summaryrefslogtreecommitdiff
path: root/drivers/nfc
diff options
context:
space:
mode:
authorChristophe Ricard <christophe.ricard@gmail.com>2015-12-23 23:45:11 +0100
committerSamuel Ortiz <sameo@linux.intel.com>2015-12-29 19:06:17 +0100
commitdfa8070d7f641e1fb1b5e5fe643faddfa4869e07 (patch)
tree1143d20cc5012543bce44a34af04caedc6077a1b /drivers/nfc
parent60cd6d89319f7f3854bad5f1bad570d9f135b03c (diff)
nfc: st21nfca: Add support for acpi probing for i2c device.
Add support for acpi probing. SMO2100 is used for st21nfca It has been tested with the following acpi node on Minnowboard Max: Note: Remove uicc-present or ese-present Package if one them is not supported. Device (NFC1) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "SMO2100") // _HID: Hardware ID Name (_CID, "SMO2100") // _CID: Compatible ID Name (_DDN, "SMO NFC") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Name (_DSD, Package (0x02) { /* Device Properties for _DSD */ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package (0x02) { Package (0x02) { "uicc-present", 1 }, Package (0x02) { "ese-present", 1 } } }) Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { I2cSerialBus (0x0001, ControllerInitiated, 400000, AddressingMode7Bit, "\\_SB.I2C7", 0x00, ResourceConsumer, ,) GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0001 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0002, } }) Return (SBUF) /* \_SB_.I2C7.NFC1._CRS.SBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/nfc')
-rw-r--r--drivers/nfc/st21nfca/i2c.c51
1 files changed, 50 insertions, 1 deletions
diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c
index 831e20d4da65..ae1653444549 100644
--- a/drivers/nfc/st21nfca/i2c.c
+++ b/drivers/nfc/st21nfca/i2c.c
@@ -21,8 +21,10 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
+#include <linux/acpi.h>
#include <linux/miscdevice.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
@@ -205,7 +207,6 @@ static int st21nfca_hci_i2c_write(void *phy_id, struct sk_buff *skb)
I2C_DUMP_SKB("st21nfca_hci_i2c_write", skb);
-
if (phy->hard_fault != 0)
return phy->hard_fault;
@@ -504,6 +505,41 @@ static struct nfc_phy_ops i2c_phy_ops = {
.disable = st21nfca_hci_i2c_disable,
};
+static int st21nfca_hci_i2c_acpi_request_resources(struct i2c_client *client)
+{
+ struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
+ const struct acpi_device_id *id;
+ struct gpio_desc *gpiod_ena;
+ struct device *dev;
+
+ if (!client)
+ return -EINVAL;
+
+ dev = &client->dev;
+
+ /* Match the struct device against a given list of ACPI IDs */
+ id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!id)
+ return -ENODEV;
+
+ /* Get EN GPIO from ACPI */
+ gpiod_ena = devm_gpiod_get_index(dev, ST21NFCA_GPIO_NAME_EN, 1,
+ GPIOD_OUT_LOW);
+ if (!IS_ERR(gpiod_ena))
+ phy->gpio_ena = desc_to_gpio(gpiod_ena);
+
+ phy->gpio_ena = desc_to_gpio(gpiod_ena);
+
+ phy->irq_polarity = irq_get_trigger_type(client->irq);
+
+ phy->se_status.is_ese_present =
+ device_property_present(dev, "ese-present");
+ phy->se_status.is_uicc_present =
+ device_property_present(dev, "uicc-present");
+
+ return 0;
+}
+
static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
{
struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
@@ -617,6 +653,12 @@ static int st21nfca_hci_i2c_probe(struct i2c_client *client,
nfc_err(&client->dev, "Cannot get platform resources\n");
return r;
}
+ } else if (ACPI_HANDLE(&client->dev)) {
+ r = st21nfca_hci_i2c_acpi_request_resources(client);
+ if (r) {
+ nfc_err(&client->dev, "Cannot get ACPI data\n");
+ return r;
+ }
} else {
nfc_err(&client->dev, "st21nfca platform resources not available\n");
return -ENODEV;
@@ -665,6 +707,12 @@ static struct i2c_device_id st21nfca_hci_i2c_id_table[] = {
};
MODULE_DEVICE_TABLE(i2c, st21nfca_hci_i2c_id_table);
+static const struct acpi_device_id st21nfca_hci_i2c_acpi_match[] = {
+ {"SMO2100", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, st21nfca_hci_i2c_acpi_match);
+
static const struct of_device_id of_st21nfca_i2c_match[] = {
{ .compatible = "st,st21nfca-i2c", },
{ .compatible = "st,st21nfca_i2c", },
@@ -677,6 +725,7 @@ static struct i2c_driver st21nfca_hci_i2c_driver = {
.owner = THIS_MODULE,
.name = ST21NFCA_HCI_I2C_DRIVER_NAME,
.of_match_table = of_match_ptr(of_st21nfca_i2c_match),
+ .acpi_match_table = ACPI_PTR(st21nfca_hci_i2c_acpi_match),
},
.probe = st21nfca_hci_i2c_probe,
.id_table = st21nfca_hci_i2c_id_table,