wifi: cw1200: Convert to GPIO descriptors

The CW1200 uses two GPIOs to control the powerup and reset
pins, get these from GPIO descriptors instead of being passed
as platform data from boardfiles.

The RESET line will need to be marked as active low as we will
let gpiolib handle the polarity inversion.

The SDIO case is a bit special since the "card" need to be
powered up before it gets detected on the SDIO bus and
properly probed. Fix this by using board-specific GPIOs
assigned to device "NULL".

There are currently no in-tree users.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240131-descriptors-wireless-v1-6-e1c7c5d68746@linaro.org

1 files changed, 40 insertions, 31 deletions

diff --git a/drivers/net/wireless/st/cw1200/cw1200_spi.c b/drivers/net/wireless/st/cw1200/cw1200_spi.c
index b27b57fc25bc..fb3aafcafe18 100644
--- a/drivers/net/wireless/st/cw1200/cw1200_spi.c
+++ b/drivers/net/wireless/st/cw1200/cw1200_spi.c
@@ -11,7 +11,7 @@
  */
 
 #include <linux/module.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
@@ -38,6 +38,8 @@ struct hwbus_priv {
 	const struct cw1200_platform_data_spi *pdata;
 	spinlock_t		lock; /* Serialize all bus operations */
 	wait_queue_head_t       wq;
+	struct gpio_desc	*reset;
+	struct gpio_desc	*powerup;
 	int claimed;
 };
 
@@ -269,12 +271,12 @@ static void cw1200_spi_irq_unsubscribe(struct hwbus_priv *self)
 	free_irq(self->func->irq, self);
 }
 
-static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata)
+static int cw1200_spi_off(struct hwbus_priv *self, const struct cw1200_platform_data_spi *pdata)
 {
-	if (pdata->reset) {
-		gpio_set_value(pdata->reset, 0);
+	if (self->reset) {
+		/* Assert RESET, note active low */
+		gpiod_set_value(self->reset, 1);
 		msleep(30); /* Min is 2 * CLK32K cycles */
-		gpio_free(pdata->reset);
 	}
 
 	if (pdata->power_ctrl)
@@ -285,18 +287,12 @@ static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata)
 	return 0;
 }
 
-static int cw1200_spi_on(const struct cw1200_platform_data_spi *pdata)
+static int cw1200_spi_on(struct hwbus_priv *self, const struct cw1200_platform_data_spi *pdata)
 {
 	/* Ensure I/Os are pulled low */
-	if (pdata->reset) {
-		gpio_request(pdata->reset, "cw1200_wlan_reset");
-		gpio_direction_output(pdata->reset, 0);
-	}
-	if (pdata->powerup) {
-		gpio_request(pdata->powerup, "cw1200_wlan_powerup");
-		gpio_direction_output(pdata->powerup, 0);
-	}
-	if (pdata->reset || pdata->powerup)
+	gpiod_direction_output(self->reset, 1); /* Active low */
+	gpiod_direction_output(self->powerup, 0);
+	if (self->reset || self->powerup)
 		msleep(10); /* Settle time? */
 
 	/* Enable 3v3 and 1v8 to hardware */
@@ -317,13 +313,13 @@ static int cw1200_spi_on(const struct cw1200_platform_data_spi *pdata)
 	}
 
 	/* Enable POWERUP signal */
-	if (pdata->powerup) {
-		gpio_set_value(pdata->powerup, 1);
+	if (self->powerup) {
+		gpiod_set_value(self->powerup, 1);
 		msleep(250); /* or more..? */
 	}
-	/* Enable RSTn signal */
-	if (pdata->reset) {
-		gpio_set_value(pdata->reset, 1);
+	/* Assert RSTn signal, note active low */
+	if (self->reset) {
+		gpiod_set_value(self->reset, 0);
 		msleep(50); /* Or more..? */
 	}
 	return 0;
@@ -375,20 +371,33 @@ static int cw1200_spi_probe(struct spi_device *func)
 		spi_get_chipselect(func, 0), func->mode, func->bits_per_word,
 		func->max_speed_hz);
 
-	if (cw1200_spi_on(plat_data)) {
+	self = devm_kzalloc(&func->dev, sizeof(*self), GFP_KERNEL);
+	if (!self) {
+		pr_err("Can't allocate SPI hwbus_priv.");
+		return -ENOMEM;
+	}
+
+	/* Request reset asserted */
+	self->reset = devm_gpiod_get_optional(&func->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(self->reset))
+		return dev_err_probe(&func->dev, PTR_ERR(self->reset),
+				     "could not get reset GPIO\n");
+	gpiod_set_consumer_name(self->reset, "cw1200_wlan_reset");
+
+	self->powerup = devm_gpiod_get_optional(&func->dev, "powerup", GPIOD_OUT_LOW);
+	if (IS_ERR(self->powerup))
+		return dev_err_probe(&func->dev, PTR_ERR(self->powerup),
+				     "could not get powerup GPIO\n");
+	gpiod_set_consumer_name(self->reset, "cw1200_wlan_powerup");
+
+	if (cw1200_spi_on(self, plat_data)) {
 		pr_err("spi_on() failed!\n");
-		return -1;
+		return -ENODEV;
 	}
 
 	if (spi_setup(func)) {
 		pr_err("spi_setup() failed!\n");
-		return -1;
-	}
-
-	self = devm_kzalloc(&func->dev, sizeof(*self), GFP_KERNEL);
-	if (!self) {
-		pr_err("Can't allocate SPI hwbus_priv.");
-		return -ENOMEM;
+		return -ENODEV;
 	}
 
 	self->pdata = plat_data;
@@ -410,7 +419,7 @@ static int cw1200_spi_probe(struct spi_device *func)
 
 	if (status) {
 		cw1200_spi_irq_unsubscribe(self);
-		cw1200_spi_off(plat_data);
+		cw1200_spi_off(self, plat_data);
 	}
 
 	return status;
@@ -428,7 +437,7 @@ static void cw1200_spi_disconnect(struct spi_device *func)
 			self->core = NULL;
 		}
 	}
-	cw1200_spi_off(dev_get_platdata(&func->dev));
+	cw1200_spi_off(self, dev_get_platdata(&func->dev));
 }
 
 static int __maybe_unused cw1200_spi_suspend(struct device *dev)