soundwire: add missing newlines in dynamic debug logs

For some reason the newlines are not used everywhere. Fix as needed.

Reported-by: Joe Perches <joe@perches.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 55 insertions, 55 deletions

diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index ab64c2c4c33f..166b0c16003f 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -76,14 +76,14 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
 	/* Program DPN_OffsetCtrl2 registers */
 	ret = sdw_write(slave, addr1, t_params->offset2);
 	if (ret < 0) {
-		dev_err(bus->dev, "DPN_OffsetCtrl2 register write failed");
+		dev_err(bus->dev, "DPN_OffsetCtrl2 register write failed\n");
 		return ret;
 	}
 
 	/* Program DPN_BlockCtrl3 register */
 	ret = sdw_write(slave, addr2, t_params->blk_pkg_mode);
 	if (ret < 0) {
-		dev_err(bus->dev, "DPN_BlockCtrl3 register write failed");
+		dev_err(bus->dev, "DPN_BlockCtrl3 register write failed\n");
 		return ret;
 	}
 
@@ -102,7 +102,7 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
 
 	ret = sdw_write(slave, addr3, wbuf);
 	if (ret < 0) {
-		dev_err(bus->dev, "DPN_SampleCtrl2 register write failed");
+		dev_err(bus->dev, "DPN_SampleCtrl2 register write failed\n");
 		return ret;
 	}
 
@@ -113,7 +113,7 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
 
 	ret = sdw_write(slave, addr4, wbuf);
 	if (ret < 0)
-		dev_err(bus->dev, "DPN_HCtrl register write failed");
+		dev_err(bus->dev, "DPN_HCtrl register write failed\n");
 
 	return ret;
 }
@@ -159,7 +159,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 	ret = sdw_update(s_rt->slave, addr1, 0xF, wbuf);
 	if (ret < 0) {
 		dev_err(&s_rt->slave->dev,
-			"DPN_PortCtrl register write failed for port %d",
+			"DPN_PortCtrl register write failed for port %d\n",
 			t_params->port_num);
 		return ret;
 	}
@@ -168,7 +168,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 	ret = sdw_write(s_rt->slave, addr2, (p_params->bps - 1));
 	if (ret < 0) {
 		dev_err(&s_rt->slave->dev,
-			"DPN_BlockCtrl1 register write failed for port %d",
+			"DPN_BlockCtrl1 register write failed for port %d\n",
 			t_params->port_num);
 		return ret;
 	}
@@ -178,7 +178,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 	ret = sdw_write(s_rt->slave, addr3, wbuf);
 	if (ret < 0) {
 		dev_err(&s_rt->slave->dev,
-			"DPN_SampleCtrl1 register write failed for port %d",
+			"DPN_SampleCtrl1 register write failed for port %d\n",
 			t_params->port_num);
 		return ret;
 	}
@@ -187,7 +187,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 	ret = sdw_write(s_rt->slave, addr4, t_params->offset1);
 	if (ret < 0) {
 		dev_err(&s_rt->slave->dev,
-			"DPN_OffsetCtrl1 register write failed for port %d",
+			"DPN_OffsetCtrl1 register write failed for port %d\n",
 			t_params->port_num);
 		return ret;
 	}
@@ -197,7 +197,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 		ret = sdw_write(s_rt->slave, addr5, t_params->blk_grp_ctrl);
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
-				"DPN_BlockCtrl2 reg write failed for port %d",
+				"DPN_BlockCtrl2 reg write failed for port %d\n",
 				t_params->port_num);
 			return ret;
 		}
@@ -208,7 +208,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 		ret = sdw_write(s_rt->slave, addr6, t_params->lane_ctrl);
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
-				"DPN_LaneCtrl register write failed for port %d",
+				"DPN_LaneCtrl register write failed for port %d\n",
 				t_params->port_num);
 			return ret;
 		}
@@ -219,7 +219,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 						     t_params, dpn_prop->type);
 		if (ret < 0)
 			dev_err(&s_rt->slave->dev,
-				"Transport reg write failed for port: %d",
+				"Transport reg write failed for port: %d\n",
 				t_params->port_num);
 	}
 
@@ -316,7 +316,7 @@ static int sdw_enable_disable_slave_ports(struct sdw_bus *bus,
 
 	if (ret < 0)
 		dev_err(&s_rt->slave->dev,
-			"Slave chn_en reg write failed:%d port:%d",
+			"Slave chn_en reg write failed:%d port:%d\n",
 			ret, t_params->port_num);
 
 	return ret;
@@ -342,7 +342,7 @@ static int sdw_enable_disable_master_ports(struct sdw_master_runtime *m_rt,
 							bus->params.next_bank);
 		if (ret < 0) {
 			dev_err(bus->dev,
-				"Master chn_en write failed:%d port:%d",
+				"Master chn_en write failed:%d port:%d\n",
 				ret, t_params->port_num);
 			return ret;
 		}
@@ -400,7 +400,7 @@ static int sdw_do_port_prep(struct sdw_slave_runtime *s_rt,
 		ret = ops->port_prep(s_rt->slave, &prep_ch, cmd);
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
-				"Slave Port Prep cmd %d failed: %d", cmd, ret);
+				"Slave Port Prep cmd %d failed: %d\n", cmd, ret);
 			return ret;
 		}
 	}
@@ -429,7 +429,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 					  prep_ch.num);
 	if (!dpn_prop) {
 		dev_err(bus->dev,
-			"Slave Port:%d properties not found", prep_ch.num);
+			"Slave Port:%d properties not found\n", prep_ch.num);
 		return -EINVAL;
 	}
 
@@ -467,7 +467,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
-				"Slave prep_ctrl reg write failed");
+				"Slave prep_ctrl reg write failed\n");
 			return ret;
 		}
 
@@ -480,7 +480,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 		val &= p_rt->ch_mask;
 		if (!time_left || val) {
 			dev_err(&s_rt->slave->dev,
-				"Chn prep failed for port:%d", prep_ch.num);
+				"Chn prep failed for port:%d\n", prep_ch.num);
 			return -ETIMEDOUT;
 		}
 	}
@@ -515,7 +515,7 @@ static int sdw_prep_deprep_master_ports(struct sdw_master_runtime *m_rt,
 	if (ops->dpn_port_prep) {
 		ret = ops->dpn_port_prep(bus, &prep_ch);
 		if (ret < 0) {
-			dev_err(bus->dev, "Port prepare failed for port:%d",
+			dev_err(bus->dev, "Port prepare failed for port:%d\n",
 				t_params->port_num);
 			return ret;
 		}
@@ -584,7 +584,7 @@ static int sdw_notify_config(struct sdw_master_runtime *m_rt)
 		if (slave->ops->bus_config) {
 			ret = slave->ops->bus_config(slave, &bus->params);
 			if (ret < 0)
-				dev_err(bus->dev, "Notify Slave: %d failed",
+				dev_err(bus->dev, "Notify Slave: %d failed\n",
 					slave->dev_num);
 			return ret;
 		}
@@ -608,13 +608,13 @@ static int sdw_program_params(struct sdw_bus *bus)
 		ret = sdw_program_port_params(m_rt);
 		if (ret < 0) {
 			dev_err(bus->dev,
-				"Program transport params failed: %d", ret);
+				"Program transport params failed: %d\n", ret);
 			return ret;
 		}
 
 		ret = sdw_notify_config(m_rt);
 		if (ret < 0) {
-			dev_err(bus->dev, "Notify bus config failed: %d", ret);
+			dev_err(bus->dev, "Notify bus config failed: %d\n", ret);
 			return ret;
 		}
 
@@ -624,7 +624,7 @@ static int sdw_program_params(struct sdw_bus *bus)
 
 		ret = sdw_enable_disable_ports(m_rt, true);
 		if (ret < 0) {
-			dev_err(bus->dev, "Enable channel failed: %d", ret);
+			dev_err(bus->dev, "Enable channel failed: %d\n", ret);
 			return ret;
 		}
 	}
@@ -679,7 +679,7 @@ static int sdw_bank_switch(struct sdw_bus *bus, int m_rt_count)
 		ret = sdw_transfer(bus, wr_msg);
 
 	if (ret < 0) {
-		dev_err(bus->dev, "Slave frame_ctrl reg write failed");
+		dev_err(bus->dev, "Slave frame_ctrl reg write failed\n");
 		goto error;
 	}
 
@@ -719,7 +719,7 @@ static int sdw_ml_sync_bank_switch(struct sdw_bus *bus)
 						bus->bank_switch_timeout);
 
 	if (!time_left) {
-		dev_err(bus->dev, "Controller Timed out on bank switch");
+		dev_err(bus->dev, "Controller Timed out on bank switch\n");
 		return -ETIMEDOUT;
 	}
 
@@ -756,7 +756,7 @@ static int do_bank_switch(struct sdw_stream_runtime *stream)
 			ret = ops->pre_bank_switch(bus);
 			if (ret < 0) {
 				dev_err(bus->dev,
-					"Pre bank switch op failed: %d", ret);
+					"Pre bank switch op failed: %d\n", ret);
 				goto msg_unlock;
 			}
 		}
@@ -769,7 +769,7 @@ static int do_bank_switch(struct sdw_stream_runtime *stream)
 		 */
 		ret = sdw_bank_switch(bus, stream->m_rt_count);
 		if (ret < 0) {
-			dev_err(bus->dev, "Bank switch failed: %d", ret);
+			dev_err(bus->dev, "Bank switch failed: %d\n", ret);
 			goto error;
 
 		}
@@ -790,12 +790,12 @@ static int do_bank_switch(struct sdw_stream_runtime *stream)
 			ret = ops->post_bank_switch(bus);
 			if (ret < 0) {
 				dev_err(bus->dev,
-					"Post bank switch op failed: %d", ret);
+					"Post bank switch op failed: %d\n", ret);
 				goto error;
 			}
 		} else if (bus->multi_link && stream->m_rt_count > 1) {
 			dev_err(bus->dev,
-				"Post bank switch ops not implemented");
+				"Post bank switch ops not implemented\n");
 			goto error;
 		}
 
@@ -807,7 +807,7 @@ static int do_bank_switch(struct sdw_stream_runtime *stream)
 		ret = sdw_ml_sync_bank_switch(bus);
 		if (ret < 0) {
 			dev_err(bus->dev,
-				"multi link bank switch failed: %d", ret);
+				"multi link bank switch failed: %d\n", ret);
 			goto error;
 		}
 
@@ -1135,13 +1135,13 @@ static int sdw_config_stream(struct device *dev,
 	 */
 	if (stream->params.rate &&
 	    stream->params.rate != stream_config->frame_rate) {
-		dev_err(dev, "rate not matching, stream:%s", stream->name);
+		dev_err(dev, "rate not matching, stream:%s\n", stream->name);
 		return -EINVAL;
 	}
 
 	if (stream->params.bps &&
 	    stream->params.bps != stream_config->bps) {
-		dev_err(dev, "bps not matching, stream:%s", stream->name);
+		dev_err(dev, "bps not matching, stream:%s\n", stream->name);
 		return -EINVAL;
 	}
 
@@ -1161,7 +1161,7 @@ static int sdw_is_valid_port_range(struct device *dev,
 {
 	if (!SDW_VALID_PORT_RANGE(p_rt->num)) {
 		dev_err(dev,
-			"SoundWire: Invalid port number :%d", p_rt->num);
+			"SoundWire: Invalid port number :%d\n", p_rt->num);
 		return -EINVAL;
 	}
 
@@ -1272,7 +1272,7 @@ int sdw_stream_add_master(struct sdw_bus *bus,
 	 */
 	if (!bus->multi_link && stream->m_rt_count > 0) {
 		dev_err(bus->dev,
-			"Multilink not supported, link %d", bus->link_id);
+			"Multilink not supported, link %d\n", bus->link_id);
 		ret = -EINVAL;
 		goto unlock;
 	}
@@ -1280,7 +1280,7 @@ int sdw_stream_add_master(struct sdw_bus *bus,
 	m_rt = sdw_alloc_master_rt(bus, stream_config, stream);
 	if (!m_rt) {
 		dev_err(bus->dev,
-			"Master runtime config failed for stream:%s",
+			"Master runtime config failed for stream:%s\n",
 			stream->name);
 		ret = -ENOMEM;
 		goto unlock;
@@ -1338,7 +1338,7 @@ int sdw_stream_add_slave(struct sdw_slave *slave,
 	m_rt = sdw_alloc_master_rt(slave->bus, stream_config, stream);
 	if (!m_rt) {
 		dev_err(&slave->dev,
-			"alloc master runtime failed for stream:%s",
+			"alloc master runtime failed for stream:%s\n",
 			stream->name);
 		ret = -ENOMEM;
 		goto error;
@@ -1347,7 +1347,7 @@ int sdw_stream_add_slave(struct sdw_slave *slave,
 	s_rt = sdw_alloc_slave_rt(slave, stream_config, stream);
 	if (!s_rt) {
 		dev_err(&slave->dev,
-			"Slave runtime config failed for stream:%s",
+			"Slave runtime config failed for stream:%s\n",
 			stream->name);
 		ret = -ENOMEM;
 		goto stream_error;
@@ -1477,7 +1477,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
 
 		/* TODO: Support Asynchronous mode */
 		if ((prop->max_freq % stream->params.rate) != 0) {
-			dev_err(bus->dev, "Async mode not supported");
+			dev_err(bus->dev, "Async mode not supported\n");
 			return -EINVAL;
 		}
 
@@ -1489,7 +1489,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
 		/* Program params */
 		ret = sdw_program_params(bus);
 		if (ret < 0) {
-			dev_err(bus->dev, "Program params failed: %d", ret);
+			dev_err(bus->dev, "Program params failed: %d\n", ret);
 			goto restore_params;
 		}
 
@@ -1497,7 +1497,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
 
 	ret = do_bank_switch(stream);
 	if (ret < 0) {
-		dev_err(bus->dev, "Bank switch failed: %d", ret);
+		dev_err(bus->dev, "Bank switch failed: %d\n", ret);
 		goto restore_params;
 	}
 
@@ -1507,7 +1507,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
 		/* Prepare port(s) on the new clock configuration */
 		ret = sdw_prep_deprep_ports(m_rt, true);
 		if (ret < 0) {
-			dev_err(bus->dev, "Prepare port(s) failed ret = %d",
+			dev_err(bus->dev, "Prepare port(s) failed ret = %d\n",
 				ret);
 			return ret;
 		}
@@ -1534,7 +1534,7 @@ int sdw_prepare_stream(struct sdw_stream_runtime *stream)
 	int ret = 0;
 
 	if (!stream) {
-		pr_err("SoundWire: Handle not found for stream");
+		pr_err("SoundWire: Handle not found for stream\n");
 		return -EINVAL;
 	}
 
@@ -1542,7 +1542,7 @@ int sdw_prepare_stream(struct sdw_stream_runtime *stream)
 
 	ret = _sdw_prepare_stream(stream);
 	if (ret < 0)
-		pr_err("Prepare for stream:%s failed: %d", stream->name, ret);
+		pr_err("Prepare for stream:%s failed: %d\n", stream->name, ret);
 
 	sdw_release_bus_lock(stream);
 	return ret;
@@ -1562,21 +1562,21 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream)
 		/* Program params */
 		ret = sdw_program_params(bus);
 		if (ret < 0) {
-			dev_err(bus->dev, "Program params failed: %d", ret);
+			dev_err(bus->dev, "Program params failed: %d\n", ret);
 			return ret;
 		}
 
 		/* Enable port(s) */
 		ret = sdw_enable_disable_ports(m_rt, true);
 		if (ret < 0) {
-			dev_err(bus->dev, "Enable port(s) failed ret: %d", ret);
+			dev_err(bus->dev, "Enable port(s) failed ret: %d\n", ret);
 			return ret;
 		}
 	}
 
 	ret = do_bank_switch(stream);
 	if (ret < 0) {
-		dev_err(bus->dev, "Bank switch failed: %d", ret);
+		dev_err(bus->dev, "Bank switch failed: %d\n", ret);
 		return ret;
 	}
 
@@ -1596,7 +1596,7 @@ int sdw_enable_stream(struct sdw_stream_runtime *stream)
 	int ret = 0;
 
 	if (!stream) {
-		pr_err("SoundWire: Handle not found for stream");
+		pr_err("SoundWire: Handle not found for stream\n");
 		return -EINVAL;
 	}
 
@@ -1604,7 +1604,7 @@ int sdw_enable_stream(struct sdw_stream_runtime *stream)
 
 	ret = _sdw_enable_stream(stream);
 	if (ret < 0)
-		pr_err("Enable for stream:%s failed: %d", stream->name, ret);
+		pr_err("Enable for stream:%s failed: %d\n", stream->name, ret);
 
 	sdw_release_bus_lock(stream);
 	return ret;
@@ -1622,7 +1622,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
 		/* Disable port(s) */
 		ret = sdw_enable_disable_ports(m_rt, false);
 		if (ret < 0) {
-			dev_err(bus->dev, "Disable port(s) failed: %d", ret);
+			dev_err(bus->dev, "Disable port(s) failed: %d\n", ret);
 			return ret;
 		}
 	}
@@ -1633,7 +1633,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
 		/* Program params */
 		ret = sdw_program_params(bus);
 		if (ret < 0) {
-			dev_err(bus->dev, "Program params failed: %d", ret);
+			dev_err(bus->dev, "Program params failed: %d\n", ret);
 			return ret;
 		}
 	}
@@ -1653,7 +1653,7 @@ int sdw_disable_stream(struct sdw_stream_runtime *stream)
 	int ret = 0;
 
 	if (!stream) {
-		pr_err("SoundWire: Handle not found for stream");
+		pr_err("SoundWire: Handle not found for stream\n");
 		return -EINVAL;
 	}
 
@@ -1661,7 +1661,7 @@ int sdw_disable_stream(struct sdw_stream_runtime *stream)
 
 	ret = _sdw_disable_stream(stream);
 	if (ret < 0)
-		pr_err("Disable for stream:%s failed: %d", stream->name, ret);
+		pr_err("Disable for stream:%s failed: %d\n", stream->name, ret);
 
 	sdw_release_bus_lock(stream);
 	return ret;
@@ -1679,7 +1679,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
 		/* De-prepare port(s) */
 		ret = sdw_prep_deprep_ports(m_rt, false);
 		if (ret < 0) {
-			dev_err(bus->dev, "De-prepare port(s) failed: %d", ret);
+			dev_err(bus->dev, "De-prepare port(s) failed: %d\n", ret);
 			return ret;
 		}
 
@@ -1690,7 +1690,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
 		/* Program params */
 		ret = sdw_program_params(bus);
 		if (ret < 0) {
-			dev_err(bus->dev, "Program params failed: %d", ret);
+			dev_err(bus->dev, "Program params failed: %d\n", ret);
 			return ret;
 		}
 
@@ -1712,14 +1712,14 @@ int sdw_deprepare_stream(struct sdw_stream_runtime *stream)
 	int ret = 0;
 
 	if (!stream) {
-		pr_err("SoundWire: Handle not found for stream");
+		pr_err("SoundWire: Handle not found for stream\n");
 		return -EINVAL;
 	}
 
 	sdw_acquire_bus_lock(stream);
 	ret = _sdw_deprepare_stream(stream);
 	if (ret < 0)
-		pr_err("De-prepare for stream:%d failed: %d", ret, ret);
+		pr_err("De-prepare for stream:%d failed: %d\n", ret, ret);
 
 	sdw_release_bus_lock(stream);
 	return ret;