Merge tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.11

The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:

net/mac80211/cfg.c
  https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au

drivers/net/wireless/microchip/wilc1000/netdev.c
  https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au

Major changes:

cfg80211/mac80211
 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers

wilc1000
 * read MAC address during probe to make it visible to user space

iwlwifi
 * bump FW API to 91 for BZ/SC devices
 * report 64-bit radiotap timestamp
 * enable P2P low latency by default
 * handle Transmit Power Envelope (TPE) advertised by AP
 * start using guard()

rtlwifi
 * RTL8192DU support

ath12k
 * remove unsupported tx monitor handling
 * channel 2 in 6 GHz band support
 * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
 * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
   support
 * dynamic VLAN support
 * add panic handler for resetting the firmware state

ath10k
 * add qcom,no-msa-ready-indicator Device Tree property
 * LED support for various chipsets

* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
  wifi: ath12k: add hw_link_id in ath12k_pdev
  wifi: ath12k: add panic handler
  wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
  wifi: brcm80211: remove unused structs
  wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
  wifi: ath12k: do not process consecutive RDDM event
  dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
  wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
  wifi: rtlwifi: handle return value of usb init TX/RX
  wifi: rtlwifi: Enable the new rtl8192du driver
  wifi: rtlwifi: Add rtl8192du/sw.c
  wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
  wifi: rtlwifi: Add rtl8192du/dm.{c,h}
  wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
  wifi: rtlwifi: Add rtl8192du/rf.{c,h}
  wifi: rtlwifi: Add rtl8192du/trx.{c,h}
  wifi: rtlwifi: Add rtl8192du/phy.{c,h}
  wifi: rtlwifi: Add rtl8192du/hw.{c,h}
  wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
  wifi: rtlwifi: Add rtl8192du/table.{c,h}
  ...

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

====================

Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 4 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtw89/fw.h b/drivers/net/wireless/realtek/rtw89/fw.h
index 4151c9d566bd..01fea0b004d3 100644
--- a/drivers/net/wireless/realtek/rtw89/fw.h
+++ b/drivers/net/wireless/realtek/rtw89/fw.h
@@ -2722,6 +2722,7 @@ struct rtw89_h2c_scanofld_be {
 #define RTW89_H2C_SCANOFLD_BE_W0_MACID GENMASK(23, 8)
 #define RTW89_H2C_SCANOFLD_BE_W0_PORT GENMASK(26, 24)
 #define RTW89_H2C_SCANOFLD_BE_W0_BAND GENMASK(28, 27)
+#define RTW89_H2C_SCANOFLD_BE_W0_PROBE_WITH_RATE BIT(29)
 #define RTW89_H2C_SCANOFLD_BE_W1_NUM_MACC_ROLE GENMASK(7, 0)
 #define RTW89_H2C_SCANOFLD_BE_W1_NUM_OP GENMASK(15, 8)
 #define RTW89_H2C_SCANOFLD_BE_W1_NORM_PD GENMASK(31, 16)
@@ -2738,6 +2739,9 @@ struct rtw89_h2c_scanofld_be {
 #define RTW89_H2C_SCANOFLD_BE_W5_MLO_MODE GENMASK(31, 0)
 #define RTW89_H2C_SCANOFLD_BE_W6_CHAN_PROHIB_LOW GENMASK(31, 0)
 #define RTW89_H2C_SCANOFLD_BE_W7_CHAN_PROHIB_HIGH GENMASK(31, 0)
+#define RTW89_H2C_SCANOFLD_BE_W8_PROBE_RATE_2GHZ GENMASK(7, 0)
+#define RTW89_H2C_SCANOFLD_BE_W8_PROBE_RATE_5GHZ GENMASK(15, 8)
+#define RTW89_H2C_SCANOFLD_BE_W8_PROBE_RATE_6GHZ GENMASK(23, 16)
 
 static inline void RTW89_SET_FWCMD_P2P_MACID(void *cmd, u32 val)
 {