staging: unisys: visorbus: remove POSTCODE from visorchipset_init

Remove POSTCODEs from visorchipset_init and replace them with dev_err when
needed.

Since there are no more POSTCODEs in the code, we can get rid of the data
in the header file as well.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 1 insertions, 107 deletions

diff --git a/drivers/staging/unisys/visorbus/visorchipset.c b/drivers/staging/unisys/visorbus/visorchipset.c
index bf4ddebca68d..e098526372cb 100644
--- a/drivers/staging/unisys/visorbus/visorchipset.c
+++ b/drivers/staging/unisys/visorbus/visorchipset.c
@@ -1861,8 +1861,6 @@ visorchipset_init(struct acpi_device *acpi_device)
 	schedule_delayed_work(&chipset_dev->periodic_controlvm_work,
 			      chipset_dev->poll_jiffies);
 
-	POSTCODE_LINUX(CHIPSET_INIT_SUCCESS_PC, 0, 0, DIAG_SEVERITY_PRINT);
-
 	err = visorbus_init();
 	if (err < 0)
 		goto error_cancel_work;
@@ -1883,7 +1881,7 @@ error_free_chipset_dev:
 	kfree(chipset_dev);
 
 error:
-	POSTCODE_LINUX(CHIPSET_INIT_FAILURE_PC, 0, err, DIAG_SEVERITY_ERR);
+	dev_err(&acpi_device->dev, "failed with error %d\n", err);
 	return err;
 }
 
diff --git a/drivers/staging/unisys/visorbus/vmcallinterface.h b/drivers/staging/unisys/visorbus/vmcallinterface.h
index 1440cc8caf4c..cc70e1b16bda 100644
--- a/drivers/staging/unisys/visorbus/vmcallinterface.h
+++ b/drivers/staging/unisys/visorbus/vmcallinterface.h
@@ -15,31 +15,6 @@
 #ifndef __VMCALLINTERFACE_H__
 #define __VMCALLINTERFACE_H__
 
-/*
- * This file contains all structures needed to support the VMCALLs for s-Par
- * Virtualization.  The VMCALLs are provided by Monitor and used by s-Par
- * drivers running in a Linux guest partition.
- */
-static inline unsigned long
-__unisys_extended_vmcall_gnuc(unsigned long long tuple,
-			      unsigned long long reg_ebx,
-			      unsigned long long reg_ecx,
-			      unsigned long long reg_edx)
-{
-	unsigned long result = 0;
-	unsigned int cpuid_eax, cpuid_ebx, cpuid_ecx, cpuid_edx;
-
-	cpuid(0x00000001, &cpuid_eax, &cpuid_ebx, &cpuid_ecx, &cpuid_edx);
-	if (!(cpuid_ecx & 0x80000000))
-		return -EPERM;
-
-	__asm__ __volatile__(".byte 0x00f, 0x001, 0x0c1" : "=a"(result) :
-		"a"(tuple), "b"(reg_ebx), "c"(reg_ecx), "d"(reg_edx));
-	return result;
-}
-
-/* define subsystem number for AppOS, used in uislib driver  */
-#define MDS_APPOS 0x4000000000000000L /* subsystem = 62 - AppOS */
 enum vmcall_monitor_interface_method_tuple { /* VMCALL identification tuples  */
 	    /* Note: when a new VMCALL is added:
 	     * - the 1st 2 hex digits correspond to one of the
@@ -53,13 +28,6 @@ enum vmcall_monitor_interface_method_tuple { /* VMCALL identification tuples  */
 	     */
 	/* used by all Guests, not just IO */
 	VMCALL_CONTROLVM_ADDR = 0x0501,
-	/* Allow caller to query virtual time offset */
-	VMCALL_QUERY_GUEST_VIRTUAL_TIME_OFFSET = 0x0708,
-	/* LOGEVENT Post Code (RDX) with specified subsystem mask */
-	/* (RCX - monitor_subsystems.h) and severity (RDX) */
-	VMCALL_POST_CODE_LOGEVENT = 0x070B,
-	/* Allow ULTRA_SERVICE_CAPABILITY_TIME capable guest to make VMCALL */
-	VMCALL_UPDATE_PHYSICAL_TIME = 0x0a02
 };
 
 enum vmcall_result {
@@ -71,11 +39,7 @@ enum vmcall_result {
 	VMCALL_RESULT_DEVICE_NOT_READY = 5
 };
 
-#define unisys_extended_vmcall(tuple, reg_ebx, reg_ecx, reg_edx) \
-	__unisys_extended_vmcall_gnuc(tuple, reg_ebx, reg_ecx, reg_edx)
-
 /* Structures for IO VMCALLs */
-
 /* Parameters to VMCALL_CONTROLVM_ADDR interface */
 struct vmcall_io_controlvm_addr_params {
 	/* The Guest-relative physical address of the ControlVm channel. */
@@ -87,72 +51,4 @@ struct vmcall_io_controlvm_addr_params {
 	u8 unused[4];		/* Unused Bytes in the 64-Bit Aligned Struct */
 } __packed;
 
-/******* INFO ON ISSUE_POSTCODE_LINUX() BELOW *******/
-enum driver_pc {		/* POSTCODE driver identifier tuples */
-	/* visorbus driver files */
-	VISOR_BUS_PC = 0xF0,
-	VISOR_BUS_PC_visorbus_main_c = 0xFF,
-	VISOR_BUS_PC_visorchipset_c = 0xFE,
-};
-
-enum event_pc {			/* POSTCODE event identifier tuples */
-	BUS_CREATE_ENTRY_PC = 0x001,
-	BUS_CREATE_FAILURE_PC = 0x002,
-	BUS_CREATE_EXIT_PC = 0x003,
-	BUS_CONFIGURE_ENTRY_PC = 0x004,
-	BUS_CONFIGURE_FAILURE_PC = 0x005,
-	BUS_CONFIGURE_EXIT_PC = 0x006,
-	CHIPSET_INIT_ENTRY_PC = 0x007,
-	CHIPSET_INIT_SUCCESS_PC = 0x008,
-	CHIPSET_INIT_FAILURE_PC = 0x009,
-	CHIPSET_INIT_EXIT_PC = 0x00A,
-	CONTROLVM_INIT_FAILURE_PC = 0x00B,
-	DEVICE_CREATE_ENTRY_PC = 0x00C,
-	DEVICE_CREATE_FAILURE_PC = 0x00D,
-	DEVICE_CREATE_SUCCESS_PC = 0x00E,
-	DEVICE_CREATE_EXIT_PC = 0x00F,
-	DEVICE_ADD_PC = 0x010,
-	DEVICE_REGISTER_FAILURE_PC = 0x011,
-	DEVICE_CHANGESTATE_FAILURE_PC = 0x012,
-	DRIVER_ENTRY_PC = 0x013,
-	DRIVER_EXIT_PC = 0x014,
-	MALLOC_FAILURE_PC = 0x015,
-	CRASH_DEV_ENTRY_PC = 0x016,
-	CRASH_DEV_EXIT_PC = 0x017,
-	CRASH_DEV_RD_BUS_FAILURE_PC = 0x018,
-	CRASH_DEV_RD_DEV_FAILURE_PC = 0x019,
-	CRASH_DEV_BUS_NULL_FAILURE_PC = 0x01A,
-	CRASH_DEV_DEV_NULL_FAILURE_PC = 0x01B,
-	CRASH_DEV_CTRL_RD_FAILURE_PC = 0x01C,
-	CRASH_DEV_COUNT_FAILURE_PC = 0x01D,
-	SAVE_MSG_BUS_FAILURE_PC = 0x01E,
-	SAVE_MSG_DEV_FAILURE_PC = 0x01F,
-};
-
-/* Write a 64-bit value to the hypervisor's log file
- * POSTCODE_LINUX generates a value in the form 0xAABBBCCCDDDDEEEE where
- *	A is an identifier for the file logging the postcode
- *	B is an identifier for the event logging the postcode
- *	C is the line logging the postcode
- *	D is additional information the caller wants to log
- *	E is additional information the caller wants to log
- * Please also note that the resulting postcode is in hex, so if you are
- * searching for the __LINE__ number, convert it first to decimal.  The line
- * number combined with driver and type of call, will allow you to track down
- * exactly what line an error occurred on, or where the last driver
- * entered/exited from.
- */
-
-#define POSTCODE_LINUX(EVENT_PC, pc16bit1, pc16bit2, severity) \
-do { \
-	unsigned long long post_code_temp; \
-	post_code_temp = (((u64)CURRENT_FILE_PC) << 56) | \
-		(((u64)EVENT_PC) << 44) | \
-		((((u64)__LINE__) & 0xFFF) << 32) | \
-		((((u64)pc16bit1) & 0xFFFF) << 16) | \
-		(((u64)pc16bit2) & 0xFFFF); \
-	unisys_extended_vmcall(VMCALL_POST_CODE_LOGEVENT, severity, \
-			       MDS_APPOS, post_code_temp); \
-} while (0)
-
 #endif /* __VMCALLINTERFACE_H__ */