diff options
| author | Lukas Wunner <lukas@wunner.de> | 2020-05-12 14:40:02 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-05-15 14:47:05 +0200 |
| commit | c150c0f362c1e51c0e3216c9912b85b71d00e70d (patch) | |
| tree | c0cefb23cc8355ab56cf9c988d9d475d739e7247 /drivers/tty/serial/atmel_serial.c | |
| parent | e0a851fe6b9b619527bd928aa93caaddd003f70c (diff) | |
serial: Allow uart_get_rs485_mode() to return errno
We're about to amend uart_get_rs485_mode() to support a GPIO pin for
rs485 bus termination. Retrieving the GPIO descriptor may fail, so
allow uart_get_rs485_mode() to return an errno and change all callers
to check for failure.
The GPIO descriptor is going to be stored in struct uart_port. Pass
that struct to uart_get_rs485_mode() in lieu of a struct device and
struct serial_rs485, both of which are directly accessible from struct
uart_port.
A few drivers call uart_get_rs485_mode() before setting the struct
device pointer in struct uart_port. Shuffle those calls around where
necessary.
[Heiko Stuebner did the ar933x_uart.c portion, hence his Signed-off-by.]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/271e814af4b0db3bffbbb74abf2b46b75add4516.1589285873.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/atmel_serial.c')
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 8d7080efad9b..e43471b33710 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -2491,8 +2491,6 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, atmel_init_property(atmel_port, pdev); atmel_set_ops(port); - uart_get_rs485_mode(&mpdev->dev, &port->rs485); - port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; port->ops = &atmel_pops; @@ -2506,6 +2504,10 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring)); + ret = uart_get_rs485_mode(port); + if (ret) + return ret; + /* for console, the clock could already be configured */ if (!atmel_port->clk) { atmel_port->clk = clk_get(&mpdev->dev, "usart"); |