Merge tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.12-rc1.

  Lots of good stuff here, after many many many attempts, the kernel
  finally has a working typeC interface, many thanks to Heikki and
  Guenter and others who have taken the time to get this merged. It
  wasn't an easy path for them at all.

  There's also a staging driver that uses this new api, which is why
  it's coming in through this tree.

  Along with that, there's the usual huge number of changes for gadget
  drivers, xhci, and other stuff. Johan also finally refactored pretty
  much every driver that was looking at USB endpoints to do it in a
  common way, which will help prevent any "badly-formed" devices from
  causing problems in drivers. That too wasn't a simple task.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  staging: typec: Fairchild FUSB302 Type-c chip driver
  staging: typec: Type-C Port Controller Interface driver (tcpci)
  staging: typec: USB Type-C Port Manager (tcpm)
  usb: host: xhci: remove #ifdef around PM functions
  usb: musb: don't mark of_dev_auxdata as initdata
  usb: misc: legousbtower: Fix buffers on stack
  USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"
  usb: Make sure usb/phy/of gets built-in
  USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h
  usb: host: xhci: print correct command ring address
  usb: host: xhci: delete sp_dma_buffers for scratchpad
  usb: host: xhci: using correct specification chapter reference for DCBAAP
  xhci: switch to pci_alloc_irq_vectors
  usb: host: xhci-plat: set resume_quirk() for R-Car controllers
  usb: host: xhci-plat: add resume_quirk()
  usb: host: xhci-plat: enable clk in resume timing
  usb: host: plat: Enable xHCI plat runtime PM
  USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
  USB: serial: constify static arrays
  usb: fix some references for /proc/bus/usb
  ...

1 files changed, 249 insertions, 0 deletions

diff --git a/drivers/staging/typec/pd_vdo.h b/drivers/staging/typec/pd_vdo.h
new file mode 100644
index 000000000000..dba172e0e0d1
--- /dev/null
+++ b/drivers/staging/typec/pd_vdo.h
@@ -0,0 +1,249 @@
+/*
+ * Copyright 2015-2017 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_USB_PD_VDO_H
+#define __LINUX_USB_PD_VDO_H
+
+#include "pd.h"
+
+/*
+ * VDO : Vendor Defined Message Object
+ * VDM object is minimum of VDM header + 6 additional data objects.
+ */
+
+/*
+ * VDM header
+ * ----------
+ * <31:16>  :: SVID
+ * <15>     :: VDM type ( 1b == structured, 0b == unstructured )
+ * <14:13>  :: Structured VDM version (can only be 00 == 1.0 currently)
+ * <12:11>  :: reserved
+ * <10:8>   :: object position (1-7 valid ... used for enter/exit mode only)
+ * <7:6>    :: command type (SVDM only?)
+ * <5>      :: reserved (SVDM), command type (UVDM)
+ * <4:0>    :: command
+ */
+#define VDO_MAX_SIZE 7
+#define VDO(vid, type, custom)				\
+	(((vid) << 16) |				\
+	 ((type) << 15) |				\
+	 ((custom) & 0x7FFF))
+
+#define VDO_SVDM_TYPE		(1 << 15)
+#define VDO_SVDM_VERS(x)	((x) << 13)
+#define VDO_OPOS(x)		((x) << 8)
+#define VDO_CMDT(x)		((x) << 6)
+#define VDO_OPOS_MASK		VDO_OPOS(0x7)
+#define VDO_CMDT_MASK		VDO_CMDT(0x3)
+
+#define CMDT_INIT		0
+#define CMDT_RSP_ACK		1
+#define CMDT_RSP_NAK		2
+#define CMDT_RSP_BUSY		3
+
+/* reserved for SVDM ... for Google UVDM */
+#define VDO_SRC_INITIATOR	(0 << 5)
+#define VDO_SRC_RESPONDER	(1 << 5)
+
+#define CMD_DISCOVER_IDENT	1
+#define CMD_DISCOVER_SVID	2
+#define CMD_DISCOVER_MODES	3
+#define CMD_ENTER_MODE		4
+#define CMD_EXIT_MODE		5
+#define CMD_ATTENTION		6
+
+#define VDO_CMD_VENDOR(x)    (((10 + (x)) & 0x1f))
+
+/* ChromeOS specific commands */
+#define VDO_CMD_VERSION		VDO_CMD_VENDOR(0)
+#define VDO_CMD_SEND_INFO	VDO_CMD_VENDOR(1)
+#define VDO_CMD_READ_INFO	VDO_CMD_VENDOR(2)
+#define VDO_CMD_REBOOT		VDO_CMD_VENDOR(5)
+#define VDO_CMD_FLASH_ERASE	VDO_CMD_VENDOR(6)
+#define VDO_CMD_FLASH_WRITE	VDO_CMD_VENDOR(7)
+#define VDO_CMD_ERASE_SIG	VDO_CMD_VENDOR(8)
+#define VDO_CMD_PING_ENABLE	VDO_CMD_VENDOR(10)
+#define VDO_CMD_CURRENT		VDO_CMD_VENDOR(11)
+#define VDO_CMD_FLIP		VDO_CMD_VENDOR(12)
+#define VDO_CMD_GET_LOG		VDO_CMD_VENDOR(13)
+#define VDO_CMD_CCD_EN		VDO_CMD_VENDOR(14)
+
+#define PD_VDO_VID(vdo)		((vdo) >> 16)
+#define PD_VDO_SVDM(vdo)	(((vdo) >> 15) & 1)
+#define PD_VDO_OPOS(vdo)	(((vdo) >> 8) & 0x7)
+#define PD_VDO_CMD(vdo)		((vdo) & 0x1f)
+#define PD_VDO_CMDT(vdo)	(((vdo) >> 6) & 0x3)
+
+/*
+ * SVDM Identity request -> response
+ *
+ * Request is simply properly formatted SVDM header
+ *
+ * Response is 4 data objects:
+ * [0] :: SVDM header
+ * [1] :: Identitiy header
+ * [2] :: Cert Stat VDO
+ * [3] :: (Product | Cable) VDO
+ * [4] :: AMA VDO
+ *
+ */
+#define VDO_INDEX_HDR		0
+#define VDO_INDEX_IDH		1
+#define VDO_INDEX_CSTAT		2
+#define VDO_INDEX_CABLE		3
+#define VDO_INDEX_PRODUCT	3
+#define VDO_INDEX_AMA		4
+
+/*
+ * SVDM Identity Header
+ * --------------------
+ * <31>     :: data capable as a USB host
+ * <30>     :: data capable as a USB device
+ * <29:27>  :: product type
+ * <26>     :: modal operation supported (1b == yes)
+ * <25:16>  :: Reserved, Shall be set to zero
+ * <15:0>   :: USB-IF assigned VID for this cable vendor
+ */
+#define IDH_PTYPE_UNDEF		0
+#define IDH_PTYPE_HUB		1
+#define IDH_PTYPE_PERIPH	2
+#define IDH_PTYPE_PCABLE	3
+#define IDH_PTYPE_ACABLE	4
+#define IDH_PTYPE_AMA		5
+
+#define VDO_IDH(usbh, usbd, ptype, is_modal, vid)		\
+	((usbh) << 31 | (usbd) << 30 | ((ptype) & 0x7) << 27	\
+	 | (is_modal) << 26 | ((vid) & 0xffff))
+
+#define PD_IDH_PTYPE(vdo)	(((vdo) >> 27) & 0x7)
+#define PD_IDH_VID(vdo)		((vdo) & 0xffff)
+#define PD_IDH_MODAL_SUPP(vdo)	((vdo) & (1 << 26))
+
+/*
+ * Cert Stat VDO
+ * -------------
+ * <31:0>  : USB-IF assigned XID for this cable
+ */
+#define PD_CSTAT_XID(vdo)	(vdo)
+
+/*
+ * Product VDO
+ * -----------
+ * <31:16> : USB Product ID
+ * <15:0>  : USB bcdDevice
+ */
+#define VDO_PRODUCT(pid, bcd)	(((pid) & 0xffff) << 16 | ((bcd) & 0xffff))
+#define PD_PRODUCT_PID(vdo)	(((vdo) >> 16) & 0xffff)
+
+/*
+ * Cable VDO
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:20> :: Reserved, Shall be set to zero
+ * <19:18> :: type-C to Type-A/B/C (00b == A, 01 == B, 10 == C)
+ * <17>    :: Type-C to Plug/Receptacle (0b == plug, 1b == receptacle)
+ * <16:13> :: cable latency (0001 == <10ns(~1m length))
+ * <12:11> :: cable termination type (11b == both ends active VCONN req)
+ * <10>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <9>     :: SSTX2 Directionality support
+ * <8>     :: SSRX1 Directionality support
+ * <7>     :: SSRX2 Directionality support
+ * <6:5>   :: Vbus current handling capability
+ * <4>     :: Vbus through cable (0b == no, 1b == yes)
+ * <3>     :: SOP" controller present? (0b == no, 1b == yes)
+ * <2:0>   :: USB SS Signaling support
+ */
+#define CABLE_ATYPE		0
+#define CABLE_BTYPE		1
+#define CABLE_CTYPE		2
+#define CABLE_PLUG		0
+#define CABLE_RECEPTACLE	1
+#define CABLE_CURR_1A5		0
+#define CABLE_CURR_3A		1
+#define CABLE_CURR_5A		2
+#define CABLE_USBSS_U2_ONLY	0
+#define CABLE_USBSS_U31_GEN1	1
+#define CABLE_USBSS_U31_GEN2	2
+#define VDO_CABLE(hw, fw, cbl, gdr, lat, term, tx1d, tx2d, rx1d, rx2d, cur,\
+		  vps, sopp, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18	\
+	 | (gdr) << 17 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11	\
+	 | (tx1d) << 10 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7	\
+	 | ((cur) & 0x3) << 5 | (vps) << 4 | (sopp) << 3		\
+	 | ((usbss) & 0x7))
+
+/*
+ * AMA VDO
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:12> :: Reserved, Shall be set to zero
+ * <11>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <10>    :: SSTX2 Directionality support
+ * <9>     :: SSRX1 Directionality support
+ * <8>     :: SSRX2 Directionality support
+ * <7:5>   :: Vconn power
+ * <4>     :: Vconn power required
+ * <3>     :: Vbus power required
+ * <2:0>   :: USB SS Signaling support
+ */
+#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24			\
+	 | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8	\
+	 | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3		\
+	 | ((usbss) & 0x7))
+
+#define PD_VDO_AMA_VCONN_REQ(vdo)	(((vdo) >> 4) & 1)
+#define PD_VDO_AMA_VBUS_REQ(vdo)	(((vdo) >> 3) & 1)
+
+#define AMA_VCONN_PWR_1W	0
+#define AMA_VCONN_PWR_1W5	1
+#define AMA_VCONN_PWR_2W	2
+#define AMA_VCONN_PWR_3W	3
+#define AMA_VCONN_PWR_4W	4
+#define AMA_VCONN_PWR_5W	5
+#define AMA_VCONN_PWR_6W	6
+#define AMA_USBSS_U2_ONLY	0
+#define AMA_USBSS_U31_GEN1	1
+#define AMA_USBSS_U31_GEN2	2
+#define AMA_USBSS_BBONLY	3
+
+/*
+ * SVDM Discover SVIDs request -> response
+ *
+ * Request is properly formatted VDM Header with discover SVIDs command.
+ * Response is a set of SVIDs of all all supported SVIDs with all zero's to
+ * mark the end of SVIDs.  If more than 12 SVIDs are supported command SHOULD be
+ * repeated.
+ */
+#define VDO_SVID(svid0, svid1)	(((svid0) & 0xffff) << 16 | ((svid1) & 0xffff))
+#define PD_VDO_SVID_SVID0(vdo)	((vdo) >> 16)
+#define PD_VDO_SVID_SVID1(vdo)	((vdo) & 0xffff)
+
+/* USB-IF SIDs */
+#define USB_SID_PD		0xff00 /* power delivery */
+#define USB_SID_DISPLAYPORT	0xff01
+#define USB_SID_MHL		0xff02	/* Mobile High-Definition Link */
+
+/* VDM command timeouts (in ms) */
+
+#define PD_T_VDM_UNSTRUCTURED	500
+#define PD_T_VDM_BUSY		100
+#define PD_T_VDM_WAIT_MODE_E	100
+#define PD_T_VDM_SNDR_RSP	30
+#define PD_T_VDM_E_MODE		25
+#define PD_T_VDM_RCVR_RSP	15
+
+#endif /* __LINUX_USB_PD_VDO_H */