN_OFFLOAD_COMPLETE = 0x6D, - - /** - * @SCAN_OFFLOAD_UPDATE_PROFILES_CMD: - * update scan offload (scheduled scan) profiles/blacklist/etc. - */ - SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E, - - /** - * @MATCH_FOUND_NOTIFICATION: scan match found - */ - MATCH_FOUND_NOTIFICATION = 0xd9, - - /** - * @SCAN_ITERATION_COMPLETE: - * uses &struct iwl_lmac_scan_complete_notif - */ - SCAN_ITERATION_COMPLETE = 0xe7, - - /* Phy */ - /** - * @PHY_CONFIGURATION_CMD: &struct iwl_phy_cfg_cmd - */ - PHY_CONFIGURATION_CMD = 0x6a, - - /** - * @CALIB_RES_NOTIF_PHY_DB: &struct iwl_calib_res_notif_phy_db - */ - CALIB_RES_NOTIF_PHY_DB = 0x6b, - - /** - * @PHY_DB_CMD: &struct iwl_phy_db_cmd - */ - PHY_DB_CMD = 0x6c, - - /** - * @TOF_CMD: &struct iwl_tof_config_cmd - */ - TOF_CMD = 0x10, - - /** - * @TOF_NOTIFICATION: &struct iwl_tof_gen_resp_cmd - */ - TOF_NOTIFICATION = 0x11, - - /** - * @POWER_TABLE_CMD: &struct iwl_device_power_cmd - */ - POWER_TABLE_CMD = 0x77, - - /** - * @PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION: - * &struct iwl_uapsd_misbehaving_ap_notif - */ - PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78, - - /** - * @LTR_CONFIG: &struct iwl_ltr_config_cmd - */ - LTR_CONFIG = 0xee, - - /** - * @REPLY_THERMAL_MNG_BACKOFF: - * Thermal throttling command - */ - REPLY_THERMAL_MNG_BACKOFF = 0x7e, - - /** - * @DC2DC_CONFIG_CMD: - * Set/Get DC2DC frequency tune - * Command is &struct iwl_dc2dc_config_cmd, - * response is &struct iwl_dc2dc_config_resp - */ - DC2DC_CONFIG_CMD = 0x83, - - /** - * @NVM_ACCESS_CMD: using &struct iwl_nvm_access_cmd - */ - NVM_ACCESS_CMD = 0x88, - - /** - * @BEACON_NOTIFICATION: &struct iwl_extended_beacon_notif - */ - BEACON_NOTIFICATION = 0x90, - - /** - * @BEACON_TEMPLATE_CMD: - * Uses one of &struct iwl_mac_beacon_cmd_v6, - * &struct iwl_mac_beacon_cmd_v7 or &struct iwl_mac_beacon_cmd - * depending on the device version. - */ - BEACON_TEMPLATE_CMD = 0x91, - /** - * @TX_ANT_CONFIGURATION_CMD: &struct iwl_tx_ant_cfg_cmd - */ - TX_ANT_CONFIGURATION_CMD = 0x98, - - /** - * @STATISTICS_CMD: - * one of &struct iwl_statistics_cmd, - * &struct iwl_notif_statistics_v11, - * &struct iwl_notif_statistics_v10, - * &struct iwl_notif_statistics_cdb - */ - STATISTICS_CMD = 0x9c, - - /** - * @STATISTICS_NOTIFICATION: - * one of &struct iwl_notif_statistics_v10, - * &struct iwl_notif_statistics_v11, - * &struct iwl_notif_statistics_cdb - */ - STATISTICS_NOTIFICATION = 0x9d, - - /** - * @EOSP_NOTIFICATION: - * Notify that a service period ended, - * &struct iwl_mvm_eosp_notification - */ - EOSP_NOTIFICATION = 0x9e, - - /** - * @REDUCE_TX_POWER_CMD: - * &struct iwl_dev_tx_power_cmd_v3 or &struct iwl_dev_tx_power_cmd - */ - REDUCE_TX_POWER_CMD = 0x9f, - - /** - * @CARD_STATE_NOTIFICATION: - * Card state (RF/CT kill) notification, - * uses &struct iwl_card_state_notif - */ - CARD_STATE_NOTIFICATION = 0xa1, - - /** - * @MISSED_BEACONS_NOTIFICATION: &struct iwl_missed_beacons_notif - */ - MISSED_BEACONS_NOTIFICATION = 0xa2, - - /** - * @MAC_PM_POWER_TABLE: using &struct iwl_mac_power_cmd - */ - MAC_PM_POWER_TABLE = 0xa9, - - /** - * @MFUART_LOAD_NOTIFICATION: &struct iwl_mfuart_load_notif - */ - MFUART_LOAD_NOTIFICATION = 0xb1, - - /** - * @RSS_CONFIG_CMD: &struct iwl_rss_config_cmd - */ - RSS_CONFIG_CMD = 0xb3, - - /** - * @REPLY_RX_PHY_CMD: &struct iwl_rx_phy_info - */ - REPLY_RX_PHY_CMD = 0xc0, - - /** - * @REPLY_RX_MPDU_CMD: - * &struct iwl_rx_mpdu_res_start or &struct iwl_rx_mpdu_desc - */ - REPLY_RX_MPDU_CMD = 0xc1, - - /** - * @FRAME_RELEASE: - * Frame release (reorder helper) notification, uses - * &struct iwl_frame_release - */ - FRAME_RELEASE = 0xc3, - - /** - * @BA_NOTIF: - * BlockAck notification, uses &struct iwl_mvm_compressed_ba_notif - * or &struct iwl_mvm_ba_notif depending on the HW - */ - BA_NOTIF = 0xc5, - - /* Location Aware Regulatory */ - /** - * @MCC_UPDATE_CMD: using &struct iwl_mcc_update_cmd - */ - MCC_UPDATE_CMD = 0xc8, - - /** - * @MCC_CHUB_UPDATE_CMD: using &struct iwl_mcc_chub_notif - */ - MCC_CHUB_UPDATE_CMD = 0xc9, - - /** - * @MARKER_CMD: trace marker command, uses &struct iwl_mvm_marker - */ - MARKER_CMD = 0xcb, - - /** - * @BT_PROFILE_NOTIFICATION: &struct iwl_bt_coex_profile_notif - */ - BT_PROFILE_NOTIFICATION = 0xce, - - /** - * @BT_CONFIG: &struct iwl_bt_coex_cmd - */ - BT_CONFIG = 0x9b, - - /** - * @BT_COEX_UPDATE_CORUN_LUT: - * &struct iwl_bt_coex_corun_lut_update_cmd - */ - BT_COEX_UPDATE_CORUN_LUT = 0x5b, - - /** - * @BT_COEX_UPDATE_REDUCED_TXP: - * &struct iwl_bt_coex_reduced_txp_update_cmd - */ - BT_COEX_UPDATE_REDUCED_TXP = 0x5c, - - /** - * @BT_COEX_CI: &struct iwl_bt_coex_ci_cmd - */ - BT_COEX_CI = 0x5d, - - /** - * @REPLY_SF_CFG_CMD: &struct iwl_sf_cfg_cmd - */ - REPLY_SF_CFG_CMD = 0xd1, - /** - * @REPLY_BEACON_FILTERING_CMD: &struct iwl_beacon_filter_cmd - */ - REPLY_BEACON_FILTERING_CMD = 0xd2, - - /** - * @DTS_MEASUREMENT_NOTIFICATION: - * &struct iwl_dts_measurement_notif_v1 or - * &struct iwl_dts_measurement_notif_v2 - */ - DTS_MEASUREMENT_NOTIFICATION = 0xdd, - - /** - * @LDBG_CONFIG_CMD: configure continuous trace recording - */ - LDBG_CONFIG_CMD = 0xf6, - - /** - * @DEBUG_LOG_MSG: Debugging log data from firmware - */ - DEBUG_LOG_MSG = 0xf7, - - /** - * @BCAST_FILTER_CMD: &struct iwl_bcast_filter_cmd - */ - BCAST_FILTER_CMD = 0xcf, - - /** - * @MCAST_FILTER_CMD: &struct iwl_mcast_filter_cmd - */ - MCAST_FILTER_CMD = 0xd0, - - /** - * @D3_CONFIG_CMD: &struct iwl_d3_manager_config - */ - D3_CONFIG_CMD = 0xd3, - - /** - * @PROT_OFFLOAD_CONFIG_CMD: Depending on firmware, uses one of - * &struct iwl_proto_offload_cmd_v1, &struct iwl_proto_offload_cmd_v2, - * &struct iwl_proto_offload_cmd_v3_small, - * &struct iwl_proto_offload_cmd_v3_large - */ - PROT_OFFLOAD_CONFIG_CMD = 0xd4, - - /** - * @OFFLOADS_QUERY_CMD: - * No data in command, response in &struct iwl_wowlan_status - */ - OFFLOADS_QUERY_CMD = 0xd5, - - /** - * @REMOTE_WAKE_CONFIG_CMD: &struct iwl_wowlan_remote_wake_config - */ - REMOTE_WAKE_CONFIG_CMD = 0xd6, - - /** - * @D0I3_END_CMD: End D0i3/D3 state, no command data - */ - D0I3_END_CMD = 0xed, - - /** - * @WOWLAN_PATTERNS: &struct iwl_wowlan_patterns_cmd - */ - WOWLAN_PATTERNS = 0xe0, - - /** - * @WOWLAN_CONFIGURATION: &struct iwl_wowlan_config_cmd - */ - WOWLAN_CONFIGURATION = 0xe1, - - /** - * @WOWLAN_TSC_RSC_PARAM: &struct iwl_wowlan_rsc_tsc_params_cmd - */ - WOWLAN_TSC_RSC_PARAM = 0xe2, - - /** - * @WOWLAN_TKIP_PARAM: &struct iwl_wowlan_tkip_params_cmd - */ - WOWLAN_TKIP_PARAM = 0xe3, - - /** - * @WOWLAN_KEK_KCK_MATERIAL: &struct iwl_wowlan_kek_kck_material_cmd - */ - WOWLAN_KEK_KCK_MATERIAL = 0xe4, - - /** - * @WOWLAN_GET_STATUSES: response in &struct iwl_wowlan_status - */ - WOWLAN_GET_STATUSES = 0xe5, - - /** - * @SCAN_OFFLOAD_PROFILES_QUERY_CMD: - * No command data, response is &struct iwl_scan_offload_profiles_query - */ - SCAN_OFFLOAD_PROFILES_QUERY_CMD = 0x56, -}; - -/* Please keep this enum *SORTED* by hex value. - * Needed for binary search, otherwise a warning will be triggered. - */ -enum iwl_mac_conf_subcmd_ids { - LINK_QUALITY_MEASUREMENT_CMD = 0x1, - LINK_QUALITY_MEASUREMENT_COMPLETE_NOTIF = 0xFE, - CHANNEL_SWITCH_NOA_NOTIF = 0xFF, -}; - -/** - * enum iwl_phy_ops_subcmd_ids - PHY group commands - */ -enum iwl_phy_ops_subcmd_ids { - /** - * @CMD_DTS_MEASUREMENT_TRIGGER_WIDE: - * Uses either &struct iwl_dts_measurement_cmd or - * &struct iwl_ext_dts_measurement_cmd - */ - CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0, - - /** - * @CTDP_CONFIG_CMD: &struct iwl_mvm_ctdp_cmd - */ - CTDP_CONFIG_CMD = 0x03, - - /** - * @TEMP_REPORTING_THRESHOLDS_CMD: &struct temp_report_ths_cmd - */ - TEMP_REPORTING_THRESHOLDS_CMD = 0x04, - - /** - * @GEO_TX_POWER_LIMIT: &struct iwl_geo_tx_power_profiles_cmd - */ - GEO_TX_POWER_LIMIT = 0x05, - - /** - * @CT_KILL_NOTIFICATION: &struct ct_kill_notif - */ - CT_KILL_NOTIFICATION = 0xFE, - - /** - * @DTS_MEASUREMENT_NOTIF_WIDE: - * &struct iwl_dts_measurement_notif_v1 or - * &struct iwl_dts_measurement_notif_v2 - */ - DTS_MEASUREMENT_NOTIF_WIDE = 0xFF, -}; - -/** - * enum iwl_system_subcmd_ids - system group command IDs - */ -enum iwl_system_subcmd_ids { - /** - * @SHARED_MEM_CFG_CMD: - * response in &struct iwl_shared_mem_cfg or - * &struct iwl_shared_mem_cfg_v2 - */ - SHARED_MEM_CFG_CMD = 0x0, - - /** - * @INIT_EXTENDED_CFG_CMD: &struct iwl_init_extended_cfg_cmd - */ - INIT_EXTENDED_CFG_CMD = 0x03, -}; - -/** - * enum iwl_data_path_subcmd_ids - data path group commands - */ -enum iwl_data_path_subcmd_ids { - /** - * @DQA_ENABLE_CMD: &struct iwl_dqa_enable_cmd - */ - DQA_ENABLE_CMD = 0x0, - - /** - * @UPDATE_MU_GROUPS_CMD: &struct iwl_mu_group_mgmt_cmd - */ - UPDATE_MU_GROUPS_CMD = 0x1, - - /** - * @TRIGGER_RX_QUEUES_NOTIF_CMD: &struct iwl_rxq_sync_cmd - */ - TRIGGER_RX_QUEUES_NOTIF_CMD = 0x2, - - /** - * @STA_PM_NOTIF: &struct iwl_mvm_pm_state_notification - */ - STA_PM_NOTIF = 0xFD, - - /** - * @MU_GROUP_MGMT_NOTIF: &struct iwl_mu_group_mgmt_notif - */ - MU_GROUP_MGMT_NOTIF = 0xFE, - - /** - * @RX_QUEUES_NOTIFICATION: &struct iwl_rxq_sync_notification - */ - RX_QUEUES_NOTIFICATION = 0xFF, -}; - -/** - * enum iwl_prot_offload_subcmd_ids - protocol offload commands - */ -enum iwl_prot_offload_subcmd_ids { - /** - * @STORED_BEACON_NTF: &struct iwl_stored_beacon_notif - */ - STORED_BEACON_NTF = 0xFF, -}; - -/** - * enum iwl_regulatory_and_nvm_subcmd_ids - regulatory/NVM commands - */ -enum iwl_regulatory_and_nvm_subcmd_ids { - /** - * @NVM_ACCESS_COMPLETE: &struct iwl_nvm_access_complete_cmd - */ - NVM_ACCESS_COMPLETE = 0x0, - - /** - * @NVM_GET_INFO: - * Command is &struct iwl_nvm_get_info, - * response is &struct iwl_nvm_get_info_rsp - */ - NVM_GET_INFO = 0x2, -}; - -/** - * enum iwl_debug_cmds - debug commands - */ -enum iwl_debug_cmds { - /** - * @LMAC_RD_WR: - * LMAC memory read/write, using &struct iwl_dbg_mem_access_cmd and - * &struct iwl_dbg_mem_access_rsp - */ - LMAC_RD_WR = 0x0, - /** - * @UMAC_RD_WR: - * UMAC memory read/write, using &struct iwl_dbg_mem_access_cmd and - * &struct iwl_dbg_mem_access_rsp - */ - UMAC_RD_WR = 0x1, - /** - * @MFU_ASSERT_DUMP_NTF: - * &struct iwl_mfu_assert_dump_notif - */ - MFU_ASSERT_DUMP_NTF = 0xFE, -}; - -/** - * enum iwl_mvm_command_groups - command groups for the firmware - * @LEGACY_GROUP: legacy group, uses command IDs from &enum iwl_legacy_cmds - * @LONG_GROUP: legacy group with long header, also uses command IDs - * from &enum iwl_legacy_cmds - * @SYSTEM_GROUP: system group, uses command IDs from - * &enum iwl_system_subcmd_ids - * @MAC_CONF_GROUP: MAC configuration group, uses command IDs from - * &enum iwl_mac_conf_subcmd_ids - * @PHY_OPS_GROUP: PHY operations group, uses command IDs from - * &enum iwl_phy_ops_subcmd_ids - * @DATA_PATH_GROUP: data path group, uses command IDs from - * &enum iwl_data_path_subcmd_ids - * @NAN_GROUP: NAN group, uses command IDs from &enum iwl_nan_subcmd_ids - * @TOF_GROUP: TOF group, uses command IDs from &enum iwl_tof_subcmd_ids - * @PROT_OFFLOAD_GROUP: protocol offload group, uses command IDs from - * &enum iwl_prot_offload_subcmd_ids - * @REGULATORY_AND_NVM_GROUP: regulatory/NVM group, uses command IDs from - * &enum iwl_regulatory_and_nvm_subcmd_ids - * @DEBUG_GROUP: Debug group, uses command IDs from &enum iwl_debug_cmds - */ -enum iwl_mvm_command_groups { - LEGACY_GROUP = 0x0, - LONG_GROUP = 0x1, - SYSTEM_GROUP = 0x2, - MAC_CONF_GROUP = 0x3, - PHY_OPS_GROUP = 0x4, - DATA_PATH_GROUP = 0x5, - PROT_OFFLOAD_GROUP = 0xb, - REGULATORY_AND_NVM_GROUP = 0xc, - DEBUG_GROUP = 0xf, -}; - -/** - * struct iwl_cmd_response - generic response struct for most commands - * @status: status of the command asked, changes for each one - */ -struct iwl_cmd_response { - __le32 status; -}; - -/* - * struct iwl_dqa_enable_cmd - * @cmd_queue: the TXQ number of the command queue - */ -struct iwl_dqa_enable_cmd { - __le32 cmd_queue; -} __packed; /* DQA_CONTROL_CMD_API_S_VER_1 */ - -/* - * struct iwl_tx_ant_cfg_cmd - * @valid: valid antenna configuration - */ -struct iwl_tx_ant_cfg_cmd { - __le32 valid; -} __packed; - -/** - * struct iwl_calib_ctrl - Calibration control struct. - * Sent as part of the phy configuration command. - * @flow_trigger: bitmap for which calibrations to perform according to - * flow triggers, using &enum iwl_calib_cfg - * @event_trigger: bitmap for which calibrations to perform according to - * event triggers, using &enum iwl_calib_cfg - */ -struct iwl_calib_ctrl { - __le32 flow_trigger; - __le32 event_trigger; -} __packed; - -/* This enum defines the bitmap of various calibrations to enable in both - * init ucode and runtime ucode through CALIBRATION_CFG_CMD. - */ -enum iwl_calib_cfg { - IWL_CALIB_CFG_XTAL_IDX = BIT(0), - IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(1), - IWL_CALIB_CFG_VOLTAGE_READ_IDX = BIT(2), - IWL_CALIB_CFG_PAPD_IDX = BIT(3), - IWL_CALIB_CFG_TX_PWR_IDX = BIT(4), - IWL_CALIB_CFG_DC_IDX = BIT(5), - IWL_CALIB_CFG_BB_FILTER_IDX = BIT(6), - IWL_CALIB_CFG_LO_LEAKAGE_IDX = BIT(7), - IWL_CALIB_CFG_TX_IQ_IDX = BIT(8), - IWL_CALIB_CFG_TX_IQ_SKEW_IDX = BIT(9), - IWL_CALIB_CFG_RX_IQ_IDX = BIT(10), - IWL_CALIB_CFG_RX_IQ_SKEW_IDX = BIT(11), - IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(12), - IWL_CALIB_CFG_CHAIN_NOISE_IDX = BIT(13), - IWL_CALIB_CFG_DISCONNECTED_ANT_IDX = BIT(14), - IWL_CALIB_CFG_ANT_COUPLING_IDX = BIT(15), - IWL_CALIB_CFG_DAC_IDX = BIT(16), - IWL_CALIB_CFG_ABS_IDX = BIT(17), - IWL_CALIB_CFG_AGC_IDX = BIT(18), -}; - -/** - * struct iwl_phy_cfg_cmd - Phy configuration command - * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg - * @calib_control: calibration control data - */ -struct iwl_phy_cfg_cmd { - __le32 phy_cfg; - struct iwl_calib_ctrl calib_control; -} __packed; - -#define PHY_CFG_RADIO_TYPE (BIT(0) | BIT(1)) -#define PHY_CFG_RADIO_STEP (BIT(2) | BIT(3)) -#define PHY_CFG_RADIO_DASH (BIT(4) | BIT(5)) -#define PHY_CFG_PRODUCT_NUMBER (BIT(6) | BIT(7)) -#define PHY_CFG_TX_CHAIN_A BIT(8) -#define PHY_CFG_TX_CHAIN_B BIT(9) -#define PHY_CFG_TX_CHAIN_C BIT(10) -#define PHY_CFG_RX_CHAIN_A BIT(12) -#define PHY_CFG_RX_CHAIN_B BIT(13) -#define PHY_CFG_RX_CHAIN_C BIT(14) - - -/** - * enum iwl_nvm_access_op - NVM access opcode - * @IWL_NVM_READ: read NVM - * @IWL_NVM_WRITE: write NVM - */ -enum iwl_nvm_access_op { - IWL_NVM_READ = 0, - IWL_NVM_WRITE = 1, -}; - -/** - * enum iwl_nvm_access_target - target of the NVM_ACCESS_CMD - * @NVM_ACCESS_TARGET_CACHE: access the cache - * @NVM_ACCESS_TARGET_OTP: access the OTP - * @NVM_ACCESS_TARGET_EEPROM: access the EEPROM - */ -enum iwl_nvm_access_target { - NVM_ACCESS_TARGET_CACHE = 0, - NVM_ACCESS_TARGET_OTP = 1, - NVM_ACCESS_TARGET_EEPROM = 2, -}; - -/** - * enum iwl_nvm_section_type - section types for NVM_ACCESS_CMD - * @NVM_SECTION_TYPE_SW: software section - * @NVM_SECTION_TYPE_REGULATORY: regulatory section - * @NVM_SECTION_TYPE_CALIBRATION: calibration section - * @NVM_SECTION_TYPE_PRODUCTION: production section - * @NVM_SECTION_TYPE_MAC_OVERRIDE: MAC override section - * @NVM_SECTION_TYPE_PHY_SKU: PHY SKU section - * @NVM_MAX_NUM_SECTIONS: number of sections - */ -enum iwl_nvm_section_type { - NVM_SECTION_TYPE_SW = 1, - NVM_SECTION_TYPE_REGULATORY = 3, - NVM_SECTION_TYPE_CALIBRATION = 4, - NVM_SECTION_TYPE_PRODUCTION = 5, - NVM_SECTION_TYPE_MAC_OVERRIDE = 11, - NVM_SECTION_TYPE_PHY_SKU = 12, - NVM_MAX_NUM_SECTIONS = 13, -}; - -/** - * struct iwl_nvm_access_cmd - Request the device to send an NVM section - * @op_code: &enum iwl_nvm_access_op - * @target: &enum iwl_nvm_access_target - * @type: &enum iwl_nvm_section_type - * @offset: offset in bytes into the section - * @length: in bytes, to read/write - * @data: if write operation, the data to write. On read its empty - */ -struct iwl_nvm_access_cmd { - u8 op_code; - u8 target; - __le16 type; - __le16 offset; - __le16 length; - u8 data[]; -} __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */ - -#define CONT_REC_COMMAND_SIZE 80 -#define ENABLE_CONT_RECORDING 0x15 -#define DISABLE_CONT_RECORDING 0x16 - -/* - * struct iwl_continuous_record_mode - recording mode - */ -struct iwl_continuous_record_mode { - __le16 enable_recording; -} __packed; - -/* - * struct iwl_continuous_record_cmd - enable/disable continuous recording - */ -struct iwl_continuous_record_cmd { - struct iwl_continuous_record_mode record_mode; - u8 pad[CONT_REC_COMMAND_SIZE - - sizeof(struct iwl_continuous_record_mode)]; -} __packed; - -/** - * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD - * @offset: offset in bytes into the section - * @length: in bytes, either how much was written or read - * @type: NVM_SECTION_TYPE_* - * @status: 0 for success, fail otherwise - * @data: if read operation, the data returned. Empty on write. - */ -struct iwl_nvm_access_resp { - __le16 offset; - __le16 length; - __le16 type; - __le16 status; - u8 data[]; -} __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */ - -/* MVM_ALIVE 0x1 */ - -/* alive response is_valid values */ -#define ALIVE_RESP_UCODE_OK BIT(0) -#define ALIVE_RESP_RFKILL BIT(1) - -/* alive response ver_type values */ -enum { - FW_TYPE_HW = 0, - FW_TYPE_PROT = 1, - FW_TYPE_AP = 2, - FW_TYPE_WOWLAN = 3, - FW_TYPE_TIMING = 4, - FW_TYPE_WIPAN = 5 -}; - -/* alive response ver_subtype values */ -enum { - FW_SUBTYPE_FULL_FEATURE = 0, - FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */ - FW_SUBTYPE_REDUCED = 2, - FW_SUBTYPE_ALIVE_ONLY = 3, - FW_SUBTYPE_WOWLAN = 4, - FW_SUBTYPE_AP_SUBTYPE = 5, - FW_SUBTYPE_WIPAN = 6, - FW_SUBTYPE_INITIALIZE = 9 -}; - -#define IWL_ALIVE_STATUS_ERR 0xDEAD -#define IWL_ALIVE_STATUS_OK 0xCAFE - -#define IWL_ALIVE_FLG_RFKILL BIT(0) - -struct iwl_lmac_alive { - __le32 ucode_minor; - __le32 ucode_major; - u8 ver_subtype; - u8 ver_type; - u8 mac; - u8 opt; - __le32 timestamp; - __le32 error_event_table_ptr; /* SRAM address for error log */ - __le32 log_event_table_ptr; /* SRAM address for LMAC event log */ - __le32 cpu_register_ptr; - __le32 dbgm_config_ptr; - __le32 alive_counter_ptr; - __le32 scd_base_ptr; /* SRAM address for SCD */ - __le32 st_fwrd_addr; /* pointer to Store and forward */ - __le32 st_fwrd_size; -} __packed; /* UCODE_ALIVE_NTFY_API_S_VER_3 */ - -struct iwl_umac_alive { - __le32 umac_minor; /* UMAC version: minor */ - __le32 umac_major; /* UMAC version: major */ - __le32 error_info_addr; /* SRAM address for UMAC error log */ - __le32 dbg_print_buff_addr; -} __packed; /* UMAC_ALIVE_DATA_API_S_VER_2 */ - -struct mvm_alive_resp_v3 { - __le16 status; - __le16 flags; - struct iwl_lmac_alive lmac_data; - struct iwl_umac_alive umac_data; -} __packed; /* ALIVE_RES_API_S_VER_3 */ - -struct mvm_alive_resp { - __le16 status; - __le16 flags; - struct iwl_lmac_alive lmac_data[2]; - struct iwl_umac_alive umac_data; -} __packed; /* ALIVE_RES_API_S_VER_4 */ - -/* Error response/notification */ -enum { - FW_ERR_UNKNOWN_CMD = 0x0, - FW_ERR_INVALID_CMD_PARAM = 0x1, - FW_ERR_SERVICE = 0x2, - FW_ERR_ARC_MEMORY = 0x3, - FW_ERR_ARC_CODE = 0x4, - FW_ERR_WATCH_DOG = 0x5, - FW_ERR_WEP_GRP_KEY_INDX = 0x10, - FW_ERR_WEP_KEY_SIZE = 0x11, - FW_ERR_OBSOLETE_FUNC = 0x12, - FW_ERR_UNEXPECTED = 0xFE, - FW_ERR_FATAL = 0xFF -}; - -/** - * struct iwl_error_resp - FW error indication - * ( REPLY_ERROR = 0x2 ) - * @error_type: one of FW_ERR_* - * @cmd_id: the command ID for which the error occured - * @reserved1: reserved - * @bad_cmd_seq_num: sequence number of the erroneous command - * @error_service: which service created the error, applicable only if - * error_type = 2, otherwise 0 - * @timestamp: TSF in usecs. - */ -struct iwl_error_resp { - __le32 error_type; - u8 cmd_id; - u8 reserved1; - __le16 bad_cmd_seq_num; - __le32 error_service; - __le64 timestamp; -} __packed; - - -/* Common PHY, MAC and Bindings definitions */ -#define MAX_MACS_IN_BINDING (3) -#define MAX_BINDINGS (4) - -/** - * enum iwl_mvm_id_and_color - ID and color fields in context dword - * @FW_CTXT_ID_POS: position of the ID - * @FW_CTXT_ID_MSK: mask of the ID - * @FW_CTXT_COLOR_POS: position of the color - * @FW_CTXT_COLOR_MSK: mask of the color - * @FW_CTXT_INVALID: value used to indicate unused/invalid - */ -enum iwl_mvm_id_and_color { - FW_CTXT_ID_POS = 0, - FW_CTXT_ID_MSK = 0xff << FW_CTXT_ID_POS, - FW_CTXT_COLOR_POS = 8, - FW_CTXT_COLOR_MSK = 0xff << FW_CTXT_COLOR_POS, - FW_CTXT_INVALID = 0xffffffff, -}; - -#define FW_CMD_ID_AND_COLOR(_id, _color) ((_id << FW_CTXT_ID_POS) |\ - (_color << FW_CTXT_COLOR_POS)) - -/* Possible actions on PHYs, MACs and Bindings */ -enum iwl_phy_ctxt_action { - FW_CTXT_ACTION_STUB = 0, - FW_CTXT_ACTION_ADD, - FW_CTXT_ACTION_MODIFY, - FW_CTXT_ACTION_REMOVE, - FW_CTXT_ACTION_NUM -}; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */ - -/* Time Events */ - -/* Time Event types, according to MAC type */ -enum iwl_time_event_type { - /* BSS Station Events */ - TE_BSS_STA_AGGRESSIVE_ASSOC, - TE_BSS_STA_ASSOC, - TE_BSS_EAP_DHCP_PROT, - TE_BSS_QUIET_PERIOD, - - /* P2P Device Events */ - TE_P2P_DEVICE_DISCOVERABLE, - TE_P2P_DEVICE_LISTEN, - TE_P2P_DEVICE_ACTION_SCAN, - TE_P2P_DEVICE_FULL_SCAN, - - /* P2P Client Events */ - TE_P2P_CLIENT_AGGRESSIVE_ASSOC, - TE_P2P_CLIENT_ASSOC, - TE_P2P_CLIENT_QUIET_PERIOD, - - /* P2P GO Events */ - TE_P2P_GO_ASSOC_PROT, - TE_P2P_GO_REPETITIVET_NOA, - TE_P2P_GO_CT_WINDOW, - - /* WiDi Sync Events */ - TE_WIDI_TX_SYNC, - - /* Channel Switch NoA */ - TE_CHANNEL_SWITCH_PERIOD, - - TE_MAX -}; /* MAC_EVENT_TYPE_API_E_VER_1 */ - - - -/* Time event - defines for command API v1 */ - -/* - * @TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed. - * @TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only - * the first fragment is scheduled. - * @TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only - * the first 2 fragments are scheduled. - * @TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any - * number of fragments are valid. - * - * Other than the constant defined above, specifying a fragmentation value 'x' - * means that the event can be fragmented but only the first 'x' will be - * scheduled. - */ -enum { - TE_V1_FRAG_NONE = 0, - TE_V1_FRAG_SINGLE = 1, - TE_V1_FRAG_DUAL = 2, - TE_V1_FRAG_ENDLESS = 0xffffffff -}; - -/* If a Time Event can be fragmented, this is the max number of fragments */ -#define TE_V1_FRAG_MAX_MSK 0x0fffffff -/* Repeat the time event endlessly (until removed) */ -#define TE_V1_REPEAT_ENDLESS 0xffffffff -/* If a Time Event has bounded repetitions, this is the maximal value */ -#define TE_V1_REPEAT_MAX_MSK_V1 0x0fffffff - -/* Time Event dependencies: none, on another TE, or in a specific time */ -enum { - TE_V1_INDEPENDENT = 0, - TE_V1_DEP_OTHER = BIT(0), - TE_V1_DEP_TSF = BIT(1), - TE_V1_EVENT_SOCIOPATHIC = BIT(2), -}; /* MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */ - -/* - * @TE_V1_NOTIF_NONE: no notifications - * @TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start - * @TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end - * @TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use - * @TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use. - * @TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start - * @TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end - * @TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use. - * @TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use. - * - * Supported Time event notifications configuration. - * A notification (both event and fragment) includes a status indicating weather - * the FW was able to schedule the event or not. For fragment start/end - * notification the status is always success. There is no start/end fragment - * notification for monolithic events. - */ -enum { - TE_V1_NOTIF_NONE = 0, - TE_V1_NOTIF_HOST_EVENT_START = BIT(0), - TE_V1_NOTIF_HOST_EVENT_END = BIT(1), - TE_V1_NOTIF_INTERNAL_EVENT_START = BIT(2), - TE_V1_NOTIF_INTERNAL_EVENT_END = BIT(3), - TE_V1_NOTIF_HOST_FRAG_START = BIT(4), - TE_V1_NOTIF_HOST_FRAG_END = BIT(5), - TE_V1_NOTIF_INTERNAL_FRAG_START = BIT(6), - TE_V1_NOTIF_INTERNAL_FRAG_END = BIT(7), -}; /* MAC_EVENT_ACTION_API_E_VER_2 */ - -/* Time event - defines for command API */ - -/* - * @TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed. - * @TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only - * the first fragment is scheduled. - * @TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only - * the first 2 fragments are scheduled. - * @TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any - * number of fragments are valid. - * - * Other than the constant defined above, specifying a fragmentation value 'x' - * means that the event can be fragmented but only the first 'x' will be - * scheduled. - */ -enum { - TE_V2_FRAG_NONE = 0, - TE_V2_FRAG_SINGLE = 1, - TE_V2_FRAG_DUAL = 2, - TE_V2_FRAG_MAX = 0xfe, - TE_V2_FRAG_ENDLESS = 0xff -}; - -/* Repeat the time event endlessly (until removed) */ -#define TE_V2_REPEAT_ENDLESS 0xff -/* If a Time Event has bounded repetitions, this is the maximal value */ -#define TE_V2_REPEAT_MAX 0xfe - -#define TE_V2_PLACEMENT_POS 12 -#define TE_V2_ABSENCE_POS 15 - -/** - * enum iwl_time_event_policy - Time event policy values - * A notification (both event and fragment) includes a status indicating weather - * the FW was able to schedule the event or not. For fragment start/end - * notification the status is always success. There is no start/end fragment - * notification for monolithic events. - * - * @TE_V2_DEFAULT_POLICY: independent, social, present, unoticable - * @TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start - * @TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end - * @TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use - * @TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use. - * @TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start - * @TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end - * @TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use. - * @TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use. - * @T2_V2_START_IMMEDIATELY: start time event immediately - * @TE_V2_DEP_OTHER: depends on another time event - * @TE_V2_DEP_TSF: depends on a specific time - * @TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC - * @TE_V2_ABSENCE: are we present or absent during the Time Event. - */ -enum iwl_time_event_policy { - TE_V2_DEFAULT_POLICY = 0x0, - - /* notifications (event start/stop, fragment start/stop) */ - TE_V2_NOTIF_HOST_EVENT_START = BIT(0), - TE_V2_NOTIF_HOST_EVENT_END = BIT(1), - TE_V2_NOTIF_INTERNAL_EVENT_START = BIT(2), - TE_V2_NOTIF_INTERNAL_EVENT_END = BIT(3), - - TE_V2_NOTIF_HOST_FRAG_START = BIT(4), - TE_V2_NOTIF_HOST_FRAG_END = BIT(5), - TE_V2_NOTIF_INTERNAL_FRAG_START = BIT(6), - TE_V2_NOTIF_INTERNAL_FRAG_END = BIT(7), - T2_V2_START_IMMEDIATELY = BIT(11), - - /* placement characteristics */ - TE_V2_DEP_OTHER = BIT(TE_V2_PLACEMENT_POS), - TE_V2_DEP_TSF = BIT(TE_V2_PLACEMENT_POS + 1), - TE_V2_EVENT_SOCIOPATHIC = BIT(TE_V2_PLACEMENT_POS + 2), - - /* are we present or absent during the Time Event. */ - TE_V2_ABSENCE = BIT(TE_V2_ABSENCE_POS), -}; - -/** - * struct iwl_time_event_cmd - configuring Time Events - * with struct MAC_TIME_EVENT_DATA_API_S_VER_2 (see also - * with version 1. determined by IWL_UCODE_TLV_FLAGS) - * ( TIME_EVENT_CMD = 0x29 ) - * @id_and_color: ID and color of the relevant MAC, - * &enum iwl_mvm_id_and_color - * @action: action to perform, one of &enum iwl_phy_ctxt_action - * @id: this field has two meanings, depending on the action: - * If the action is ADD, then it means the type of event to add. - * For all other actions it is the unique event ID assigned when the - * event was added by the FW. - * @apply_time: When to start the Time Event (in GP2) - * @max_delay: maximum delay to event's start (apply time), in TU - * @depends_on: the unique ID of the event we depend on (if any) - * @interval: interval between repetitions, in TU - * @duration: duration of event in TU - * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS - * @max_frags: maximal number of fragments the Time Event can be divided to - * @policy: defines whether uCode shall notify the host or other uCode modules - * on event and/or fragment start and/or end - * using one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF - * TE_EVENT_SOCIOPATHIC - * using TE_ABSENCE and using TE_NOTIF_*, - * &enum iwl_time_event_policy - */ -struct iwl_time_event_cmd { - /* COMMON_INDEX_HDR_API_S_VER_1 */ - __le32 id_and_color; - __le32 action; - __le32 id; - /* MAC_TIME_EVENT_DATA_API_S_VER_2 */ - __le32 apply_time; - __le32 max_delay; - __le32 depends_on; - __le32 interval; - __le32 duration; - u8 repeat; - u8 max_frags; - __le16 policy; -} __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_2 */ - -/** - * struct iwl_time_event_resp - response structure to iwl_time_event_cmd - * @status: bit 0 indicates success, all others specify errors - * @id: the Time Event type - * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE - * @id_and_color: ID and color of the relevant MAC, - * &enum iwl_mvm_id_and_color - */ -struct iwl_time_event_resp { - __le32 status; - __le32 id; - __le32 unique_id; - __le32 id_and_color; -} __packed; /* MAC_TIME_EVENT_RSP_API_S_VER_1 */ - -/** - * struct iwl_time_event_notif - notifications of time event start/stop - * ( TIME_EVENT_NOTIFICATION = 0x2a ) - * @timestamp: action timestamp in GP2 - * @session_id: session's unique id - * @unique_id: unique id of the Time Event itself - * @id_and_color: ID and color of the relevant MAC - * @action: &enum iwl_time_event_policy - * @status: true if scheduled, false otherwise (not executed) - */ -struct iwl_time_event_notif { - __le32 timestamp; - __le32 session_id; - __le32 unique_id; - __le32 id_and_color; - __le32 action; - __le32 status; -} __packed; /* MAC_TIME_EVENT_NTFY_API_S_VER_1 */ - - -/* Bindings and Time Quota */ - -/** - * struct iwl_binding_cmd_v1 - configuring bindings - * ( BINDING_CONTEXT_CMD = 0x2b ) - * @id_and_color: ID and color of the relevant Binding, - * &enum iwl_mvm_id_and_color - * @action: action to perform, one of FW_CTXT_ACTION_* - * @macs: array of MAC id and colors which belong to the binding, - * &enum iwl_mvm_id_and_color - * @phy: PHY id and color which belongs to the binding, - * &enum iwl_mvm_id_and_color - */ -struct iwl_binding_cmd_v1 { - /* COMMON_INDEX_HDR_API_S_VER_1 */ - __le32 id_and_color; - __le32 action; - /* BINDING_DATA_API_S_VER_1 */ - __le32 macs[MAX_MACS_IN_BINDING]; - __le32 phy; -} __packed; /* BINDING_CMD_API_S_VER_1 */ - -/** - * struct iwl_binding_cmd - configuring bindings - * ( BINDING_CONTEXT_CMD = 0x2b ) - * @id_and_color: ID and color of the relevant Binding, - * &enum iwl_mvm_id_and_color - * @action: action to perform, one of FW_CTXT_ACTION_* - * @macs: array of MAC id and colors which belong to the binding - * &enum iwl_mvm_id_and_color - * @phy: PHY id and color which belongs to the binding - * &enum iwl_mvm_id_and_color - * @lmac_id: the lmac id the binding belongs to - */ -struct iwl_binding_cmd { - /* COMMON_INDEX_HDR_API_S_VER_1 */ - __le32 id_and_color; - __le32 action; - /* BINDING_DATA_API_S_VER_1 */ - __le32 macs[MAX_MACS_IN_BINDING]; - __le32 phy; - __le32 lmac_id; -} __packed; /* BINDING_CMD_API_S_VER_2 */ - -#define IWL_BINDING_CMD_SIZE_V1 sizeof(struct iwl_binding_cmd_v1) -#define IWL_LMAC_24G_INDEX 0 -#define IWL_LMAC_5G_INDEX 1 - -/* The maximal number of fragments in the FW's schedule session */ -#define IWL_MVM_MAX_QUOTA 128 - -/** - * struct iwl_time_quota_data - configuration of time quota per binding - * @id_and_color: ID and color of the relevant Binding, - * &enum iwl_mvm_id_and_color - * @quota: absolute time quota in TU. The scheduler will try to divide the - * remainig quota (after Time Events) according to this quota. - * @max_duration: max uninterrupted context duration in TU - */ -struct iwl_time_quota_data { - __le32 id_and_color; - __le32 quota; - __le32 max_duration; -} __packed; /* TIME_QUOTA_DATA_API_S_VER_1 */ - -/** - * struct iwl_time_quota_cmd - configuration of time quota between bindings - * ( TIME_QUOTA_CMD = 0x2c ) - * @quotas: allocations per binding - * Note: on non-CDB the fourth one is the auxilary mac and is - * essentially zero. - * On CDB the fourth one is a regular binding. - */ -struct iwl_time_quota_cmd { - struct iwl_time_quota_data quotas[MAX_BINDINGS]; -} __packed; /* TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */ - - -/* PHY context */ - -/* Supported bands */ -#define PHY_BAND_5 (0) -#define PHY_BAND_24 (1) - -/* Supported channel width, vary if there is VHT support */ -#define PHY_VHT_CHANNEL_MODE20 (0x0) -#define PHY_VHT_CHANNEL_MODE40 (0x1) -#define PHY_VHT_CHANNEL_MODE80 (0x2) -#define PHY_VHT_CHANNEL_MODE160 (0x3) - -/* - * Control channel position: - * For legacy set bit means upper channel, otherwise lower. - * For VHT - bit-2 marks if the control is lower/upper relative to center-freq - * bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0. - * center_freq - * | - * 40Mhz |_______|_______| - * 80Mhz |_______|_______|_______|_______| - * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______| - * code 011 010 001 000 | 100 101 110 111 - */ -#define PHY_VHT_CTRL_POS_1_BELOW (0x0) -#define PHY_VHT_CTRL_POS_2_BELOW (0x1) -#define PHY_VHT_CTRL_POS_3_BELOW (0x2) -#define PHY_VHT_CTRL_POS_4_BELOW (0x3) -#define PHY_VHT_CTRL_POS_1_ABOVE (0x4) -#define PHY_VHT_CTRL_POS_2_ABOVE (0x5) -#define PHY_VHT_CTRL_POS_3_ABOVE (0x6) -#define PHY_VHT_CTRL_POS_4_ABOVE (0x7) - -/* - * @band: PHY_BAND_* - * @channel: channel number - * @width: PHY_[VHT|LEGACY]_CHANNEL_* - * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* - */ -struct iwl_fw_channel_info { - u8 band; - u8 channel; - u8 width; - u8 ctrl_pos; -} __packed; - -#define PHY_RX_CHAIN_DRIVER_FORCE_POS (0) -#define PHY_RX_CHAIN_DRIVER_FORCE_MSK \ - (0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS) -#define PHY_RX_CHAIN_VALID_POS (1) -#define PHY_RX_CHAIN_VALID_MSK \ - (0x7 << PHY_RX_CHAIN_VALID_POS) -#define PHY_RX_CHAIN_FORCE_SEL_POS (4) -#define PHY_RX_CHAIN_FORCE_SEL_MSK \ - (0x7 << PHY_RX_CHAIN_FORCE_SEL_POS) -#define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7) -#define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \ - (0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS) -#define PHY_RX_CHAIN_CNT_POS (10) -#define PHY_RX_CHAIN_CNT_MSK \ - (0x3 << PHY_RX_CHAIN_CNT_POS) -#define PHY_RX_CHAIN_MIMO_CNT_POS (12) -#define PHY_RX_CHAIN_MIMO_CNT_MSK \ - (0x3 << PHY_RX_CHAIN_MIMO_CNT_POS) -#define PHY_RX_CHAIN_MIMO_FORCE_POS (14) -#define PHY_RX_CHAIN_MIMO_FORCE_MSK \ - (0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS) - -/* TODO: fix the value, make it depend on firmware at runtime? */ -#define NUM_PHY_CTX 3 - -/* TODO: complete missing documentation */ -/** - * struct iwl_phy_context_cmd - config of the PHY context - * ( PHY_CONTEXT_CMD = 0x8 ) - * @id_and_color: ID and color of the relevant Binding - * @action: action to perform, one of FW_CTXT_ACTION_* - * @apply_time: 0 means immediate apply and context switch. - * other value means apply new params after X usecs - * @tx_param_color: ??? - * @ci: channel info - * @txchain_info: ??? - * @rxchain_info: ??? - * @acquisition_data: ??? - * @dsp_cfg_flags: set to 0 - */ -struct iwl_phy_context_cmd { - /* COMMON_INDEX_HDR_API_S_VER_1 */ - __le32 id_and_color; - __le32 action; - /* PHY_CONTEXT_DATA_API_S_VER_1 */ - __le32 apply_time; - __le32 tx_param_color; - struct iwl_fw_channel_info ci; - __le32 txchain_info; - __le32 rxchain_info; - __le32 acquisition_data; - __le32 dsp_cfg_flags; -} __packed; /* PHY_CONTEXT_CMD_API_VER_1 */ - -/* - * Aux ROC command - * - * Command requests the firmware to create a time event for a certain duration - * and remain on the given channel. This is done by using the Aux framework in - * the FW. - * The command was first used for Hot Spot issues - but can be used regardless - * to Hot Spot. - * - * ( HOT_SPOT_CMD 0x53 ) - * - * @id_and_color: ID and color of the MAC - * @action: action to perform, one of FW_CTXT_ACTION_* - * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the - * event_unique_id should be the id of the time event assigned by ucode. - * Otherwise ignore the event_unique_id. - * @sta_id_and_color: station id and color, resumed during "Remain On Channel" - * activity. - * @channel_info: channel info - * @node_addr: Our MAC Address - * @reserved: reserved for alignment - * @apply_time: GP2 value to start (should always be the current GP2 value) - * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max - * time by which start of the event is allowed to be postponed. - * @duration: event duration in TU To calculate event duration: - * timeEventDuration = min(duration, remainingQuota) - */ -struct iwl_hs20_roc_req { - /* COMMON_INDEX_HDR_API_S_VER_1 hdr */ - __le32 id_and_color; - __le32 action; - __le32 event_unique_id; - __le32 sta_id_and_color; - struct iwl_fw_channel_info channel_info; - u8 node_addr[ETH_ALEN]; - __le16 reserved; - __le32 apply_time; - __le32 apply_time_max_delay; - __le32 duration; -} __packed; /* HOT_SPOT_CMD_API_S_VER_1 */ - -/* - * values for AUX ROC result values - */ -enum iwl_mvm_hot_spot { - HOT_SPOT_RSP_STATUS_OK, - HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS, - HOT_SPOT_MAX_NUM_OF_SESSIONS, -}; - -/* - * Aux ROC command response - * - * In response to iwl_hs20_roc_req the FW sends this command to notify the - * driver the uid of the timevent. - * - * ( HOT_SPOT_CMD 0x53 ) - * - * @event_unique_id: Unique ID of time event assigned by ucode - * @status: Return status 0 is success, all the rest used for specific errors - */ -struct iwl_hs20_roc_res { - __le32 event_unique_id; - __le32 status; -} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */ - -/** - * struct iwl_radio_version_notif - information on the radio version - * ( RADIO_VERSION_NOTIFICATION = 0x68 ) - * @radio_flavor: radio flavor - * @radio_step: radio version step - * @radio_dash: radio version dash - */ -struct iwl_radio_version_notif { - __le32 radio_flavor; - __le32 radio_step; - __le32 radio_dash; -} __packed; /* RADIO_VERSION_NOTOFICATION_S_VER_1 */ - -enum iwl_card_state_flags { - CARD_ENABLED = 0x00, - HW_CARD_DISABLED = 0x01, - SW_CARD_DISABLED = 0x02, - CT_KILL_CARD_DISABLED = 0x04, - HALT_CARD_DISABLED = 0x08, - CARD_DISABLED_MSK = 0x0f, - CARD_IS_RX_ON = 0x10, -}; - -/** - * struct iwl_radio_version_notif - information on the radio version - * ( CARD_STATE_NOTIFICATION = 0xa1 ) - * @flags: %iwl_card_state_flags - */ -struct iwl_card_state_notif { - __le32 flags; -} __packed; /* CARD_STATE_NTFY_API_S_VER_1 */ - -/** - * struct iwl_missed_beacons_notif - information on missed beacons - * ( MISSED_BEACONS_NOTIFICATION = 0xa2 ) - * @mac_id: interface ID - * @consec_missed_beacons_since_last_rx: number of consecutive missed - * beacons since last RX. - * @consec_missed_beacons: number of consecutive missed beacons - * @num_expected_beacons: number of expected beacons - * @num_recvd_beacons: number of received beacons - */ -struct iwl_missed_beacons_notif { - __le32 mac_id; - __le32 consec_missed_beacons_since_last_rx; - __le32 consec_missed_beacons; - __le32 num_expected_beacons; - __le32 num_recvd_beacons; -} __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */ - -/** - * struct iwl_mfuart_load_notif - mfuart image version & status - * ( MFUART_LOAD_NOTIFICATION = 0xb1 ) - * @installed_ver: installed image version - * @external_ver: external image version - * @status: MFUART loading status - * @duration: MFUART loading time - * @image_size: MFUART image size in bytes -*/ -struct iwl_mfuart_load_notif { - __le32 installed_ver; - __le32 external_ver; - __le32 status; - __le32 duration; - /* image size valid only in v2 of the command */ - __le32 image_size; -} __packed; /*MFU_LOADER_NTFY_API_S_VER_2*/ - -/** - * struct iwl_mfu_assert_dump_notif - mfuart dump logs - * ( MFU_ASSERT_DUMP_NTF = 0xfe ) - * @assert_id: mfuart assert id that cause the notif - * @curr_reset_num: number of asserts since uptime - * @index_num: current chunk id - * @parts_num: total number of chunks - * @data_size: number of data bytes sent - * @data: data buffer - */ -struct iwl_mfu_assert_dump_notif { - __le32 assert_id; - __le32 curr_reset_num; - __le16 index_num; - __le16 parts_num; - __le32 data_size; - __le32 data[0]; -} __packed; /*MFU_DUMP_ASSERT_API_S_VER_1*/ - -#define MAX_PORT_ID_NUM 2 -#define MAX_MCAST_FILTERING_ADDRESSES 256 - -/** - * struct iwl_mcast_filter_cmd - configure multicast filter. - * @filter_own: Set 1 to filter out multicast packets sent by station itself - * @port_id: Multicast MAC addresses array specifier. This is a strange way - * to identify network interface adopted in host-device IF. - * It is used by FW as index in array of addresses. This array has - * MAX_PORT_ID_NUM members. - * @count: Number of MAC addresses in the array - * @pass_all: Set 1 to pass all multicast packets. - * @bssid: current association BSSID. - * @reserved: reserved - * @addr_list: Place holder for array of MAC addresses. - * IMPORTANT: add padding if necessary to ensure DWORD alignment. - */ -struct iwl_mcast_filter_cmd { - u8 filter_own; - u8 port_id; - u8 count; - u8 pass_all; - u8 bssid[6]; - u8 reserved[2]; - u8 addr_list[0]; -} __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */ - -#define MAX_BCAST_FILTERS 8 -#define MAX_BCAST_FILTER_ATTRS 2 - -/** - * enum iwl_mvm_bcast_filter_attr_offset - written by fw for each Rx packet - * @BCAST_FILTER_OFFSET_PAYLOAD_START: offset is from payload start. - * @BCAST_FILTER_OFFSET_IP_END: offset is from ip header end (i.e. - * start of ip payload). - */ -enum iwl_mvm_bcast_filter_attr_offset { - BCAST_FILTER_OFFSET_PAYLOAD_START = 0, - BCAST_FILTER_OFFSET_IP_END = 1, -}; - -/** - * struct iwl_fw_bcast_filter_attr - broadcast filter attribute - * @offset_type: &enum iwl_mvm_bcast_filter_attr_offset. - * @offset: starting offset of this pattern. - * @reserved1: reserved - * @val: value to match - big endian (MSB is the first - * byte to match from offset pos). - * @mask: mask to match (big endian). - */ -struct iwl_fw_bcast_filter_attr { - u8 offset_type; - u8 offset; - __le16 reserved1; - __be32 val; - __be32 mask; -} __packed; /* BCAST_FILTER_ATT_S_VER_1 */ - -/** - * enum iwl_mvm_bcast_filter_frame_type - filter frame type - * @BCAST_FILTER_FRAME_TYPE_ALL: consider all frames. - * @BCAST_FILTER_FRAME_TYPE_IPV4: consider only ipv4 frames - */ -enum iwl_mvm_bcast_filter_frame_type { - BCAST_FILTER_FRAME_TYPE_ALL = 0, - BCAST_FILTER_FRAME_TYPE_IPV4 = 1, -}; - -/** - * struct iwl_fw_bcast_filter - broadcast filter - * @discard: discard frame (1) or let it pass (0). - * @frame_type: &enum iwl_mvm_bcast_filter_frame_type. - * @reserved1: reserved - * @num_attrs: number of valid attributes in this filter. - * @attrs: attributes of this filter. a filter is considered matched - * only when all its attributes are matched (i.e. AND relationship) - */ -struct iwl_fw_bcast_filter { - u8 discard; - u8 frame_type; - u8 num_attrs; - u8 reserved1; - struct iwl_fw_bcast_filter_attr attrs[MAX_BCAST_FILTER_ATTRS]; -} __packed; /* BCAST_FILTER_S_VER_1 */ - -#define BA_WINDOW_STREAMS_MAX 16 -#define BA_WINDOW_STATUS_TID_MSK 0x000F -#define BA_WINDOW_STATUS_STA_ID_POS 4 -#define BA_WINDOW_STATUS_STA_ID_MSK 0x01F0 -#define BA_WINDOW_STATUS_VALID_MSK BIT(9) - -/** - * struct iwl_ba_window_status_notif - reordering window's status notification - * @bitmap: bitmap of received frames [start_seq_num + 0]..[start_seq_num + 63] - * @ra_tid: bit 3:0 - TID, bit 8:4 - STA_ID, bit 9 - valid - * @start_seq_num: the start sequence number of the bitmap - * @mpdu_rx_count: the number of received MPDUs since entering D0i3 - */ -struct iwl_ba_window_status_notif { - __le64 bitmap[BA_WINDOW_STREAMS_MAX]; - __le16 ra_tid[BA_WINDOW_STREAMS_MAX]; - __le32 start_seq_num[BA_WINDOW_STREAMS_MAX]; - __le16 mpdu_rx_count[BA_WINDOW_STREAMS_MAX]; -} __packed; /* BA_WINDOW_STATUS_NTFY_API_S_VER_1 */ - -/** - * struct iwl_fw_bcast_mac - per-mac broadcast filtering configuration. - * @default_discard: default action for this mac (discard (1) / pass (0)). - * @reserved1: reserved - * @attached_filters: bitmap of relevant filters for this mac. - */ -struct iwl_fw_bcast_mac { - u8 default_discard; - u8 reserved1; - __le16 attached_filters; -} __packed; /* BCAST_MAC_CONTEXT_S_VER_1 */ - -/** - * struct iwl_bcast_filter_cmd - broadcast filtering configuration - * @disable: enable (0) / disable (1) - * @max_bcast_filters: max number of filters (MAX_BCAST_FILTERS) - * @max_macs: max number of macs (NUM_MAC_INDEX_DRIVER) - * @reserved1: reserved - * @filters: broadcast filters - * @macs: broadcast filtering configuration per-mac - */ -struct iwl_bcast_filter_cmd { - u8 disable; - u8 max_bcast_filters; - u8 max_macs; - u8 reserved1; - struct iwl_fw_bcast_filter filters[MAX_BCAST_FILTERS]; - struct iwl_fw_bcast_mac macs[NUM_MAC_INDEX_DRIVER]; -} __packed; /* BCAST_FILTERING_HCMD_API_S_VER_1 */ - -/* - * enum iwl_mvm_marker_id - maker ids - * - * The ids for different type of markers to insert into the usniffer logs - */ -enum iwl_mvm_marker_id { - MARKER_ID_TX_FRAME_LATENCY = 1, -}; /* MARKER_ID_API_E_VER_1 */ - -/** - * struct iwl_mvm_marker - mark info into the usniffer logs - * - * (MARKER_CMD = 0xcb) - * - * Mark the UTC time stamp into the usniffer logs together with additional - * metadata, so the usniffer output can be parsed. - * In the command response the ucode will return the GP2 time. - * - * @dw_len: The amount of dwords following this byte including this byte. - * @marker_id: A unique marker id (iwl_mvm_marker_id). - * @reserved: reserved. - * @timestamp: in milliseconds since 1970-01-01 00:00:00 UTC - * @metadata: additional meta data that will be written to the unsiffer log - */ -struct iwl_mvm_marker { - u8 dw_len; - u8 marker_id; - __le16 reserved; - __le64 timestamp; - __le32 metadata[0]; -} __packed; /* MARKER_API_S_VER_1 */ - -/* - * enum iwl_dc2dc_config_id - flag ids - * - * Ids of dc2dc configuration flags - */ -enum iwl_dc2dc_config_id { - DCDC_LOW_POWER_MODE_MSK_SET = 0x1, /* not used */ - DCDC_FREQ_TUNE_SET = 0x2, -}; /* MARKER_ID_API_E_VER_1 */ - -/** - * struct iwl_dc2dc_config_cmd - configure dc2dc values - * - * (DC2DC_CONFIG_CMD = 0x83) - * - * Set/Get & configure dc2dc values. - * The command always returns the current dc2dc values. - * - * @flags: set/get dc2dc - * @enable_low_power_mode: not used. - * @dc2dc_freq_tune0: frequency divider - digital domain - * @dc2dc_freq_tune1: frequency divider - analog domain - */ -struct iwl_dc2dc_config_cmd { - __le32 flags; - __le32 enable_low_power_mode; /* not used */ - __le32 dc2dc_freq_tune0; - __le32 dc2dc_freq_tune1; -} __packed; /* DC2DC_CONFIG_CMD_API_S_VER_1 */ - -/** - * struct iwl_dc2dc_config_resp - response for iwl_dc2dc_config_cmd - * - * Current dc2dc values returned by the FW. - * - * @dc2dc_freq_tune0: frequency divider - digital domain - * @dc2dc_freq_tune1: frequency divider - analog domain - */ -struct iwl_dc2dc_config_resp { - __le32 dc2dc_freq_tune0; - __le32 dc2dc_freq_tune1; -} __packed; /* DC2DC_CONFIG_RESP_API_S_VER_1 */ - -/*********************************** - * Smart Fifo API - ***********************************/ -/* Smart Fifo state */ -enum iwl_sf_state { - SF_LONG_DELAY_ON = 0, /* should never be called by driver */ - SF_FULL_ON, - SF_UNINIT, - SF_INIT_OFF, - SF_HW_NUM_STATES -}; - -/* Smart Fifo possible scenario */ -enum iwl_sf_scenario { - SF_SCENARIO_SINGLE_UNICAST, - SF_SCENARIO_AGG_UNICAST, - SF_SCENARIO_MULTICAST, - SF_SCENARIO_BA_RESP, - SF_SCENARIO_TX_RESP, - SF_NUM_SCENARIO -}; - -#define SF_TRANSIENT_STATES_NUMBER 2 /* SF_LONG_DELAY_ON and SF_FULL_ON */ -#define SF_NUM_TIMEOUT_TYPES 2 /* Aging timer and Idle timer */ - -/* smart FIFO default values */ -#define SF_W_MARK_SISO 6144 -#define SF_W_MARK_MIMO2 8192 -#define SF_W_MARK_MIMO3 6144 -#define SF_W_MARK_LEGACY 4096 -#define SF_W_MARK_SCAN 4096 - -/* SF Scenarios timers for default configuration (aligned to 32 uSec) */ -#define SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ -#define SF_SINGLE_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ -#define SF_AGG_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ -#define SF_AGG_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ -#define SF_MCAST_IDLE_TIMER_DEF 160 /* 150 mSec */ -#define SF_MCAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ -#define SF_BA_IDLE_TIMER_DEF 160 /* 150 uSec */ -#define SF_BA_AGING_TIMER_DEF 400 /* 0.4 mSec */ -#define SF_TX_RE_IDLE_TIMER_DEF 160 /* 150 uSec */ -#define SF_TX_RE_AGING_TIMER_DEF 400 /* 0.4 mSec */ - -/* SF Scenarios timers for BSS MAC configuration (aligned to 32 uSec) */ -#define SF_SINGLE_UNICAST_IDLE_TIMER 320 /* 300 uSec */ -#define SF_SINGLE_UNICAST_AGING_TIMER 2016 /* 2 mSec */ -#define SF_AGG_UNICAST_IDLE_TIMER 320 /* 300 uSec */ -#define SF_AGG_UNICAST_AGING_TIMER 2016 /* 2 mSec */ -#define SF_MCAST_IDLE_TIMER 2016 /* 2 mSec */ -#define SF_MCAST_AGING_TIMER 10016 /* 10 mSec */ -#define SF_BA_IDLE_TIMER 320 /* 300 uSec */ -#define SF_BA_AGING_TIMER 2016 /* 2 mSec */ -#define SF_TX_RE_IDLE_TIMER 320 /* 300 uSec */ -#define SF_TX_RE_AGING_TIMER 2016 /* 2 mSec */ - -#define SF_LONG_DELAY_AGING_TIMER 1000000 /* 1 Sec */ - -#define SF_CFG_DUMMY_NOTIF_OFF BIT(16) - -/** - * struct iwl_sf_cfg_cmd - Smart Fifo configuration command. - * @state: smart fifo state, types listed in &enum iwl_sf_state. - * @watermark: Minimum allowed availabe free space in RXF for transient state. - * @long_delay_timeouts: aging and idle timer values for each scenario - * in long delay state. - * @full_on_timeouts: timer values for each scenario in full on state. - */ -struct iwl_sf_cfg_cmd { - __le32 state; - __le32 watermark[SF_TRANSIENT_STATES_NUMBER]; - __le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES]; - __le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES]; -} __packed; /* SF_CFG_API_S_VER_2 */ - -/*********************************** - * Location Aware Regulatory (LAR) API - MCC updates - ***********************************/ - -/** - * struct iwl_mcc_update_cmd_v1 - Request the device to update geographic - * regulatory profile according to the given MCC (Mobile Country Code). - * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. - * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the - * MCC in the cmd response will be the relevant MCC in the NVM. - * @mcc: given mobile country code - * @source_id: the source from where we got the MCC, see iwl_mcc_source - * @reserved: reserved for alignment - */ -struct iwl_mcc_update_cmd_v1 { - __le16 mcc; - u8 source_id; - u8 reserved; -} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_1 */ - -/** - * struct iwl_mcc_update_cmd - Request the device to update geographic - * regulatory profile according to the given MCC (Mobile Country Code). - * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. - * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the - * MCC in the cmd response will be the relevant MCC in the NVM. - * @mcc: given mobile country code - * @source_id: the source from where we got the MCC, see iwl_mcc_source - * @reserved: reserved for alignment - * @key: integrity key for MCC API OEM testing - * @reserved2: reserved - */ -struct iwl_mcc_update_cmd { - __le16 mcc; - u8 source_id; - u8 reserved; - __le32 key; - u8 reserved2[20]; -} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */ - -/** - * struct iwl_mcc_update_resp_v1 - response to MCC_UPDATE_CMD. - * Contains the new channel control profile map, if changed, and the new MCC - * (mobile country code). - * The new MCC may be different than what was requested in MCC_UPDATE_CMD. - * @status: see &enum iwl_mcc_update_status - * @mcc: the new applied MCC - * @cap: capabilities for all channels which matches the MCC - * @source_id: the MCC source, see iwl_mcc_source - * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51 - * channels, depending on platform) - * @channels: channel control data map, DWORD for each channel. Only the first - * 16bits are used. - */ -struct iwl_mcc_update_resp_v1 { - __le32 status; - __le16 mcc; - u8 cap; - u8 source_id; - __le32 n_channels; - __le32 channels[0]; -} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */ - -/** - * struct iwl_mcc_update_resp - response to MCC_UPDATE_CMD. - * Contains the new channel control profile map, if changed, and the new MCC - * (mobile country code). - * The new MCC may be different than what was requested in MCC_UPDATE_CMD. - * @status: see &enum iwl_mcc_update_status - * @mcc: the new applied MCC - * @cap: capabilities for all channels which matches the MCC - * @source_id: the MCC source, see iwl_mcc_source - * @time: time elapsed from the MCC test start (in 30 seconds TU) - * @reserved: reserved. - * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51 - * channels, depending on platform) - * @channels: channel control data map, DWORD for each channel. Only the first - * 16bits are used. - */ -struct iwl_mcc_update_resp { - __le32 status; - __le16 mcc; - u8 cap; - u8 source_id; - __le16 time; - __le16 reserved; - __le32 n_channels; - __le32 channels[0]; -} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_2 */ - -/** - * struct iwl_mcc_chub_notif - chub notifies of mcc change - * (MCC_CHUB_UPDATE_CMD = 0xc9) - * The Chub (Communication Hub, CommsHUB) is a HW component that connects to - * the cellular and connectivity cores that gets updates of the mcc, and - * notifies the ucode directly of any mcc change. - * The ucode requests the driver to request the device to update geographic - * regulatory profile according to the given MCC (Mobile Country Code). - * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. - * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the - * MCC in the cmd response will be the relevant MCC in the NVM. - * @mcc: given mobile country code - * @source_id: identity of the change originator, see iwl_mcc_source - * @reserved1: reserved for alignment - */ -struct iwl_mcc_chub_notif { - __le16 mcc; - u8 source_id; - u8 reserved1; -} __packed; /* LAR_MCC_NOTIFY_S */ - -enum iwl_mcc_update_status { - MCC_RESP_NEW_CHAN_PROFILE, - MCC_RESP_SAME_CHAN_PROFILE, - MCC_RESP_INVALID, - MCC_RESP_NVM_DISABLED, - MCC_RESP_ILLEGAL, - MCC_RESP_LOW_PRIORITY, - MCC_RESP_TEST_MODE_ACTIVE, - MCC_RESP_TEST_MODE_NOT_ACTIVE, - MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE, -}; - -enum iwl_mcc_source { - MCC_SOURCE_OLD_FW = 0, - MCC_SOURCE_ME = 1, - MCC_SOURCE_BIOS = 2, - MCC_SOURCE_3G_LTE_HOST = 3, - MCC_SOURCE_3G_LTE_DEVICE = 4, - MCC_SOURCE_WIFI = 5, - MCC_SOURCE_RESERVED = 6, - MCC_SOURCE_DEFAULT = 7, - MCC_SOURCE_UNINITIALIZED = 8, - MCC_SOURCE_MCC_API = 9, - MCC_SOURCE_GET_CURRENT = 0x10, - MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11, -}; - -/* DTS measurements */ - -enum iwl_dts_measurement_flags { - DTS_TRIGGER_CMD_FLAGS_TEMP = BIT(0), - DTS_TRIGGER_CMD_FLAGS_VOLT = BIT(1), -}; - -/** - * struct iwl_dts_measurement_cmd - request DTS temp and/or voltage measurements - * - * @flags: indicates which measurements we want as specified in - * &enum iwl_dts_measurement_flags - */ -struct iwl_dts_measurement_cmd { - __le32 flags; -} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */ - -/** -* enum iwl_dts_control_measurement_mode - DTS measurement type -* @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read -* back (latest value. Not waiting for new value). Use automatic -* SW DTS configuration. -* @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings, -* trigger DTS reading and provide read back temperature read -* when available. -* @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read -* @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result, -* without measurement trigger. -*/ -enum iwl_dts_control_measurement_mode { - DTS_AUTOMATIC = 0, - DTS_REQUEST_READ = 1, - DTS_OVER_WRITE = 2, - DTS_DIRECT_WITHOUT_MEASURE = 3, -}; - -/** -* enum iwl_dts_used - DTS to use or used for measurement in the DTS request -* @DTS_USE_TOP: Top -* @DTS_USE_CHAIN_A: chain A -* @DTS_USE_CHAIN_B: chain B -* @DTS_USE_CHAIN_C: chain C -* @XTAL_TEMPERATURE: read temperature from xtal -*/ -enum iwl_dts_used { - DTS_USE_TOP = 0, - DTS_USE_CHAIN_A = 1, - DTS_USE_CHAIN_B = 2, - DTS_USE_CHAIN_C = 3, - XTAL_TEMPERATURE = 4, -}; - -/** -* enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode -* @DTS_BIT6_MODE: bit 6 mode -* @DTS_BIT8_MODE: bit 8 mode -*/ -enum iwl_dts_bit_mode { - DTS_BIT6_MODE = 0, - DTS_BIT8_MODE = 1, -}; - -/** - * struct iwl_ext_dts_measurement_cmd - request extended DTS temp measurements - * @control_mode: see &enum iwl_dts_control_measurement_mode - * @temperature: used when over write DTS mode is selected - * @sensor: set temperature sensor to use. See &enum iwl_dts_used - * @avg_factor: average factor to DTS in request DTS read mode - * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode - * @step_duration: step duration for the DTS - */ -struct iwl_ext_dts_measurement_cmd { - __le32 control_mode; - __le32 temperature; - __le32 sensor; - __le32 avg_factor; - __le32 bit_mode; - __le32 step_duration; -} __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */ - -/** - * struct iwl_dts_measurement_notif_v1 - measurements notification - * - * @temp: the measured temperature - * @voltage: the measured voltage - */ -struct iwl_dts_measurement_notif_v1 { - __le32 temp; - __le32 voltage; -} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/ - -/** - * struct iwl_dts_measurement_notif_v2 - measurements notification - * - * @temp: the measured temperature - * @voltage: the measured voltage - * @threshold_idx: the trip index that was crossed - */ -struct iwl_dts_measurement_notif_v2 { - __le32 temp; - __le32 voltage; - __le32 threshold_idx; -} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */ - -/** - * struct ct_kill_notif - CT-kill entry notification - * - * @temperature: the current temperature in celsius - * @reserved: reserved - */ -struct ct_kill_notif { - __le16 temperature; - __le16 reserved; -} __packed; /* GRP_PHY_CT_KILL_NTF */ - -/** -* enum ctdp_cmd_operation - CTDP command operations -* @CTDP_CMD_OPERATION_START: update the current budget -* @CTDP_CMD_OPERATION_STOP: stop ctdp -* @CTDP_CMD_OPERATION_REPORT: get the average budget -*/ -enum iwl_mvm_ctdp_cmd_operation { - CTDP_CMD_OPERATION_START = 0x1, - CTDP_CMD_OPERATION_STOP = 0x2, - CTDP_CMD_OPERATION_REPORT = 0x4, -};/* CTDP_CMD_OPERATION_TYPE_E */ - -/** - * struct iwl_mvm_ctdp_cmd - track and manage the FW power consumption budget - * - * @operation: see &enum iwl_mvm_ctdp_cmd_operation - * @budget: the budget in milliwatt - * @window_size: defined in API but not used - */ -struct iwl_mvm_ctdp_cmd { - __le32 operation; - __le32 budget; - __le32 window_size; -} __packed; - -#define IWL_MAX_DTS_TRIPS 8 - -/** - * struct temp_report_ths_cmd - set temperature thresholds - * - * @num_temps: number of temperature thresholds passed - * @thresholds: array with the thresholds to be configured - */ -struct temp_report_ths_cmd { - __le32 num_temps; - __le16 thresholds[IWL_MAX_DTS_TRIPS]; -} __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */ - -/*********************************** - * TDLS API - ***********************************/ - -/* Type of TDLS request */ -enum iwl_tdls_channel_switch_type { - TDLS_SEND_CHAN_SW_REQ = 0, - TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH, - TDLS_MOVE_CH, -}; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */ - -/** - * struct iwl_tdls_channel_switch_timing - Switch timing in TDLS channel-switch - * @frame_timestamp: GP2 timestamp of channel-switch request/response packet - * received from peer - * @max_offchan_duration: What amount of microseconds out of a DTIM is given - * to the TDLS off-channel communication. For instance if the DTIM is - * 200TU and the TDLS peer is to be given 25% of the time, the value - * given will be 50TU, or 50 * 1024 if translated into microseconds. - * @switch_time: switch time the peer sent in its channel switch timing IE - * @switch_timeout: switch timeout the peer sent in its channel switch timing IE - */ -struct iwl_tdls_channel_switch_timing { - __le32 frame_timestamp; /* GP2 time of peer packet Rx */ - __le32 max_offchan_duration; /* given in micro-seconds */ - __le32 switch_time; /* given in micro-seconds */ - __le32 switch_timeout; /* given in micro-seconds */ -} __packed; /* TDLS_STA_CHANNEL_SWITCH_TIMING_DATA_API_S_VER_1 */ - -#define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200 - -/** - * struct iwl_tdls_channel_switch_frame - TDLS channel switch frame template - * - * A template representing a TDLS channel-switch request or response frame - * - * @switch_time_offset: offset to the channel switch timing IE in the template - * @tx_cmd: Tx parameters for the frame - * @data: frame data - */ -struct iwl_tdls_channel_switch_frame { - __le32 switch_time_offset; - struct iwl_tx_cmd tx_cmd; - u8 data[IWL_TDLS_CH_SW_FRAME_MAX_SIZE]; -} __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */ - -/** - * struct iwl_tdls_channel_switch_cmd - TDLS channel switch command - * - * The command is sent to initiate a channel switch and also in response to - * incoming TDLS channel-switch request/response packets from remote peers. - * - * @switch_type: see &enum iwl_tdls_channel_switch_type - * @peer_sta_id: station id of TDLS peer - * @ci: channel we switch to - * @timing: timing related data for command - * @frame: channel-switch request/response template, depending to switch_type - */ -struct iwl_tdls_channel_switch_cmd { - u8 switch_type; - __le32 peer_sta_id; - struct iwl_fw_channel_info ci; - struct iwl_tdls_channel_switch_timing timing; - struct iwl_tdls_channel_switch_frame frame; -} __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */ - -/** - * struct iwl_tdls_channel_switch_notif - TDLS channel switch start notification - * - * @status: non-zero on success - * @offchannel_duration: duration given in microseconds - * @sta_id: peer currently performing the channel-switch with - */ -struct iwl_tdls_channel_switch_notif { - __le32 status; - __le32 offchannel_duration; - __le32 sta_id; -} __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */ - -/** - * struct iwl_tdls_sta_info - TDLS station info - * - * @sta_id: station id of the TDLS peer - * @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx - * @tx_to_peer_ssn: initial SSN the FW should use for Tx on its TID vs the peer - * @is_initiator: 1 if the peer is the TDLS link initiator, 0 otherwise - */ -struct iwl_tdls_sta_info { - u8 sta_id; - u8 tx_to_peer_tid; - __le16 tx_to_peer_ssn; - __le32 is_initiator; -} __packed; /* TDLS_STA_INFO_VER_1 */ - -/** - * struct iwl_tdls_config_cmd - TDLS basic config command - * - * @id_and_color: MAC id and color being configured - * @tdls_peer_count: amount of currently connected TDLS peers - * @tx_to_ap_tid: TID reverved vs. the AP for FW based Tx - * @tx_to_ap_ssn: initial SSN the FW should use for Tx on its TID vs. the AP - * @sta_info: per-station info. Only the first tdls_peer_count entries are set - * @pti_req_data_offset: offset of network-level data for the PTI template - * @pti_req_tx_cmd: Tx parameters for PTI request template - * @pti_req_template: PTI request template data - */ -struct iwl_tdls_config_cmd { - __le32 id_and_color; /* mac id and color */ - u8 tdls_peer_count; - u8 tx_to_ap_tid; - __le16 tx_to_ap_ssn; - struct iwl_tdls_sta_info sta_info[IWL_MVM_TDLS_STA_COUNT]; - - __le32 pti_req_data_offset; - struct iwl_tx_cmd pti_req_tx_cmd; - u8 pti_req_template[0]; -} __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */ - -/** - * struct iwl_tdls_config_sta_info_res - TDLS per-station config information - * - * @sta_id: station id of the TDLS peer - * @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to - * the peer - */ -struct iwl_tdls_config_sta_info_res { - __le16 sta_id; - __le16 tx_to_peer_last_seq; -} __packed; /* TDLS_STA_INFO_RSP_VER_1 */ - -/** - * struct iwl_tdls_config_res - TDLS config information from FW - * - * @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP - * @sta_info: per-station TDLS config information - */ -struct iwl_tdls_config_res { - __le32 tx_to_ap_last_seq; - struct iwl_tdls_config_sta_info_res sta_info[IWL_MVM_TDLS_STA_COUNT]; -} __packed; /* TDLS_CONFIG_RSP_API_S_VER_1 */ - -/** - * struct iwl_mu_group_mgmt_cmd - VHT MU-MIMO group configuration - * - * @reserved: reserved - * @membership_status: a bitmap of MU groups - * @user_position:the position of station in a group. If the station is in the - * group then bits (group * 2) is the position -1 - */ -struct iwl_mu_group_mgmt_cmd { - __le32 reserved; - __le32 membership_status[2]; - __le32 user_position[4]; -} __packed; /* MU_GROUP_ID_MNG_TABLE_API_S_VER_1 */ - -/** - * struct iwl_mu_group_mgmt_notif - VHT MU-MIMO group id notification - * - * @membership_status: a bitmap of MU groups - * @user_position: the position of station in a group. If the station is in the - * group then bits (group * 2) is the position -1 - */ -struct iwl_mu_group_mgmt_notif { - __le32 membership_status[2]; - __le32 user_position[4]; -} __packed; /* MU_GROUP_MNG_NTFY_API_S_VER_1 */ - -#define MAX_STORED_BEACON_SIZE 600 - -/** - * struct iwl_stored_beacon_notif - Stored beacon notification - * - * @system_time: system time on air rise - * @tsf: TSF on air rise - * @beacon_timestamp: beacon on air rise - * @band: band, matches &RX_RES_PHY_FLAGS_BAND_24 definition - * @channel: channel this beacon was received on - * @rates: rate in ucode internal format - * @byte_count: frame's byte count - * @data: beacon data, length in @byte_count - */ -struct iwl_stored_beacon_notif { - __le32 system_time; - __le64 tsf; - __le32 beacon_timestamp; - __le16 band; - __le16 channel; - __le32 rates; - __le32 byte_count; - u8 data[MAX_STORED_BEACON_SIZE]; -} __packed; /* WOWLAN_STROED_BEACON_INFO_S_VER_2 */ - -#define LQM_NUMBER_OF_STATIONS_IN_REPORT 16 - -enum iwl_lqm_cmd_operatrions { - LQM_CMD_OPERATION_START_MEASUREMENT = 0x01, - LQM_CMD_OPERATION_STOP_MEASUREMENT = 0x02, -}; - -enum iwl_lqm_status { - LQM_STATUS_SUCCESS = 0, - LQM_STATUS_TIMEOUT = 1, - LQM_STATUS_ABORT = 2, -}; - -/** - * struct iwl_link_qual_msrmnt_cmd - Link Quality Measurement command - * @cmd_operation: command operation to be performed (start or stop) - * as defined above. - * @mac_id: MAC ID the measurement applies to. - * @measurement_time: time of the total measurement to be performed, in uSec. - * @timeout: maximum time allowed until a response is sent, in uSec. - */ -struct iwl_link_qual_msrmnt_cmd { - __le32 cmd_operation; - __le32 mac_id; - __le32 measurement_time; - __le32 timeout; -} __packed /* LQM_CMD_API_S_VER_1 */; - -/** - * struct iwl_link_qual_msrmnt_notif - Link Quality Measurement notification - * - * @frequent_stations_air_time: an array containing the total air time - * (in uSec) used by the most frequently transmitting stations. - * @number_of_stations: the number of uniqe stations included in the array - * (a number between 0 to 16) - * @total_air_time_other_stations: the total air time (uSec) used by all the - * stations which are not included in the above report. - * @time_in_measurement_window: the total time in uSec in which a measurement - * took place. - * @tx_frame_dropped: the number of TX frames dropped due to retry limit during - * measurement - * @mac_id: MAC ID the measurement applies to. - * @status: return status. may be one of the LQM_STATUS_* defined above. - * @reserved: reserved. - */ -struct iwl_link_qual_msrmnt_notif { - __le32 frequent_stations_air_time[LQM_NUMBER_OF_STATIONS_IN_REPORT]; - __le32 number_of_stations; - __le32 total_air_time_other_stations; - __le32 time_in_measurement_window; - __le32 tx_frame_dropped; - __le32 mac_id; - __le32 status; - u8 reserved[12]; -} __packed; /* LQM_MEASUREMENT_COMPLETE_NTF_API_S_VER1 */ - -/** - * struct iwl_channel_switch_noa_notif - Channel switch NOA notification - * - * @id_and_color: ID and color of the MAC - */ -struct iwl_channel_switch_noa_notif { - __le32 id_and_color; -} __packed; /* CHANNEL_SWITCH_START_NTFY_API_S_VER_1 */ - -/* Operation types for the debug mem access */ -enum { - DEBUG_MEM_OP_READ = 0, - DEBUG_MEM_OP_WRITE = 1, - DEBUG_MEM_OP_WRITE_BYTES = 2, -}; - -#define DEBUG_MEM_MAX_SIZE_DWORDS 32 - -/** - * struct iwl_dbg_mem_access_cmd - Request the device to read/write memory - * @op: DEBUG_MEM_OP_* - * @addr: address to read/write from/to - * @len: in dwords, to read/write - * @data: for write opeations, contains the source buffer - */ -struct iwl_dbg_mem_access_cmd { - __le32 op; - __le32 addr; - __le32 len; - __le32 data[]; -} __packed; /* DEBUG_(U|L)MAC_RD_WR_CMD_API_S_VER_1 */ - -/* Status responses for the debug mem access */ -enum { - DEBUG_MEM_STATUS_SUCCESS = 0x0, - DEBUG_MEM_STATUS_FAILED = 0x1, - DEBUG_MEM_STATUS_LOCKED = 0x2, - DEBUG_MEM_STATUS_HIDDEN = 0x3, - DEBUG_MEM_STATUS_LENGTH = 0x4, -}; - -/** - * struct iwl_dbg_mem_access_rsp - Response to debug mem commands - * @status: DEBUG_MEM_STATUS_* - * @len: read dwords (0 for write operations) - * @data: contains the read DWs - */ -struct iwl_dbg_mem_access_rsp { - __le32 status; - __le32 len; - __le32 data[]; -} __packed; /* DEBUG_(U|L)MAC_RD_WR_RSP_API_S_VER_1 */ - -/** - * struct iwl_nvm_access_complete_cmd - NVM_ACCESS commands are completed - * @reserved: reserved - */ -struct iwl_nvm_access_complete_cmd { - __le32 reserved; -} __packed; /* NVM_ACCESS_COMPLETE_CMD_API_S_VER_1 */ - -/** - * enum iwl_extended_cfg_flag - commands driver may send before - * finishing init flow - * @IWL_INIT_DEBUG_CFG: driver is going to send debug config command - * @IWL_INIT_NVM: driver is going to send NVM_ACCESS commands - * @IWL_INIT_PHY: driver is going to send PHY_DB commands - */ -enum iwl_extended_cfg_flags { - IWL_INIT_DEBUG_CFG, - IWL_INIT_NVM, - IWL_INIT_PHY, -}; - -/** - * struct iwl_extended_cfg_cmd - mark what commands ucode should wait for - * before finishing init flows - * @init_flags: values from iwl_extended_cfg_flags - */ -struct iwl_init_extended_cfg_cmd { - __le32 init_flags; -} __packed; /* INIT_EXTENDED_CFG_CMD_API_S_VER_1 */ - -/* - * struct iwl_nvm_get_info - request to get NVM data - */ -struct iwl_nvm_get_info { - __le32 reserved; -} __packed; /* GRP_REGULATORY_NVM_GET_INFO_CMD_S_VER_1 */ - -/** - * struct iwl_nvm_get_info_general - general NVM data - * @flags: 1 - empty, 0 - valid - * @nvm_version: nvm version - * @board_type: board type - * @reserved: reserved - */ -struct iwl_nvm_get_info_general { - __le32 flags; - __le16 nvm_version; - u8 board_type; - u8 reserved; -} __packed; /* GRP_REGULATORY_NVM_GET_INFO_GENERAL_S_VER_1 */ - -/** - * struct iwl_nvm_get_info_sku - mac information - * @enable_24g: band 2.4G enabled - * @enable_5g: band 5G enabled - * @enable_11n: 11n enabled - * @enable_11ac: 11ac enabled - * @mimo_disable: MIMO enabled - * @ext_crypto: Extended crypto enabled - */ -struct iwl_nvm_get_info_sku { - __le32 enable_24g; - __le32 enable_5g; - __le32 enable_11n; - __le32 enable_11ac; - __le32 mimo_disable; - __le32 ext_crypto; -} __packed; /* GRP_REGULATORY_NVM_GET_INFO_MAC_SKU_SECTION_S_VER_1 */ - -/** - * struct iwl_nvm_get_info_phy - phy information - * @tx_chains: BIT 0 chain A, BIT 1 chain B - * @rx_chains: BIT 0 chain A, BIT 1 chain B - */ -struct iwl_nvm_get_info_phy { - __le32 tx_chains; - __le32 rx_chains; -} __packed; /* GRP_REGULATORY_NVM_GET_INFO_PHY_SKU_SECTION_S_VER_1 */ - -#define IWL_NUM_CHANNELS (51) - -/** - * struct iwl_nvm_get_info_regulatory - regulatory information - * @lar_enabled: is LAR enabled - * @channel_profile: regulatory data of this channel - * @reserved: reserved - */ -struct iwl_nvm_get_info_regulatory { - __le32 lar_enabled; - __le16 channel_profile[IWL_NUM_CHANNELS]; - __le16 reserved; -} __packed; /* GRP_REGULATORY_NVM_GET_INFO_REGULATORY_S_VER_1 */ - -/** - * struct iwl_nvm_get_info_rsp - response to get NVM data - * @general: general NVM data - * @mac_sku: data relating to MAC sku - * @phy_sku: data relating to PHY sku - * @regulatory: regulatory data - */ -struct iwl_nvm_get_info_rsp { - struct iwl_nvm_get_info_general general; - struct iwl_nvm_get_info_sku mac_sku; - struct iwl_nvm_get_info_phy phy_sku; - struct iwl_nvm_get_info_regulatory regulatory; -} __packed; /* GRP_REGULATORY_NVM_GET_INFO_CMD_RSP_S_VER_1 */ - -/** - * struct iwl_mvm_antenna_coupling_notif - antenna coupling notification - * @isolation: antenna isolation value - */ -struct iwl_mvm_antenna_coupling_notif { - __le32 isolation; -} __packed; +#include "fw/api/tdls.h" +#include "fw/api/mac-cfg.h" +#include "fw/api/offload.h" +#include "fw/api/context.h" +#include "fw/api/time-event.h" +#include "fw/api/datapath.h" +#include "fw/api/phy.h" +#include "fw/api/config.h" +#include "fw/api/alive.h" +#include "fw/api/binding.h" +#include "fw/api/cmdhdr.h" +#include "fw/api/coex.h" +#include "fw/api/commands.h" +#include "fw/api/d3.h" +#include "fw/api/filter.h" +#include "fw/api/mac.h" +#include "fw/api/nvm-reg.h" +#include "fw/api/phy-ctxt.h" +#include "fw/api/power.h" +#include "fw/api/rs.h" +#include "fw/api/rx.h" +#include "fw/api/scan.h" +#include "fw/api/sf.h" +#include "fw/api/sta.h" +#include "fw/api/stats.h" +#include "fw/api/tof.h" +#include "fw/api/tx.h" #endif /* __fw_api_h__ */ |