Revert "Staging: olpc_dcon: Remove obsolete driver"

This reverts commit 82ef33af9dd30075adbd9f3dd161b606b8ba88ac.  It turns
out these machines are still out there, and the original patch broke
them.  So revert it, adding back the driver, so people's machines still
work properly.

Reported-by: James Cameron <quozl@laptop.org>
Cc: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 111 insertions, 0 deletions

diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h
new file mode 100644
index 000000000000..215e7ec4dea2
--- /dev/null
+++ b/drivers/staging/olpc_dcon/olpc_dcon.h
@@ -0,0 +1,111 @@
+#ifndef OLPC_DCON_H_
+#define OLPC_DCON_H_
+
+#include <linux/notifier.h>
+#include <linux/workqueue.h>
+
+/* DCON registers */
+
+#define DCON_REG_ID		 0
+#define DCON_REG_MODE		 1
+
+#define MODE_PASSTHRU	(1<<0)
+#define MODE_SLEEP	(1<<1)
+#define MODE_SLEEP_AUTO	(1<<2)
+#define MODE_BL_ENABLE	(1<<3)
+#define MODE_BLANK	(1<<4)
+#define MODE_CSWIZZLE	(1<<5)
+#define MODE_COL_AA	(1<<6)
+#define MODE_MONO_LUMA	(1<<7)
+#define MODE_SCAN_INT	(1<<8)
+#define MODE_CLOCKDIV	(1<<9)
+#define MODE_DEBUG	(1<<14)
+#define MODE_SELFTEST	(1<<15)
+
+#define DCON_REG_HRES		0x2
+#define DCON_REG_HTOTAL		0x3
+#define DCON_REG_HSYNC_WIDTH	0x4
+#define DCON_REG_VRES		0x5
+#define DCON_REG_VTOTAL		0x6
+#define DCON_REG_VSYNC_WIDTH	0x7
+#define DCON_REG_TIMEOUT	0x8
+#define DCON_REG_SCAN_INT	0x9
+#define DCON_REG_BRIGHT		0xa
+#define DCON_REG_MEM_OPT_A	0x41
+#define DCON_REG_MEM_OPT_B	0x42
+
+/* Load Delay Locked Loop (DLL) settings for clock delay */
+#define MEM_DLL_CLOCK_DELAY	(1<<0)
+/* Memory controller power down function */
+#define MEM_POWER_DOWN		(1<<8)
+/* Memory controller software reset */
+#define MEM_SOFT_RESET		(1<<0)
+
+/* Status values */
+
+#define DCONSTAT_SCANINT	0
+#define DCONSTAT_SCANINT_DCON	1
+#define DCONSTAT_DISPLAYLOAD	2
+#define DCONSTAT_MISSED		3
+
+/* Source values */
+
+#define DCON_SOURCE_DCON        0
+#define DCON_SOURCE_CPU         1
+
+/* Interrupt */
+#define DCON_IRQ                6
+
+struct dcon_priv {
+	struct i2c_client *client;
+	struct fb_info *fbinfo;
+	struct backlight_device *bl_dev;
+
+	wait_queue_head_t waitq;
+	struct work_struct switch_source;
+	struct notifier_block reboot_nb;
+
+	/* Shadow register for the DCON_REG_MODE register */
+	u8 disp_mode;
+
+	/* The current backlight value - this saves us some smbus traffic */
+	u8 bl_val;
+
+	/* Current source, initialized at probe time */
+	int curr_src;
+
+	/* Desired source */
+	int pending_src;
+
+	/* Variables used during switches */
+	bool switched;
+	ktime_t irq_time;
+	ktime_t load_time;
+
+	/* Current output type; true == mono, false == color */
+	bool mono;
+	bool asleep;
+	/* This get set while controlling fb blank state from the driver */
+	bool ignore_fb_events;
+};
+
+struct dcon_platform_data {
+	int (*init)(struct dcon_priv *);
+	void (*bus_stabilize_wiggle)(void);
+	void (*set_dconload)(int);
+	int (*read_status)(u8 *);
+};
+
+#include <linux/interrupt.h>
+
+irqreturn_t dcon_interrupt(int irq, void *id);
+
+#ifdef CONFIG_FB_OLPC_DCON_1
+extern struct dcon_platform_data dcon_pdata_xo_1;
+#endif
+
+#ifdef CONFIG_FB_OLPC_DCON_1_5
+extern struct dcon_platform_data dcon_pdata_xo_1_5;
+#endif
+
+#endif