Merge tag 'qcom-drivers-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

More Qualcomm driver updates for v6.5

The detection of split/non-split firmware files in the MDT loader is
corrected. The Geni driver is updated to not enable unused interrupts,
in some configurations. The count unit for MSM8998 in BWMON is corrected.
RPM master stats driver is corrected to check for the right return value
of devm_ioremap().

Support for socinfo version 18 and 19 are aded, and IPQ5300 is added to
the list of platforms.

* tag 'qcom-drivers-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
  dt-bindings: sram: qcom,imem: document qdu1000
  soc: qcom: icc-bwmon: Fix MSM8998 count unit
  dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
  soc: qcom: socinfo: Add Soc ID for IPQ5300
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
  soc: qcom: Fix a IS_ERR() vs NULL bug in probe
  soc: qcom: socinfo: Add support for new fields in revision 19
  soc: qcom: socinfo: Add support for new fields in revision 18
  dt-bindings: firmware: scm: Add compatible for SDX75
  soc: qcom: mdt_loader: Fix split image detection

Link: https://lore.kernel.org/r/20230615163104.1461905-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 40 insertions, 34 deletions

diff --git a/drivers/soc/qcom/icc-bwmon.c b/drivers/soc/qcom/icc-bwmon.c
index fd58c5b69897..6c6da73214e4 100644
--- a/drivers/soc/qcom/icc-bwmon.c
+++ b/drivers/soc/qcom/icc-bwmon.c
@@ -806,7 +806,7 @@ static int bwmon_remove(struct platform_device *pdev)
 
 static const struct icc_bwmon_data msm8998_bwmon_data = {
 	.sample_ms = 4,
-	.count_unit_kb = 64,
+	.count_unit_kb = 1024,
 	.default_highbw_kbps = 4800 * 1024, /* 4.8 GBps */
 	.default_medbw_kbps = 512 * 1024, /* 512 MBps */
 	.default_lowbw_kbps = 0,
diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
index 9418993a3a92..6f177e46fa0f 100644
--- a/drivers/soc/qcom/mdt_loader.c
+++ b/drivers/soc/qcom/mdt_loader.c
@@ -275,6 +275,14 @@ static bool qcom_mdt_bins_are_split(const struct firmware *fw, const char *fw_na
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
 
 	for (i = 0; i < ehdr->e_phnum; i++) {
+		/*
+		 * The size of the MDT file is not padded to include any
+		 * zero-sized segments at the end. Ignore these, as they should
+		 * not affect the decision about image being split or not.
+		 */
+		if (!phdrs[i].p_filesz)
+			continue;
+
 		seg_start = phdrs[i].p_offset;
 		seg_end = phdrs[i].p_offset + phdrs[i].p_filesz;
 		if (seg_start > fw->size || seg_end > fw->size)
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 795a2e1d59b3..0e01a31dde7a 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -281,27 +281,14 @@ static void geni_se_select_fifo_mode(struct geni_se *se)
 
 	geni_se_irq_clear(se);
 
-	/*
-	 * The RX path for the UART is asynchronous and so needs more
-	 * complex logic for enabling / disabling its interrupts.
-	 *
-	 * Specific notes:
-	 * - The done and TX-related interrupts are managed manually.
-	 * - We don't RX from the main sequencer (we use the secondary) so
-	 *   we don't need the RX-related interrupts enabled in the main
-	 *   sequencer for UART.
-	 */
+	/* UART driver manages enabling / disabling interrupts internally */
 	if (proto != GENI_SE_UART) {
+		/* Non-UART use only primary sequencer so dont bother about S_IRQ */
 		val_old = val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
 		val |= M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN;
 		val |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
 		if (val != val_old)
 			writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
-
-		val_old = val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
-		val |= S_CMD_DONE_EN;
-		if (val != val_old)
-			writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN);
 	}
 
 	val_old = val = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
@@ -317,17 +304,14 @@ static void geni_se_select_dma_mode(struct geni_se *se)
 
 	geni_se_irq_clear(se);
 
+	/* UART driver manages enabling / disabling interrupts internally */
 	if (proto != GENI_SE_UART) {
+		/* Non-UART use only primary sequencer so dont bother about S_IRQ */
 		val_old = val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
 		val &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN);
 		val &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
 		if (val != val_old)
 			writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
-
-		val_old = val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
-		val &= ~S_CMD_DONE_EN;
-		if (val != val_old)
-			writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN);
 	}
 
 	val_old = val = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
@@ -344,10 +328,6 @@ static void geni_se_select_gpi_mode(struct geni_se *se)
 
 	writel(0, se->base + SE_IRQ_EN);
 
-	val = readl(se->base + SE_GENI_S_IRQ_EN);
-	val &= ~S_CMD_DONE_EN;
-	writel(val, se->base + SE_GENI_S_IRQ_EN);
-
 	val = readl(se->base + SE_GENI_M_IRQ_EN);
 	val &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN |
 		 M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
diff --git a/drivers/soc/qcom/rpm_master_stats.c b/drivers/soc/qcom/rpm_master_stats.c
index 6dd98b9f7129..9ca13bcf67d3 100644
--- a/drivers/soc/qcom/rpm_master_stats.c
+++ b/drivers/soc/qcom/rpm_master_stats.c
@@ -105,7 +105,7 @@ static int master_stats_probe(struct platform_device *pdev)
 		}
 
 		data[i].base = devm_ioremap(dev, res.start, resource_size(&res));
-		if (IS_ERR(data[i].base)) {
+		if (!data[i].base) {
 			debugfs_remove_recursive(root);
 			return dev_err_probe(dev, -EINVAL,
 					     "Could not map the MSG RAM slice idx %d!\n", i);
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index dfd4330daef5..4d49945b3a35 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -133,12 +133,15 @@ struct socinfo_params {
 	u32 nproduct_id;
 	u32 num_clusters;
 	u32 ncluster_array_offset;
-	u32 num_defective_parts;
-	u32 ndefective_parts_array_offset;
+	u32 num_subset_parts;
+	u32 nsubset_parts_array_offset;
 	u32 nmodem_supported;
 	u32 feature_code;
 	u32 pcode;
 	u32 oem_variant;
+	u32 num_func_clusters;
+	u32 boot_cluster;
+	u32 boot_core;
 };
 
 struct smem_image_version {
@@ -411,6 +414,7 @@ static const struct soc_id soc_id[] = {
 	{ qcom_board_id(IPQ5322) },
 	{ qcom_board_id(IPQ5312) },
 	{ qcom_board_id(IPQ5302) },
+	{ qcom_board_id(IPQ5300) },
 };
 
 static const char *socinfo_machine(struct device *dev, unsigned int id)
@@ -565,6 +569,19 @@ static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
 			   &qcom_socinfo->info.fmt);
 
 	switch (qcom_socinfo->info.fmt) {
+	case SOCINFO_VERSION(0, 19):
+		qcom_socinfo->info.num_func_clusters = __le32_to_cpu(info->num_func_clusters);
+		qcom_socinfo->info.boot_cluster = __le32_to_cpu(info->boot_cluster);
+		qcom_socinfo->info.boot_core = __le32_to_cpu(info->boot_core);
+
+		debugfs_create_u32("num_func_clusters", 0444, qcom_socinfo->dbg_root,
+				   &qcom_socinfo->info.num_func_clusters);
+		debugfs_create_u32("boot_cluster", 0444, qcom_socinfo->dbg_root,
+				   &qcom_socinfo->info.boot_cluster);
+		debugfs_create_u32("boot_core", 0444, qcom_socinfo->dbg_root,
+				   &qcom_socinfo->info.boot_core);
+		fallthrough;
+	case SOCINFO_VERSION(0, 18):
 	case SOCINFO_VERSION(0, 17):
 		qcom_socinfo->info.oem_variant = __le32_to_cpu(info->oem_variant);
 		debugfs_create_u32("oem_variant", 0444, qcom_socinfo->dbg_root,
@@ -588,17 +605,18 @@ static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
 	case SOCINFO_VERSION(0, 14):
 		qcom_socinfo->info.num_clusters = __le32_to_cpu(info->num_clusters);
 		qcom_socinfo->info.ncluster_array_offset = __le32_to_cpu(info->ncluster_array_offset);
-		qcom_socinfo->info.num_defective_parts = __le32_to_cpu(info->num_defective_parts);
-		qcom_socinfo->info.ndefective_parts_array_offset = __le32_to_cpu(info->ndefective_parts_array_offset);
+		qcom_socinfo->info.num_subset_parts = __le32_to_cpu(info->num_subset_parts);
+		qcom_socinfo->info.nsubset_parts_array_offset =
+			__le32_to_cpu(info->nsubset_parts_array_offset);
 
 		debugfs_create_u32("num_clusters", 0444, qcom_socinfo->dbg_root,
 				   &qcom_socinfo->info.num_clusters);
 		debugfs_create_u32("ncluster_array_offset", 0444, qcom_socinfo->dbg_root,
 				   &qcom_socinfo->info.ncluster_array_offset);
-		debugfs_create_u32("num_defective_parts", 0444, qcom_socinfo->dbg_root,
-				   &qcom_socinfo->info.num_defective_parts);
-		debugfs_create_u32("ndefective_parts_array_offset", 0444, qcom_socinfo->dbg_root,
-				   &qcom_socinfo->info.ndefective_parts_array_offset);
+		debugfs_create_u32("num_subset_parts", 0444, qcom_socinfo->dbg_root,
+				   &qcom_socinfo->info.num_subset_parts);
+		debugfs_create_u32("nsubset_parts_array_offset", 0444, qcom_socinfo->dbg_root,
+				   &qcom_socinfo->info.nsubset_parts_array_offset);
 		fallthrough;
 	case SOCINFO_VERSION(0, 13):
 		qcom_socinfo->info.nproduct_id = __le32_to_cpu(info->nproduct_id);