Merge tag 'iio-fixes-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.1 cycle.

Mostly the usual mix, but the bme680 SPI fix is much larger than
I would normally like.  It never worked, but conversely we have
code there that would make people expect it to do so.  Chances
of side effects are very low.

* core
  - Fix an uninitialised bitaks that could potentially result in random
    channels being enabled on startup.
* ad7192
  - Fix a wrong channel address for ad7193.
* ade7854
  - Fix a typo that results in returning peak voltage instead of peak current.
* at91
  - Fix a potential hang due to a race on interrupt setting.
* bmg160
  - Fix scale factor of temperature
* bme680
  - Fix scale factor of temperature
  - Fix SPI read interface.  This is a bit of a large patch as it seems
    that it never worked.  It's major for this driver but is unlikely to
    have any negative side effects.
* kxcjk1013
  - restore sensor range setting after resume.
* mcp4725
  - make sure to store powerdown bits when storing to the eeprom.
* mpu3050
  - Mask the chip ID correctly as we have chips that set the bother bits of
    this register.
* sgp30
  - Fix a missing Kconfig block that means the driver doesn't actually ever
    get built.

* tag 'iio-fixes-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: core: fix a possible circular locking dependency
  iio: ad_sigma_delta: select channel when reading register
  iio: pms7003: select IIO_TRIGGERED_BUFFER
  iio: cros_ec: Fix the maths for gyro scale calculation
  iio: adc: xilinx: prevent touching unclocked h/w on remove
  iio: adc: xilinx: fix potential use-after-free on probe
  iio: adc: xilinx: fix potential use-after-free on remove
  iio: dac: mcp4725: add missing powerdown bits in store eeprom
  io: accel: kxcjk1013: restore the range after resume.
  iio:chemical:bme680: Fix SPI read interface
  iio:chemical:bme680: Fix, report temperature in millidegrees
  iio: chemical: fix missing Kconfig block for sgp30
  iio: adc: at91: disable adc channel interrupt in timeout case
  iio: gyro: mpu3050: fix chip ID reading
  iio: Fix scan mask selection
  staging: iio: ad7192: Fix ad7193 channel address
  iio/gyro/bmg160: Use millidegrees for temperature scale
  Staging: iio: meter: fixed typo

2 files changed, 5 insertions, 5 deletions

diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index acdbc07fd259..2fc8bc22b57b 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -109,10 +109,10 @@
 #define AD7192_CH_AIN3		BIT(6) /* AIN3 - AINCOM */
 #define AD7192_CH_AIN4		BIT(7) /* AIN4 - AINCOM */
 
-#define AD7193_CH_AIN1P_AIN2M	0x000  /* AIN1(+) - AIN2(-) */
-#define AD7193_CH_AIN3P_AIN4M	0x001  /* AIN3(+) - AIN4(-) */
-#define AD7193_CH_AIN5P_AIN6M	0x002  /* AIN5(+) - AIN6(-) */
-#define AD7193_CH_AIN7P_AIN8M	0x004  /* AIN7(+) - AIN8(-) */
+#define AD7193_CH_AIN1P_AIN2M	0x001  /* AIN1(+) - AIN2(-) */
+#define AD7193_CH_AIN3P_AIN4M	0x002  /* AIN3(+) - AIN4(-) */
+#define AD7193_CH_AIN5P_AIN6M	0x004  /* AIN5(+) - AIN6(-) */
+#define AD7193_CH_AIN7P_AIN8M	0x008  /* AIN7(+) - AIN8(-) */
 #define AD7193_CH_TEMP		0x100 /* Temp senseor */
 #define AD7193_CH_AIN2P_AIN2M	0x200 /* AIN2(+) - AIN2(-) */
 #define AD7193_CH_AIN1		0x401 /* AIN1 - AINCOM */
diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c
index 029c3bf42d4d..07774c000c5a 100644
--- a/drivers/staging/iio/meter/ade7854.c
+++ b/drivers/staging/iio/meter/ade7854.c
@@ -269,7 +269,7 @@ static IIO_DEV_ATTR_VPEAK(0644,
 static IIO_DEV_ATTR_IPEAK(0644,
 		ade7854_read_32bit,
 		ade7854_write_32bit,
-		ADE7854_VPEAK);
+		ADE7854_IPEAK);
 static IIO_DEV_ATTR_APHCAL(0644,
 		ade7854_read_16bit,
 		ade7854_write_16bit,