staging/atomisp: Add support for the Intel IPU v2

This patch adds support for the Intel IPU v2 as found on Android and IoT
Baytrail-T and Baytrail-CR platforms (those with the IPU PCI mapped). You
will also need the firmware files from your device (Android usually puts
them into /etc) - or you can find them in the downloadable restore/upgrade
kits if you blew them away for some reason.

It may be possible to extend the driver to handle the BYT/T windows
platforms such as the ASUS T100TA. These platforms don't expose the IPU via
the PCI interface but via ACPI buried in the GPU description and with the
camera information somewhere unknown so would need a platform driver
interface adding to the codebase *IFF* the firmware works on such devices.

To get good results you also need a suitable support library such as
libxcam. The camera is intended to be driven from Android so it has a lot of
features that many desktop apps don't fully spport.

In theory all the pieces are there to build it with -DISP2401 and some
differing files to get CherryTrail/T support, but unifying the drivers
properlly is a work in progress.

The IPU driver represents the work of a lot of people within Intel over many
years. It's historical goal was portability rather than Linux upstream. Any
queries about the upstream aimed driver should be sent to me not to the
original authors.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 209 insertions, 0 deletions

diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp-regs.h b/drivers/staging/media/atomisp/pci/atomisp2/atomisp-regs.h
new file mode 100644
index 000000000000..513a430ee01a
--- /dev/null
+++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp-regs.h
@@ -0,0 +1,209 @@
+/*
+ * Support for Medifield PNW Camera Imaging ISP subsystem.
+ *
+ * Copyright (c) 2012 Intel Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#ifndef ATOMISP_REGS_H
+#define ATOMISP_REGS_H
+
+/* common register definitions */
+#define PUNIT_PORT		0x04
+#define CCK_PORT		0x14
+
+#define PCICMDSTS		0x01
+#define INTR			0x0f
+#define MSI_CAPID		0x24
+#define MSI_ADDRESS		0x25
+#define MSI_DATA		0x26
+#define INTR_CTL		0x27
+
+#define PCI_MSI_CAPID		0x90
+#define PCI_MSI_ADDR		0x94
+#define PCI_MSI_DATA		0x98
+#define PCI_INTERRUPT_CTRL	0x9C
+#define PCI_I_CONTROL		0xfc
+
+/* MRFLD specific register definitions */
+#define MRFLD_CSI_AFE		0x39
+#define MRFLD_CSI_CONTROL	0x3a
+#define MRFLD_CSI_RCOMP		0x3d
+
+#define MRFLD_PCI_PMCS		0x84
+#define MRFLD_PCI_CSI_ACCESS_CTRL_VIOL	0xd4
+#define MRFLD_PCI_CSI_AFE_HS_CONTROL	0xdc
+#define MRFLD_PCI_CSI_AFE_RCOMP_CONTROL	0xe0
+#define MRFLD_PCI_CSI_CONTROL		0xe8
+#define MRFLD_PCI_CSI_AFE_TRIM_CONTROL	0xe4
+#define MRFLD_PCI_CSI_DEADLINE_CONTROL	0xec
+#define MRFLD_PCI_CSI_RCOMP_CONTROL	0xf4
+
+/* Select Arasan (legacy)/Intel input system */
+#define MRFLD_PCI_CSI_CONTROL_PARPATHEN	BIT(24)
+/* Enable CSI interface (ANN B0/K0) */
+#define MRFLD_PCI_CSI_CONTROL_CSI_READY	BIT(25)
+
+/*
+ * Enables the combining of adjacent 32-byte read requests to the same
+ * cache line. When cleared, each 32-byte read request is sent as a
+ * separate request on the IB interface.
+ */
+#define MRFLD_PCI_I_CONTROL_ENABLE_READ_COMBINING	0x1
+
+/*
+ * Register: MRFLD_PCI_CSI_RCOMP_CONTROL
+ * If cleared, the high speed clock going to the digital logic is gated when
+ * RCOMP update is happening. The clock is gated for a minimum of 100 nsec.
+ * If this bit is set, then the high speed clock is not gated during the
+ * update cycle.
+ */
+#define MRFLD_PCI_CSI_HS_OVR_CLK_GATE_ON_UPDATE		0x800000
+
+/*
+ * Enables the combining of adjacent 32-byte write requests to the same
+ * cache line. When cleared, each 32-byte write request is sent as a
+ * separate request on the IB interface.
+ */
+#define MRFLD_PCI_I_CONTROL_ENABLE_WRITE_COMBINING	0x2
+
+#define MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK		0xc
+
+#define MRFLD_PCI_CSI1_HSRXCLKTRIM		0x2
+#define MRFLD_PCI_CSI1_HSRXCLKTRIM_SHIFT	16
+#define MRFLD_PCI_CSI2_HSRXCLKTRIM		0x3
+#define MRFLD_PCI_CSI2_HSRXCLKTRIM_SHIFT	24
+#define MRFLD_PCI_CSI3_HSRXCLKTRIM		0x2
+#define MRFLD_PCI_CSI3_HSRXCLKTRIM_SHIFT	28
+#define MRFLD_PCI_CSI_HSRXCLKTRIM_MASK		0xf
+
+/*
+ * This register is IUINT MMIO register, it is used to select the CSI
+ * receiver backend.
+ * 1: SH CSI backend
+ * 0: Arasan CSI backend
+ */
+#define MRFLD_CSI_RECEIVER_SELECTION_REG       0x8081c
+
+#define MRFLD_INTR_CLEAR_REG		       0x50c
+#define MRFLD_INTR_STATUS_REG		       0x508
+#define MRFLD_INTR_ENABLE_REG		       0x510
+
+#define MRFLD_MAX_ZOOM_FACTOR	1024
+
+/* MRFLD ISP POWER related */
+#define MRFLD_ISPSSPM0         0x39
+#define MRFLD_ISPSSPM0_ISPSSC_OFFSET   0
+#define MRFLD_ISPSSPM0_ISPSSS_OFFSET   24
+#define MRFLD_ISPSSPM0_ISPSSC_MASK     0x3
+#define MRFLD_ISPSSPM0_IUNIT_POWER_ON  0
+#define MRFLD_ISPSSPM0_IUNIT_POWER_OFF 0x3
+#define MRFLD_ISPSSDVFS			0x13F
+#define MRFLD_BIT0			0x0001
+#define MRFLD_BIT1			0x0002
+
+/* MRFLD CSI lane configuration related */
+#define MRFLD_PORT_CONFIG_NUM  8
+#define MRFLD_PORT_NUM         3
+#define MRFLD_PORT1_ENABLE_SHIFT       0
+#define MRFLD_PORT2_ENABLE_SHIFT       1
+#define MRFLD_PORT3_ENABLE_SHIFT       2
+#define MRFLD_PORT1_LANES_SHIFT        3
+#define MRFLD_PORT2_LANES_SHIFT        7
+#define MRFLD_PORT3_LANES_SHIFT        8
+#define MRFLD_PORT_CONFIG_MASK 0x000f03ff
+#define MRFLD_PORT_CONFIGCODE_SHIFT    16
+#define MRFLD_ALL_CSI_PORTS_OFF_MASK   0x7
+
+#define CHV_PORT3_LANES_SHIFT		9
+#define CHV_PORT_CONFIG_MASK		0x1f07ff
+
+#define ISPSSPM1				0x3a
+#define ISP_FREQ_STAT_MASK			(0x1f << ISP_FREQ_STAT_OFFSET)
+#define ISP_REQ_FREQ_MASK			0x1f
+#define ISP_FREQ_VALID_MASK			(0x1 << ISP_FREQ_VALID_OFFSET)
+#define ISP_FREQ_STAT_OFFSET			0x18
+#define ISP_REQ_GUAR_FREQ_OFFSET		0x8
+#define ISP_REQ_FREQ_OFFSET			0x0
+#define ISP_FREQ_VALID_OFFSET			0x7
+#define ISP_FREQ_RULE_ANY			0x0
+
+#define ISP_FREQ_457MHZ				0x1C9
+#define ISP_FREQ_400MHZ				0x190
+#define ISP_FREQ_356MHZ				0x164
+#define ISP_FREQ_320MHZ				0x140
+#define ISP_FREQ_266MHZ				0x10a
+#define ISP_FREQ_200MHZ				0xc8
+#define ISP_FREQ_100MHZ				0x64
+
+#define HPLL_FREQ_800MHZ			0x320
+#define HPLL_FREQ_1600MHZ			0x640
+#define HPLL_FREQ_2000MHZ			0x7D0
+
+#define CCK_FUSE_REG_0			0x08
+#define CCK_FUSE_HPLL_FREQ_MASK		0x03
+
+#if defined(ISP2401)
+#define ISP_FREQ_MAX	ISP_FREQ_320MHZ
+#else
+#define ISP_FREQ_MAX	ISP_FREQ_400MHZ
+#endif
+
+/* ISP2401 CSI2+ receiver delay settings */
+#define CSI2_PORT_A_BASE					0xC0000
+#define CSI2_PORT_B_BASE					0xC2000
+#define CSI2_PORT_C_BASE					0xC4000
+
+#define CSI2_LANE_CL_BASE					0x418
+#define CSI2_LANE_D0_BASE					0x420
+#define CSI2_LANE_D1_BASE					0x428
+#define CSI2_LANE_D2_BASE					0x430
+#define CSI2_LANE_D3_BASE					0x438
+
+#define CSI2_REG_RX_CSI_DLY_CNT_TERMEN				0
+#define CSI2_REG_RX_CSI_DLY_CNT_SETTLE				0x4
+
+#define CSI2_PORT_A_RX_CSI_DLY_CNT_TERMEN_CLANE			0xC0418
+#define CSI2_PORT_A_RX_CSI_DLY_CNT_SETTLE_CLANE			0xC041C
+#define CSI2_PORT_A_RX_CSI_DLY_CNT_TERMEN_DLANE0		0xC0420
+#define CSI2_PORT_A_RX_CSI_DLY_CNT_SETTLE_DLANE0		0xC0424
+#define CSI2_PORT_A_RX_CSI_DLY_CNT_TERMEN_DLANE1		0xC0428
+#define CSI2_PORT_A_RX_CSI_DLY_CNT_SETTLE_DLANE1		0xC042C
+#define CSI2_PORT_A_RX_CSI_DLY_CNT_TERMEN_DLANE2		0xC0430
+#define CSI2_PORT_A_RX_CSI_DLY_CNT_SETTLE_DLANE2		0xC0434
+#define CSI2_PORT_A_RX_CSI_DLY_CNT_TERMEN_DLANE3		0xC0438
+#define CSI2_PORT_A_RX_CSI_DLY_CNT_SETTLE_DLANE3		0xC043C
+
+#define CSI2_PORT_B_RX_CSI_DLY_CNT_TERMEN_CLANE			0xC2418
+#define CSI2_PORT_B_RX_CSI_DLY_CNT_SETTLE_CLANE			0xC241C
+#define CSI2_PORT_B_RX_CSI_DLY_CNT_TERMEN_DLANE0		0xC2420
+#define CSI2_PORT_B_RX_CSI_DLY_CNT_SETTLE_DLANE0		0xC2424
+#define CSI2_PORT_B_RX_CSI_DLY_CNT_TERMEN_DLANE1		0xC2428
+#define CSI2_PORT_B_RX_CSI_DLY_CNT_SETTLE_DLANE1		0xC242C
+
+#define CSI2_PORT_C_RX_CSI_DLY_CNT_TERMEN_CLANE			0xC4418
+#define CSI2_PORT_C_RX_CSI_DLY_CNT_SETTLE_CLANE			0xC441C
+#define CSI2_PORT_C_RX_CSI_DLY_CNT_TERMEN_DLANE0		0xC4420
+#define CSI2_PORT_C_RX_CSI_DLY_CNT_SETTLE_DLANE0		0xC4424
+#define CSI2_PORT_C_RX_CSI_DLY_CNT_TERMEN_DLANE1		0xC4428
+#define CSI2_PORT_C_RX_CSI_DLY_CNT_SETTLE_DLANE1		0xC442C
+
+#define DMA_BURST_SIZE_REG					0xCD408
+
+#define ISP_DFS_TRY_TIMES	2
+
+#endif /* ATOMISP_REGS_H */