summaryrefslogtreecommitdiff
path: root/drivers/usb/phy
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-01-03 12:15:10 -0800
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-01-03 12:15:10 -0800
commit73ad0adcb69d6a895ff73855ab366a7ae0b2fb0b (patch)
treea66967eb3fe9b6162820c93b5c56221d90c291c8 /drivers/usb/phy
parent99f14bd4d1b2a1b1b6cd508e08efdbc5e3919198 (diff)
parent836a2164491b19dcd4f29d574e548bcadd421a6a (diff)
Merge tag 'usb-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes: usb: changes for v3.14 merge window This pull request is quite extensive, containing 105 non-merge commits. Because of that, we describe the changes in sections below: New drivers: - Keystone PHY driver and DWC3 Glue Layer - Aeroflex Gaisler GRUSBDC - Tahvo PHY driver for N770 - JZ4740 MUSB gluer Layer - Broadcom PHY Driver Important new features: - MUSB DSPS learned about suspend/resume - New quirk_ep_out_aligned_size flag added to struct usb_gadget - DWC3 initializes the new quirk flag so gadget drivers can use it. - AM335x PHY Driver learns about remote wakeup - Renesas USBHS now requests DMA Engine only once - s3c-hsotg is now re-used on Broadcom devices - USB PHY layer now makes sure to initialize the notifier for all drivers - omap-control learned about TI's new AM437x devices - few other usb gadget/function drivers learned about the new configfs-based binding. Misc Fixes and Clean Ups: - Several sparse fixes all over the place - Removal of redundant of_match_ptr() - r-car gen2 phy now uses usb_add_phy_dev() - removal of DEFINE_PCI_DEVICE_TABLE() from a few drivers - conversion to clk_prepare/clk_unprepare on r8a66597-udc - some randconfig errors and build warnings were fixed - removal of unnecessary lock on dwc3-omap.c Signed-of-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r--drivers/usb/phy/Kconfig52
-rw-r--r--drivers/usb/phy/Makefile7
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c2
-rw-r--r--drivers/usb/phy/phy-am335x-control.c6
-rw-r--r--drivers/usb/phy/phy-am335x.c39
-rw-r--r--drivers/usb/phy/phy-fsl-usb.c7
-rw-r--r--drivers/usb/phy/phy-fsl-usb.h2
-rw-r--r--drivers/usb/phy/phy-fsm-usb.c14
-rw-r--r--drivers/usb/phy/phy-fsm-usb.h236
-rw-r--r--drivers/usb/phy/phy-generic.c1
-rw-r--r--drivers/usb/phy/phy-gpio-vbus-usb.c2
-rw-r--r--drivers/usb/phy/phy-isp1301-omap.c9
-rw-r--r--drivers/usb/phy/phy-keystone.c136
-rw-r--r--drivers/usb/phy/phy-mxs-usb.c13
-rw-r--r--drivers/usb/phy/phy-omap-control.c19
-rw-r--r--drivers/usb/phy/phy-omap-otg.c169
-rw-r--r--drivers/usb/phy/phy-rcar-gen2-usb.c2
-rw-r--r--drivers/usb/phy/phy-tahvo.c457
-rw-r--r--drivers/usb/phy/phy-twl6030-usb.c2
-rw-r--r--drivers/usb/phy/phy.c4
20 files changed, 894 insertions, 285 deletions
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 2b41c636a52a..7d1451d5bbea 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -6,6 +6,15 @@ menu "USB Physical Layer drivers"
config USB_PHY
def_bool n
+config USB_OTG_FSM
+ tristate "USB 2.0 OTG FSM implementation"
+ depends on USB
+ select USB_OTG
+ select USB_PHY
+ help
+ Implements OTG Final State Machine as specified in On-The-Go
+ and Embedded Host Supplement to the USB Revision 2.0 Specification.
+
#
# USB Transceiver Drivers
#
@@ -19,9 +28,8 @@ config AB8500_USB
in host mode, low speed.
config FSL_USB2_OTG
- tristate "Freescale USB OTG Transceiver Driver"
- depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME
- depends on USB
+ bool "Freescale USB OTG Transceiver Driver"
+ depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM_RUNTIME
select USB_OTG
select USB_PHY
help
@@ -40,7 +48,16 @@ config ISP1301_OMAP
Instruments OMAP processors.
This driver can also be built as a module. If so, the module
- will be called isp1301_omap.
+ will be called phy-isp1301-omap.
+
+config KEYSTONE_USB_PHY
+ tristate "Keystone USB PHY Driver"
+ depends on ARCH_KEYSTONE || COMPILE_TEST
+ select NOP_USB_XCEIV
+ help
+ Enable this to support Keystone USB phy. This driver provides
+ interface to interact with USB 2.0 and USB 3.0 PHY that is part
+ of the Keystone SOC.
config MV_U3D_PHY
bool "Marvell USB 3.0 PHY controller Driver"
@@ -136,6 +153,31 @@ config USB_GPIO_VBUS
optionally control of a D+ pullup GPIO as well as a VBUS
current limit regulator.
+config OMAP_OTG
+ tristate "OMAP USB OTG controller driver"
+ depends on ARCH_OMAP_OTG && EXTCON
+ help
+ Enable this to support some transceivers on OMAP1 platforms. OTG
+ controller is needed to switch between host and peripheral modes.
+
+ This driver can also be built as a module. If so, the module
+ will be called phy-omap-otg.
+
+config TAHVO_USB
+ tristate "Tahvo USB transceiver driver"
+ depends on MFD_RETU && EXTCON
+ select USB_PHY
+ help
+ Enable this to support USB transceiver on Tahvo. This is used
+ at least on Nokia 770.
+
+config TAHVO_USB_HOST_BY_DEFAULT
+ depends on TAHVO_USB
+ boolean "Device in USB host mode by default"
+ help
+ Say Y here, if you want the device to enter USB host mode
+ by default on bootup.
+
config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
depends on USB || USB_GADGET
@@ -147,7 +189,7 @@ config USB_ISP1301
and OTG drivers (to be selected separately).
To compile this driver as a module, choose M here: the
- module will be called isp1301.
+ module will be called phy-isp1301.
config USB_MSM_OTG
tristate "OTG support for Qualcomm on-chip USB controller"
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 022c1da7fb78..be58adae3496 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -3,18 +3,20 @@
#
obj-$(CONFIG_USB_PHY) += phy.o
obj-$(CONFIG_OF) += of.o
+obj-$(CONFIG_USB_OTG_FSM) += phy-fsm-usb.o
# transceiver drivers, keep the list sorted
obj-$(CONFIG_AB8500_USB) += phy-ab8500-usb.o
-phy-fsl-usb2-objs := phy-fsl-usb.o phy-fsm-usb.o
-obj-$(CONFIG_FSL_USB2_OTG) += phy-fsl-usb2.o
+obj-$(CONFIG_FSL_USB2_OTG) += phy-fsl-usb.o
obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o
obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o
obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o
+obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o
obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o
obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o
obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o
+obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o
obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o
obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o
obj-$(CONFIG_SAMSUNG_USB2PHY) += phy-samsung-usb2.o
@@ -30,3 +32,4 @@ obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o
obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o
obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
+obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 087402350b6d..11ab2c45e462 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -1415,8 +1415,6 @@ static int ab8500_usb_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ab);
- ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier);
-
/* all: Disable phy when called from set_host and set_peripheral */
INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c
index 634f49acd20e..d75196ad5f2f 100644
--- a/drivers/usb/phy/phy-am335x-control.c
+++ b/drivers/usb/phy/phy-am335x-control.c
@@ -3,11 +3,7 @@
#include <linux/err.h>
#include <linux/of.h>
#include <linux/io.h>
-
-struct phy_control {
- void (*phy_power)(struct phy_control *phy_ctrl, u32 id, bool on);
- void (*phy_wkup)(struct phy_control *phy_ctrl, u32 id, bool on);
-};
+#include "am35x-phy-control.h"
struct am335x_control_usb {
struct device *dev;
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index 0e3c60cb669a..12fc3468a01e 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -63,6 +63,19 @@ static int am335x_phy_probe(struct platform_device *pdev)
am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
platform_set_drvdata(pdev, am_phy);
+ device_init_wakeup(dev, true);
+
+ /*
+ * If we leave PHY wakeup enabled then AM33XX wakes up
+ * immediately from DS0. To avoid this we mark dev->power.can_wakeup
+ * to false. The same is checked in suspend routine to decide
+ * on whether to enable PHY wakeup or not.
+ * PHY wakeup works fine in standby mode, there by allowing us to
+ * handle remote wakeup, wakeup on disconnect and connect.
+ */
+
+ device_set_wakeup_enable(dev, false);
+ phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
return 0;
}
@@ -75,38 +88,48 @@ static int am335x_phy_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
-
-static int am335x_phy_runtime_suspend(struct device *dev)
+#ifdef CONFIG_PM_SLEEP
+static int am335x_phy_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct am335x_phy *am_phy = platform_get_drvdata(pdev);
+ /*
+ * Enable phy wakeup only if dev->power.can_wakeup is true.
+ * Make sure to enable wakeup to support remote wakeup in
+ * standby mode ( same is not supported in OFF(DS0) mode).
+ * Enable it by doing
+ * echo enabled > /sys/bus/platform/devices/<usb-phy-id>/power/wakeup
+ */
+
if (device_may_wakeup(dev))
phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, true);
+
phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
+
return 0;
}
-static int am335x_phy_runtime_resume(struct device *dev)
+static int am335x_phy_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct am335x_phy *am_phy = platform_get_drvdata(pdev);
phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, true);
+
if (device_may_wakeup(dev))
phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, false);
+
return 0;
}
static const struct dev_pm_ops am335x_pm_ops = {
- SET_RUNTIME_PM_OPS(am335x_phy_runtime_suspend,
- am335x_phy_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(am335x_phy_suspend, am335x_phy_resume)
};
-#define DEV_PM_OPS (&am335x_pm_ops)
+#define DEV_PM_OPS (&am335x_pm_ops)
#else
-#define DEV_PM_OPS NULL
+#define DEV_PM_OPS NULL
#endif
static const struct of_device_id am335x_phy_ids[] = {
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index 7f3c73b967ce..62d5af22efaf 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -848,7 +848,7 @@ static int fsl_otg_conf(struct platform_device *pdev)
pr_info("Couldn't init OTG timers\n");
goto err;
}
- spin_lock_init(&fsl_otg_tc->fsm.lock);
+ mutex_init(&fsl_otg_tc->fsm.lock);
/* Set OTG state machine operations */
fsl_otg_tc->fsm.ops = &fsl_otg_ops;
@@ -1017,10 +1017,9 @@ static int show_fsl_usb2_otg_state(struct device *dev,
struct otg_fsm *fsm = &fsl_otg_dev->fsm;
char *next = buf;
unsigned size = PAGE_SIZE;
- unsigned long flags;
int t;
- spin_lock_irqsave(&fsm->lock, flags);
+ mutex_lock(&fsm->lock);
/* basic driver infomation */
t = scnprintf(next, size,
@@ -1088,7 +1087,7 @@ static int show_fsl_usb2_otg_state(struct device *dev,
size -= t;
next += t;
- spin_unlock_irqrestore(&fsm->lock, flags);
+ mutex_unlock(&fsm->lock);
return PAGE_SIZE - size;
}
diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h
index 7365170a2f23..5986c96354df 100644
--- a/drivers/usb/phy/phy-fsl-usb.h
+++ b/drivers/usb/phy/phy-fsl-usb.h
@@ -15,7 +15,7 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include "phy-fsm-usb.h"
+#include <linux/usb/otg-fsm.h>
#include <linux/usb/otg.h>
#include <linux/ioctl.h>
diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c
index 329c2d2f8595..7aa314ef4a8a 100644
--- a/drivers/usb/phy/phy-fsm-usb.c
+++ b/drivers/usb/phy/phy-fsm-usb.c
@@ -23,13 +23,12 @@
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/usb.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
-
-#include "phy-fsm-usb.h"
+#include <linux/usb/otg-fsm.h>
/* Change USB protocol when there is a protocol change */
static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
@@ -65,7 +64,7 @@ static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
static int state_changed;
/* Called when leaving a state. Do state clean up jobs here */
-void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
+static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
{
switch (old_state) {
case OTG_STATE_B_IDLE:
@@ -122,7 +121,7 @@ void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
}
/* Called when entering a state */
-int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
+static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
{
state_changed = 1;
if (fsm->otg->phy->state == new_state)
@@ -245,9 +244,8 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
int otg_statemachine(struct otg_fsm *fsm)
{
enum usb_otg_state state;
- unsigned long flags;
- spin_lock_irqsave(&fsm->lock, flags);
+ mutex_lock(&fsm->lock);
state = fsm->otg->phy->state;
state_changed = 0;
@@ -359,7 +357,7 @@ int otg_statemachine(struct otg_fsm *fsm)
default:
break;
}
- spin_unlock_irqrestore(&fsm->lock, flags);
+ mutex_unlock(&fsm->lock);
VDBG("quit statemachine, changed = %d\n", state_changed);
return state_changed;
diff --git a/drivers/usb/phy/phy-fsm-usb.h b/drivers/usb/phy/phy-fsm-usb.h
deleted file mode 100644
index 7441b46a27f1..000000000000
--- a/drivers/usb/phy/phy-fsm-usb.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#undef VERBOSE
-
-#ifdef VERBOSE
-#define VDBG(fmt, args...) pr_debug("[%s] " fmt , \
- __func__, ## args)
-#else
-#define VDBG(stuff...) do {} while (0)
-#endif
-
-#ifdef VERBOSE
-#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__)
-#else
-#define MPC_LOC do {} while (0)
-#endif
-
-#define PROTO_UNDEF (0)
-#define PROTO_HOST (1)
-#define PROTO_GADGET (2)
-
-enum otg_fsm_timer {
- /* Standard OTG timers */
- A_WAIT_VRISE,
- A_WAIT_VFALL,
- A_WAIT_BCON,
- A_AIDL_BDIS,
- B_ASE0_BRST,
- A_BIDL_ADIS,
-
- /* Auxiliary timers */
- B_SE0_SRP,
- B_SRP_FAIL,
- A_WAIT_ENUM,
-
- NUM_OTG_FSM_TIMERS,
-};
-
-/* OTG state machine according to the OTG spec */
-struct otg_fsm {
- /* Input */
- int id;
- int adp_change;
- int power_up;
- int test_device;
- int a_bus_drop;
- int a_bus_req;
- int a_srp_det;
- int a_vbus_vld;
- int b_conn;
- int a_bus_resume;
- int a_bus_suspend;
- int a_conn;
- int b_bus_req;
- int b_se0_srp;
- int b_ssend_srp;
- int b_sess_vld;
- /* Auxilary inputs */
- int a_sess_vld;
- int b_bus_resume;
- int b_bus_suspend;
-
- /* Output */
- int data_pulse;
- int drv_vbus;
- int loc_conn;
- int loc_sof;
- int adp_prb;
- int adp_sns;
-
- /* Internal variables */
- int a_set_b_hnp_en;
- int b_srp_done;
- int b_hnp_enable;
- int a_clr_err;
-
- /* Informative variables */
- int a_bus_drop_inf;
- int a_bus_req_inf;
- int a_clr_err_inf;
- int b_bus_req_inf;
- /* Auxilary informative variables */
- int a_suspend_req_inf;
-
- /* Timeout indicator for timers */
- int a_wait_vrise_tmout;
- int a_wait_vfall_tmout;
- int a_wait_bcon_tmout;
- int a_aidl_bdis_tmout;
- int b_ase0_brst_tmout;
- int a_bidl_adis_tmout;
-
- struct otg_fsm_ops *ops;
- struct usb_otg *otg;
-
- /* Current usb protocol used: 0:undefine; 1:host; 2:client */
- int protocol;
- spinlock_t lock;
-};
-
-struct otg_fsm_ops {
- void (*chrg_vbus)(struct otg_fsm *fsm, int on);
- void (*drv_vbus)(struct otg_fsm *fsm, int on);
- void (*loc_conn)(struct otg_fsm *fsm, int on);
- void (*loc_sof)(struct otg_fsm *fsm, int on);
- void (*start_pulse)(struct otg_fsm *fsm);
- void (*start_adp_prb)(struct otg_fsm *fsm);
- void (*start_adp_sns)(struct otg_fsm *fsm);
- void (*add_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
- void (*del_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
- int (*start_host)(struct otg_fsm *fsm, int on);
- int (*start_gadget)(struct otg_fsm *fsm, int on);
-};
-
-
-static inline int otg_chrg_vbus(struct otg_fsm *fsm, int on)
-{
- if (!fsm->ops->chrg_vbus)
- return -EOPNOTSUPP;
- fsm->ops->chrg_vbus(fsm, on);
- return 0;
-}
-
-static inline int otg_drv_vbus(struct otg_fsm *fsm, int on)
-{
- if (!fsm->ops->drv_vbus)
- return -EOPNOTSUPP;
- if (fsm->drv_vbus != on) {
- fsm->drv_vbus = on;
- fsm->ops->drv_vbus(fsm, on);
- }
- return 0;
-}
-
-static inline int otg_loc_conn(struct otg_fsm *fsm, int on)
-{
- if (!fsm->ops->loc_conn)
- return -EOPNOTSUPP;
- if (fsm->loc_conn != on) {
- fsm->loc_conn = on;
- fsm->ops->loc_conn(fsm, on);
- }
- return 0;
-}
-
-static inline int otg_loc_sof(struct otg_fsm *fsm, int on)
-{
- if (!fsm->ops->loc_sof)
- return -EOPNOTSUPP;
- if (fsm->loc_sof != on) {
- fsm->loc_sof = on;
- fsm->ops->loc_sof(fsm, on);
- }
- return 0;
-}
-
-static inline int otg_start_pulse(struct otg_fsm *fsm)
-{
- if (!fsm->ops->start_pulse)
- return -EOPNOTSUPP;
- if (!fsm->data_pulse) {
- fsm->data_pulse = 1;
- fsm->ops->start_pulse(fsm);
- }
- return 0;
-}
-
-static inline int otg_start_adp_prb(struct otg_fsm *fsm)
-{
- if (!fsm->ops->start_adp_prb)
- return -EOPNOTSUPP;
- if (!fsm->adp_prb) {
- fsm->adp_sns = 0;
- fsm->adp_prb = 1;
- fsm->ops->start_adp_prb(fsm);
- }
- return 0;
-}
-
-static inline int otg_start_adp_sns(struct otg_fsm *fsm)
-{
- if (!fsm->ops->start_adp_sns)
- return -EOPNOTSUPP;
- if (!fsm->adp_sns) {
- fsm->adp_sns = 1;
- fsm->ops->start_adp_sns(fsm);
- }
- return 0;
-}
-
-static inline int otg_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
-{
- if (!fsm->ops->add_timer)
- return -EOPNOTSUPP;
- fsm->ops->add_timer(fsm, timer);
- return 0;
-}
-
-static inline int otg_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
-{
- if (!fsm->ops->del_timer)
- return -EOPNOTSUPP;
- fsm->ops->del_timer(fsm, timer);
- return 0;
-}
-
-static inline int otg_start_host(struct otg_fsm *fsm, int on)
-{
- if (!fsm->ops->start_host)
- return -EOPNOTSUPP;
- return fsm->ops->start_host(fsm, on);
-}
-
-static inline int otg_start_gadget(struct otg_fsm *fsm, int on)
-{
- if (!fsm->ops->start_gadget)
- return -EOPNOTSUPP;
- return fsm->ops->start_gadget(fsm, on);
-}
-
-int otg_statemachine(struct otg_fsm *fsm);
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index aa6d37b3378a..bb394980532b 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -241,7 +241,6 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
nop->phy.otg->set_host = nop_set_host;
nop->phy.otg->set_peripheral = nop_set_peripheral;
- ATOMIC_INIT_NOTIFIER_HEAD(&nop->phy.notifier);
return 0;
}
EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c
index 02799a5efcd4..69462e09d014 100644
--- a/drivers/usb/phy/phy-gpio-vbus-usb.c
+++ b/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -314,8 +314,6 @@ static int gpio_vbus_probe(struct platform_device *pdev)
goto err_irq;
}
- ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier);
-
INIT_DELAYED_WORK(&gpio_vbus->work, gpio_vbus_work);
gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw");
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index d3a5160e4cc7..6e146d723b37 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -1277,7 +1277,7 @@ isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
{
struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
- if (!otg || isp != the_transceiver)
+ if (isp != the_transceiver)
return -ENODEV;
if (!host) {
@@ -1333,7 +1333,7 @@ isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
{
struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
- if (!otg || isp != the_transceiver)
+ if (isp != the_transceiver)
return -ENODEV;
if (!gadget) {
@@ -1414,8 +1414,7 @@ isp1301_start_srp(struct usb_otg *otg)
struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
u32 otg_ctrl;
- if (!otg || isp != the_transceiver
- || isp->phy.state != OTG_STATE_B_IDLE)
+ if (isp != the_transceiver || isp->phy.state != OTG_STATE_B_IDLE)
return -ENODEV;
otg_ctrl = omap_readl(OTG_CTRL);
@@ -1442,7 +1441,7 @@ isp1301_start_hnp(struct usb_otg *otg)
struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
u32 l;
- if (!otg || isp != the_transceiver)
+ if (isp != the_transceiver)
return -ENODEV;
if (otg->default_a && (otg->host == NULL || !otg->host->b_hnp_enable))
return -ENOTCONN;
diff --git a/drivers/usb/phy/phy-keystone.c b/drivers/usb/phy/phy-keystone.c
new file mode 100644
index 000000000000..d762003896c0
--- /dev/null
+++ b/drivers/usb/phy/phy-keystone.c
@@ -0,0 +1,136 @@
+/*
+ * phy-keystone - USB PHY, talking to dwc3 controller in Keystone.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: WingMan Kwok <w-kwok2@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include "phy-generic.h"
+
+/* USB PHY control register offsets */
+#define USB_PHY_CTL_UTMI 0x0000
+#define USB_PHY_CTL_PIPE 0x0004
+#define USB_PHY_CTL_PARAM_1 0x0008
+#define USB_PHY_CTL_PARAM_2 0x000c
+#define USB_PHY_CTL_CLOCK 0x0010
+#define USB_PHY_CTL_PLL 0x0014
+
+#define PHY_REF_SSP_EN BIT(29)
+
+struct keystone_usbphy {
+ struct usb_phy_gen_xceiv usb_phy_gen;
+ void __iomem *phy_ctrl;
+};
+
+static inline u32 keystone_usbphy_readl(void __iomem *base, u32 offset)
+{
+ return readl(base + offset);
+}
+
+static inline void keystone_usbphy_writel(void __iomem *base,
+ u32 offset, u32 value)
+{
+ writel(value, base + offset);
+}
+
+static int keystone_usbphy_init(struct usb_phy *phy)
+{
+ struct keystone_usbphy *k_phy = dev_get_drvdata(phy->dev);
+ u32 val;
+
+ val = keystone_usbphy_readl(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK);
+ keystone_usbphy_writel(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK,
+ val | PHY_REF_SSP_EN);
+ return 0;
+}
+
+static void keystone_usbphy_shutdown(struct usb_phy *phy)
+{
+ struct keystone_usbphy *k_phy = dev_get_drvdata(phy->dev);
+ u32 val;
+
+ val = keystone_usbphy_readl(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK);
+ keystone_usbphy_writel(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK,
+ val &= ~PHY_REF_SSP_EN);
+}
+
+static int keystone_usbphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct keystone_usbphy *k_phy;
+ struct resource *res;
+ int ret;
+
+ k_phy = devm_kzalloc(dev, sizeof(*k_phy), GFP_KERNEL);
+ if (!k_phy)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ k_phy->phy_ctrl = devm_ioremap_resource(dev, res);
+ if (IS_ERR(k_phy->phy_ctrl))
+ return PTR_ERR(k_phy->phy_ctrl);
+
+ ret = usb_phy_gen_create_phy(dev, &k_phy->usb_phy_gen, NULL);
+ if (ret)
+ return ret;
+
+ k_phy->usb_phy_gen.phy.init = keystone_usbphy_init;
+ k_phy->usb_phy_gen.phy.shutdown = keystone_usbphy_shutdown;
+
+ platform_set_drvdata(pdev, k_phy);
+
+ ret = usb_add_phy_dev(&k_phy->usb_phy_gen.phy);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int keystone_usbphy_remove(struct platform_device *pdev)
+{
+ struct keystone_usbphy *k_phy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&k_phy->usb_phy_gen.phy);
+
+ return 0;
+}
+
+static const struct of_device_id keystone_usbphy_ids[] = {
+ { .compatible = "ti,keystone-usbphy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, keystone_usbphy_ids);
+
+static struct platform_driver keystone_usbphy_driver = {
+ .probe = keystone_usbphy_probe,
+ .remove = keystone_usbphy_remove,
+ .driver = {
+ .name = "keystone-usbphy",
+ .owner = THIS_MODULE,
+ .of_match_table = keystone_usbphy_ids,
+ },
+};
+
+module_platform_driver(keystone_usbphy_driver);
+
+MODULE_ALIAS("platform:keystone-usbphy");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("Keystone USB phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 545844b7e796..b42897b6474c 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -63,9 +63,13 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
static int mxs_phy_init(struct usb_phy *phy)
{
+ int ret;
struct mxs_phy *mxs_phy = to_mxs_phy(phy);
- clk_prepare_enable(mxs_phy->clk);
+ ret = clk_prepare_enable(mxs_phy->clk);
+ if (ret)
+ return ret;
+
return mxs_phy_hw_init(mxs_phy);
}
@@ -81,6 +85,7 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
static int mxs_phy_suspend(struct usb_phy *x, int suspend)
{
+ int ret;
struct mxs_phy *mxs_phy = to_mxs_phy(x);
if (suspend) {
@@ -89,7 +94,9 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
x->io_priv + HW_USBPHY_CTRL_SET);
clk_disable_unprepare(mxs_phy->clk);
} else {
- clk_prepare_enable(mxs_phy->clk);
+ ret = clk_prepare_enable(mxs_phy->clk);
+ if (ret)
+ return ret;
writel(BM_USBPHY_CTRL_CLKGATE,
x->io_priv + HW_USBPHY_CTRL_CLR);
writel(0, x->io_priv + HW_USBPHY_PWD);
@@ -160,8 +167,6 @@ static int mxs_phy_probe(struct platform_device *pdev)
mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
mxs_phy->phy.type = USB_PHY_TYPE_USB2;
- ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
-
mxs_phy->clk = clk;
platform_set_drvdata(pdev, mxs_phy);
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
index 09c5ace1edd8..e7253182e47d 100644
--- a/drivers/usb/phy/phy-omap-control.c
+++ b/drivers/usb/phy/phy-omap-control.c
@@ -84,6 +84,20 @@ void omap_control_usb_phy_power(struct device *dev, int on)
else
val |= OMAP_CTRL_USB2_PHY_PD;
break;
+
+ case OMAP_CTRL_TYPE_AM437USB2:
+ if (on) {
+ val &= ~(AM437X_CTRL_USB2_PHY_PD |
+ AM437X_CTRL_USB2_OTG_PD);
+ val |= (AM437X_CTRL_USB2_OTGVDET_EN |
+ AM437X_CTRL_USB2_OTGSESSEND_EN);
+ } else {
+ val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
+ AM437X_CTRL_USB2_OTGSESSEND_EN);
+ val |= (AM437X_CTRL_USB2_PHY_PD |
+ AM437X_CTRL_USB2_OTG_PD);
+ }
+ break;
default:
dev_err(dev, "%s: type %d not recognized\n",
__func__, control_usb->type);
@@ -197,6 +211,7 @@ static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2;
static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
+static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
static const struct of_device_id omap_control_usb_id_table[] = {
{
@@ -215,6 +230,10 @@ static const struct of_device_id omap_control_usb_id_table[] = {
.compatible = "ti,control-phy-dra7usb2",
.data = &dra7usb2_data,
},
+ {
+ .compatible = "ti,control-phy-am437usb2",
+ .data = &am437usb2_data,
+ },
{},
};
MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c
new file mode 100644
index 000000000000..11598cdb3189
--- /dev/null
+++ b/drivers/usb/phy/phy-omap-otg.c
@@ -0,0 +1,169 @@
+/*
+ * OMAP OTG controller driver
+ *
+ * Based on code from tahvo-usb.c and isp1301_omap.c drivers.
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004 David Brownell
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+
+struct otg_device {
+ void __iomem *base;
+ bool id;
+ bool vbus;
+ struct extcon_specific_cable_nb vbus_dev;
+ struct extcon_specific_cable_nb id_dev;
+ struct notifier_block vbus_nb;
+ struct notifier_block id_nb;
+};
+
+#define OMAP_OTG_CTRL 0x0c
+#define OMAP_OTG_ASESSVLD (1 << 20)
+#define OMAP_OTG_BSESSEND (1 << 19)
+#define OMAP_OTG_BSESSVLD (1 << 18)
+#define OMAP_OTG_VBUSVLD (1 << 17)
+#define OMAP_OTG_ID (1 << 16)
+#define OMAP_OTG_XCEIV_OUTPUTS \
+ (OMAP_OTG_ASESSVLD | OMAP_OTG_BSESSEND | OMAP_OTG_BSESSVLD | \
+ OMAP_OTG_VBUSVLD | OMAP_OTG_ID)
+
+static void omap_otg_ctrl(struct otg_device *otg_dev, u32 outputs)
+{
+ u32 l;
+
+ l = readl(otg_dev->base + OMAP_OTG_CTRL);
+ l &= ~OMAP_OTG_XCEIV_OUTPUTS;
+ l |= outputs;
+ writel(l, otg_dev->base + OMAP_OTG_CTRL);
+}
+
+static void omap_otg_set_mode(struct otg_device *otg_dev)
+{
+ if (!otg_dev->id && otg_dev->vbus)
+ /* Set B-session valid. */
+ omap_otg_ctrl(otg_dev, OMAP_OTG_ID | OMAP_OTG_BSESSVLD);
+ else if (otg_dev->vbus)
+ /* Set A-session valid. */
+ omap_otg_ctrl(otg_dev, OMAP_OTG_ASESSVLD);
+ else if (!otg_dev->id)
+ /* Set B-session end to indicate no VBUS. */
+ omap_otg_ctrl(otg_dev, OMAP_OTG_ID | OMAP_OTG_BSESSEND);
+}
+
+static int omap_otg_id_notifier(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct otg_device *otg_dev = container_of(nb, struct otg_device, id_nb);
+
+ otg_dev->id = event;
+ omap_otg_set_mode(otg_dev);
+
+ return NOTIFY_DONE;
+}
+
+static int omap_otg_vbus_notifier(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct otg_device *otg_dev = container_of(nb, struct otg_device,
+ vbus_nb);
+
+ otg_dev->vbus = event;
+ omap_otg_set_mode(otg_dev);
+
+ return NOTIFY_DONE;
+}
+
+static int omap_otg_probe(struct platform_device *pdev)
+{
+ const struct omap_usb_config *config = pdev->dev.platform_data;
+ struct otg_device *otg_dev;
+ struct extcon_dev *extcon;
+ int ret;
+ u32 rev;
+
+ if (!config || !config->extcon)
+ return -ENODEV;
+
+ extcon = extcon_get_extcon_dev(config->extcon);
+ if (!extcon)
+ return -EPROBE_DEFER;
+
+ otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL);
+ if (!otg_dev)
+ return -ENOMEM;
+
+ otg_dev->base = devm_ioremap_resource(&pdev->dev, &pdev->resource[0]);
+ if (IS_ERR(otg_dev->base))
+ return PTR_ERR(otg_dev->base);
+
+ otg_dev->id_nb.notifier_call = omap_otg_id_notifier;
+ otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier;
+
+ ret = extcon_register_interest(&otg_dev->id_dev, config->extcon,
+ "USB-HOST", &otg_dev->id_nb);
+ if (ret)
+ return ret;
+
+ ret = extcon_register_interest(&otg_dev->vbus_dev, config->extcon,
+ "USB", &otg_dev->vbus_nb);
+ if (ret) {
+ extcon_unregister_interest(&otg_dev->id_dev);
+ return ret;
+ }
+
+ otg_dev->id = extcon_get_cable_state(extcon, "USB-HOST");
+ otg_dev->vbus = extcon_get_cable_state(extcon, "USB");
+ omap_otg_set_mode(otg_dev);
+
+ rev = readl(otg_dev->base);
+
+ dev_info(&pdev->dev,
+ "OMAP USB OTG controller rev %d.%d (%s, id=%d, vbus=%d)\n",
+ (rev >> 4) & 0xf, rev & 0xf, config->extcon, otg_dev->id,
+ otg_dev->vbus);
+
+ return 0;
+}
+
+static int omap_otg_remove(struct platform_device *pdev)
+{
+ struct otg_device *otg_dev = platform_get_drvdata(pdev);
+
+ extcon_unregister_interest(&otg_dev->id_dev);
+ extcon_unregister_interest(&otg_dev->vbus_dev);
+
+ return 0;
+}
+
+static struct platform_driver omap_otg_driver = {
+ .probe = omap_otg_probe,
+ .remove = omap_otg_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "omap_otg",
+ },
+};
+module_platform_driver(omap_otg_driver);
+
+MODULE_DESCRIPTION("OMAP USB OTG controller driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c
index db3ab34cddb4..551e0a6c0e22 100644
--- a/drivers/usb/phy/phy-rcar-gen2-usb.c
+++ b/drivers/usb/phy/phy-rcar-gen2-usb.c
@@ -213,7 +213,7 @@ static int rcar_gen2_usb_phy_probe(struct platform_device *pdev)
priv->phy.shutdown = rcar_gen2_usb_phy_shutdown;
priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend;
- retval = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+ retval = usb_add_phy_dev(&priv->phy);
if (retval < 0) {
dev_err(dev, "Failed to add USB phy\n");
return retval;
diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
new file mode 100644
index 000000000000..cc61ee44b911
--- /dev/null
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -0,0 +1,457 @@
+/*
+ * Tahvo USB transceiver driver
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * Parts copied from isp1301_omap.c.
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004 David Brownell
+ *
+ * Original driver written by Juha Yrjölä, Tony Lindgren and Timo Teräs.
+ * Modified for Retu/Tahvo MFD by Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/extcon.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb/otg.h>
+#include <linux/mfd/retu.h>
+#include <linux/usb/gadget.h>
+#include <linux/platform_device.h>
+
+#define DRIVER_NAME "tahvo-usb"
+
+#define TAHVO_REG_IDSR 0x02
+#define TAHVO_REG_USBR 0x06
+
+#define USBR_SLAVE_CONTROL (1 << 8)
+#define USBR_VPPVIO_SW (1 << 7)
+#define USBR_SPEED (1 << 6)
+#define USBR_REGOUT (1 << 5)
+#define USBR_MASTER_SW2 (1 << 4)
+#define USBR_MASTER_SW1 (1 << 3)
+#define USBR_SLAVE_SW (1 << 2)
+#define USBR_NSUSPEND (1 << 1)
+#define USBR_SEMODE (1 << 0)
+
+#define TAHVO_MODE_HOST 0
+#define TAHVO_MODE_PERIPHERAL 1
+
+struct tahvo_usb {
+ struct platform_device *pt_dev;
+ struct usb_phy phy;
+ int vbus_state;
+ struct mutex serialize;
+ struct clk *ick;
+ int irq;
+ int tahvo_mode;
+ struct extcon_dev extcon;
+};
+
+static const char *tahvo_cable[] = {
+ "USB-HOST",
+ "USB",
+ NULL,
+};
+
+static ssize_t vbus_state_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct tahvo_usb *tu = dev_get_drvdata(device);
+ return sprintf(buf, "%s\n", tu->vbus_state ? "on" : "off");
+}
+static DEVICE_ATTR(vbus, 0444, vbus_state_show, NULL);
+
+static void check_vbus_state(struct tahvo_usb *tu)
+{
+ struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+ int reg, prev_state;
+
+ reg = retu_read(rdev, TAHVO_REG_IDSR);
+ if (reg & TAHVO_STAT_VBUS) {
+ switch (tu->phy.state) {
+ case OTG_STATE_B_IDLE:
+ /* Enable the gadget driver */
+ if (tu->phy.otg->gadget)
+ usb_gadget_vbus_connect(tu->phy.otg->gadget);
+ tu->phy.state = OTG_STATE_B_PERIPHERAL;
+ break;
+ case OTG_STATE_A_IDLE:
+ /*
+ * Session is now valid assuming the USB hub is driving
+ * Vbus.
+ */
+ tu->phy.state = OTG_STATE_A_HOST;
+ break;
+ default:
+ break;
+ }
+ dev_info(&tu->pt_dev->dev, "USB cable connected\n");
+ } else {
+ switch (tu->phy.state) {
+ case OTG_STATE_B_PERIPHERAL:
+ if (tu->phy.otg->gadget)
+ usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
+ tu->phy.state = OTG_STATE_B_IDLE;
+ break;
+ case OTG_STATE_A_HOST:
+ tu->phy.state = OTG_STATE_A_IDLE;
+ break;
+ default:
+ break;
+ }
+ dev_info(&tu->pt_dev->dev, "USB cable disconnected\n");
+ }
+
+ prev_state = tu->vbus_state;
+ tu->vbus_state = reg & TAHVO_STAT_VBUS;
+ if (prev_state != tu->vbus_state) {
+ extcon_set_cable_state(&tu->extcon, "USB", tu->vbus_state);
+ sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
+ }
+}
+
+static void tahvo_usb_become_host(struct tahvo_usb *tu)
+{
+ struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+
+ extcon_set_cable_state(&tu->extcon, "USB-HOST", true);
+
+ /* Power up the transceiver in USB host mode */
+ retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
+ USBR_MASTER_SW2 | USBR_MASTER_SW1);
+ tu->phy.state = OTG_STATE_A_IDLE;
+
+ check_vbus_state(tu);
+}
+
+static void tahvo_usb_stop_host(struct tahvo_usb *tu)
+{
+ tu->phy.state = OTG_STATE_A_IDLE;
+}
+
+static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
+{
+ struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+
+ extcon_set_cable_state(&tu->extcon, "USB-HOST", false);
+
+ /* Power up transceiver and set it in USB peripheral mode */
+ retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
+ USBR_NSUSPEND | USBR_SLAVE_SW);
+ tu->phy.state = OTG_STATE_B_IDLE;
+
+ check_vbus_state(tu);
+}
+
+static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
+{
+ if (tu->phy.otg->gadget)
+ usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
+ tu->phy.state = OTG_STATE_B_IDLE;
+}
+
+static void tahvo_usb_power_off(struct tahvo_usb *tu)
+{
+ struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+
+ /* Disable gadget controller if any */
+ if (tu->phy.otg->gadget)
+ usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
+
+ /* Power off transceiver */
+ retu_write(rdev, TAHVO_REG_USBR, 0);
+ tu->phy.state = OTG_STATE_UNDEFINED;
+}
+
+static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend)
+{
+ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, phy);
+ struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+ u16 w;
+
+ dev_dbg(&tu->pt_dev->dev, "%s\n", __func__);
+
+ w = retu_read(rdev, TAHVO_REG_USBR);
+ if (suspend)
+ w &= ~USBR_NSUSPEND;
+ else
+ w |= USBR_NSUSPEND;
+ retu_write(rdev, TAHVO_REG_USBR, w);
+
+ return 0;
+}
+
+static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ struct tahvo_usb *tu = container_of(otg->phy, struct tahvo_usb, phy);
+
+ dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, host);
+
+ mutex_lock(&tu->serialize);
+
+ if (host == NULL) {
+ if (tu->tahvo_mode == TAHVO_MODE_HOST)
+ tahvo_usb_power_off(tu);
+ otg->host = NULL;
+ mutex_unlock(&tu->serialize);
+ return 0;
+ }
+
+ if (tu->tahvo_mode == TAHVO_MODE_HOST) {
+ otg->host = NULL;
+ tahvo_usb_become_host(tu);
+ }
+
+ otg->host = host;
+
+ mutex_unlock(&tu->serialize);
+
+ return 0;
+}
+
+static int tahvo_usb_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ struct tahvo_usb *tu = container_of(otg->phy, struct tahvo_usb, phy);
+
+ dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, gadget);
+
+ mutex_lock(&tu->serialize);
+
+ if (!gadget) {
+ if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
+ tahvo_usb_power_off(tu);
+ tu->phy.otg->gadget = NULL;
+ mutex_unlock(&tu->serialize);
+ return 0;
+ }
+
+ tu->phy.otg->gadget = gadget;
+ if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
+ tahvo_usb_become_peripheral(tu);
+
+ mutex_unlock(&tu->serialize);
+
+ return 0;
+}
+
+static irqreturn_t tahvo_usb_vbus_interrupt(int irq, void *_tu)
+{
+ struct tahvo_usb *tu = _tu;
+
+ mutex_lock(&tu->serialize);
+ check_vbus_state(tu);
+ mutex_unlock(&tu->serialize);
+
+ return IRQ_HANDLED;
+}
+
+static ssize_t otg_mode_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct tahvo_usb *tu = dev_get_drvdata(device);
+
+ switch (tu->tahvo_mode) {
+ case TAHVO_MODE_HOST:
+ return sprintf(buf, "host\n");
+ case TAHVO_MODE_PERIPHERAL:
+ return sprintf(buf, "peripheral\n");
+ }
+
+ return -EINVAL;
+}
+
+static ssize_t otg_mode_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct tahvo_usb *tu = dev_get_drvdata(device);
+ int r;
+
+ mutex_lock(&tu->serialize);
+ if (count >= 4 && strncmp(buf, "host", 4) == 0) {
+ if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
+ tahvo_usb_stop_peripheral(tu);
+ tu->tahvo_mode = TAHVO_MODE_HOST;
+ if (tu->phy.otg->host) {
+ dev_info(device, "HOST mode: host controller present\n");
+ tahvo_usb_become_host(tu);
+ } else {
+ dev_info(device, "HOST mode: no host controller, powering off\n");
+ tahvo_usb_power_off(tu);
+ }
+ r = strlen(buf);
+ } else if (count >= 10 && strncmp(buf, "peripheral", 10) == 0) {
+ if (tu->tahvo_mode == TAHVO_MODE_HOST)
+ tahvo_usb_stop_host(tu);
+ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
+ if (tu->phy.otg->gadget) {
+ dev_info(device, "PERIPHERAL mode: gadget driver present\n");
+ tahvo_usb_become_peripheral(tu);
+ } else {
+ dev_info(device, "PERIPHERAL mode: no gadget driver, powering off\n");
+ tahvo_usb_power_off(tu);
+ }
+ r = strlen(buf);
+ } else {
+ r = -EINVAL;
+ }
+ mutex_unlock(&tu->serialize);
+
+ return r;
+}
+static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store);
+
+static struct attribute *tahvo_attributes[] = {
+ &dev_attr_vbus.attr,
+ &dev_attr_otg_mode.attr,
+ NULL
+};
+
+static struct attribute_group tahvo_attr_group = {
+ .attrs = tahvo_attributes,
+};
+
+static int tahvo_usb_probe(struct platform_device *pdev)
+{
+ struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent);
+ struct tahvo_usb *tu;
+ int ret;
+
+ tu = devm_kzalloc(&pdev->dev, sizeof(*tu), GFP_KERNEL);
+ if (!tu)
+ return -ENOMEM;
+
+ tu->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*tu->phy.otg),
+ GFP_KERNEL);
+ if (!tu->phy.otg)
+ return -ENOMEM;
+
+ tu->pt_dev = pdev;
+
+ /* Default mode */
+#ifdef CONFIG_TAHVO_USB_HOST_BY_DEFAULT
+ tu->tahvo_mode = TAHVO_MODE_HOST;
+#else
+ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
+#endif
+
+ mutex_init(&tu->serialize);
+
+ tu->ick = devm_clk_get(&pdev->dev, "usb_l4_ick");
+ if (!IS_ERR(tu->ick))
+ clk_enable(tu->ick);
+
+ /*
+ * Set initial state, so that we generate kevents only on state changes.
+ */
+ tu->vbus_state = retu_read(rdev, TAHVO_REG_IDSR) & TAHVO_STAT_VBUS;
+
+ tu->extcon.name = DRIVER_NAME;
+ tu->extcon.supported_cable = tahvo_cable;
+ tu->extcon.dev.parent = &pdev->dev;
+
+ ret = extcon_dev_register(&tu->extcon);
+ if (ret) {
+ dev_err(&pdev->dev, "could not register extcon device: %d\n",
+ ret);
+ goto err_disable_clk;
+ }
+
+ /* Set the initial cable state. */
+ extcon_set_cable_state(&tu->extcon, "USB-HOST",
+ tu->tahvo_mode == TAHVO_MODE_HOST);
+ extcon_set_cable_state(&tu->extcon, "USB", tu->vbus_state);
+
+ /* Create OTG interface */
+ tahvo_usb_power_off(tu);
+ tu->phy.dev = &pdev->dev;
+ tu->phy.state = OTG_STATE_UNDEFINED;
+ tu->phy.label = DRIVER_NAME;
+ tu->phy.set_suspend = tahvo_usb_set_suspend;
+
+ tu->phy.otg->phy = &tu->phy;
+ tu->phy.otg->set_host = tahvo_usb_set_host;
+ tu->phy.otg->set_peripheral = tahvo_usb_set_peripheral;
+
+ ret = usb_add_phy(&tu->phy, USB_PHY_TYPE_USB2);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot register USB transceiver: %d\n",
+ ret);
+ goto err_extcon_unreg;
+ }
+
+ dev_set_drvdata(&pdev->dev, tu);
+
+ tu->irq = platform_get_irq(pdev, 0);
+ ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt, 0,
+ "tahvo-vbus", tu);
+ if (ret) {
+ dev_err(&pdev->dev, "could not register tahvo-vbus irq: %d\n",
+ ret);
+ goto err_remove_phy;
+ }
+
+ /* Attributes */
+ ret = sysfs_create_group(&pdev->dev.kobj, &tahvo_attr_group);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot create sysfs group: %d\n", ret);
+ goto err_free_irq;
+ }
+
+ return 0;
+
+err_free_irq:
+ free_irq(tu->irq, tu);
+err_remove_phy:
+ usb_remove_phy(&tu->phy);
+err_extcon_unreg:
+ extcon_dev_unregister(&tu->extcon);
+err_disable_clk:
+ if (!IS_ERR(tu->ick))
+ clk_disable(tu->ick);
+
+ return ret;
+}
+
+static int tahvo_usb_remove(struct platform_device *pdev)
+{
+ struct tahvo_usb *tu = platform_get_drvdata(pdev);
+
+ sysfs_remove_group(&pdev->dev.kobj, &tahvo_attr_group);
+ free_irq(tu->irq, tu);
+ usb_remove_phy(&tu->phy);
+ extcon_dev_unregister(&tu->extcon);
+ if (!IS_ERR(tu->ick))
+ clk_disable(tu->ick);
+
+ return 0;
+}
+
+static struct platform_driver tahvo_usb_driver = {
+ .probe = tahvo_usb_probe,
+ .remove = tahvo_usb_remove,
+ .driver = {
+ .name = "tahvo-usb",
+ .owner = THIS_MODULE,
+ },
+};
+module_platform_driver(tahvo_usb_driver);
+
+MODULE_DESCRIPTION("Tahvo USB transceiver driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index bad57ce77ba5..214172b68d5d 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -328,7 +328,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct twl4030_usb_data *pdata = dev_get_platdata(dev);
- twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL);
+ twl = devm_kzalloc(dev, sizeof(*twl), GFP_KERNEL);
if (!twl)
return -ENOMEM;
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index 1b74523e1fee..e6f61e4361df 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -329,6 +329,8 @@ int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
return -EINVAL;
}
+ ATOMIC_INIT_NOTIFIER_HEAD(&x->notifier);
+
spin_lock_irqsave(&phy_lock, flags);
list_for_each_entry(phy, &phy_list, head) {
@@ -367,6 +369,8 @@ int usb_add_phy_dev(struct usb_phy *x)
return -EINVAL;
}
+ ATOMIC_INIT_NOTIFIER_HEAD(&x->notifier);
+
spin_lock_irqsave(&phy_lock, flags);
list_for_each_entry(phy_bind, &phy_bind_list, list)
if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev))))