Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of serial and tty driver updates for 6.3-rc1.

  Once again, Jiri and Ilpo have done a number of core vt and tty/serial
  layer cleanups that were much needed and appreciated. Other than that,
  it's just a bunch of little tty/serial driver updates:

   - qcom-geni-serial driver updates

   - liteuart driver updates

   - hvcs driver cleanups

   - n_gsm updates and additions for new features

   - more 8250 device support added

   - fpga/dfl update and additions

   - imx serial driver updates

   - fsl_lpuart updates

   - other tiny fixes and updates for serial drivers

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
  tty: n_gsm: add keep alive support
  serial: imx: remove a redundant check
  dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
  soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
  tty: n_gsm: add TIOCMIWAIT support
  tty: n_gsm: add RING/CD control support
  tty: n_gsm: mark unusable ioctl structure fields accordingly
  serial: imx: get rid of registers shadowing
  serial: imx: refine local variables in rxint()
  serial: imx: stop using USR2 in FIFO reading loop
  serial: imx: remove redundant USR2 read from FIFO reading loop
  serial: imx: do not break from FIFO reading loop prematurely
  serial: imx: do not sysrq broken chars
  serial: imx: work-around for hardware RX flood
  serial: imx: factor-out common code to imx_uart_soft_reset()
  serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
  serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
  serial: 8250_pci1xxxx: Add driver for quad-uart support
  serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
  tty: pcn_uart: fix memory leak with using debugfs_lookup()
  ...

1 files changed, 15 insertions, 20 deletions

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 94d4ed0331c9..0a2c47df01f4 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -2266,7 +2266,7 @@ static int fbcon_debug_leave(struct vc_data *vc)
 	return 0;
 }
 
-static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
+static int fbcon_get_font(struct vc_data *vc, struct console_font *font, unsigned int vpitch)
 {
 	u8 *fontdata = vc->vc_font.data;
 	u8 *data = font->data;
@@ -2274,6 +2274,8 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 
 	font->width = vc->vc_font.width;
 	font->height = vc->vc_font.height;
+	if (font->height > vpitch)
+		return -ENOSPC;
 	font->charcount = vc->vc_hi_font_mask ? 512 : 256;
 	if (!font->data)
 		return 0;
@@ -2285,8 +2287,8 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 
 		for (i = 0; i < font->charcount; i++) {
 			memcpy(data, fontdata, j);
-			memset(data + j, 0, 32 - j);
-			data += 32;
+			memset(data + j, 0, vpitch - j);
+			data += vpitch;
 			fontdata += j;
 		}
 	} else if (font->width <= 16) {
@@ -2296,8 +2298,8 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 
 		for (i = 0; i < font->charcount; i++) {
 			memcpy(data, fontdata, j);
-			memset(data + j, 0, 64 - j);
-			data += 64;
+			memset(data + j, 0, 2*vpitch - j);
+			data += 2*vpitch;
 			fontdata += j;
 		}
 	} else if (font->width <= 24) {
@@ -2311,8 +2313,8 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 				*data++ = fontdata[2];
 				fontdata += sizeof(u32);
 			}
-			memset(data, 0, 3 * (32 - j));
-			data += 3 * (32 - j);
+			memset(data, 0, 3 * (vpitch - j));
+			data += 3 * (vpitch - j);
 		}
 	} else {
 		j = vc->vc_font.height * 4;
@@ -2321,8 +2323,8 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 
 		for (i = 0; i < font->charcount; i++) {
 			memcpy(data, fontdata, j);
-			memset(data + j, 0, 128 - j);
-			data += 128;
+			memset(data + j, 0, 4 * vpitch - j);
+			data += 4 * vpitch;
 			fontdata += j;
 		}
 	}
@@ -2457,19 +2459,12 @@ err_out:
 }
 
 /*
- *  User asked to set font; we are guaranteed that
- *	a) width and height are in range 1..32
- *	b) charcount does not exceed 512
- *  but lets not assume that, since someone might someday want to use larger
- *  fonts. And charcount of 512 is small for unicode support.
- *
- *  However, user space gives the font in 32 rows , regardless of
- *  actual font height. So a new API is needed if support for larger fonts
- *  is ever implemented.
+ *  User asked to set font; we are guaranteed that charcount does not exceed 512
+ *  but lets not assume that, since charcount of 512 is small for unicode support.
  */
 
 static int fbcon_set_font(struct vc_data *vc, struct console_font *font,
-			  unsigned int flags)
+			  unsigned int vpitch, unsigned int flags)
 {
 	struct fb_info *info = fbcon_info_from_console(vc->vc_num);
 	unsigned charcount = font->charcount;
@@ -2515,7 +2510,7 @@ static int fbcon_set_font(struct vc_data *vc, struct console_font *font,
 	FNTSIZE(new_data) = size;
 	REFCOUNT(new_data) = 0;	/* usage counter */
 	for (i=0; i< charcount; i++) {
-		memcpy(new_data + i*h*pitch, data +  i*32*pitch, h*pitch);
+		memcpy(new_data + i*h*pitch, data +  i*vpitch*pitch, h*pitch);
 	}
 
 	/* Since linux has a nice crc32 function use it for counting font