Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

1 files changed, 397 insertions, 0 deletions

diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
new file mode 100644
index 000000000000..7689569cd82f
--- /dev/null
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -0,0 +1,397 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
+ * All rights reserved.
+ */
+
+#ifndef WILC_WLAN_H
+#define WILC_WLAN_H
+
+#include <linux/types.h>
+#include <linux/bitfield.h>
+
+/********************************************
+ *
+ *      Mac eth header length
+ *
+ ********************************************/
+#define MAX_MAC_HDR_LEN			26 /* QOS_MAC_HDR_LEN */
+#define SUB_MSDU_HEADER_LENGTH		14
+#define SNAP_HDR_LEN			8
+#define ETHERNET_HDR_LEN		14
+#define WORD_ALIGNMENT_PAD		0
+
+#define ETH_ETHERNET_HDR_OFFSET		(MAX_MAC_HDR_LEN + \
+					 SUB_MSDU_HEADER_LENGTH + \
+					 SNAP_HDR_LEN - \
+					 ETHERNET_HDR_LEN + \
+					 WORD_ALIGNMENT_PAD)
+
+#define HOST_HDR_OFFSET			4
+#define ETHERNET_HDR_LEN		14
+#define IP_HDR_LEN			20
+#define IP_HDR_OFFSET			ETHERNET_HDR_LEN
+#define UDP_HDR_OFFSET			(IP_HDR_LEN + IP_HDR_OFFSET)
+#define UDP_HDR_LEN			8
+#define UDP_DATA_OFFSET			(UDP_HDR_OFFSET + UDP_HDR_LEN)
+#define ETH_CONFIG_PKT_HDR_LEN		UDP_DATA_OFFSET
+
+#define ETH_CONFIG_PKT_HDR_OFFSET	(ETH_ETHERNET_HDR_OFFSET + \
+					 ETH_CONFIG_PKT_HDR_LEN)
+
+/********************************************
+ *
+ *      Register Defines
+ *
+ ********************************************/
+#define WILC_PERIPH_REG_BASE		0x1000
+#define WILC_CHANGING_VIR_IF		0x108c
+#define WILC_CHIPID			WILC_PERIPH_REG_BASE
+#define WILC_GLB_RESET_0		(WILC_PERIPH_REG_BASE + 0x400)
+#define WILC_PIN_MUX_0			(WILC_PERIPH_REG_BASE + 0x408)
+#define WILC_HOST_TX_CTRL		(WILC_PERIPH_REG_BASE + 0x6c)
+#define WILC_HOST_RX_CTRL_0		(WILC_PERIPH_REG_BASE + 0x70)
+#define WILC_HOST_RX_CTRL_1		(WILC_PERIPH_REG_BASE + 0x74)
+#define WILC_HOST_VMM_CTL		(WILC_PERIPH_REG_BASE + 0x78)
+#define WILC_HOST_RX_CTRL		(WILC_PERIPH_REG_BASE + 0x80)
+#define WILC_HOST_RX_EXTRA_SIZE		(WILC_PERIPH_REG_BASE + 0x84)
+#define WILC_HOST_TX_CTRL_1		(WILC_PERIPH_REG_BASE + 0x88)
+#define WILC_MISC			(WILC_PERIPH_REG_BASE + 0x428)
+#define WILC_INTR_REG_BASE		(WILC_PERIPH_REG_BASE + 0xa00)
+#define WILC_INTR_ENABLE		WILC_INTR_REG_BASE
+#define WILC_INTR2_ENABLE		(WILC_INTR_REG_BASE + 4)
+
+#define WILC_INTR_POLARITY		(WILC_INTR_REG_BASE + 0x10)
+#define WILC_INTR_TYPE			(WILC_INTR_REG_BASE + 0x20)
+#define WILC_INTR_CLEAR			(WILC_INTR_REG_BASE + 0x30)
+#define WILC_INTR_STATUS		(WILC_INTR_REG_BASE + 0x40)
+
+#define WILC_RF_REVISION_ID		0x13f4
+
+#define WILC_VMM_TBL_SIZE		64
+#define WILC_VMM_TX_TBL_BASE		0x150400
+#define WILC_VMM_RX_TBL_BASE		0x150500
+
+#define WILC_VMM_BASE			0x150000
+#define WILC_VMM_CORE_CTL		WILC_VMM_BASE
+#define WILC_VMM_TBL_CTL		(WILC_VMM_BASE + 0x4)
+#define WILC_VMM_TBL_ENTRY		(WILC_VMM_BASE + 0x8)
+#define WILC_VMM_TBL0_SIZE		(WILC_VMM_BASE + 0xc)
+#define WILC_VMM_TO_HOST_SIZE		(WILC_VMM_BASE + 0x10)
+#define WILC_VMM_CORE_CFG		(WILC_VMM_BASE + 0x14)
+#define WILC_VMM_TBL_ACTIVE		(WILC_VMM_BASE + 040)
+#define WILC_VMM_TBL_STATUS		(WILC_VMM_BASE + 0x44)
+
+#define WILC_SPI_REG_BASE		0xe800
+#define WILC_SPI_CTL			WILC_SPI_REG_BASE
+#define WILC_SPI_MASTER_DMA_ADDR	(WILC_SPI_REG_BASE + 0x4)
+#define WILC_SPI_MASTER_DMA_COUNT	(WILC_SPI_REG_BASE + 0x8)
+#define WILC_SPI_SLAVE_DMA_ADDR		(WILC_SPI_REG_BASE + 0xc)
+#define WILC_SPI_SLAVE_DMA_COUNT	(WILC_SPI_REG_BASE + 0x10)
+#define WILC_SPI_TX_MODE		(WILC_SPI_REG_BASE + 0x20)
+#define WILC_SPI_PROTOCOL_CONFIG	(WILC_SPI_REG_BASE + 0x24)
+#define WILC_SPI_INTR_CTL		(WILC_SPI_REG_BASE + 0x2c)
+#define WILC_SPI_INT_STATUS		(WILC_SPI_REG_BASE + 0x40)
+#define WILC_SPI_INT_CLEAR		(WILC_SPI_REG_BASE + 0x44)
+
+#define WILC_SPI_WAKEUP_REG		0x1
+#define WILC_SPI_WAKEUP_BIT		BIT(1)
+
+#define WILC_SPI_PROTOCOL_OFFSET	(WILC_SPI_PROTOCOL_CONFIG - \
+					 WILC_SPI_REG_BASE)
+
+#define WILC_SPI_CLOCKLESS_ADDR_LIMIT	0x30
+
+/* Functions IO enables bits */
+#define WILC_SDIO_CCCR_IO_EN_FUNC1	BIT(1)
+
+/* Function/Interrupt enables bits */
+#define WILC_SDIO_CCCR_IEN_MASTER	BIT(0)
+#define WILC_SDIO_CCCR_IEN_FUNC1	BIT(1)
+
+/* Abort CCCR register bits */
+#define WILC_SDIO_CCCR_ABORT_RESET	BIT(3)
+
+/* Vendor specific CCCR registers */
+#define WILC_SDIO_WAKEUP_REG		0xf0
+#define WILC_SDIO_WAKEUP_BIT		BIT(0)
+
+#define WILC_SDIO_CLK_STATUS_REG	0xf1
+#define WILC_SDIO_CLK_STATUS_BIT	BIT(0)
+
+#define WILC_SDIO_INTERRUPT_DATA_SZ_REG	0xf2 /* Read size (2 bytes) */
+
+#define WILC_SDIO_VMM_TBL_CTRL_REG	0xf6
+#define WILC_SDIO_IRQ_FLAG_REG		0xf7
+#define WILC_SDIO_IRQ_CLEAR_FLAG_REG	0xf8
+
+#define WILC_SDIO_HOST_TO_FW_REG	0xfa
+#define WILC_SDIO_HOST_TO_FW_BIT	BIT(0)
+
+#define WILC_SDIO_FW_TO_HOST_REG	0xfc
+#define WILC_SDIO_FW_TO_HOST_BIT	BIT(0)
+
+/* Function 1 specific FBR register */
+#define WILC_SDIO_FBR_CSA_REG		0x10C /* CSA pointer (3 bytes) */
+#define WILC_SDIO_FBR_DATA_REG		0x10F
+
+#define WILC_SDIO_F1_DATA_REG		0x0
+#define WILC_SDIO_EXT_IRQ_FLAG_REG	0x4
+
+#define WILC_AHB_DATA_MEM_BASE		0x30000
+#define WILC_AHB_SHARE_MEM_BASE		0xd0000
+
+#define WILC_VMM_TBL_RX_SHADOW_BASE	WILC_AHB_SHARE_MEM_BASE
+#define WILC_VMM_TBL_RX_SHADOW_SIZE	256
+
+#define WILC_FW_HOST_COMM		0x13c0
+#define WILC_GP_REG_0			0x149c
+#define WILC_GP_REG_1			0x14a0
+
+#define WILC_HAVE_SDIO_IRQ_GPIO		BIT(0)
+#define WILC_HAVE_USE_PMU		BIT(1)
+#define WILC_HAVE_SLEEP_CLK_SRC_RTC	BIT(2)
+#define WILC_HAVE_SLEEP_CLK_SRC_XO	BIT(3)
+#define WILC_HAVE_EXT_PA_INV_TX_RX	BIT(4)
+#define WILC_HAVE_LEGACY_RF_SETTINGS	BIT(5)
+#define WILC_HAVE_XTAL_24		BIT(6)
+#define WILC_HAVE_DISABLE_WILC_UART	BIT(7)
+#define WILC_HAVE_USE_IRQ_AS_HOST_WAKE	BIT(8)
+
+#define WILC_CORTUS_INTERRUPT_BASE	0x10A8
+#define WILC_CORTUS_INTERRUPT_1		(WILC_CORTUS_INTERRUPT_BASE + 0x4)
+#define WILC_CORTUS_INTERRUPT_2		(WILC_CORTUS_INTERRUPT_BASE + 0x8)
+
+/* tx control register 1 to 4 for RX */
+#define WILC_REG_4_TO_1_RX		0x1e1c
+
+/* tx control register 1 to 4 for TX Bank_0 */
+#define WILC_REG_4_TO_1_TX_BANK0	0x1e9c
+
+#define WILC_CORTUS_RESET_MUX_SEL	0x1118
+#define WILC_CORTUS_BOOT_REGISTER	0xc0000
+
+#define WILC_CORTUS_BOOT_FROM_IRAM	0x71
+
+#define WILC_1000_BASE_ID		0x100000
+
+#define WILC_1000_BASE_ID_2A		0x1002A0
+#define WILC_1000_BASE_ID_2A_REV1	(WILC_1000_BASE_ID_2A + 1)
+
+#define WILC_1000_BASE_ID_2B		0x1002B0
+#define WILC_1000_BASE_ID_2B_REV1	(WILC_1000_BASE_ID_2B + 1)
+#define WILC_1000_BASE_ID_2B_REV2	(WILC_1000_BASE_ID_2B + 2)
+
+#define WILC_CHIP_REV_FIELD		GENMASK(11, 0)
+
+/********************************************
+ *
+ *      Wlan Defines
+ *
+ ********************************************/
+#define WILC_CFG_PKT		1
+#define WILC_NET_PKT		0
+#define WILC_MGMT_PKT		2
+
+#define WILC_CFG_SET		1
+#define WILC_CFG_QUERY		0
+
+#define WILC_CFG_RSP		1
+#define WILC_CFG_RSP_STATUS	2
+#define WILC_CFG_RSP_SCAN	3
+
+#define WILC_ABORT_REQ_BIT		BIT(31)
+
+#define WILC_RX_BUFF_SIZE	(96 * 1024)
+#define WILC_TX_BUFF_SIZE	(64 * 1024)
+
+#define MODALIAS		"WILC_SPI"
+
+#define WILC_PKT_HDR_CONFIG_FIELD	BIT(31)
+#define WILC_PKT_HDR_OFFSET_FIELD	GENMASK(30, 22)
+#define WILC_PKT_HDR_TOTAL_LEN_FIELD	GENMASK(21, 11)
+#define WILC_PKT_HDR_LEN_FIELD		GENMASK(10, 0)
+
+#define WILC_INTERRUPT_DATA_SIZE	GENMASK(14, 0)
+
+#define WILC_VMM_BUFFER_SIZE		GENMASK(9, 0)
+
+#define WILC_VMM_HDR_TYPE		BIT(31)
+#define WILC_VMM_HDR_MGMT_FIELD		BIT(30)
+#define WILC_VMM_HDR_PKT_SIZE		GENMASK(29, 15)
+#define WILC_VMM_HDR_BUFF_SIZE		GENMASK(14, 0)
+
+#define WILC_VMM_ENTRY_COUNT		GENMASK(8, 3)
+#define WILC_VMM_ENTRY_AVAILABLE	BIT(2)
+/*******************************************/
+/*        E0 and later Interrupt flags.    */
+/*******************************************/
+/*******************************************/
+/*        E0 and later Interrupt flags.    */
+/*           IRQ Status word               */
+/* 15:0 = DMA count in words.              */
+/* 16: INT0 flag                           */
+/* 17: INT1 flag                           */
+/* 18: INT2 flag                           */
+/* 19: INT3 flag                           */
+/* 20: INT4 flag                           */
+/* 21: INT5 flag                           */
+/*******************************************/
+#define IRG_FLAGS_OFFSET	16
+#define IRQ_DMA_WD_CNT_MASK	GENMASK(IRG_FLAGS_OFFSET - 1, 0)
+#define INT_0			BIT(IRG_FLAGS_OFFSET)
+#define INT_1			BIT(IRG_FLAGS_OFFSET + 1)
+#define INT_2			BIT(IRG_FLAGS_OFFSET + 2)
+#define INT_3			BIT(IRG_FLAGS_OFFSET + 3)
+#define INT_4			BIT(IRG_FLAGS_OFFSET + 4)
+#define INT_5			BIT(IRG_FLAGS_OFFSET + 5)
+#define MAX_NUM_INT		5
+#define IRG_FLAGS_MASK		GENMASK(IRG_FLAGS_OFFSET + MAX_NUM_INT, \
+					IRG_FLAGS_OFFSET)
+
+/*******************************************/
+/*        E0 and later Interrupt flags.    */
+/*           IRQ Clear word                */
+/* 0: Clear INT0                           */
+/* 1: Clear INT1                           */
+/* 2: Clear INT2                           */
+/* 3: Clear INT3                           */
+/* 4: Clear INT4                           */
+/* 5: Clear INT5                           */
+/* 6: Select VMM table 1                   */
+/* 7: Select VMM table 2                   */
+/* 8: Enable VMM                           */
+/*******************************************/
+#define CLR_INT0		BIT(0)
+#define CLR_INT1		BIT(1)
+#define CLR_INT2		BIT(2)
+#define CLR_INT3		BIT(3)
+#define CLR_INT4		BIT(4)
+#define CLR_INT5		BIT(5)
+#define SEL_VMM_TBL0		BIT(6)
+#define SEL_VMM_TBL1		BIT(7)
+#define EN_VMM			BIT(8)
+
+#define DATA_INT_EXT		INT_0
+#define ALL_INT_EXT		DATA_INT_EXT
+#define NUM_INT_EXT		1
+#define UNHANDLED_IRQ_MASK	GENMASK(MAX_NUM_INT - 1, NUM_INT_EXT)
+
+#define DATA_INT_CLR		CLR_INT0
+
+#define ENABLE_RX_VMM		(SEL_VMM_TBL1 | EN_VMM)
+#define ENABLE_TX_VMM		(SEL_VMM_TBL0 | EN_VMM)
+/* time for expiring the completion of cfg packets */
+#define WILC_CFG_PKTS_TIMEOUT	msecs_to_jiffies(2000)
+
+#define IS_MANAGMEMENT		0x100
+#define IS_MANAGMEMENT_CALLBACK	0x080
+#define IS_MGMT_STATUS_SUCCES	0x040
+
+#define WILC_WID_TYPE		GENMASK(15, 12)
+#define WILC_VMM_ENTRY_FULL_RETRY	1
+/********************************************
+ *
+ *      Tx/Rx Queue Structure
+ *
+ ********************************************/
+
+struct txq_entry_t {
+	struct list_head list;
+	int type;
+	int ack_idx;
+	u8 *buffer;
+	int buffer_size;
+	void *priv;
+	int status;
+	struct wilc_vif *vif;
+	void (*tx_complete_func)(void *priv, int status);
+};
+
+struct rxq_entry_t {
+	struct list_head list;
+	u8 *buffer;
+	int buffer_size;
+};
+
+/********************************************
+ *
+ *      Host IF Structure
+ *
+ ********************************************/
+struct wilc;
+struct wilc_hif_func {
+	int (*hif_init)(struct wilc *wilc, bool resume);
+	int (*hif_deinit)(struct wilc *wilc);
+	int (*hif_read_reg)(struct wilc *wilc, u32 addr, u32 *data);
+	int (*hif_write_reg)(struct wilc *wilc, u32 addr, u32 data);
+	int (*hif_block_rx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_block_tx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_read_int)(struct wilc *wilc, u32 *int_status);
+	int (*hif_clear_int_ext)(struct wilc *wilc, u32 val);
+	int (*hif_read_size)(struct wilc *wilc, u32 *size);
+	int (*hif_block_tx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_block_rx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_sync_ext)(struct wilc *wilc, int nint);
+	int (*enable_interrupt)(struct wilc *nic);
+	void (*disable_interrupt)(struct wilc *nic);
+};
+
+#define WILC_MAX_CFG_FRAME_SIZE		1468
+
+struct tx_complete_data {
+	int size;
+	void *buff;
+	struct sk_buff *skb;
+};
+
+struct wilc_cfg_cmd_hdr {
+	u8 cmd_type;
+	u8 seq_no;
+	__le16 total_len;
+	__le32 driver_handler;
+};
+
+struct wilc_cfg_frame {
+	struct wilc_cfg_cmd_hdr hdr;
+	u8 frame[WILC_MAX_CFG_FRAME_SIZE];
+};
+
+struct wilc_cfg_rsp {
+	u8 type;
+	u8 seq_no;
+};
+
+struct wilc;
+struct wilc_vif;
+
+int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
+				u32 buffer_size);
+int wilc_wlan_start(struct wilc *wilc);
+int wilc_wlan_stop(struct wilc *wilc, struct wilc_vif *vif);
+int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
+			      u32 buffer_size,
+			      void (*tx_complete_fn)(void *, int));
+int wilc_wlan_handle_txq(struct wilc *wl, u32 *txq_count);
+void wilc_handle_isr(struct wilc *wilc);
+void wilc_wlan_cleanup(struct net_device *dev);
+int wilc_wlan_cfg_set(struct wilc_vif *vif, int start, u16 wid, u8 *buffer,
+		      u32 buffer_size, int commit, u32 drv_handler);
+int wilc_wlan_cfg_get(struct wilc_vif *vif, int start, u16 wid, int commit,
+		      u32 drv_handler);
+int wilc_wlan_txq_add_mgmt_pkt(struct net_device *dev, void *priv, u8 *buffer,
+			       u32 buffer_size, void (*func)(void *, int));
+void wilc_enable_tcp_ack_filter(struct wilc_vif *vif, bool value);
+int wilc_wlan_get_num_conn_ifcs(struct wilc *wilc);
+netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *dev);
+
+void wilc_wfi_p2p_rx(struct wilc_vif *vif, u8 *buff, u32 size);
+void host_wakeup_notify(struct wilc *wilc);
+void host_sleep_notify(struct wilc *wilc);
+void chip_allow_sleep(struct wilc *wilc);
+void chip_wakeup(struct wilc *wilc);
+int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
+			 u32 count);
+int wilc_wlan_init(struct net_device *dev);
+u32 wilc_get_chipid(struct wilc *wilc, bool update);
+#endif