PCI: Collect all native drivers under drivers/pci/controller/

Native PCI drivers for root complex devices were originally all in
drivers/pci/host/.  Some of these devices can also be operated in endpoint
mode.  Drivers for endpoint mode didn't seem to fit in the "host"
directory, so we put both the root complex and endpoint drivers in
per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.

These per-device directories contain trivial Kconfig and Makefiles and
clutter drivers/pci/.  Make a new drivers/pci/controllers/ directory and
collect all the device-specific drivers there.

No functional change intended.

Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

1 files changed, 0 insertions, 1313 deletions

diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
deleted file mode 100644
index 23e270839e6a..000000000000
--- a/drivers/pci/host/pci-mvebu.c
+++ /dev/null
@@ -1,1313 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PCIe driver for Marvell Armada 370 and Armada XP SoCs
- *
- * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/msi.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
-#include <linux/of_pci.h>
-#include <linux/of_platform.h>
-
-#include "../pci.h"
-
-/*
- * PCIe unit register offsets.
- */
-#define PCIE_DEV_ID_OFF		0x0000
-#define PCIE_CMD_OFF		0x0004
-#define PCIE_DEV_REV_OFF	0x0008
-#define PCIE_BAR_LO_OFF(n)	(0x0010 + ((n) << 3))
-#define PCIE_BAR_HI_OFF(n)	(0x0014 + ((n) << 3))
-#define PCIE_CAP_PCIEXP		0x0060
-#define PCIE_HEADER_LOG_4_OFF	0x0128
-#define PCIE_BAR_CTRL_OFF(n)	(0x1804 + (((n) - 1) * 4))
-#define PCIE_WIN04_CTRL_OFF(n)	(0x1820 + ((n) << 4))
-#define PCIE_WIN04_BASE_OFF(n)	(0x1824 + ((n) << 4))
-#define PCIE_WIN04_REMAP_OFF(n)	(0x182c + ((n) << 4))
-#define PCIE_WIN5_CTRL_OFF	0x1880
-#define PCIE_WIN5_BASE_OFF	0x1884
-#define PCIE_WIN5_REMAP_OFF	0x188c
-#define PCIE_CONF_ADDR_OFF	0x18f8
-#define  PCIE_CONF_ADDR_EN		0x80000000
-#define  PCIE_CONF_REG(r)		((((r) & 0xf00) << 16) | ((r) & 0xfc))
-#define  PCIE_CONF_BUS(b)		(((b) & 0xff) << 16)
-#define  PCIE_CONF_DEV(d)		(((d) & 0x1f) << 11)
-#define  PCIE_CONF_FUNC(f)		(((f) & 0x7) << 8)
-#define  PCIE_CONF_ADDR(bus, devfn, where) \
-	(PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn))    | \
-	 PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
-	 PCIE_CONF_ADDR_EN)
-#define PCIE_CONF_DATA_OFF	0x18fc
-#define PCIE_MASK_OFF		0x1910
-#define  PCIE_MASK_ENABLE_INTS          0x0f000000
-#define PCIE_CTRL_OFF		0x1a00
-#define  PCIE_CTRL_X1_MODE		0x0001
-#define PCIE_STAT_OFF		0x1a04
-#define  PCIE_STAT_BUS                  0xff00
-#define  PCIE_STAT_DEV                  0x1f0000
-#define  PCIE_STAT_LINK_DOWN		BIT(0)
-#define PCIE_RC_RTSTA		0x1a14
-#define PCIE_DEBUG_CTRL         0x1a60
-#define  PCIE_DEBUG_SOFT_RESET		BIT(20)
-
-enum {
-	PCISWCAP = PCI_BRIDGE_CONTROL + 2,
-	PCISWCAP_EXP_LIST_ID	= PCISWCAP + PCI_CAP_LIST_ID,
-	PCISWCAP_EXP_DEVCAP	= PCISWCAP + PCI_EXP_DEVCAP,
-	PCISWCAP_EXP_DEVCTL	= PCISWCAP + PCI_EXP_DEVCTL,
-	PCISWCAP_EXP_LNKCAP	= PCISWCAP + PCI_EXP_LNKCAP,
-	PCISWCAP_EXP_LNKCTL	= PCISWCAP + PCI_EXP_LNKCTL,
-	PCISWCAP_EXP_SLTCAP	= PCISWCAP + PCI_EXP_SLTCAP,
-	PCISWCAP_EXP_SLTCTL	= PCISWCAP + PCI_EXP_SLTCTL,
-	PCISWCAP_EXP_RTCTL	= PCISWCAP + PCI_EXP_RTCTL,
-	PCISWCAP_EXP_RTSTA	= PCISWCAP + PCI_EXP_RTSTA,
-	PCISWCAP_EXP_DEVCAP2	= PCISWCAP + PCI_EXP_DEVCAP2,
-	PCISWCAP_EXP_DEVCTL2	= PCISWCAP + PCI_EXP_DEVCTL2,
-	PCISWCAP_EXP_LNKCAP2	= PCISWCAP + PCI_EXP_LNKCAP2,
-	PCISWCAP_EXP_LNKCTL2	= PCISWCAP + PCI_EXP_LNKCTL2,
-	PCISWCAP_EXP_SLTCAP2	= PCISWCAP + PCI_EXP_SLTCAP2,
-	PCISWCAP_EXP_SLTCTL2	= PCISWCAP + PCI_EXP_SLTCTL2,
-};
-
-/* PCI configuration space of a PCI-to-PCI bridge */
-struct mvebu_sw_pci_bridge {
-	u16 vendor;
-	u16 device;
-	u16 command;
-	u16 status;
-	u16 class;
-	u8 interface;
-	u8 revision;
-	u8 bist;
-	u8 header_type;
-	u8 latency_timer;
-	u8 cache_line_size;
-	u32 bar[2];
-	u8 primary_bus;
-	u8 secondary_bus;
-	u8 subordinate_bus;
-	u8 secondary_latency_timer;
-	u8 iobase;
-	u8 iolimit;
-	u16 secondary_status;
-	u16 membase;
-	u16 memlimit;
-	u16 iobaseupper;
-	u16 iolimitupper;
-	u32 romaddr;
-	u8 intline;
-	u8 intpin;
-	u16 bridgectrl;
-
-	/* PCI express capability */
-	u32 pcie_sltcap;
-	u16 pcie_devctl;
-	u16 pcie_rtctl;
-};
-
-struct mvebu_pcie_port;
-
-/* Structure representing all PCIe interfaces */
-struct mvebu_pcie {
-	struct platform_device *pdev;
-	struct mvebu_pcie_port *ports;
-	struct msi_controller *msi;
-	struct resource io;
-	struct resource realio;
-	struct resource mem;
-	struct resource busn;
-	int nports;
-};
-
-struct mvebu_pcie_window {
-	phys_addr_t base;
-	phys_addr_t remap;
-	size_t size;
-};
-
-/* Structure representing one PCIe interface */
-struct mvebu_pcie_port {
-	char *name;
-	void __iomem *base;
-	u32 port;
-	u32 lane;
-	int devfn;
-	unsigned int mem_target;
-	unsigned int mem_attr;
-	unsigned int io_target;
-	unsigned int io_attr;
-	struct clk *clk;
-	struct gpio_desc *reset_gpio;
-	char *reset_name;
-	struct mvebu_sw_pci_bridge bridge;
-	struct device_node *dn;
-	struct mvebu_pcie *pcie;
-	struct mvebu_pcie_window memwin;
-	struct mvebu_pcie_window iowin;
-	u32 saved_pcie_stat;
-};
-
-static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
-{
-	writel(val, port->base + reg);
-}
-
-static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg)
-{
-	return readl(port->base + reg);
-}
-
-static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port)
-{
-	return port->io_target != -1 && port->io_attr != -1;
-}
-
-static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
-{
-	return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
-}
-
-static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
-{
-	u32 stat;
-
-	stat = mvebu_readl(port, PCIE_STAT_OFF);
-	stat &= ~PCIE_STAT_BUS;
-	stat |= nr << 8;
-	mvebu_writel(port, stat, PCIE_STAT_OFF);
-}
-
-static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
-{
-	u32 stat;
-
-	stat = mvebu_readl(port, PCIE_STAT_OFF);
-	stat &= ~PCIE_STAT_DEV;
-	stat |= nr << 16;
-	mvebu_writel(port, stat, PCIE_STAT_OFF);
-}
-
-/*
- * Setup PCIE BARs and Address Decode Wins:
- * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
- * WIN[0-3] -> DRAM bank[0-3]
- */
-static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
-{
-	const struct mbus_dram_target_info *dram;
-	u32 size;
-	int i;
-
-	dram = mv_mbus_dram_info();
-
-	/* First, disable and clear BARs and windows. */
-	for (i = 1; i < 3; i++) {
-		mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
-		mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
-		mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i));
-	}
-
-	for (i = 0; i < 5; i++) {
-		mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i));
-		mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i));
-		mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
-	}
-
-	mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
-	mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
-	mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
-
-	/* Setup windows for DDR banks.  Count total DDR size on the fly. */
-	size = 0;
-	for (i = 0; i < dram->num_cs; i++) {
-		const struct mbus_dram_window *cs = dram->cs + i;
-
-		mvebu_writel(port, cs->base & 0xffff0000,
-			     PCIE_WIN04_BASE_OFF(i));
-		mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
-		mvebu_writel(port,
-			     ((cs->size - 1) & 0xffff0000) |
-			     (cs->mbus_attr << 8) |
-			     (dram->mbus_dram_target_id << 4) | 1,
-			     PCIE_WIN04_CTRL_OFF(i));
-
-		size += cs->size;
-	}
-
-	/* Round up 'size' to the nearest power of two. */
-	if ((size & (size - 1)) != 0)
-		size = 1 << fls(size);
-
-	/* Setup BAR[1] to all DRAM banks. */
-	mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1));
-	mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
-	mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
-		     PCIE_BAR_CTRL_OFF(1));
-}
-
-static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
-{
-	u32 cmd, mask;
-
-	/* Point PCIe unit MBUS decode windows to DRAM space. */
-	mvebu_pcie_setup_wins(port);
-
-	/* Master + slave enable. */
-	cmd = mvebu_readl(port, PCIE_CMD_OFF);
-	cmd |= PCI_COMMAND_IO;
-	cmd |= PCI_COMMAND_MEMORY;
-	cmd |= PCI_COMMAND_MASTER;
-	mvebu_writel(port, cmd, PCIE_CMD_OFF);
-
-	/* Enable interrupt lines A-D. */
-	mask = mvebu_readl(port, PCIE_MASK_OFF);
-	mask |= PCIE_MASK_ENABLE_INTS;
-	mvebu_writel(port, mask, PCIE_MASK_OFF);
-}
-
-static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
-				 struct pci_bus *bus,
-				 u32 devfn, int where, int size, u32 *val)
-{
-	void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
-
-	mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
-		     PCIE_CONF_ADDR_OFF);
-
-	switch (size) {
-	case 1:
-		*val = readb_relaxed(conf_data + (where & 3));
-		break;
-	case 2:
-		*val = readw_relaxed(conf_data + (where & 2));
-		break;
-	case 4:
-		*val = readl_relaxed(conf_data);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
-				 struct pci_bus *bus,
-				 u32 devfn, int where, int size, u32 val)
-{
-	void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
-
-	mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
-		     PCIE_CONF_ADDR_OFF);
-
-	switch (size) {
-	case 1:
-		writeb(val, conf_data + (where & 3));
-		break;
-	case 2:
-		writew(val, conf_data + (where & 2));
-		break;
-	case 4:
-		writel(val, conf_data);
-		break;
-	default:
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * Remove windows, starting from the largest ones to the smallest
- * ones.
- */
-static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
-				   phys_addr_t base, size_t size)
-{
-	while (size) {
-		size_t sz = 1 << (fls(size) - 1);
-
-		mvebu_mbus_del_window(base, sz);
-		base += sz;
-		size -= sz;
-	}
-}
-
-/*
- * MBus windows can only have a power of two size, but PCI BARs do not
- * have this constraint. Therefore, we have to split the PCI BAR into
- * areas each having a power of two size. We start from the largest
- * one (i.e highest order bit set in the size).
- */
-static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
-				   unsigned int target, unsigned int attribute,
-				   phys_addr_t base, size_t size,
-				   phys_addr_t remap)
-{
-	size_t size_mapped = 0;
-
-	while (size) {
-		size_t sz = 1 << (fls(size) - 1);
-		int ret;
-
-		ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base,
-							sz, remap);
-		if (ret) {
-			phys_addr_t end = base + sz - 1;
-
-			dev_err(&port->pcie->pdev->dev,
-				"Could not create MBus window at [mem %pa-%pa]: %d\n",
-				&base, &end, ret);
-			mvebu_pcie_del_windows(port, base - size_mapped,
-					       size_mapped);
-			return;
-		}
-
-		size -= sz;
-		size_mapped += sz;
-		base += sz;
-		if (remap != MVEBU_MBUS_NO_REMAP)
-			remap += sz;
-	}
-}
-
-static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
-				  unsigned int target, unsigned int attribute,
-				  const struct mvebu_pcie_window *desired,
-				  struct mvebu_pcie_window *cur)
-{
-	if (desired->base == cur->base && desired->remap == cur->remap &&
-	    desired->size == cur->size)
-		return;
-
-	if (cur->size != 0) {
-		mvebu_pcie_del_windows(port, cur->base, cur->size);
-		cur->size = 0;
-		cur->base = 0;
-
-		/*
-		 * If something tries to change the window while it is enabled
-		 * the change will not be done atomically. That would be
-		 * difficult to do in the general case.
-		 */
-	}
-
-	if (desired->size == 0)
-		return;
-
-	mvebu_pcie_add_windows(port, target, attribute, desired->base,
-			       desired->size, desired->remap);
-	*cur = *desired;
-}
-
-static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
-{
-	struct mvebu_pcie_window desired = {};
-
-	/* Are the new iobase/iolimit values invalid? */
-	if (port->bridge.iolimit < port->bridge.iobase ||
-	    port->bridge.iolimitupper < port->bridge.iobaseupper ||
-	    !(port->bridge.command & PCI_COMMAND_IO)) {
-		mvebu_pcie_set_window(port, port->io_target, port->io_attr,
-				      &desired, &port->iowin);
-		return;
-	}
-
-	if (!mvebu_has_ioport(port)) {
-		dev_WARN(&port->pcie->pdev->dev,
-			 "Attempt to set IO when IO is disabled\n");
-		return;
-	}
-
-	/*
-	 * We read the PCI-to-PCI bridge emulated registers, and
-	 * calculate the base address and size of the address decoding
-	 * window to setup, according to the PCI-to-PCI bridge
-	 * specifications. iobase is the bus address, port->iowin_base
-	 * is the CPU address.
-	 */
-	desired.remap = ((port->bridge.iobase & 0xF0) << 8) |
-			(port->bridge.iobaseupper << 16);
-	desired.base = port->pcie->io.start + desired.remap;
-	desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) |
-			 (port->bridge.iolimitupper << 16)) -
-			desired.remap) +
-		       1;
-
-	mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
-			      &port->iowin);
-}
-
-static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
-{
-	struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
-
-	/* Are the new membase/memlimit values invalid? */
-	if (port->bridge.memlimit < port->bridge.membase ||
-	    !(port->bridge.command & PCI_COMMAND_MEMORY)) {
-		mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
-				      &desired, &port->memwin);
-		return;
-	}
-
-	/*
-	 * We read the PCI-to-PCI bridge emulated registers, and
-	 * calculate the base address and size of the address decoding
-	 * window to setup, according to the PCI-to-PCI bridge
-	 * specifications.
-	 */
-	desired.base = ((port->bridge.membase & 0xFFF0) << 16);
-	desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
-		       desired.base + 1;
-
-	mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
-			      &port->memwin);
-}
-
-/*
- * Initialize the configuration space of the PCI-to-PCI bridge
- * associated with the given PCIe interface.
- */
-static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port)
-{
-	struct mvebu_sw_pci_bridge *bridge = &port->bridge;
-
-	memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge));
-
-	bridge->class = PCI_CLASS_BRIDGE_PCI;
-	bridge->vendor = PCI_VENDOR_ID_MARVELL;
-	bridge->device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
-	bridge->revision = mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
-	bridge->header_type = PCI_HEADER_TYPE_BRIDGE;
-	bridge->cache_line_size = 0x10;
-
-	/* We support 32 bits I/O addressing */
-	bridge->iobase = PCI_IO_RANGE_TYPE_32;
-	bridge->iolimit = PCI_IO_RANGE_TYPE_32;
-
-	/* Add capabilities */
-	bridge->status = PCI_STATUS_CAP_LIST;
-}
-
-/*
- * Read the configuration space of the PCI-to-PCI bridge associated to
- * the given PCIe interface.
- */
-static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
-				  unsigned int where, int size, u32 *value)
-{
-	struct mvebu_sw_pci_bridge *bridge = &port->bridge;
-
-	switch (where & ~3) {
-	case PCI_VENDOR_ID:
-		*value = bridge->device << 16 | bridge->vendor;
-		break;
-
-	case PCI_COMMAND:
-		*value = bridge->command | bridge->status << 16;
-		break;
-
-	case PCI_CLASS_REVISION:
-		*value = bridge->class << 16 | bridge->interface << 8 |
-			 bridge->revision;
-		break;
-
-	case PCI_CACHE_LINE_SIZE:
-		*value = bridge->bist << 24 | bridge->header_type << 16 |
-			 bridge->latency_timer << 8 | bridge->cache_line_size;
-		break;
-
-	case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
-		*value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4];
-		break;
-
-	case PCI_PRIMARY_BUS:
-		*value = (bridge->secondary_latency_timer << 24 |
-			  bridge->subordinate_bus         << 16 |
-			  bridge->secondary_bus           <<  8 |
-			  bridge->primary_bus);
-		break;
-
-	case PCI_IO_BASE:
-		if (!mvebu_has_ioport(port))
-			*value = bridge->secondary_status << 16;
-		else
-			*value = (bridge->secondary_status << 16 |
-				  bridge->iolimit          <<  8 |
-				  bridge->iobase);
-		break;
-
-	case PCI_MEMORY_BASE:
-		*value = (bridge->memlimit << 16 | bridge->membase);
-		break;
-
-	case PCI_PREF_MEMORY_BASE:
-		*value = 0;
-		break;
-
-	case PCI_IO_BASE_UPPER16:
-		*value = (bridge->iolimitupper << 16 | bridge->iobaseupper);
-		break;
-
-	case PCI_CAPABILITY_LIST:
-		*value = PCISWCAP;
-		break;
-
-	case PCI_ROM_ADDRESS1:
-		*value = 0;
-		break;
-
-	case PCI_INTERRUPT_LINE:
-		/* LINE PIN MIN_GNT MAX_LAT */
-		*value = 0;
-		break;
-
-	case PCISWCAP_EXP_LIST_ID:
-		/* Set PCIe v2, root port, slot support */
-		*value = (PCI_EXP_TYPE_ROOT_PORT << 4 | 2 |
-			  PCI_EXP_FLAGS_SLOT) << 16 | PCI_CAP_ID_EXP;
-		break;
-
-	case PCISWCAP_EXP_DEVCAP:
-		*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP);
-		break;
-
-	case PCISWCAP_EXP_DEVCTL:
-		*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) &
-				 ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
-				   PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
-		*value |= bridge->pcie_devctl;
-		break;
-
-	case PCISWCAP_EXP_LNKCAP:
-		/*
-		 * PCIe requires the clock power management capability to be
-		 * hard-wired to zero for downstream ports
-		 */
-		*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) &
-			 ~PCI_EXP_LNKCAP_CLKPM;
-		break;
-
-	case PCISWCAP_EXP_LNKCTL:
-		*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
-		break;
-
-	case PCISWCAP_EXP_SLTCAP:
-		*value = bridge->pcie_sltcap;
-		break;
-
-	case PCISWCAP_EXP_SLTCTL:
-		*value = PCI_EXP_SLTSTA_PDS << 16;
-		break;
-
-	case PCISWCAP_EXP_RTCTL:
-		*value = bridge->pcie_rtctl;
-		break;
-
-	case PCISWCAP_EXP_RTSTA:
-		*value = mvebu_readl(port, PCIE_RC_RTSTA);
-		break;
-
-	/* PCIe requires the v2 fields to be hard-wired to zero */
-	case PCISWCAP_EXP_DEVCAP2:
-	case PCISWCAP_EXP_DEVCTL2:
-	case PCISWCAP_EXP_LNKCAP2:
-	case PCISWCAP_EXP_LNKCTL2:
-	case PCISWCAP_EXP_SLTCAP2:
-	case PCISWCAP_EXP_SLTCTL2:
-	default:
-		/*
-		 * PCI defines configuration read accesses to reserved or
-		 * unimplemented registers to read as zero and complete
-		 * normally.
-		 */
-		*value = 0;
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	if (size == 2)
-		*value = (*value >> (8 * (where & 3))) & 0xffff;
-	else if (size == 1)
-		*value = (*value >> (8 * (where & 3))) & 0xff;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/* Write to the PCI-to-PCI bridge configuration space */
-static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port,
-				     unsigned int where, int size, u32 value)
-{
-	struct mvebu_sw_pci_bridge *bridge = &port->bridge;
-	u32 mask, reg;
-	int err;
-
-	if (size == 4)
-		mask = 0x0;
-	else if (size == 2)
-		mask = ~(0xffff << ((where & 3) * 8));
-	else if (size == 1)
-		mask = ~(0xff << ((where & 3) * 8));
-	else
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, &reg);
-	if (err)
-		return err;
-
-	value = (reg & mask) | value << ((where & 3) * 8);
-
-	switch (where & ~3) {
-	case PCI_COMMAND:
-	{
-		u32 old = bridge->command;
-
-		if (!mvebu_has_ioport(port))
-			value &= ~PCI_COMMAND_IO;
-
-		bridge->command = value & 0xffff;
-		if ((old ^ bridge->command) & PCI_COMMAND_IO)
-			mvebu_pcie_handle_iobase_change(port);
-		if ((old ^ bridge->command) & PCI_COMMAND_MEMORY)
-			mvebu_pcie_handle_membase_change(port);
-		break;
-	}
-
-	case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
-		bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value;
-		break;
-
-	case PCI_IO_BASE:
-		/*
-		 * We also keep bit 1 set, it is a read-only bit that
-		 * indicates we support 32 bits addressing for the
-		 * I/O
-		 */
-		bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32;
-		bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32;
-		mvebu_pcie_handle_iobase_change(port);
-		break;
-
-	case PCI_MEMORY_BASE:
-		bridge->membase = value & 0xffff;
-		bridge->memlimit = value >> 16;
-		mvebu_pcie_handle_membase_change(port);
-		break;
-
-	case PCI_IO_BASE_UPPER16:
-		bridge->iobaseupper = value & 0xffff;
-		bridge->iolimitupper = value >> 16;
-		mvebu_pcie_handle_iobase_change(port);
-		break;
-
-	case PCI_PRIMARY_BUS:
-		bridge->primary_bus             = value & 0xff;
-		bridge->secondary_bus           = (value >> 8) & 0xff;
-		bridge->subordinate_bus         = (value >> 16) & 0xff;
-		bridge->secondary_latency_timer = (value >> 24) & 0xff;
-		mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus);
-		break;
-
-	case PCISWCAP_EXP_DEVCTL:
-		/*
-		 * Armada370 data says these bits must always
-		 * be zero when in root complex mode.
-		 */
-		value &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
-			   PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
-
-		/*
-		 * If the mask is 0xffff0000, then we only want to write
-		 * the device control register, rather than clearing the
-		 * RW1C bits in the device status register.  Mask out the
-		 * status register bits.
-		 */
-		if (mask == 0xffff0000)
-			value &= 0xffff;
-
-		mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
-		break;
-
-	case PCISWCAP_EXP_LNKCTL:
-		/*
-		 * If we don't support CLKREQ, we must ensure that the
-		 * CLKREQ enable bit always reads zero.  Since we haven't
-		 * had this capability, and it's dependent on board wiring,
-		 * disable it for the time being.
-		 */
-		value &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
-
-		/*
-		 * If the mask is 0xffff0000, then we only want to write
-		 * the link control register, rather than clearing the
-		 * RW1C bits in the link status register.  Mask out the
-		 * RW1C status register bits.
-		 */
-		if (mask == 0xffff0000)
-			value &= ~((PCI_EXP_LNKSTA_LABS |
-				    PCI_EXP_LNKSTA_LBMS) << 16);
-
-		mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
-		break;
-
-	case PCISWCAP_EXP_RTSTA:
-		mvebu_writel(port, value, PCIE_RC_RTSTA);
-		break;
-
-	default:
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
-{
-	return sys->private_data;
-}
-
-static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
-						    struct pci_bus *bus,
-						    int devfn)
-{
-	int i;
-
-	for (i = 0; i < pcie->nports; i++) {
-		struct mvebu_pcie_port *port = &pcie->ports[i];
-
-		if (bus->number == 0 && port->devfn == devfn)
-			return port;
-		if (bus->number != 0 &&
-		    bus->number >= port->bridge.secondary_bus &&
-		    bus->number <= port->bridge.subordinate_bus)
-			return port;
-	}
-
-	return NULL;
-}
-
-/* PCI configuration space write function */
-static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
-			      int where, int size, u32 val)
-{
-	struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
-	struct mvebu_pcie_port *port;
-	int ret;
-
-	port = mvebu_pcie_find_port(pcie, bus, devfn);
-	if (!port)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/* Access the emulated PCI-to-PCI bridge */
-	if (bus->number == 0)
-		return mvebu_sw_pci_bridge_write(port, where, size, val);
-
-	if (!mvebu_pcie_link_up(port))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/* Access the real PCIe interface */
-	ret = mvebu_pcie_hw_wr_conf(port, bus, devfn,
-				    where, size, val);
-
-	return ret;
-}
-
-/* PCI configuration space read function */
-static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
-			      int size, u32 *val)
-{
-	struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
-	struct mvebu_pcie_port *port;
-	int ret;
-
-	port = mvebu_pcie_find_port(pcie, bus, devfn);
-	if (!port) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	/* Access the emulated PCI-to-PCI bridge */
-	if (bus->number == 0)
-		return mvebu_sw_pci_bridge_read(port, where, size, val);
-
-	if (!mvebu_pcie_link_up(port)) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	/* Access the real PCIe interface */
-	ret = mvebu_pcie_hw_rd_conf(port, bus, devfn,
-				    where, size, val);
-
-	return ret;
-}
-
-static struct pci_ops mvebu_pcie_ops = {
-	.read = mvebu_pcie_rd_conf,
-	.write = mvebu_pcie_wr_conf,
-};
-
-static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct mvebu_pcie *pcie = sys_to_pcie(sys);
-	int err, i;
-
-	pcie->mem.name = "PCI MEM";
-	pcie->realio.name = "PCI I/O";
-
-	if (resource_size(&pcie->realio) != 0)
-		pci_add_resource_offset(&sys->resources, &pcie->realio,
-					sys->io_offset);
-
-	pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
-	pci_add_resource(&sys->resources, &pcie->busn);
-
-	err = devm_request_pci_bus_resources(&pcie->pdev->dev, &sys->resources);
-	if (err)
-		return 0;
-
-	for (i = 0; i < pcie->nports; i++) {
-		struct mvebu_pcie_port *port = &pcie->ports[i];
-
-		if (!port->base)
-			continue;
-		mvebu_pcie_setup_hw(port);
-	}
-
-	return 1;
-}
-
-static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
-						 const struct resource *res,
-						 resource_size_t start,
-						 resource_size_t size,
-						 resource_size_t align)
-{
-	if (dev->bus->number != 0)
-		return start;
-
-	/*
-	 * On the PCI-to-PCI bridge side, the I/O windows must have at
-	 * least a 64 KB size and the memory windows must have at
-	 * least a 1 MB size. Moreover, MBus windows need to have a
-	 * base address aligned on their size, and their size must be
-	 * a power of two. This means that if the BAR doesn't have a
-	 * power of two size, several MBus windows will actually be
-	 * created. We need to ensure that the biggest MBus window
-	 * (which will be the first one) is aligned on its size, which
-	 * explains the rounddown_pow_of_two() being done here.
-	 */
-	if (res->flags & IORESOURCE_IO)
-		return round_up(start, max_t(resource_size_t, SZ_64K,
-					     rounddown_pow_of_two(size)));
-	else if (res->flags & IORESOURCE_MEM)
-		return round_up(start, max_t(resource_size_t, SZ_1M,
-					     rounddown_pow_of_two(size)));
-	else
-		return start;
-}
-
-static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
-{
-	struct hw_pci hw;
-
-	memset(&hw, 0, sizeof(hw));
-
-#ifdef CONFIG_PCI_MSI
-	hw.msi_ctrl = pcie->msi;
-#endif
-
-	hw.nr_controllers = 1;
-	hw.private_data   = (void **)&pcie;
-	hw.setup          = mvebu_pcie_setup;
-	hw.map_irq        = of_irq_parse_and_map_pci;
-	hw.ops            = &mvebu_pcie_ops;
-	hw.align_resource = mvebu_pcie_align_resource;
-
-	pci_common_init_dev(&pcie->pdev->dev, &hw);
-}
-
-/*
- * Looks up the list of register addresses encoded into the reg =
- * <...> property for one that matches the given port/lane. Once
- * found, maps it.
- */
-static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
-					      struct device_node *np,
-					      struct mvebu_pcie_port *port)
-{
-	struct resource regs;
-	int ret = 0;
-
-	ret = of_address_to_resource(np, 0, &regs);
-	if (ret)
-		return ERR_PTR(ret);
-
-	return devm_ioremap_resource(&pdev->dev, &regs);
-}
-
-#define DT_FLAGS_TO_TYPE(flags)       (((flags) >> 24) & 0x03)
-#define    DT_TYPE_IO                 0x1
-#define    DT_TYPE_MEM32              0x2
-#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
-#define DT_CPUADDR_TO_ATTR(cpuaddr)   (((cpuaddr) >> 48) & 0xFF)
-
-static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
-			      unsigned long type,
-			      unsigned int *tgt,
-			      unsigned int *attr)
-{
-	const int na = 3, ns = 2;
-	const __be32 *range;
-	int rlen, nranges, rangesz, pna, i;
-
-	*tgt = -1;
-	*attr = -1;
-
-	range = of_get_property(np, "ranges", &rlen);
-	if (!range)
-		return -EINVAL;
-
-	pna = of_n_addr_cells(np);
-	rangesz = pna + na + ns;
-	nranges = rlen / sizeof(__be32) / rangesz;
-
-	for (i = 0; i < nranges; i++, range += rangesz) {
-		u32 flags = of_read_number(range, 1);
-		u32 slot = of_read_number(range + 1, 1);
-		u64 cpuaddr = of_read_number(range + na, pna);
-		unsigned long rtype;
-
-		if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
-			rtype = IORESOURCE_IO;
-		else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
-			rtype = IORESOURCE_MEM;
-		else
-			continue;
-
-		if (slot == PCI_SLOT(devfn) && type == rtype) {
-			*tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
-			*attr = DT_CPUADDR_TO_ATTR(cpuaddr);
-			return 0;
-		}
-	}
-
-	return -ENOENT;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int mvebu_pcie_suspend(struct device *dev)
-{
-	struct mvebu_pcie *pcie;
-	int i;
-
-	pcie = dev_get_drvdata(dev);
-	for (i = 0; i < pcie->nports; i++) {
-		struct mvebu_pcie_port *port = pcie->ports + i;
-		port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
-	}
-
-	return 0;
-}
-
-static int mvebu_pcie_resume(struct device *dev)
-{
-	struct mvebu_pcie *pcie;
-	int i;
-
-	pcie = dev_get_drvdata(dev);
-	for (i = 0; i < pcie->nports; i++) {
-		struct mvebu_pcie_port *port = pcie->ports + i;
-		mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
-		mvebu_pcie_setup_hw(port);
-	}
-
-	return 0;
-}
-#endif
-
-static void mvebu_pcie_port_clk_put(void *data)
-{
-	struct mvebu_pcie_port *port = data;
-
-	clk_put(port->clk);
-}
-
-static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
-	struct mvebu_pcie_port *port, struct device_node *child)
-{
-	struct device *dev = &pcie->pdev->dev;
-	enum of_gpio_flags flags;
-	int reset_gpio, ret;
-
-	port->pcie = pcie;
-
-	if (of_property_read_u32(child, "marvell,pcie-port", &port->port)) {
-		dev_warn(dev, "ignoring %pOF, missing pcie-port property\n",
-			 child);
-		goto skip;
-	}
-
-	if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane))
-		port->lane = 0;
-
-	port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port,
-				    port->lane);
-	if (!port->name) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	port->devfn = of_pci_get_devfn(child);
-	if (port->devfn < 0)
-		goto skip;
-
-	ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM,
-				 &port->mem_target, &port->mem_attr);
-	if (ret < 0) {
-		dev_err(dev, "%s: cannot get tgt/attr for mem window\n",
-			port->name);
-		goto skip;
-	}
-
-	if (resource_size(&pcie->io) != 0) {
-		mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_IO,
-				   &port->io_target, &port->io_attr);
-	} else {
-		port->io_target = -1;
-		port->io_attr = -1;
-	}
-
-	reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
-	if (reset_gpio == -EPROBE_DEFER) {
-		ret = reset_gpio;
-		goto err;
-	}
-
-	if (gpio_is_valid(reset_gpio)) {
-		unsigned long gpio_flags;
-
-		port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
-						  port->name);
-		if (!port->reset_name) {
-			ret = -ENOMEM;
-			goto err;
-		}
-
-		if (flags & OF_GPIO_ACTIVE_LOW) {
-			dev_info(dev, "%pOF: reset gpio is active low\n",
-				 child);
-			gpio_flags = GPIOF_ACTIVE_LOW |
-				     GPIOF_OUT_INIT_LOW;
-		} else {
-			gpio_flags = GPIOF_OUT_INIT_HIGH;
-		}
-
-		ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
-					    port->reset_name);
-		if (ret) {
-			if (ret == -EPROBE_DEFER)
-				goto err;
-			goto skip;
-		}
-
-		port->reset_gpio = gpio_to_desc(reset_gpio);
-	}
-
-	port->clk = of_clk_get_by_name(child, NULL);
-	if (IS_ERR(port->clk)) {
-		dev_err(dev, "%s: cannot get clock\n", port->name);
-		goto skip;
-	}
-
-	ret = devm_add_action(dev, mvebu_pcie_port_clk_put, port);
-	if (ret < 0) {
-		clk_put(port->clk);
-		goto err;
-	}
-
-	return 1;
-
-skip:
-	ret = 0;
-
-	/* In the case of skipping, we need to free these */
-	devm_kfree(dev, port->reset_name);
-	port->reset_name = NULL;
-	devm_kfree(dev, port->name);
-	port->name = NULL;
-
-err:
-	return ret;
-}
-
-/*
- * Power up a PCIe port.  PCIe requires the refclk to be stable for 100µs
- * prior to releasing PERST.  See table 2-4 in section 2.6.2 AC Specifications
- * of the PCI Express Card Electromechanical Specification, 1.1.
- */
-static int mvebu_pcie_powerup(struct mvebu_pcie_port *port)
-{
-	int ret;
-
-	ret = clk_prepare_enable(port->clk);
-	if (ret < 0)
-		return ret;
-
-	if (port->reset_gpio) {
-		u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
-
-		of_property_read_u32(port->dn, "reset-delay-us",
-				     &reset_udelay);
-
-		udelay(100);
-
-		gpiod_set_value_cansleep(port->reset_gpio, 0);
-		msleep(reset_udelay / 1000);
-	}
-
-	return 0;
-}
-
-/*
- * Power down a PCIe port.  Strictly, PCIe requires us to place the card
- * in D3hot state before asserting PERST#.
- */
-static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port)
-{
-	gpiod_set_value_cansleep(port->reset_gpio, 1);
-
-	clk_disable_unprepare(port->clk);
-}
-
-static int mvebu_pcie_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct mvebu_pcie *pcie;
-	struct device_node *np = dev->of_node;
-	struct device_node *child;
-	int num, i, ret;
-
-	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
-	if (!pcie)
-		return -ENOMEM;
-
-	pcie->pdev = pdev;
-	platform_set_drvdata(pdev, pcie);
-
-	/* Get the PCIe memory and I/O aperture */
-	mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
-	if (resource_size(&pcie->mem) == 0) {
-		dev_err(dev, "invalid memory aperture size\n");
-		return -EINVAL;
-	}
-
-	mvebu_mbus_get_pcie_io_aperture(&pcie->io);
-
-	if (resource_size(&pcie->io) != 0) {
-		pcie->realio.flags = pcie->io.flags;
-		pcie->realio.start = PCIBIOS_MIN_IO;
-		pcie->realio.end = min_t(resource_size_t,
-					 IO_SPACE_LIMIT,
-					 resource_size(&pcie->io));
-	} else
-		pcie->realio = pcie->io;
-
-	/* Get the bus range */
-	ret = of_pci_parse_bus_range(np, &pcie->busn);
-	if (ret) {
-		dev_err(dev, "failed to parse bus-range property: %d\n", ret);
-		return ret;
-	}
-
-	num = of_get_available_child_count(np);
-
-	pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL);
-	if (!pcie->ports)
-		return -ENOMEM;
-
-	i = 0;
-	for_each_available_child_of_node(np, child) {
-		struct mvebu_pcie_port *port = &pcie->ports[i];
-
-		ret = mvebu_pcie_parse_port(pcie, port, child);
-		if (ret < 0) {
-			of_node_put(child);
-			return ret;
-		} else if (ret == 0) {
-			continue;
-		}
-
-		port->dn = child;
-		i++;
-	}
-	pcie->nports = i;
-
-	for (i = 0; i < pcie->nports; i++) {
-		struct mvebu_pcie_port *port = &pcie->ports[i];
-
-		child = port->dn;
-		if (!child)
-			continue;
-
-		ret = mvebu_pcie_powerup(port);
-		if (ret < 0)
-			continue;
-
-		port->base = mvebu_pcie_map_registers(pdev, child, port);
-		if (IS_ERR(port->base)) {
-			dev_err(dev, "%s: cannot map registers\n", port->name);
-			port->base = NULL;
-			mvebu_pcie_powerdown(port);
-			continue;
-		}
-
-		mvebu_pcie_set_local_dev_nr(port, 1);
-		mvebu_sw_pci_bridge_init(port);
-	}
-
-	pcie->nports = i;
-
-	for (i = 0; i < (IO_SPACE_LIMIT - SZ_64K); i += SZ_64K)
-		pci_ioremap_io(i, pcie->io.start + i);
-
-	mvebu_pcie_enable(pcie);
-
-	platform_set_drvdata(pdev, pcie);
-
-	return 0;
-}
-
-static const struct of_device_id mvebu_pcie_of_match_table[] = {
-	{ .compatible = "marvell,armada-xp-pcie", },
-	{ .compatible = "marvell,armada-370-pcie", },
-	{ .compatible = "marvell,dove-pcie", },
-	{ .compatible = "marvell,kirkwood-pcie", },
-	{},
-};
-
-static const struct dev_pm_ops mvebu_pcie_pm_ops = {
-	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume)
-};
-
-static struct platform_driver mvebu_pcie_driver = {
-	.driver = {
-		.name = "mvebu-pcie",
-		.of_match_table = mvebu_pcie_of_match_table,
-		/* driver unloading/unbinding currently not supported */
-		.suppress_bind_attrs = true,
-		.pm = &mvebu_pcie_pm_ops,
-	},
-	.probe = mvebu_pcie_probe,
-};
-builtin_platform_driver(mvebu_pcie_driver);