usb: dwc2: Move gadget settings into core_params

Move the gadget devicetree settings into the core_params structure and
document them. Then set and check them in params.c, with the addition of
some helper functions, and remove the equivalent code in gadget.c.

Because these parameters came from the standalone s3c driver, they have
a fixed default value rather than an autodetected one. Preserve and
document this behavior to avoid any compatibility issues.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

1 files changed, 24 insertions, 8 deletions

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index b94d80810530..935ef365fece 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -418,6 +418,21 @@ enum dwc2_ep0_state {
  *			needed.
  *			0 - No (default)
  *			1 - Yes
+ * @g_dma:              If true, enables dma usage on the device. This
+ *                      setting is not auto-detected. It must be
+ *                      explicitly enabled (default: false).
+ * @g_rx_fifo_size:	The periodic rx fifo size for the device, in
+ *			DWORDS from 16-32768 (default: 2048 if
+ *			possible, otherwise autodetect).
+ * @g_np_tx_fifo_size:	The non-periodic tx fifo size for the device in
+ *			DWORDS from 16-32768 (default: 1024 if
+ *			possible, otherwise autodetect).
+ * @g_tx_fifo_size:	An array of TX fifo sizes in dedicated fifo
+ *			mode. Each value corresponds to one EP
+ *			starting from EP1 (max 15 values). Sizes are
+ *			in DWORDS with possible values from from
+ *			16-32768 (default: 256, 256, 256, 256, 768,
+ *			768, 768, 768, 0, 0, 0, 0, 0, 0, 0).
  *
  * The following parameters may be specified when starting the module. These
  * parameters define how the DWC_otg controller should be configured. A
@@ -475,6 +490,15 @@ struct dwc2_core_params {
 	int uframe_sched;
 	int external_id_pin_ctl;
 	int hibernation;
+
+	/*
+	 * The following parameters are *only* set via device
+	 * properties and cannot be set directly in this structure.
+	 */
+	bool g_dma;
+	u16 g_rx_fifo_size;
+	u16 g_np_tx_fifo_size;
+	u32 g_tx_fifo_size[MAX_EPS_CHANNELS];
 };
 
 /**
@@ -857,10 +881,6 @@ struct dwc2_hregs_backup {
  * @ep0_state:          EP0 control transfers state
  * @test_mode:          USB test mode requested by the host
  * @eps:                The endpoints being supplied to the gadget framework
- * @g_using_dma:          Indicate if dma usage is enabled
- * @g_rx_fifo_sz:         Contains rx fifo size value
- * @g_np_g_tx_fifo_sz:      Contains Non-Periodic tx fifo size value
- * @g_tx_fifo_sz:         Contains tx fifo size value per endpoints
  */
 struct dwc2_hsotg {
 	struct device *dev;
@@ -1008,10 +1028,6 @@ struct dwc2_hsotg {
 	unsigned int connected:1;
 	struct dwc2_hsotg_ep *eps_in[MAX_EPS_CHANNELS];
 	struct dwc2_hsotg_ep *eps_out[MAX_EPS_CHANNELS];
-	u32 g_using_dma;
-	u32 g_rx_fifo_sz;
-	u32 g_np_g_tx_fifo_sz;
-	u32 g_tx_fifo_sz[MAX_EPS_CHANNELS];
 #endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
 };