Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: Changes for v5.4 merge window

With only 45 non-merge commits, we have a small merge window from the
Gadget perspective.

The biggest change here is the addition of the Cadence USB3 DRD
Driver. All other changes are small, non-critical fixes or smaller new
features like the improvement to BESL handling in dwc3.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

* tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits)
  usb: gadget: net2280: Add workaround for AB chip Errata 11
  usb: gadget: net2280: Move all "ll" registers in one structure
  usb: dwc3: gadget: Workaround Mirosoft's BESL check
  usb:cdns3 Fix for stuck packets in on-chip OUT buffer.
  usb: cdns3: Add Cadence USB3 DRD Driver
  usb: common: Simplify usb_decode_get_set_descriptor function.
  usb: common: Patch simplify usb_decode_set_clear_feature function.
  usb: common: Separated decoding functions from dwc3 driver.
  dt-bindings: add binding for USBSS-DRD controller.
  usb: gadget: composite: Set recommended BESL values
  usb: dwc3: gadget: Set BESL config parameter
  usb: dwc3: Separate field holding multiple properties
  usb: gadget: Export recommended BESL values
  usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant
  usb: udc: lpc32xx: silence fall-through warning
  usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
  usb: udc: lpc32xx: remove set but not used 3 variables
  usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails
  usb: dwc3: st: Add of_dev_put() in probe function
  usb: dwc3: st: Add of_node_put() before return in probe function
  ...

12 files changed, 156 insertions, 104 deletions

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 76883ff4f5bb..d516e8d6cd7f 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -612,6 +612,7 @@ static int bos_desc(struct usb_composite_dev *cdev)
 	struct usb_ext_cap_descriptor	*usb_ext;
 	struct usb_dcd_config_params	dcd_config_params;
 	struct usb_bos_descriptor	*bos = cdev->req->buf;
+	unsigned int			besl = 0;
 
 	bos->bLength = USB_DT_BOS_SIZE;
 	bos->bDescriptorType = USB_DT_BOS;
@@ -619,6 +620,29 @@ static int bos_desc(struct usb_composite_dev *cdev)
 	bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE);
 	bos->bNumDeviceCaps = 0;
 
+	/* Get Controller configuration */
+	if (cdev->gadget->ops->get_config_params) {
+		cdev->gadget->ops->get_config_params(cdev->gadget,
+						     &dcd_config_params);
+	} else {
+		dcd_config_params.besl_baseline =
+			USB_DEFAULT_BESL_UNSPECIFIED;
+		dcd_config_params.besl_deep =
+			USB_DEFAULT_BESL_UNSPECIFIED;
+		dcd_config_params.bU1devExitLat =
+			USB_DEFAULT_U1_DEV_EXIT_LAT;
+		dcd_config_params.bU2DevExitLat =
+			cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
+	}
+
+	if (dcd_config_params.besl_baseline != USB_DEFAULT_BESL_UNSPECIFIED)
+		besl = USB_BESL_BASELINE_VALID |
+			USB_SET_BESL_BASELINE(dcd_config_params.besl_baseline);
+
+	if (dcd_config_params.besl_deep != USB_DEFAULT_BESL_UNSPECIFIED)
+		besl |= USB_BESL_DEEP_VALID |
+			USB_SET_BESL_DEEP(dcd_config_params.besl_deep);
+
 	/*
 	 * A SuperSpeed device shall include the USB2.0 extension descriptor
 	 * and shall support LPM when operating in USB2.0 HS mode.
@@ -629,7 +653,8 @@ static int bos_desc(struct usb_composite_dev *cdev)
 	usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
 	usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
 	usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
-	usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT | USB_BESL_SUPPORT);
+	usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT |
+					    USB_BESL_SUPPORT | besl);
 
 	/*
 	 * The Superspeed USB Capability descriptor shall be implemented by all
@@ -650,17 +675,6 @@ static int bos_desc(struct usb_composite_dev *cdev)
 						      USB_HIGH_SPEED_OPERATION |
 						      USB_5GBPS_OPERATION);
 		ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
-
-		/* Get Controller configuration */
-		if (cdev->gadget->ops->get_config_params) {
-			cdev->gadget->ops->get_config_params(cdev->gadget,
-				&dcd_config_params);
-		} else {
-			dcd_config_params.bU1devExitLat =
-				USB_DEFAULT_U1_DEV_EXIT_LAT;
-			dcd_config_params.bU2DevExitLat =
-				cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
-		}
 		ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
 		ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
 	}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
index c08d385e2723..90b134d5dca9 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
@@ -65,14 +65,16 @@ void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
 void ast_vhub_nuke(struct ast_vhub_ep *ep, int status)
 {
 	struct ast_vhub_req *req;
-
-	EPDBG(ep, "Nuking\n");
+	int count = 0;
 
 	/* Beware, lock will be dropped & req-acquired by done() */
 	while (!list_empty(&ep->queue)) {
 		req = list_first_entry(&ep->queue, struct ast_vhub_req, queue);
 		ast_vhub_done(ep, req, status);
+		count++;
 	}
+	if (count)
+		EPDBG(ep, "Nuked %d request(s)\n", count);
 }
 
 struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep,
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
index 6b1b16b17d7d..4008e7a51188 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/dev.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
@@ -50,11 +50,14 @@ void ast_vhub_dev_irq(struct ast_vhub_dev *d)
 
 static void ast_vhub_dev_enable(struct ast_vhub_dev *d)
 {
-	u32 reg, hmsk;
+	u32 reg, hmsk, i;
 
 	if (d->enabled)
 		return;
 
+	/* Cleanup EP0 state */
+	ast_vhub_reset_ep0(d);
+
 	/* Enable device and its EP0 interrupts */
 	reg = VHUB_DEV_EN_ENABLE_PORT |
 		VHUB_DEV_EN_EP0_IN_ACK_IRQEN |
@@ -73,6 +76,19 @@ static void ast_vhub_dev_enable(struct ast_vhub_dev *d)
 	/* Set EP0 DMA buffer address */
 	writel(d->ep0.buf_dma, d->regs + AST_VHUB_DEV_EP0_DATA);
 
+	/* Clear stall on all EPs */
+	for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) {
+		struct ast_vhub_ep *ep = d->epns[i];
+
+		if (ep && (ep->epn.stalled || ep->epn.wedged)) {
+			ep->epn.stalled = false;
+			ep->epn.wedged = false;
+			ast_vhub_update_epn_stall(ep);
+		}
+	}
+
+	/* Additional cleanups */
+	d->wakeup_en = false;
 	d->enabled = true;
 }
 
@@ -93,7 +109,6 @@ static void ast_vhub_dev_disable(struct ast_vhub_dev *d)
 	writel(0, d->regs + AST_VHUB_DEV_EN_CTRL);
 	d->gadget.speed = USB_SPEED_UNKNOWN;
 	d->enabled = false;
-	d->suspended = false;
 }
 
 static int ast_vhub_dev_feature(struct ast_vhub_dev *d,
@@ -201,14 +216,19 @@ int ast_vhub_std_dev_request(struct ast_vhub_ep *ep,
 	u16 wValue, wIndex;
 
 	/* No driver, we shouldn't be enabled ... */
-	if (!d->driver || !d->enabled || d->suspended) {
+	if (!d->driver || !d->enabled) {
 		EPDBG(ep,
-		      "Device is wrong state driver=%p enabled=%d"
-		      " suspended=%d\n",
-		      d->driver, d->enabled, d->suspended);
+		      "Device is wrong state driver=%p enabled=%d\n",
+		      d->driver, d->enabled);
 		return std_req_stall;
 	}
 
+	/*
+	 * Note: we used to reject/stall requests while suspended,
+	 * we don't do that anymore as we seem to have cases of
+	 * mass storage getting very upset.
+	 */
+
 	/* First packet, grab speed */
 	if (d->gadget.speed == USB_SPEED_UNKNOWN) {
 		d->gadget.speed = ep->vhub->speed;
@@ -449,8 +469,7 @@ static const struct usb_gadget_ops ast_vhub_udc_ops = {
 
 void ast_vhub_dev_suspend(struct ast_vhub_dev *d)
 {
-	d->suspended = true;
-	if (d->driver) {
+	if (d->driver && d->driver->suspend) {
 		spin_unlock(&d->vhub->lock);
 		d->driver->suspend(&d->gadget);
 		spin_lock(&d->vhub->lock);
@@ -459,8 +478,7 @@ void ast_vhub_dev_suspend(struct ast_vhub_dev *d)
 
 void ast_vhub_dev_resume(struct ast_vhub_dev *d)
 {
-	d->suspended = false;
-	if (d->driver) {
+	if (d->driver && d->driver->resume) {
 		spin_unlock(&d->vhub->lock);
 		d->driver->resume(&d->gadget);
 		spin_lock(&d->vhub->lock);
@@ -469,46 +487,28 @@ void ast_vhub_dev_resume(struct ast_vhub_dev *d)
 
 void ast_vhub_dev_reset(struct ast_vhub_dev *d)
 {
-	/*
-	 * If speed is not set, we enable the port. If it is,
-	 * send reset to the gadget and reset "speed".
-	 *
-	 * Speed is an indication that we have got the first
-	 * setup packet to the device.
-	 */
-	if (d->gadget.speed == USB_SPEED_UNKNOWN && !d->enabled) {
-		DDBG(d, "Reset at unknown speed of disabled device, enabling...\n");
-		ast_vhub_dev_enable(d);
-		d->suspended = false;
+	/* No driver, just disable the device and return */
+	if (!d->driver) {
+		ast_vhub_dev_disable(d);
+		return;
 	}
-	if (d->gadget.speed != USB_SPEED_UNKNOWN && d->driver) {
-		unsigned int i;
 
-		DDBG(d, "Reset at known speed of bound device, resetting...\n");
+	/* If the port isn't enabled, just enable it */
+	if (!d->enabled) {
+		DDBG(d, "Reset of disabled device, enabling...\n");
+		ast_vhub_dev_enable(d);
+	} else {
+		DDBG(d, "Reset of enabled device, resetting...\n");
 		spin_unlock(&d->vhub->lock);
-		d->driver->reset(&d->gadget);
+		usb_gadget_udc_reset(&d->gadget, d->driver);
 		spin_lock(&d->vhub->lock);
 
 		/*
-		 * Disable/re-enable HW, this will clear the address
+		 * Disable and maybe re-enable HW, this will clear the address
 		 * and speed setting.
 		 */
 		ast_vhub_dev_disable(d);
 		ast_vhub_dev_enable(d);
-
-		/* Clear stall on all EPs */
-		for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) {
-			struct ast_vhub_ep *ep = d->epns[i];
-
-			if (ep && ep->epn.stalled) {
-				ep->epn.stalled = false;
-				ast_vhub_update_epn_stall(ep);
-			}
-		}
-
-		/* Additional cleanups */
-		d->wakeup_en = false;
-		d->suspended = false;
 	}
 }
 
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
index e2927fb083cf..022b777b85f8 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
@@ -105,18 +105,20 @@ void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep)
 	       (crq.bRequestType & USB_DIR_IN) ? "in" : "out",
 	       ep->ep0.state);
 
-	/* Check our state, cancel pending requests if needed */
-	if (ep->ep0.state != ep0_state_token) {
+	/*
+	 * Check our state, cancel pending requests if needed
+	 *
+	 * Note: Under some circumstances, we can get a new setup
+	 * packet while waiting for the stall ack, just accept it.
+	 *
+	 * In any case, a SETUP packet in wrong state should have
+	 * reset the HW state machine, so let's just log, nuke
+	 * requests, move on.
+	 */
+	if (ep->ep0.state != ep0_state_token &&
+	    ep->ep0.state != ep0_state_stall) {
 		EPDBG(ep, "wrong state\n");
 		ast_vhub_nuke(ep, -EIO);
-
-		/*
-		 * Accept the packet regardless, this seems to happen
-		 * when stalling a SETUP packet that has an OUT data
-		 * phase.
-		 */
-		ast_vhub_nuke(ep, 0);
-		goto stall;
 	}
 
 	/* Calculate next state for EP0 */
@@ -165,7 +167,7 @@ void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep)
  stall:
 	EPDBG(ep, "stalling\n");
 	writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat);
-	ep->ep0.state = ep0_state_status;
+	ep->ep0.state = ep0_state_stall;
 	ep->ep0.dir_in = false;
 	return;
 
@@ -299,8 +301,8 @@ void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack)
 		if ((ep->ep0.dir_in && (stat & VHUB_EP0_TX_BUFF_RDY)) ||
 		    (!ep->ep0.dir_in && (stat & VHUB_EP0_RX_BUFF_RDY)) ||
 		    (ep->ep0.dir_in != in_ack)) {
+			/* In that case, ignore interrupt */
 			dev_warn(dev, "irq state mismatch");
-			stall = true;
 			break;
 		}
 		/*
@@ -335,12 +337,22 @@ void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack)
 			dev_warn(dev, "status direction mismatch\n");
 			stall = true;
 		}
+		break;
+	case ep0_state_stall:
+		/*
+		 * There shouldn't be any request left, but nuke just in case
+		 * otherwise the stale request will block subsequent ones
+		 */
+		ast_vhub_nuke(ep, -EIO);
+		break;
 	}
 
-	/* Reset to token state */
-	ep->ep0.state = ep0_state_token;
-	if (stall)
+	/* Reset to token state or stall */
+	if (stall) {
 		writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat);
+		ep->ep0.state = ep0_state_stall;
+	} else
+		ep->ep0.state = ep0_state_token;
 }
 
 static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req,
@@ -367,7 +379,7 @@ static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req,
 		return -EINVAL;
 
 	/* Disabled device */
-	if (ep->dev && (!ep->dev->enabled || ep->dev->suspended))
+	if (ep->dev && !ep->dev->enabled)
 		return -ESHUTDOWN;
 
 	/* Data, no buffer and not internal ? */
@@ -390,8 +402,12 @@ static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req,
 	spin_lock_irqsave(&vhub->lock, flags);
 
 	/* EP0 can only support a single request at a time */
-	if (!list_empty(&ep->queue) || ep->ep0.state == ep0_state_token) {
+	if (!list_empty(&ep->queue) ||
+	    ep->ep0.state == ep0_state_token ||
+	    ep->ep0.state == ep0_state_stall) {
 		dev_warn(dev, "EP0: Request in wrong state\n");
+	        EPVDBG(ep, "EP0: list_empty=%d state=%d\n",
+		       list_empty(&ep->queue), ep->ep0.state);
 		spin_unlock_irqrestore(&vhub->lock, flags);
 		return -EBUSY;
 	}
@@ -459,6 +475,15 @@ static const struct usb_ep_ops ast_vhub_ep0_ops = {
 	.free_request	= ast_vhub_free_request,
 };
 
+void ast_vhub_reset_ep0(struct ast_vhub_dev *dev)
+{
+	struct ast_vhub_ep *ep = &dev->ep0;
+
+	ast_vhub_nuke(ep, -EIO);
+	ep->ep0.state = ep0_state_token;
+}
+
+
 void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep,
 		       struct ast_vhub_dev *dev)
 {
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
index 35941dc125f9..7475c74aa5c5 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -352,7 +352,7 @@ static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req,
 
 	/* Endpoint enabled ? */
 	if (!ep->epn.enabled || !u_ep->desc || !ep->dev || !ep->d_idx ||
-	    !ep->dev->enabled || ep->dev->suspended) {
+	    !ep->dev->enabled) {
 		EPDBG(ep, "Enqueuing request on wrong or disabled EP\n");
 		return -ESHUTDOWN;
 	}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
index 7c040f56100e..19b3517e04c0 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
@@ -449,8 +449,15 @@ static void ast_vhub_change_port_stat(struct ast_vhub *vhub,
 		       USB_PORT_STAT_C_OVERCURRENT |
 		       USB_PORT_STAT_C_RESET |
 		       USB_PORT_STAT_C_L1;
-		p->change |= chg;
 
+		/*
+		 * We only set USB_PORT_STAT_C_ENABLE if we are disabling
+		 * the port as per USB spec, otherwise MacOS gets upset
+		 */
+		if (p->status & USB_PORT_STAT_ENABLE)
+			chg &= ~USB_PORT_STAT_C_ENABLE;
+
+		p->change = chg;
 		ast_vhub_update_hub_ep1(vhub, port);
 	}
 }
@@ -723,6 +730,12 @@ enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep,
 	case ClearPortFeature:
 		EPDBG(ep, "ClearPortFeature(%d,%d)\n", wIndex & 0xf, wValue);
 		return ast_vhub_clr_port_feature(ep, wIndex & 0xf, wValue);
+	case ClearTTBuffer:
+	case ResetTT:
+	case StopTT:
+		return std_req_complete;
+	case GetTTState:
+		return ast_vhub_simple_reply(ep, 0, 0, 0, 0);
 	default:
 		EPDBG(ep, "Unknown class request\n");
 	}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
index 4ed03d33a5a9..761919e220d3 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
+++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
@@ -257,6 +257,7 @@ enum ep0_state {
 	ep0_state_token,
 	ep0_state_data,
 	ep0_state_status,
+	ep0_state_stall,
 };
 
 /*
@@ -353,7 +354,6 @@ struct ast_vhub_dev {
 	struct usb_gadget_driver	*driver;
 	bool				registered : 1;
 	bool				wakeup_en : 1;
-	bool				suspended : 1;
 	bool				enabled : 1;
 
 	/* Endpoint structures */
@@ -507,6 +507,7 @@ void ast_vhub_init_hw(struct ast_vhub *vhub);
 /* ep0.c */
 void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack);
 void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep);
+void ast_vhub_reset_ep0(struct ast_vhub_dev *dev);
 void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep,
 		       struct ast_vhub_dev *dev);
 int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len);
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 7cf34beb50df..92af8dc98c3d 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1143,7 +1143,7 @@ static int check_pending_gadget_drivers(struct usb_udc *udc)
 						dev_name(&udc->dev)) == 0) {
 			ret = udc_bind_to_driver(udc, driver);
 			if (ret != -EPROBE_DEFER)
-				list_del(&driver->pending);
+				list_del_init(&driver->pending);
 			break;
 		}
 
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index e9cf20979bf6..338c606b7c27 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -742,7 +742,6 @@ static inline void udc_protocol_cmd_data_w(struct lpc32xx_udc *udc, u32 cmd,
  * response data */
 static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd)
 {
-	u32 tmp;
 	int to = 1000;
 
 	/* Write a command and read data from the protocol engine */
@@ -752,7 +751,6 @@ static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd)
 	/* Write command code */
 	udc_protocol_cmd_w(udc, cmd);
 
-	tmp = readl(USBD_DEVINTST(udc->udp_baseaddr));
 	while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & USBD_CDFULL))
 	       && (to > 0))
 		to--;
@@ -1992,7 +1990,7 @@ void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
 /* DMA end of transfer completion */
 static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
 {
-	u32 status, epstatus;
+	u32 status;
 	struct lpc32xx_request *req;
 	struct lpc32xx_usbd_dd_gad *dd;
 
@@ -2086,7 +2084,7 @@ static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
 		if (udc_clearep_getsts(udc, ep->hwep_num) & EP_SEL_F) {
 			udc_clearep_getsts(udc, ep->hwep_num);
 			uda_enable_hwepint(udc, ep->hwep_num);
-			epstatus = udc_clearep_getsts(udc, ep->hwep_num);
+			udc_clearep_getsts(udc, ep->hwep_num);
 
 			/* Let the EP interrupt handle the ZLP */
 			return;
@@ -2198,7 +2196,7 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
 	struct lpc32xx_ep *ep, *ep0 = &udc->ep[0];
 	struct usb_ctrlrequest ctrlpkt;
 	int i, bytes;
-	u16 wIndex, wValue, wLength, reqtype, req, tmp;
+	u16 wIndex, wValue, reqtype, req, tmp;
 
 	/* Nuke previous transfers */
 	nuke(ep0, -EPROTO);
@@ -2214,7 +2212,6 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
 	/* Native endianness */
 	wIndex = le16_to_cpu(ctrlpkt.wIndex);
 	wValue = le16_to_cpu(ctrlpkt.wValue);
-	wLength = le16_to_cpu(ctrlpkt.wLength);
 	reqtype = le16_to_cpu(ctrlpkt.bRequestType);
 
 	/* Set direction of EP0 */
@@ -2265,7 +2262,7 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
 		default:
 			break;
 		}
-
+		break;
 
 	case USB_REQ_SET_ADDRESS:
 		if (reqtype == (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) {
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index b6bbe2e448ba..51efee21915f 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -2244,30 +2244,40 @@ static void usb_reinit_338x(struct net2280 *dev)
 	}
 
 	/* Hardware Defect and Workaround */
-	val = readl(&dev->ll_lfps_regs->ll_lfps_5);
+	val = readl(&dev->llregs->ll_lfps_5);
 	val &= ~(0xf << TIMER_LFPS_6US);
 	val |= 0x5 << TIMER_LFPS_6US;
-	writel(val, &dev->ll_lfps_regs->ll_lfps_5);
+	writel(val, &dev->llregs->ll_lfps_5);
 
-	val = readl(&dev->ll_lfps_regs->ll_lfps_6);
+	val = readl(&dev->llregs->ll_lfps_6);
 	val &= ~(0xffff << TIMER_LFPS_80US);
 	val |= 0x0100 << TIMER_LFPS_80US;
-	writel(val, &dev->ll_lfps_regs->ll_lfps_6);
+	writel(val, &dev->llregs->ll_lfps_6);
 
 	/*
 	 * AA_AB Errata. Issue 4. Workaround for SuperSpeed USB
 	 * Hot Reset Exit Handshake may Fail in Specific Case using
 	 * Default Register Settings. Workaround for Enumeration test.
 	 */
-	val = readl(&dev->ll_tsn_regs->ll_tsn_counters_2);
+	val = readl(&dev->llregs->ll_tsn_counters_2);
 	val &= ~(0x1f << HOT_TX_NORESET_TS2);
 	val |= 0x10 << HOT_TX_NORESET_TS2;
-	writel(val, &dev->ll_tsn_regs->ll_tsn_counters_2);
+	writel(val, &dev->llregs->ll_tsn_counters_2);
 
-	val = readl(&dev->ll_tsn_regs->ll_tsn_counters_3);
+	val = readl(&dev->llregs->ll_tsn_counters_3);
 	val &= ~(0x1f << HOT_RX_RESET_TS2);
 	val |= 0x3 << HOT_RX_RESET_TS2;
-	writel(val, &dev->ll_tsn_regs->ll_tsn_counters_3);
+	writel(val, &dev->llregs->ll_tsn_counters_3);
+
+	/*
+	 * AB errata. Errata 11. Workaround for Default Duration of LFPS
+	 * Handshake Signaling for Device-Initiated U1 Exit is too short.
+	 * Without this, various enumeration failures observed with
+	 * modern superspeed hosts.
+	 */
+	val = readl(&dev->llregs->ll_lfps_timers_2);
+	writel((val & 0xffff0000) | LFPS_TIMERS_2_WORKAROUND_VALUE,
+	       &dev->llregs->ll_lfps_timers_2);
 
 	/*
 	 * Set Recovery Idle to Recover bit:
@@ -2276,10 +2286,10 @@ static void usb_reinit_338x(struct net2280 *dev)
 	 * - It is safe to set for all connection speeds; all chip revisions.
 	 * - R-M-W to leave other bits undisturbed.
 	 * - Reference PLX TT-7372
-	 */
-	val = readl(&dev->ll_chicken_reg->ll_tsn_chicken_bit);
+	*/
+	val = readl(&dev->llregs->ll_tsn_chicken_bit);
 	val |= BIT(RECOVERY_IDLE_TO_RECOVER_FMW);
-	writel(val, &dev->ll_chicken_reg->ll_tsn_chicken_bit);
+	writel(val, &dev->llregs->ll_tsn_chicken_bit);
 
 	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
 
@@ -3669,12 +3679,6 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 							(base + 0x00b4);
 		dev->llregs = (struct usb338x_ll_regs __iomem *)
 							(base + 0x0700);
-		dev->ll_lfps_regs = (struct usb338x_ll_lfps_regs __iomem *)
-							(base + 0x0748);
-		dev->ll_tsn_regs = (struct usb338x_ll_tsn_regs __iomem *)
-							(base + 0x077c);
-		dev->ll_chicken_reg = (struct usb338x_ll_chi_regs __iomem *)
-							(base + 0x079c);
 		dev->plregs = (struct usb338x_pl_regs __iomem *)
 							(base + 0x0800);
 		usbstat = readl(&dev->usb->usbstat);
diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h
index b65a797544d7..85d3ca1698ba 100644
--- a/drivers/usb/gadget/udc/net2280.h
+++ b/drivers/usb/gadget/udc/net2280.h
@@ -178,9 +178,6 @@ struct net2280 {
 	struct net2280_dep_regs		__iomem *dep;
 	struct net2280_ep_regs		__iomem *epregs;
 	struct usb338x_ll_regs		__iomem *llregs;
-	struct usb338x_ll_lfps_regs	__iomem *ll_lfps_regs;
-	struct usb338x_ll_tsn_regs	__iomem *ll_tsn_regs;
-	struct usb338x_ll_chi_regs	__iomem *ll_chicken_reg;
 	struct usb338x_pl_regs		__iomem *plregs;
 
 	struct dma_pool			*requests;
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index cded51f36fc1..265dab2bbfac 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -3046,8 +3046,7 @@ static void pch_udc_remove(struct pci_dev *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int pch_udc_suspend(struct device *d)
 {
-	struct pci_dev *pdev = to_pci_dev(d);
-	struct pch_udc_dev *dev = pci_get_drvdata(pdev);
+	struct pch_udc_dev *dev = dev_get_drvdata(d);
 
 	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
 	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);