Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull more ARM multiplatform updates from Arnd Bergmann:
 "The second part of the multiplatform changes now converts the
  Intel/Marvell PXA platform along with the rest. The patches went
  through several rebases before the merge window as bugs were found, so
  they remained separate.

  This has to touch a lot of drivers, in particular the touchscreen,
  pcmcia, sound and clk bits, to detach the driver files from the
  platform and board specific header files"

* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  ARM: pxa/mmp: remove traces of plat-pxa
  ARM: pxa: convert to multiplatform
  ARM: pxa/sa1100: move I/O space to PCI_IOBASE
  ARM: pxa: remove support for MTD_XIP
  ARM: pxa: move mach/*.h to mach-pxa/
  ARM: PXA: fix multi-cpu build of xsc3
  ARM: pxa: move plat-pxa to drivers/soc/
  ARM: mmp: rename pxa_register_device
  ARM: mmp: remove tavorevb board support
  ARM: pxa: remove unused mach/bitfield.h
  ARM: pxa: move clk register definitions to driver
  ARM: pxa: move smemc register access from clk to platform
  cpufreq: pxa3: move clk register access to clk driver
  ARM: pxa: remove get_clk_frequency_khz()
  ARM: pxa: pcmcia: move smemc configuration back to arch
  ASoC: pxa: i2s: use normal MMIO accessors
  ASoC: pxa: ac97: use normal MMIO accessors
  ASoC: pxa: use pdev resource for FIFO regs
  Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
  Input: wm97xx - switch to using threaded IRQ
  ...

49 files changed, 1372 insertions, 2059 deletions

diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
index 2448441571ed..400e65190904 100644
--- a/drivers/ata/pata_palmld.c
+++ b/drivers/ata/pata_palmld.c
@@ -25,7 +25,6 @@
 #include <linux/gpio/consumer.h>
 
 #include <scsi/scsi_host.h>
-#include <mach/palmld.h>
 
 #define DRV_NAME "pata_palmld"
 
@@ -63,7 +62,7 @@ static int palmld_pata_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* remap drive's physical memory address */
-	mem = devm_ioremap(dev, PALMLD_IDE_PHYS, 0x1000);
+	mem = devm_platform_ioremap_resource(pdev, 0);
 	if (!mem)
 		return -ENOMEM;
 
diff --git a/drivers/clk/pxa/clk-pxa.c b/drivers/clk/pxa/clk-pxa.c
index cfc79f942b07..03de634efc52 100644
--- a/drivers/clk/pxa/clk-pxa.c
+++ b/drivers/clk/pxa/clk-pxa.c
@@ -11,6 +11,7 @@
 #include <linux/clkdev.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/soc/pxa/smemc.h>
 
 #include <dt-bindings/clock/pxa-clock.h>
 #include "clk-pxa.h"
@@ -94,7 +95,8 @@ void __init clkdev_pxa_register(int ckid, const char *con_id,
 		clk_register_clkdev(clk, con_id, dev_id);
 }
 
-int __init clk_pxa_cken_init(const struct desc_clk_cken *clks, int nb_clks)
+int __init clk_pxa_cken_init(const struct desc_clk_cken *clks,
+			     int nb_clks, void __iomem *clk_regs)
 {
 	int i;
 	struct pxa_clk *pxa_clk;
@@ -106,6 +108,7 @@ int __init clk_pxa_cken_init(const struct desc_clk_cken *clks, int nb_clks)
 		pxa_clk->lp = clks[i].lp;
 		pxa_clk->hp = clks[i].hp;
 		pxa_clk->gate = clks[i].gate;
+		pxa_clk->gate.reg = clk_regs + clks[i].cken_reg;
 		pxa_clk->gate.lock = &pxa_clk_lock;
 		clk = clk_register_composite(NULL, clks[i].name,
 					     clks[i].parent_names, 2,
@@ -150,12 +153,13 @@ void pxa2xx_core_turbo_switch(bool on)
 }
 
 void pxa2xx_cpll_change(struct pxa2xx_freq *freq,
-			u32 (*mdrefr_dri)(unsigned int), void __iomem *mdrefr,
+			u32 (*mdrefr_dri)(unsigned int),
 			void __iomem *cccr)
 {
 	unsigned int clkcfg = freq->clkcfg;
 	unsigned int unused, preset_mdrefr, postset_mdrefr;
 	unsigned long flags;
+	void __iomem *mdrefr = pxa_smemc_get_mdrefr();
 
 	local_irq_save(flags);
 
diff --git a/drivers/clk/pxa/clk-pxa.h b/drivers/clk/pxa/clk-pxa.h
index 5768e0f728ce..7ec2d2821d8f 100644
--- a/drivers/clk/pxa/clk-pxa.h
+++ b/drivers/clk/pxa/clk-pxa.h
@@ -105,6 +105,7 @@
 struct desc_clk_cken {
 	struct clk_hw hw;
 	int ckid;
+	int cken_reg;
 	const char *name;
 	const char *dev_id;
 	const char *con_id;
@@ -119,11 +120,12 @@ struct desc_clk_cken {
 #define PXA_CKEN(_dev_id, _con_id, _name, parents, _mult_lp, _div_lp,	\
 		 _mult_hp, _div_hp, is_lp, _cken_reg, _cken_bit, flag)	\
 	{ .ckid = CLK_ ## _name, .name = #_name,			\
+	  .cken_reg = _cken_reg,					\
 	  .dev_id = _dev_id, .con_id = _con_id,	.parent_names = parents,\
 	  .lp = { .mult = _mult_lp, .div = _div_lp },			\
 	  .hp = { .mult = _mult_hp, .div = _div_hp },			\
 	  .is_in_low_power = is_lp,					\
-	  .gate = { .reg = (void __iomem *)_cken_reg, .bit_idx = _cken_bit }, \
+	  .gate = { .bit_idx = _cken_bit }, \
 	  .flags = flag,						\
 	}
 #define PXA_CKEN_1RATE(dev_id, con_id, name, parents, cken_reg,		\
@@ -146,12 +148,13 @@ static inline int dummy_clk_set_parent(struct clk_hw *hw, u8 index)
 
 extern void clkdev_pxa_register(int ckid, const char *con_id,
 				const char *dev_id, struct clk *clk);
-extern int clk_pxa_cken_init(const struct desc_clk_cken *clks, int nb_clks);
+extern int clk_pxa_cken_init(const struct desc_clk_cken *clks,
+			     int nb_clks, void __iomem *clk_regs);
 void clk_pxa_dt_common_init(struct device_node *np);
 
 void pxa2xx_core_turbo_switch(bool on);
 void pxa2xx_cpll_change(struct pxa2xx_freq *freq,
-			u32 (*mdrefr_dri)(unsigned int), void __iomem *mdrefr,
+			u32 (*mdrefr_dri)(unsigned int),
 			void __iomem *cccr);
 int pxa2xx_determine_rate(struct clk_rate_request *req,
 			  struct pxa2xx_freq *freqs,  int nb_freqs);
diff --git a/drivers/clk/pxa/clk-pxa25x.c b/drivers/clk/pxa/clk-pxa25x.c
index d0f957996acb..93d5907b8530 100644
--- a/drivers/clk/pxa/clk-pxa25x.c
+++ b/drivers/clk/pxa/clk-pxa25x.c
@@ -14,11 +14,11 @@
 #include <linux/clkdev.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/smemc.h>
+#include <linux/soc/pxa/smemc.h>
 
 #include <dt-bindings/clock/pxa-clock.h>
 #include "clk-pxa.h"
+#include "clk-pxa2xx.h"
 
 #define KHz 1000
 #define MHz (1000 * 1000)
@@ -33,15 +33,13 @@ enum {
 	 ((T) ? CLKCFG_TURBO : 0))
 #define PXA25x_CCCR(N2, M, L) (N2 << 7 | M << 5 | L)
 
-#define MDCNFG_DRAC2(mdcnfg)	(((mdcnfg) >> 21) & 0x3)
-#define MDCNFG_DRAC0(mdcnfg)	(((mdcnfg) >> 5) & 0x3)
-
 /* Define the refresh period in mSec for the SDRAM and the number of rows */
 #define SDRAM_TREF	64	/* standard 64ms SDRAM */
 
 /*
  * Various clock factors driven by the CCCR register.
  */
+static void __iomem *clk_regs;
 
 /* Crystal Frequency to Memory Frequency Multiplier (L) */
 static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, };
@@ -57,30 +55,9 @@ static const char * const get_freq_khz[] = {
 	"core", "run", "cpll", "memory"
 };
 
-static int get_sdram_rows(void)
-{
-	static int sdram_rows;
-	unsigned int drac2 = 0, drac0 = 0;
-	u32 mdcnfg;
-
-	if (sdram_rows)
-		return sdram_rows;
-
-	mdcnfg = readl_relaxed(MDCNFG);
-
-	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
-		drac2 = MDCNFG_DRAC2(mdcnfg);
-
-	if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
-		drac0 = MDCNFG_DRAC0(mdcnfg);
-
-	sdram_rows = 1 << (11 + max(drac0, drac2));
-	return sdram_rows;
-}
-
 static u32 mdrefr_dri(unsigned int freq_khz)
 {
-	u32 interval = freq_khz * SDRAM_TREF / get_sdram_rows();
+	u32 interval = freq_khz * SDRAM_TREF / pxa2xx_smemc_get_sdram_rows();
 
 	return interval / 32;
 }
@@ -121,7 +98,7 @@ unsigned int pxa25x_get_clk_frequency_khz(int info)
 static unsigned long clk_pxa25x_memory_get_rate(struct clk_hw *hw,
 						unsigned long parent_rate)
 {
-	unsigned long cccr = readl(CCCR);
+	unsigned long cccr = readl(clk_regs + CCCR);
 	unsigned int m = M_clk_mult[(cccr >> 5) & 0x03];
 
 	return parent_rate / m;
@@ -225,7 +202,7 @@ MUX_OPS(clk_pxa25x_core, "core", CLK_SET_RATE_PARENT);
 static unsigned long clk_pxa25x_run_get_rate(struct clk_hw *hw,
 					     unsigned long parent_rate)
 {
-	unsigned long cccr = readl(CCCR);
+	unsigned long cccr = readl(clk_regs + CCCR);
 	unsigned int n2 = N2_clk_mult[(cccr >> 7) & 0x07];
 
 	return (parent_rate / n2) * 2;
@@ -236,7 +213,7 @@ RATE_RO_OPS(clk_pxa25x_run, "run");
 static unsigned long clk_pxa25x_cpll_get_rate(struct clk_hw *hw,
 	unsigned long parent_rate)
 {
-	unsigned long clkcfg, cccr = readl(CCCR);
+	unsigned long clkcfg, cccr = readl(clk_regs + CCCR);
 	unsigned int l, m, n2, t;
 
 	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
@@ -268,7 +245,7 @@ static int clk_pxa25x_cpll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (i >= ARRAY_SIZE(pxa25x_freqs))
 		return -EINVAL;
 
-	pxa2xx_cpll_change(&pxa25x_freqs[i], mdrefr_dri, MDREFR, CCCR);
+	pxa2xx_cpll_change(&pxa25x_freqs[i], mdrefr_dri, clk_regs + CCCR);
 
 	return 0;
 }
@@ -345,16 +322,17 @@ static void __init pxa25x_dummy_clocks_init(void)
 	}
 }
 
-int __init pxa25x_clocks_init(void)
+int __init pxa25x_clocks_init(void __iomem *regs)
 {
+	clk_regs = regs;
 	pxa25x_base_clocks_init();
 	pxa25x_dummy_clocks_init();
-	return clk_pxa_cken_init(pxa25x_clocks, ARRAY_SIZE(pxa25x_clocks));
+	return clk_pxa_cken_init(pxa25x_clocks, ARRAY_SIZE(pxa25x_clocks), clk_regs);
 }
 
 static void __init pxa25x_dt_clocks_init(struct device_node *np)
 {
-	pxa25x_clocks_init();
+	pxa25x_clocks_init(ioremap(0x41300000ul, 0x10));
 	clk_pxa_dt_common_init(np);
 }
 CLK_OF_DECLARE(pxa25x_clks, "marvell,pxa250-core-clocks",
diff --git a/drivers/clk/pxa/clk-pxa27x.c b/drivers/clk/pxa/clk-pxa27x.c
index 7b123105b5de..116c6ac666e3 100644
--- a/drivers/clk/pxa/clk-pxa27x.c
+++ b/drivers/clk/pxa/clk-pxa27x.c
@@ -7,16 +7,15 @@
  * Heavily inspired from former arch/arm/mach-pxa/clock.c.
  */
 #include <linux/clk-provider.h>
-#include <mach/pxa2xx-regs.h>
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/of.h>
-
-#include <mach/smemc.h>
+#include <linux/soc/pxa/smemc.h>
 
 #include <dt-bindings/clock/pxa-clock.h>
 #include "clk-pxa.h"
+#include "clk-pxa2xx.h"
 
 #define KHz 1000
 #define MHz (1000 * 1000)
@@ -50,41 +49,19 @@ enum {
 	 ((T)  ? CLKCFG_TURBO : 0))
 #define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
 
-#define MDCNFG_DRAC2(mdcnfg)	(((mdcnfg) >> 21) & 0x3)
-#define MDCNFG_DRAC0(mdcnfg)	(((mdcnfg) >> 5) & 0x3)
-
 /* Define the refresh period in mSec for the SDRAM and the number of rows */
 #define SDRAM_TREF	64	/* standard 64ms SDRAM */
 
+static void __iomem *clk_regs;
+
 static const char * const get_freq_khz[] = {
 	"core", "run", "cpll", "memory",
 	"system_bus"
 };
 
-static int get_sdram_rows(void)
-{
-	static int sdram_rows;
-	unsigned int drac2 = 0, drac0 = 0;
-	u32 mdcnfg;
-
-	if (sdram_rows)
-		return sdram_rows;
-
-	mdcnfg = readl_relaxed(MDCNFG);
-
-	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
-		drac2 = MDCNFG_DRAC2(mdcnfg);
-
-	if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
-		drac0 = MDCNFG_DRAC0(mdcnfg);
-
-	sdram_rows = 1 << (11 + max(drac0, drac2));
-	return sdram_rows;
-}
-
 static u32 mdrefr_dri(unsigned int freq_khz)
 {
-	u32 interval = freq_khz * SDRAM_TREF / get_sdram_rows();
+	u32 interval = freq_khz * SDRAM_TREF / pxa2xx_smemc_get_sdram_rows();
 
 	return (interval - 31) / 32;
 }
@@ -124,7 +101,7 @@ unsigned int pxa27x_get_clk_frequency_khz(int info)
 
 bool pxa27x_is_ppll_disabled(void)
 {
-	unsigned long ccsr = readl(CCSR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
 
 	return ccsr & (1 << CCCR_PPDIS_BIT);
 }
@@ -226,7 +203,7 @@ static unsigned long clk_pxa27x_cpll_get_rate(struct clk_hw *hw,
 	unsigned long clkcfg;
 	unsigned int t, ht;
 	unsigned int l, L, n2, N;
-	unsigned long ccsr = readl(CCSR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
 
 	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
 	t  = clkcfg & (1 << 0);
@@ -260,7 +237,7 @@ static int clk_pxa27x_cpll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (i >= ARRAY_SIZE(pxa27x_freqs))
 		return -EINVAL;
 
-	pxa2xx_cpll_change(&pxa27x_freqs[i], mdrefr_dri, MDREFR, CCCR);
+	pxa2xx_cpll_change(&pxa27x_freqs[i], mdrefr_dri, clk_regs + CCCR);
 	return 0;
 }
 
@@ -271,8 +248,8 @@ static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw,
 						  unsigned long parent_rate)
 {
 	unsigned int l, osc_forced;
-	unsigned long ccsr = readl(CCSR);
-	unsigned long cccr = readl(CCCR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
+	unsigned long cccr = readl(clk_regs + CCCR);
 
 	l  = ccsr & CCSR_L_MASK;
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
@@ -293,7 +270,7 @@ static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw,
 static u8 clk_pxa27x_lcd_base_get_parent(struct clk_hw *hw)
 {
 	unsigned int osc_forced;
-	unsigned long ccsr = readl(CCSR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	if (osc_forced)
@@ -322,7 +299,7 @@ static u8 clk_pxa27x_core_get_parent(struct clk_hw *hw)
 {
 	unsigned long clkcfg;
 	unsigned int t, ht, osc_forced;
-	unsigned long ccsr = readl(CCSR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	if (osc_forced)
@@ -359,7 +336,7 @@ MUX_OPS(clk_pxa27x_core, "core", CLK_SET_RATE_PARENT);
 static unsigned long clk_pxa27x_run_get_rate(struct clk_hw *hw,
 					     unsigned long parent_rate)
 {
-	unsigned long ccsr = readl(CCSR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
 	unsigned int n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT;
 
 	return (parent_rate / n2) * 2;
@@ -382,7 +359,7 @@ static unsigned long clk_pxa27x_system_bus_get_rate(struct clk_hw *hw,
 {
 	unsigned long clkcfg;
 	unsigned int b, osc_forced;
-	unsigned long ccsr = readl(CCSR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
@@ -399,7 +376,7 @@ static unsigned long clk_pxa27x_system_bus_get_rate(struct clk_hw *hw,
 static u8 clk_pxa27x_system_bus_get_parent(struct clk_hw *hw)
 {
 	unsigned int osc_forced;
-	unsigned long ccsr = readl(CCSR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	if (osc_forced)
@@ -415,8 +392,8 @@ static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw,
 						unsigned long parent_rate)
 {
 	unsigned int a, l, osc_forced;
-	unsigned long cccr = readl(CCCR);
-	unsigned long ccsr = readl(CCSR);
+	unsigned long cccr = readl(clk_regs + CCCR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	a = cccr & (1 << CCCR_A_BIT);
@@ -434,8 +411,8 @@ static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw,
 static u8 clk_pxa27x_memory_get_parent(struct clk_hw *hw)
 {
 	unsigned int osc_forced, a;
-	unsigned long cccr = readl(CCCR);
-	unsigned long ccsr = readl(CCSR);
+	unsigned long cccr = readl(clk_regs + CCCR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	a = cccr & (1 << CCCR_A_BIT);
@@ -490,16 +467,17 @@ static void __init pxa27x_base_clocks_init(void)
 	clk_register_clk_pxa27x_lcd_base();
 }
 
-int __init pxa27x_clocks_init(void)
+int __init pxa27x_clocks_init(void __iomem *regs)
 {
+	clk_regs = regs;
 	pxa27x_base_clocks_init();
 	pxa27x_dummy_clocks_init();
-	return clk_pxa_cken_init(pxa27x_clocks, ARRAY_SIZE(pxa27x_clocks));
+	return clk_pxa_cken_init(pxa27x_clocks, ARRAY_SIZE(pxa27x_clocks), regs);
 }
 
 static void __init pxa27x_dt_clocks_init(struct device_node *np)
 {
-	pxa27x_clocks_init();
+	pxa27x_clocks_init(ioremap(0x41300000ul, 0x10));
 	clk_pxa_dt_common_init(np);
 }
 CLK_OF_DECLARE(pxa_clks, "marvell,pxa270-clocks", pxa27x_dt_clocks_init);
diff --git a/drivers/clk/pxa/clk-pxa2xx.h b/drivers/clk/pxa/clk-pxa2xx.h
new file mode 100644
index 000000000000..94b03d0e32ff
--- /dev/null
+++ b/drivers/clk/pxa/clk-pxa2xx.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __CLK_PXA2XX_H
+#define __CLK_PXA2XX_H
+
+#define CCCR		(0x0000)  /* Core Clock Configuration Register */
+#define CCSR		(0x000C)  /* Core Clock Status Register */
+#define CKEN		(0x0004)  /* Clock Enable Register */
+#define OSCC		(0x0008)  /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CCCR_CPDIS_BIT	(31)
+#define CCCR_PPDIS_BIT	(30)
+#define CCCR_LCD_26_BIT	(27)
+#define CCCR_A_BIT	(25)
+
+#define CCSR_N2_MASK	CCCR_N_MASK
+#define CCSR_M_MASK	CCCR_M_MASK
+#define CCSR_L_MASK	CCCR_L_MASK
+#define CCSR_N2_SHIFT	7
+
+#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
+#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
+#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
+#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
+#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
+#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
+#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
+#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
+#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
+#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
+#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
+#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
+#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
+#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
+#define CKEN_USB	(11)	/* USB Unit Clock Enable */
+#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
+#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
+#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
+#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
+#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
+#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
+#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
+#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
+#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
+#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
+#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
+#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
+
+#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
+
+#endif
diff --git a/drivers/clk/pxa/clk-pxa3xx.c b/drivers/clk/pxa/clk-pxa3xx.c
index 60db92772e72..42958a542662 100644
--- a/drivers/clk/pxa/clk-pxa3xx.c
+++ b/drivers/clk/pxa/clk-pxa3xx.c
@@ -14,8 +14,9 @@
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/of.h>
-#include <mach/smemc.h>
-#include <mach/pxa3xx-regs.h>
+#include <linux/soc/pxa/cpu.h>
+#include <linux/soc/pxa/smemc.h>
+#include <linux/clk/pxa.h>
 
 #include <dt-bindings/clock/pxa-clock.h>
 #include "clk-pxa.h"
@@ -23,6 +24,84 @@
 #define KHz 1000
 #define MHz (1000 * 1000)
 
+#define ACCR			(0x0000)	/* Application Subsystem Clock Configuration Register */
+#define ACSR			(0x0004)	/* Application Subsystem Clock Status Register */
+#define AICSR			(0x0008)	/* Application Subsystem Interrupt Control/Status Register */
+#define CKENA			(0x000C)	/* A Clock Enable Register */
+#define CKENB			(0x0010)	/* B Clock Enable Register */
+#define CKENC			(0x0024)	/* C Clock Enable Register */
+#define AC97_DIV		(0x0014)	/* AC97 clock divisor value register */
+
+#define ACCR_XPDIS		(1 << 31)	/* Core PLL Output Disable */
+#define ACCR_SPDIS		(1 << 30)	/* System PLL Output Disable */
+#define ACCR_D0CS		(1 << 26)	/* D0 Mode Clock Select */
+#define ACCR_PCCE		(1 << 11)	/* Power Mode Change Clock Enable */
+#define ACCR_DDR_D0CS		(1 << 7)	/* DDR SDRAM clock frequency in D0CS (PXA31x only) */
+
+#define ACCR_SMCFS_MASK		(0x7 << 23)	/* Static Memory Controller Frequency Select */
+#define ACCR_SFLFS_MASK		(0x3 << 18)	/* Frequency Select for Internal Memory Controller */
+#define ACCR_XSPCLK_MASK	(0x3 << 16)	/* Core Frequency during Frequency Change */
+#define ACCR_HSS_MASK		(0x3 << 14)	/* System Bus-Clock Frequency Select */
+#define ACCR_DMCFS_MASK		(0x3 << 12)	/* Dynamic Memory Controller Clock Frequency Select */
+#define ACCR_XN_MASK		(0x7 << 8)	/* Core PLL Turbo-Mode-to-Run-Mode Ratio */
+#define ACCR_XL_MASK		(0x1f)		/* Core PLL Run-Mode-to-Oscillator Ratio */
+
+#define ACCR_SMCFS(x)		(((x) & 0x7) << 23)
+#define ACCR_SFLFS(x)		(((x) & 0x3) << 18)
+#define ACCR_XSPCLK(x)		(((x) & 0x3) << 16)
+#define ACCR_HSS(x)		(((x) & 0x3) << 14)
+#define ACCR_DMCFS(x)		(((x) & 0x3) << 12)
+#define ACCR_XN(x)		(((x) & 0x7) << 8)
+#define ACCR_XL(x)		((x) & 0x1f)
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD	1	/* < LCD Clock Enable */
+#define CKEN_USBH	2	/* < USB host clock enable */
+#define CKEN_CAMERA	3	/* < Camera interface clock enable */
+#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
+#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
+#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT	11	/* < Boot rom clock enable */
+#define CKEN_MMC1	12	/* < MMC1 Clock enable */
+#define CKEN_MMC2	13	/* < MMC2 clock enable */
+#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
+#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
+#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
+#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
+#define CKEN_TPM	19	/* < TPM clock enable */
+#define CKEN_UDC	20	/* < UDC clock enable */
+#define CKEN_BTUART	21	/* < BTUART clock enable */
+#define CKEN_FFUART	22	/* < FFUART clock enable */
+#define CKEN_STUART	23	/* < STUART clock enable */
+#define CKEN_AC97	24	/* < AC97 clock enable */
+#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1	26	/* < SSP1 clock enable */
+#define CKEN_SSP2	27	/* < SSP2 clock enable */
+#define CKEN_SSP3	28	/* < SSP3 clock enable */
+#define CKEN_SSP4	29	/* < SSP4 clock enable */
+#define CKEN_MSL0	30	/* < MSL0 clock enable */
+#define CKEN_PWM0	32	/* < PWM[0] clock enable */
+#define CKEN_PWM1	33	/* < PWM[1] clock enable */
+#define CKEN_I2C	36	/* < I2C clock enable */
+#define CKEN_INTC	38	/* < Interrupt controller clock enable */
+#define CKEN_GPIO	39	/* < GPIO clock enable */
+#define CKEN_1WIRE	40	/* < 1-wire clock enable */
+#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
+#define CKEN_MINI_IM	48	/* < Mini-IM */
+#define CKEN_MINI_LCD	49	/* < Mini LCD */
+
+#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
+#define CKEN_MVED	43	/* < MVED clock enable */
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define CKEN_PXA300_GCU		42	/* Graphics controller clock enable */
+#define CKEN_PXA320_GCU		7	/* Graphics controller clock enable */
+
+
 enum {
 	PXA_CORE_60Mhz = 0,
 	PXA_CORE_RUN,
@@ -39,12 +118,12 @@ static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
 
 /* crystal frequency to static memory controller multiplier (SMCFS) */
 static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
-static unsigned int df_clkdiv[4] = { 1, 2, 4, 1 };
-
 static const char * const get_freq_khz[] = {
 	"core", "ring_osc_60mhz", "run", "cpll", "system_bus"
 };
 
+static void __iomem *clk_regs;
+
 /*
  * Get the clock frequency as reflected by ACSR and the turbo flag.
  * We assume these values have been applied via a fcs.
@@ -78,12 +157,27 @@ unsigned int pxa3xx_get_clk_frequency_khz(int info)
 	return (unsigned int)clks[0] / KHz;
 }
 
+void pxa3xx_clk_update_accr(u32 disable, u32 enable, u32 xclkcfg, u32 mask)
+{
+	u32 accr = readl(clk_regs + ACCR);
+
+	accr &= ~disable;
+	accr |= enable;
+
+	writel(accr, ACCR);
+	if (xclkcfg)
+		__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
+
+	while ((readl(clk_regs + ACSR) & mask) != (accr & mask))
+		cpu_relax();
+}
+
 static unsigned long clk_pxa3xx_ac97_get_rate(struct clk_hw *hw,
 					     unsigned long parent_rate)
 {
 	unsigned long ac97_div, rate;
 
-	ac97_div = AC97_DIV;
+	ac97_div = readl(clk_regs + AC97_DIV);
 
 	/* This may loose precision for some rates but won't for the
 	 * standard 24.576MHz.
@@ -100,18 +194,18 @@ RATE_RO_OPS(clk_pxa3xx_ac97, "ac97");
 static unsigned long clk_pxa3xx_smemc_get_rate(struct clk_hw *hw,
 					      unsigned long parent_rate)
 {
-	unsigned long acsr = ACSR;
-	unsigned long memclkcfg = __raw_readl(MEMCLKCFG);
+	unsigned long acsr = readl(clk_regs + ACSR);
 
 	return (parent_rate / 48)  * smcfs_mult[(acsr >> 23) & 0x7] /
-		df_clkdiv[(memclkcfg >> 16) & 0x3];
+		pxa3xx_smemc_get_memclkdiv();
+
 }
 PARENTS(clk_pxa3xx_smemc) = { "spll_624mhz" };
 RATE_RO_OPS(clk_pxa3xx_smemc, "smemc");
 
 static bool pxa3xx_is_ring_osc_forced(void)
 {
-	unsigned long acsr = ACSR;
+	unsigned long acsr = readl(clk_regs + ACSR);
 
 	return acsr & ACCR_D0CS;
 }
@@ -123,7 +217,7 @@ PARENTS(pxa3xx_ac97_bus) = { "ring_osc_60mhz", "ac97" };
 PARENTS(pxa3xx_sbus) = { "ring_osc_60mhz", "system_bus" };
 PARENTS(pxa3xx_smemcbus) = { "ring_osc_60mhz", "smemc" };
 
-#define CKEN_AB(bit) ((CKEN_ ## bit > 31) ? &CKENB : &CKENA)
+#define CKEN_AB(bit) ((CKEN_ ## bit > 31) ? CKENB : CKENA)
 #define PXA3XX_CKEN(dev_id, con_id, parents, mult_lp, div_lp, mult_hp,	\
 		    div_hp, bit, is_lp, flags)				\
 	PXA_CKEN(dev_id, con_id, bit, parents, mult_lp, div_lp,		\
@@ -191,7 +285,7 @@ static struct desc_clk_cken pxa93x_clocks[] __initdata = {
 static unsigned long clk_pxa3xx_system_bus_get_rate(struct clk_hw *hw,
 					    unsigned long parent_rate)
 {
-	unsigned long acsr = ACSR;
+	unsigned long acsr = readl(clk_regs + ACSR);
 	unsigned int hss = (acsr >> 14) & 0x3;
 
 	if (pxa3xx_is_ring_osc_forced())
@@ -238,7 +332,7 @@ MUX_RO_RATE_RO_OPS(clk_pxa3xx_core, "core");
 static unsigned long clk_pxa3xx_run_get_rate(struct clk_hw *hw,
 					     unsigned long parent_rate)
 {
-	unsigned long acsr = ACSR;
+	unsigned long acsr = readl(clk_regs + ACSR);
 	unsigned int xn = (acsr & ACCR_XN_MASK) >> 8;
 	unsigned int t, xclkcfg;
 
@@ -254,7 +348,7 @@ RATE_RO_OPS(clk_pxa3xx_run, "run");
 static unsigned long clk_pxa3xx_cpll_get_rate(struct clk_hw *hw,
 	unsigned long parent_rate)
 {
-	unsigned long acsr = ACSR;
+	unsigned long acsr = readl(clk_regs + ACSR);
 	unsigned int xn = (acsr & ACCR_XN_MASK) >> 8;
 	unsigned int xl = acsr & ACCR_XL_MASK;
 	unsigned int t, xclkcfg;
@@ -325,7 +419,7 @@ static void __init pxa3xx_dummy_clocks_init(void)
 	}
 }
 
-static void __init pxa3xx_base_clocks_init(void)
+static void __init pxa3xx_base_clocks_init(void __iomem *oscc_reg)
 {
 	struct clk *clk;
 
@@ -335,34 +429,35 @@ static void __init pxa3xx_base_clocks_init(void)
 	clk_register_clk_pxa3xx_ac97();
 	clk_register_clk_pxa3xx_smemc();
 	clk = clk_register_gate(NULL, "CLK_POUT",
-				"osc_13mhz", 0, OSCC, 11, 0, NULL);
+				"osc_13mhz", 0, oscc_reg, 11, 0, NULL);
 	clk_register_clkdev(clk, "CLK_POUT", NULL);
 	clkdev_pxa_register(CLK_OSTIMER, "OSTIMER0", NULL,
 			    clk_register_fixed_factor(NULL, "os-timer0",
 						      "osc_13mhz", 0, 1, 4));
 }
 
-int __init pxa3xx_clocks_init(void)
+int __init pxa3xx_clocks_init(void __iomem *regs, void __iomem *oscc_reg)
 {
 	int ret;
 
-	pxa3xx_base_clocks_init();
+	clk_regs = regs;
+	pxa3xx_base_clocks_init(oscc_reg);
 	pxa3xx_dummy_clocks_init();
-	ret = clk_pxa_cken_init(pxa3xx_clocks, ARRAY_SIZE(pxa3xx_clocks));
+	ret = clk_pxa_cken_init(pxa3xx_clocks, ARRAY_SIZE(pxa3xx_clocks), regs);
 	if (ret)
 		return ret;
 	if (cpu_is_pxa320())
 		return clk_pxa_cken_init(pxa320_clocks,
-					 ARRAY_SIZE(pxa320_clocks));
+					 ARRAY_SIZE(pxa320_clocks), regs);
 	if (cpu_is_pxa300() || cpu_is_pxa310())
 		return clk_pxa_cken_init(pxa300_310_clocks,
-					 ARRAY_SIZE(pxa300_310_clocks));
-	return clk_pxa_cken_init(pxa93x_clocks, ARRAY_SIZE(pxa93x_clocks));
+					 ARRAY_SIZE(pxa300_310_clocks), regs);
+	return clk_pxa_cken_init(pxa93x_clocks, ARRAY_SIZE(pxa93x_clocks), regs);
 }
 
 static void __init pxa3xx_dt_clocks_init(struct device_node *np)
 {
-	pxa3xx_clocks_init();
+	pxa3xx_clocks_init(ioremap(0x41340000, 0x10), ioremap(0x41350000, 4));
 	clk_pxa_dt_common_init(np);
 }
 CLK_OF_DECLARE(pxa_clks, "marvell,pxa300-clocks", pxa3xx_dt_clocks_init);
diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c
index f0b6f52eb2c3..ed1ae061a687 100644
--- a/drivers/cpufreq/pxa2xx-cpufreq.c
+++ b/drivers/cpufreq/pxa2xx-cpufreq.c
@@ -24,11 +24,9 @@
 #include <linux/cpufreq.h>
 #include <linux/err.h>
 #include <linux/regulator/consumer.h>
+#include <linux/soc/pxa/cpu.h>
 #include <linux/io.h>
 
-#include <mach/pxa2xx-regs.h>
-#include <mach/smemc.h>
-
 #ifdef DEBUG
 static unsigned int freq_debug;
 module_param(freq_debug, uint, 0);
@@ -106,8 +104,6 @@ static struct pxa_freqs pxa27x_freqs[] = {
 static struct cpufreq_frequency_table
 	pxa27x_freq_table[NUM_PXA27x_FREQS+1];
 
-extern unsigned get_clk_frequency_khz(int info);
-
 #ifdef CONFIG_REGULATOR
 
 static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)
diff --git a/drivers/cpufreq/pxa3xx-cpufreq.c b/drivers/cpufreq/pxa3xx-cpufreq.c
index 32f993c94675..4afa48d172db 100644
--- a/drivers/cpufreq/pxa3xx-cpufreq.c
+++ b/drivers/cpufreq/pxa3xx-cpufreq.c
@@ -8,12 +8,11 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
+#include <linux/soc/pxa/cpu.h>
+#include <linux/clk/pxa.h>
 #include <linux/slab.h>
 #include <linux/io.h>
 
-#include <mach/generic.h>
-#include <mach/pxa3xx-regs.h>
-
 #define HSS_104M	(0)
 #define HSS_156M	(1)
 #define HSS_208M	(2)
@@ -34,6 +33,28 @@
 #define DMCFS_26M	(0)
 #define DMCFS_260M	(3)
 
+#define ACCR_XPDIS		(1 << 31)	/* Core PLL Output Disable */
+#define ACCR_SPDIS		(1 << 30)	/* System PLL Output Disable */
+#define ACCR_D0CS		(1 << 26)	/* D0 Mode Clock Select */
+#define ACCR_PCCE		(1 << 11)	/* Power Mode Change Clock Enable */
+#define ACCR_DDR_D0CS		(1 << 7)	/* DDR SDRAM clock frequency in D0CS (PXA31x only) */
+
+#define ACCR_SMCFS_MASK		(0x7 << 23)	/* Static Memory Controller Frequency Select */
+#define ACCR_SFLFS_MASK		(0x3 << 18)	/* Frequency Select for Internal Memory Controller */
+#define ACCR_XSPCLK_MASK	(0x3 << 16)	/* Core Frequency during Frequency Change */
+#define ACCR_HSS_MASK		(0x3 << 14)	/* System Bus-Clock Frequency Select */
+#define ACCR_DMCFS_MASK		(0x3 << 12)	/* Dynamic Memory Controller Clock Frequency Select */
+#define ACCR_XN_MASK		(0x7 << 8)	/* Core PLL Turbo-Mode-to-Run-Mode Ratio */
+#define ACCR_XL_MASK		(0x1f)		/* Core PLL Run-Mode-to-Oscillator Ratio */
+
+#define ACCR_SMCFS(x)		(((x) & 0x7) << 23)
+#define ACCR_SFLFS(x)		(((x) & 0x3) << 18)
+#define ACCR_XSPCLK(x)		(((x) & 0x3) << 16)
+#define ACCR_HSS(x)		(((x) & 0x3) << 14)
+#define ACCR_DMCFS(x)		(((x) & 0x3) << 12)
+#define ACCR_XN(x)		(((x) & 0x7) << 8)
+#define ACCR_XL(x)		((x) & 0x1f)
+
 struct pxa3xx_freq_info {
 	unsigned int cpufreq_mhz;
 	unsigned int core_xl : 5;
@@ -111,41 +132,29 @@ static int setup_freqs_table(struct cpufreq_policy *policy,
 
 static void __update_core_freq(struct pxa3xx_freq_info *info)
 {
-	uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK;
-	uint32_t accr = ACCR;
-	uint32_t xclkcfg;
-
-	accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK);
-	accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl);
+	u32 mask, disable, enable, xclkcfg;
 
+	mask	= ACCR_XN_MASK | ACCR_XL_MASK;
+	disable = mask | ACCR_XSPCLK_MASK;
+	enable  = ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl);
 	/* No clock until core PLL is re-locked */
-	accr |= ACCR_XSPCLK(XSPCLK_NONE);
-
+	enable |= ACCR_XSPCLK(XSPCLK_NONE);
 	xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2;	/* turbo bit */
 
-	ACCR = accr;
-	__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
-
-	while ((ACSR & mask) != (accr & mask))
-		cpu_relax();
+	pxa3xx_clk_update_accr(disable, enable, xclkcfg, mask);
 }
 
 static void __update_bus_freq(struct pxa3xx_freq_info *info)
 {
-	uint32_t mask;
-	uint32_t accr = ACCR;
-
-	mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK |
-		ACCR_DMCFS_MASK;
-
-	accr &= ~mask;
-	accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) |
-		ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs);
+	u32 mask, disable, enable;
 
-	ACCR = accr;
+	mask	= ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK |
+		  ACCR_DMCFS_MASK;
+	disable = mask;
+	enable	= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) |
+		  ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs);
 
-	while ((ACSR & mask) != (accr & mask))
-		cpu_relax();
+	pxa3xx_clk_update_accr(disable, enable, 0, mask);
 }
 
 static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c
index 3332b77eef2a..f04ba12dbfa8 100644
--- a/drivers/input/mouse/pxa930_trkball.c
+++ b/drivers/input/mouse/pxa930_trkball.c
@@ -15,7 +15,6 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 
-#include <mach/hardware.h>
 #include <linux/platform_data/mouse-pxa930_trkball.h>
 
 /* Trackball Controller Register Definitions */
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 43c7d6e5bdc0..2d70c945b20a 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -902,6 +902,7 @@ config TOUCHSCREEN_WM9713
 config TOUCHSCREEN_WM97XX_MAINSTONE
 	tristate "WM97xx Mainstone/Palm accelerated touch"
 	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
+	depends on SND_PXA2XX_LIB_AC97
 	help
 	  Say Y here for support for streaming mode with WM97xx touchscreens
 	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
@@ -914,6 +915,7 @@ config TOUCHSCREEN_WM97XX_MAINSTONE
 config TOUCHSCREEN_WM97XX_ZYLONITE
 	tristate "Zylonite accelerated touch"
 	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
+	depends on SND_PXA2XX_LIB_AC97
 	select TOUCHSCREEN_WM9713
 	help
 	  Say Y here for support for streaming mode with the touchscreen
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index f8564b398eb3..c39f49720fe4 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -21,13 +21,14 @@
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/wm97xx.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/soc/pxa/cpu.h>
+#include <linux/wm97xx.h>
 
-#include <mach/regs-ac97.h>
+#include <sound/pxa2xx-lib.h>
 
 #include <asm/mach-types.h>
 
@@ -41,24 +42,23 @@ struct continuous {
 #define WM_READS(sp) ((sp / HZ) + 1)
 
 static const struct continuous cinfo[] = {
-	{WM9705_ID2, 0, WM_READS(94), 94},
-	{WM9705_ID2, 1, WM_READS(188), 188},
-	{WM9705_ID2, 2, WM_READS(375), 375},
-	{WM9705_ID2, 3, WM_READS(750), 750},
-	{WM9712_ID2, 0, WM_READS(94), 94},
-	{WM9712_ID2, 1, WM_READS(188), 188},
-	{WM9712_ID2, 2, WM_READS(375), 375},
-	{WM9712_ID2, 3, WM_READS(750), 750},
-	{WM9713_ID2, 0, WM_READS(94), 94},
-	{WM9713_ID2, 1, WM_READS(120), 120},
-	{WM9713_ID2, 2, WM_READS(154), 154},
-	{WM9713_ID2, 3, WM_READS(188), 188},
+	{ WM9705_ID2, 0, WM_READS(94),  94  },
+	{ WM9705_ID2, 1, WM_READS(188), 188 },
+	{ WM9705_ID2, 2, WM_READS(375), 375 },
+	{ WM9705_ID2, 3, WM_READS(750), 750 },
+	{ WM9712_ID2, 0, WM_READS(94),  94  },
+	{ WM9712_ID2, 1, WM_READS(188), 188 },
+	{ WM9712_ID2, 2, WM_READS(375), 375 },
+	{ WM9712_ID2, 3, WM_READS(750), 750 },
+	{ WM9713_ID2, 0, WM_READS(94),  94  },
+	{ WM9713_ID2, 1, WM_READS(120), 120 },
+	{ WM9713_ID2, 2, WM_READS(154), 154 },
+	{ WM9713_ID2, 3, WM_READS(188), 188 },
 };
 
 /* continuous speed index */
 static int sp_idx;
-static u16 last, tries;
-static int irq;
+static struct gpio_desc *gpiod_irq;
 
 /*
  * Pen sampling frequency (Hz) in continuous mode.
@@ -97,44 +97,40 @@ MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
 
 
 /* flush AC97 slot 5 FIFO on pxa machines */
-#ifdef CONFIG_PXA27x
-static void wm97xx_acc_pen_up(struct wm97xx *wm)
-{
-	schedule_timeout_uninterruptible(1);
-
-	while (MISR & (1 << 2))
-		MODR;
-}
-#else
 static void wm97xx_acc_pen_up(struct wm97xx *wm)
 {
 	unsigned int count;
 
-	schedule_timeout_uninterruptible(1);
+	msleep(1);
 
-	for (count = 0; count < 16; count++)
-		MODR;
+	if (cpu_is_pxa27x()) {
+		while (pxa2xx_ac97_read_misr() & (1 << 2))
+			pxa2xx_ac97_read_modr();
+	} else if (cpu_is_pxa3xx()) {
+		for (count = 0; count < 16; count++)
+			pxa2xx_ac97_read_modr();
+	}
 }
-#endif
 
 static int wm97xx_acc_pen_down(struct wm97xx *wm)
 {
 	u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
 	int reads = 0;
+	static u16 last, tries;
 
 	/* When the AC97 queue has been drained we need to allow time
 	 * to buffer up samples otherwise we end up spinning polling
 	 * for samples.  The controller can't have a suitably low
 	 * threshold set to use the notifications it gives.
 	 */
-	schedule_timeout_uninterruptible(1);
+	msleep(1);
 
 	if (tries > 5) {
 		tries = 0;
 		return RC_PENUP;
 	}
 
-	x = MODR;
+	x = pxa2xx_ac97_read_modr();
 	if (x == last) {
 		tries++;
 		return RC_AGAIN;
@@ -142,10 +138,10 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
 	last = x;
 	do {
 		if (reads)
-			x = MODR;
-		y = MODR;
+			x = pxa2xx_ac97_read_modr();
+		y = pxa2xx_ac97_read_modr();
 		if (pressure)
-			p = MODR;
+			p = pxa2xx_ac97_read_modr();
 
 		dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n",
 			x, y, p);
@@ -194,28 +190,23 @@ static int wm97xx_acc_startup(struct wm97xx *wm)
 	/* IRQ driven touchscreen is used on Palm hardware */
 	if (machine_is_palmt5() || machine_is_palmtx() || machine_is_palmld()) {
 		pen_int = 1;
-		irq = 27;
 		/* There is some obscure mutant of WM9712 interbred with WM9713
 		 * used on Palm HW */
 		wm->variant = WM97xx_WM1613;
-	} else if (machine_is_mainstone() && pen_int)
-		irq = 4;
-
-	if (irq) {
-		ret = gpio_request(irq, "Touchscreen IRQ");
-		if (ret)
-			goto out;
-
-		ret = gpio_direction_input(irq);
-		if (ret) {
-			gpio_free(irq);
-			goto out;
-		}
+	} else if (machine_is_zylonite()) {
+		pen_int = 1;
+	}
 
-		wm->pen_irq = gpio_to_irq(irq);
+	if (pen_int) {
+		gpiod_irq = gpiod_get(wm->dev, "touch", GPIOD_IN);
+		if (IS_ERR(gpiod_irq))
+			pen_int = 0;
+	}
+
+	if (pen_int) {
+		wm->pen_irq = gpiod_to_irq(gpiod_irq);
 		irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
-	} else /* pen irq not supported */
-		pen_int = 0;
+	}
 
 	/* codec specific irq config */
 	if (pen_int) {
@@ -242,7 +233,6 @@ static int wm97xx_acc_startup(struct wm97xx *wm)
 		}
 	}
 
-out:
 	return ret;
 }
 
@@ -250,28 +240,19 @@ static void wm97xx_acc_shutdown(struct wm97xx *wm)
 {
 	/* codec specific deconfig */
 	if (pen_int) {
-		if (irq)
-			gpio_free(irq);
+		if (gpiod_irq)
+			gpiod_put(gpiod_irq);
 		wm->pen_irq = 0;
 	}
 }
 
-static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
-{
-	if (enable)
-		enable_irq(wm->pen_irq);
-	else
-		disable_irq_nosync(wm->pen_irq);
-}
-
 static struct wm97xx_mach_ops mainstone_mach_ops = {
-	.acc_enabled = 1,
-	.acc_pen_up = wm97xx_acc_pen_up,
-	.acc_pen_down = wm97xx_acc_pen_down,
-	.acc_startup = wm97xx_acc_startup,
-	.acc_shutdown = wm97xx_acc_shutdown,
-	.irq_enable = wm97xx_irq_enable,
-	.irq_gpio = WM97XX_GPIO_2,
+	.acc_enabled	= 1,
+	.acc_pen_up	= wm97xx_acc_pen_up,
+	.acc_pen_down	= wm97xx_acc_pen_down,
+	.acc_startup	= wm97xx_acc_startup,
+	.acc_shutdown	= wm97xx_acc_shutdown,
+	.irq_gpio	= WM97XX_GPIO_2,
 };
 
 static int mainstone_wm97xx_probe(struct platform_device *pdev)
@@ -286,14 +267,15 @@ static int mainstone_wm97xx_remove(struct platform_device *pdev)
 	struct wm97xx *wm = platform_get_drvdata(pdev);
 
 	wm97xx_unregister_mach_ops(wm);
+
 	return 0;
 }
 
 static struct platform_driver mainstone_wm97xx_driver = {
-	.probe = mainstone_wm97xx_probe,
-	.remove = mainstone_wm97xx_remove,
-	.driver = {
-		.name = "wm97xx-touch",
+	.probe	= mainstone_wm97xx_probe,
+	.remove	= mainstone_wm97xx_remove,
+	.driver	= {
+		.name	= "wm97xx-touch",
 	},
 };
 module_platform_driver(mainstone_wm97xx_driver);
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 1b58611c8084..2757c7768ffe 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -285,11 +285,12 @@ void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode)
 EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode);
 
 /*
- * Handle a pen down interrupt.
+ * Codec PENDOWN irq handler
+ *
  */
-static void wm97xx_pen_irq_worker(struct work_struct *work)
+static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
 {
-	struct wm97xx *wm = container_of(work, struct wm97xx, pen_event_work);
+	struct wm97xx *wm = dev_id;
 	int pen_was_down = wm->pen_is_down;
 
 	/* do we need to enable the touch panel reader */
@@ -343,27 +344,6 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
 	if (!wm->pen_is_down && wm->mach_ops->acc_enabled)
 		wm->mach_ops->acc_pen_up(wm);
 
-	wm->mach_ops->irq_enable(wm, 1);
-}
-
-/*
- * Codec PENDOWN irq handler
- *
- * We have to disable the codec interrupt in the handler because it
- * can take up to 1ms to clear the interrupt source. We schedule a task
- * in a work queue to do the actual interaction with the chip.  The
- * interrupt is then enabled again in the slow handler when the source
- * has been cleared.
- */
-static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
-{
-	struct wm97xx *wm = dev_id;
-
-	if (!work_pending(&wm->pen_event_work)) {
-		wm->mach_ops->irq_enable(wm, 0);
-		queue_work(wm->ts_workq, &wm->pen_event_work);
-	}
-
 	return IRQ_HANDLED;
 }
 
@@ -374,12 +354,9 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm)
 {
 	u16 reg;
 
-	/* If an interrupt is supplied an IRQ enable operation must also be
-	 * provided. */
-	BUG_ON(!wm->mach_ops->irq_enable);
-
-	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
-			"wm97xx-pen", wm)) {
+	if (request_threaded_irq(wm->pen_irq, NULL, wm97xx_pen_interrupt,
+				 IRQF_SHARED | IRQF_ONESHOT,
+				 "wm97xx-pen", wm)) {
 		dev_err(wm->dev,
 			"Failed to register pen down interrupt, polling");
 		wm->pen_irq = 0;
@@ -509,7 +486,6 @@ static int wm97xx_ts_input_open(struct input_dev *idev)
 	wm->codec->dig_enable(wm, 1);
 
 	INIT_DELAYED_WORK(&wm->ts_reader, wm97xx_ts_reader);
-	INIT_WORK(&wm->pen_event_work, wm97xx_pen_irq_worker);
 
 	wm->ts_reader_min_interval = HZ >= 100 ? HZ / 100 : 1;
 	if (wm->ts_reader_min_interval < 1)
@@ -560,10 +536,6 @@ static void wm97xx_ts_input_close(struct input_dev *idev)
 
 	wm->pen_is_down = 0;
 
-	/* Balance out interrupt disables/enables */
-	if (cancel_work_sync(&wm->pen_event_work))
-		wm->mach_ops->irq_enable(wm, 1);
-
 	/* ts_reader rearms itself so we need to explicitly stop it
 	 * before we destroy the workqueue.
 	 */
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index 0f4ac7f844ce..a70fe4abe520 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -17,15 +17,14 @@
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/soc/pxa/cpu.h>
 #include <linux/wm97xx.h>
 
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/regs-ac97.h>
+#include <sound/pxa2xx-lib.h>
 
 struct continuous {
 	u16 id;    /* codec id */
@@ -80,7 +79,7 @@ static void wm97xx_acc_pen_up(struct wm97xx *wm)
 	msleep(1);
 
 	for (i = 0; i < 16; i++)
-		MODR;
+		pxa2xx_ac97_read_modr();
 }
 
 static int wm97xx_acc_pen_down(struct wm97xx *wm)
@@ -101,7 +100,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
 		return RC_PENUP;
 	}
 
-	x = MODR;
+	x = pxa2xx_ac97_read_modr();
 	if (x == last) {
 		tries++;
 		return RC_AGAIN;
@@ -109,10 +108,10 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
 	last = x;
 	do {
 		if (reads)
-			x = MODR;
-		y = MODR;
+			x = pxa2xx_ac97_read_modr();
+		y = pxa2xx_ac97_read_modr();
 		if (pressure)
-			p = MODR;
+			p = pxa2xx_ac97_read_modr();
 
 		dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n",
 			x, y, p);
@@ -161,34 +160,28 @@ static int wm97xx_acc_startup(struct wm97xx *wm)
 	return 0;
 }
 
-static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
-{
-	if (enable)
-		enable_irq(wm->pen_irq);
-	else
-		disable_irq_nosync(wm->pen_irq);
-}
-
 static struct wm97xx_mach_ops zylonite_mach_ops = {
 	.acc_enabled	= 1,
 	.acc_pen_up	= wm97xx_acc_pen_up,
 	.acc_pen_down	= wm97xx_acc_pen_down,
 	.acc_startup	= wm97xx_acc_startup,
-	.irq_enable	= wm97xx_irq_enable,
 	.irq_gpio	= WM97XX_GPIO_2,
 };
 
 static int zylonite_wm97xx_probe(struct platform_device *pdev)
 {
 	struct wm97xx *wm = platform_get_drvdata(pdev);
-	int gpio_touch_irq;
-
-	if (cpu_is_pxa320())
-		gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO15);
-	else
-		gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+	struct gpio_desc *gpio_touch_irq;
+	int err;
+
+	gpio_touch_irq = devm_gpiod_get(&pdev->dev, "touch", GPIOD_IN);
+	err = PTR_ERR_OR_ZERO(gpio_touch_irq);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot get irq gpio: %d\n", err);
+		return err;
+	}
 
-	wm->pen_irq = gpio_to_irq(gpio_touch_irq);
+	wm->pen_irq = gpiod_to_irq(gpio_touch_irq);
 	irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
 
 	wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 42dc46e3f00f..9aa3fccd71fb 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -11,7 +11,6 @@
 #include <linux/device.h>
 #include <linux/leds.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/locomo.h>
 
 static void locomoled_brightness_set(struct led_classdev *led_cdev,
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 3d5b14c60e20..0be5731685b4 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -22,6 +22,8 @@
 #include <linux/mfd/tmio.h>
 #include <linux/mfd/tc6393xb.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 
 #define SCR_REVID	0x08		/* b Revision ID	*/
@@ -87,8 +89,10 @@
 
 struct tc6393xb {
 	void __iomem		*scr;
+	struct device		*dev;
 
 	struct gpio_chip	gpio;
+	struct gpio_desc	*vcc_on;
 
 	struct clk		*clk; /* 3,6 Mhz */
 
@@ -497,17 +501,93 @@ static int tc6393xb_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
-static int tc6393xb_register_gpio(struct tc6393xb *tc6393xb, int gpio_base)
+/*
+ * TC6393XB GPIOs as used on TOSA, are the only user of this chip.
+ * GPIOs 2, 5, 8 and 13 are not connected.
+ */
+#define TOSA_GPIO_TG_ON			0
+#define TOSA_GPIO_L_MUTE		1
+#define TOSA_GPIO_BL_C20MA		3
+#define TOSA_GPIO_CARD_VCC_ON		4
+#define TOSA_GPIO_CHARGE_OFF		6
+#define TOSA_GPIO_CHARGE_OFF_JC		7
+#define TOSA_GPIO_BAT0_V_ON		9
+#define TOSA_GPIO_BAT1_V_ON		10
+#define TOSA_GPIO_BU_CHRG_ON		11
+#define TOSA_GPIO_BAT_SW_ON		12
+#define TOSA_GPIO_BAT0_TH_ON		14
+#define TOSA_GPIO_BAT1_TH_ON		15
+
+
+GPIO_LOOKUP_SINGLE(tosa_lcd_gpio_lookup, "spi2.0", "tc6393xb",
+		   TOSA_GPIO_TG_ON, "tg #pwr", GPIO_ACTIVE_HIGH);
+
+GPIO_LOOKUP_SINGLE(tosa_lcd_bl_gpio_lookup, "i2c-tos-bl", "tc6393xb",
+		   TOSA_GPIO_BL_C20MA, "backlight", GPIO_ACTIVE_HIGH);
+
+GPIO_LOOKUP_SINGLE(tosa_audio_gpio_lookup, "tosa-audio", "tc6393xb",
+		   TOSA_GPIO_L_MUTE, NULL, GPIO_ACTIVE_HIGH);
+
+static struct gpiod_lookup_table tosa_battery_gpio_lookup = {
+	.dev_id = "wm97xx-battery",
+	.table = {
+		GPIO_LOOKUP("tc6393xb", TOSA_GPIO_CHARGE_OFF,
+			    "main charge off", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("tc6393xb", TOSA_GPIO_CHARGE_OFF_JC,
+			    "jacket charge off", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("tc6393xb", TOSA_GPIO_BAT0_V_ON,
+			    "main battery", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("tc6393xb", TOSA_GPIO_BAT1_V_ON,
+			    "jacket battery", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("tc6393xb", TOSA_GPIO_BU_CHRG_ON,
+			    "backup battery", GPIO_ACTIVE_HIGH),
+		/* BAT1 and BAT0 thermistors appear to be swapped */
+		GPIO_LOOKUP("tc6393xb", TOSA_GPIO_BAT1_TH_ON,
+			    "main battery temp", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("tc6393xb", TOSA_GPIO_BAT0_TH_ON,
+			    "jacket battery temp", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("tc6393xb", TOSA_GPIO_BAT_SW_ON,
+			    "battery switch", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table *tc6393xb_gpio_lookups[] = {
+	&tosa_lcd_gpio_lookup,
+	&tosa_lcd_bl_gpio_lookup,
+	&tosa_audio_gpio_lookup,
+	&tosa_battery_gpio_lookup,
+};
+
+static int tc6393xb_register_gpio(struct tc6393xb *tc6393xb)
 {
-	tc6393xb->gpio.label = "tc6393xb";
-	tc6393xb->gpio.base = gpio_base;
-	tc6393xb->gpio.ngpio = 16;
-	tc6393xb->gpio.set = tc6393xb_gpio_set;
-	tc6393xb->gpio.get = tc6393xb_gpio_get;
-	tc6393xb->gpio.direction_input = tc6393xb_gpio_direction_input;
-	tc6393xb->gpio.direction_output = tc6393xb_gpio_direction_output;
-
-	return gpiochip_add_data(&tc6393xb->gpio, tc6393xb);
+	struct gpio_chip *gc = &tc6393xb->gpio;
+	struct device *dev = tc6393xb->dev;
+	int ret;
+
+	gc->label = "tc6393xb";
+	gc->base = -1; /* Dynamic allocation */
+	gc->ngpio = 16;
+	gc->set = tc6393xb_gpio_set;
+	gc->get = tc6393xb_gpio_get;
+	gc->direction_input = tc6393xb_gpio_direction_input;
+	gc->direction_output = tc6393xb_gpio_direction_output;
+
+	ret = devm_gpiochip_add_data(dev, gc, tc6393xb);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to add GPIO chip\n");
+
+	/* Register descriptor look-ups for consumers */
+	gpiod_add_lookup_tables(tc6393xb_gpio_lookups, ARRAY_SIZE(tc6393xb_gpio_lookups));
+
+	/* Request some of our own GPIOs */
+	tc6393xb->vcc_on = gpiochip_request_own_desc(gc, TOSA_GPIO_CARD_VCC_ON, "VCC ON",
+						     GPIO_ACTIVE_HIGH, GPIOD_OUT_HIGH);
+	if (IS_ERR(tc6393xb->vcc_on))
+		return dev_err_probe(dev, PTR_ERR(tc6393xb->vcc_on),
+				     "failed to request VCC ON GPIO\n");
+
+	return 0;
 }
 
 /*--------------------------------------------------------------------------*/
@@ -617,6 +697,7 @@ static int tc6393xb_probe(struct platform_device *dev)
 		ret = -ENOMEM;
 		goto err_kzalloc;
 	}
+	tc6393xb->dev = &dev->dev;
 
 	raw_spin_lock_init(&tc6393xb->lock);
 
@@ -676,22 +757,12 @@ static int tc6393xb_probe(struct platform_device *dev)
 			tmio_ioread8(tc6393xb->scr + SCR_REVID),
 			(unsigned long) iomem->start, tc6393xb->irq);
 
-	tc6393xb->gpio.base = -1;
-
-	if (tcpd->gpio_base >= 0) {
-		ret = tc6393xb_register_gpio(tc6393xb, tcpd->gpio_base);
-		if (ret)
-			goto err_gpio_add;
-	}
+	ret = tc6393xb_register_gpio(tc6393xb);
+	if (ret)
+		goto err_gpio_add;
 
 	tc6393xb_attach_irq(dev);
 
-	if (tcpd->setup) {
-		ret = tcpd->setup(dev);
-		if (ret)
-			goto err_setup;
-	}
-
 	tc6393xb_cells[TC6393XB_CELL_NAND].platform_data = tcpd->nand_data;
 	tc6393xb_cells[TC6393XB_CELL_NAND].pdata_size =
 						sizeof(*tcpd->nand_data);
@@ -705,15 +776,8 @@ static int tc6393xb_probe(struct platform_device *dev)
 	if (!ret)
 		return 0;
 
-	if (tcpd->teardown)
-		tcpd->teardown(dev);
-
-err_setup:
 	tc6393xb_detach_irq(dev);
-
 err_gpio_add:
-	if (tc6393xb->gpio.base != -1)
-		gpiochip_remove(&tc6393xb->gpio);
 	tcpd->disable(dev);
 err_enable:
 	clk_disable_unprepare(tc6393xb->clk);
@@ -738,14 +802,8 @@ static int tc6393xb_remove(struct platform_device *dev)
 
 	mfd_remove_devices(&dev->dev);
 
-	if (tcpd->teardown)
-		tcpd->teardown(dev);
-
 	tc6393xb_detach_irq(dev);
 
-	if (tc6393xb->gpio.base != -1)
-		gpiochip_remove(&tc6393xb->gpio);
-
 	ret = tcpd->disable(dev);
 	clk_disable_unprepare(tc6393xb->clk);
 	iounmap(tc6393xb->scr);
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 316393c694d7..0db9490dc659 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -31,10 +31,10 @@
 #include <linux/gfp.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include <linux/sizes.h>
 
-#include <mach/hardware.h>
 #include <linux/platform_data/mmc-pxamci.h>
 
 #include "pxamci.h"
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 7d96758a8f04..1749dbbacc13 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -16,8 +16,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <mach/hardware.h>
-
 #include <asm/mach/flash.h>
 
 #define CACHELINESIZE	32
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index c43267b18f55..c59ddde42007 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -50,18 +50,5 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD)		+= sa1100_simpad.o
 
 pxa2xx-obj-$(CONFIG_MACH_MAINSTONE)		+= pxa2xx_mainstone.o
 pxa2xx-obj-$(CONFIG_PXA_SHARPSL)		+= pxa2xx_sharpsl.o
-pxa2xx-obj-$(CONFIG_ARCOM_PCMCIA)		+= pxa2xx_viper.o
-pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
-pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
-pxa2xx-obj-$(CONFIG_MACH_PALMTC)		+= pxa2xx_palmtc.o
-pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
-pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
-pxa2xx-obj-$(CONFIG_MACH_VPAC270)		+= pxa2xx_vpac270.o
-pxa2xx-obj-$(CONFIG_MACH_BALLOON3)		+= pxa2xx_balloon3.o
-pxa2xx-obj-$(CONFIG_MACH_COLIBRI)		+= pxa2xx_colibri.o
-pxa2xx-obj-$(CONFIG_MACH_COLIBRI320)		+= pxa2xx_colibri.o
-pxa2xx-obj-$(CONFIG_MACH_H4700)			+= pxa2xx_hx4700.o
-
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
-
 obj-$(CONFIG_PCMCIA_XXS1500)			+= xxs1500_ss.o
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
deleted file mode 100644
index 5fe1da7a50e4..000000000000
--- a/drivers/pcmcia/pxa2xx_balloon3.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_balloon3.c
- *
- * Balloon3 PCMCIA specific routines.
- *
- *  Author:	Nick Bane
- *  Created:	June, 2006
- *  Copyright:	Toby Churchill Ltd
- *  Derived from pxa2xx_mainstone.c, by Nico Pitre
- *
- * Various modification by Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/balloon3.h>
-
-#include <asm/mach-types.h>
-
-#include "soc_common.h"
-
-static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	uint16_t ver;
-
-	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver < 0x4f08)
-		pr_warn("The FPGA code, version 0x%04x, is too old. "
-			"PCMCIA/CF support might be broken in this version!",
-			ver);
-
-	skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ;
-	skt->stat[SOC_STAT_CD].gpio = BALLOON3_GPIO_S0_CD;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
-	skt->stat[SOC_STAT_BVD1].irq = BALLOON3_BP_NSTSCHG_IRQ;
-	skt->stat[SOC_STAT_BVD1].name = "PCMCIA0 STSCHG";
-
-	return 0;
-}
-
-static unsigned long balloon3_pcmcia_status[2] = {
-	BALLOON3_CF_nSTSCHG_BVD1,
-	BALLOON3_CF_nSTSCHG_BVD1
-};
-
-static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				    struct pcmcia_state *state)
-{
-	uint16_t status;
-	int flip;
-
-	/* This actually reads the STATUS register */
-	status = __raw_readw(BALLOON3_CF_STATUS_REG);
-	flip = (status ^ balloon3_pcmcia_status[skt->nr])
-		& BALLOON3_CF_nSTSCHG_BVD1;
-	/*
-	 * Workaround for STSCHG which can't be deasserted:
-	 * We therefore disable/enable corresponding IRQs
-	 * as needed to avoid IRQ locks.
-	 */
-	if (flip) {
-		balloon3_pcmcia_status[skt->nr] = status;
-		if (status & BALLOON3_CF_nSTSCHG_BVD1)
-			enable_irq(BALLOON3_BP_NSTSCHG_IRQ);
-		else
-			disable_irq(BALLOON3_BP_NSTSCHG_IRQ);
-	}
-
-	state->ready	= !!(status & BALLOON3_CF_nIRQ);
-	state->bvd1	= !!(status & BALLOON3_CF_nSTSCHG_BVD1);
-	state->bvd2	= 0;	/* not available */
-	state->vs_3v	= 1;	/* Always true its a CF card */
-	state->vs_Xv	= 0;	/* not available */
-}
-
-static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				       const socket_state_t *state)
-{
-	__raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG +
-			((state->flags & SS_RESET) ?
-			BALLOON3_FPGA_SETnCLR : 0));
-	return 0;
-}
-
-static struct pcmcia_low_level balloon3_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= balloon3_pcmcia_hw_init,
-	.socket_state		= balloon3_pcmcia_socket_state,
-	.configure_socket	= balloon3_pcmcia_configure_socket,
-	.first			= 0,
-	.nr			= 1,
-};
-
-static struct platform_device *balloon3_pcmcia_device;
-
-static int __init balloon3_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_balloon3())
-		return -ENODEV;
-
-	balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!balloon3_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(balloon3_pcmcia_device,
-			&balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(balloon3_pcmcia_device);
-
-	if (ret)
-		platform_device_put(balloon3_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit balloon3_pcmcia_exit(void)
-{
-	platform_device_unregister(balloon3_pcmcia_device);
-}
-
-module_init(balloon3_pcmcia_init);
-module_exit(balloon3_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Nick Bane <nick@cecomputing.co.uk>");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver");
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index d6d2f75f8f47..0ea41f1411e5 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -23,12 +23,11 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
+#include <linux/soc/pxa/cpu.h>
+#include <linux/soc/pxa/smemc.h>
 
-#include <mach/hardware.h>
-#include <mach/smemc.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <mach/pxa2xx-regs.h>
 #include <asm/mach-types.h>
 
 #include <pcmcia/ss.h>
@@ -113,7 +112,7 @@ static inline u_int pxa2xx_pcmcia_cmd_time(u_int mem_clk_10khz,
 	return (300000 * (pcmcia_mcxx_asst + 1) / mem_clk_10khz);
 }
 
-static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock )
+static uint32_t pxa2xx_pcmcia_mcmem(int sock, int speed, int clock)
 {
 	uint32_t val;
 
@@ -124,12 +123,10 @@ static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock )
 		| ((pxa2xx_mcxx_hold(speed, clock)
 		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
-	__raw_writel(val, MCMEM(sock));
-
-	return 0;
+	return val;
 }
 
-static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock )
+static int pxa2xx_pcmcia_mcio(int sock, int speed, int clock)
 {
 	uint32_t val;
 
@@ -140,12 +137,11 @@ static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock )
 		| ((pxa2xx_mcxx_hold(speed, clock)
 		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
-	__raw_writel(val, MCIO(sock));
 
-	return 0;
+	return val;
 }
 
-static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock )
+static int pxa2xx_pcmcia_mcatt(int sock, int speed, int clock)
 {
 	uint32_t val;
 
@@ -156,31 +152,26 @@ static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock )
 		| ((pxa2xx_mcxx_hold(speed, clock)
 		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
-	__raw_writel(val, MCATT(sock));
 
-	return 0;
+	return val;
 }
 
-static int pxa2xx_pcmcia_set_mcxx(struct soc_pcmcia_socket *skt, unsigned int clk)
+static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
 {
+	unsigned long clk = clk_get_rate(skt->clk) / 10000;
 	struct soc_pcmcia_timing timing;
 	int sock = skt->nr;
 
 	soc_common_pcmcia_get_timing(skt, &timing);
 
-	pxa2xx_pcmcia_set_mcmem(sock, timing.mem, clk);
-	pxa2xx_pcmcia_set_mcatt(sock, timing.attr, clk);
-	pxa2xx_pcmcia_set_mcio(sock, timing.io, clk);
+	pxa_smemc_set_pcmcia_timing(sock,
+		pxa2xx_pcmcia_mcmem(sock, timing.mem, clk),
+		pxa2xx_pcmcia_mcatt(sock, timing.attr, clk),
+		pxa2xx_pcmcia_mcio(sock, timing.io, clk));
 
 	return 0;
 }
 
-static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
-{
-	unsigned long clk = clk_get_rate(skt->clk);
-	return pxa2xx_pcmcia_set_mcxx(skt, clk / 10000);
-}
-
 #ifdef CONFIG_CPU_FREQ
 
 static int
@@ -215,18 +206,13 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
 
 void pxa2xx_configure_sockets(struct device *dev, struct pcmcia_low_level *ops)
 {
-	/*
-	 * We have at least one socket, so set MECR:CIT
-	 * (Card Is There)
-	 */
-	uint32_t mecr = MECR_CIT;
+	int nr = 1;
 
-	/* Set MECR:NOS (Number Of Sockets) */
 	if ((ops->first + ops->nr) > 1 ||
 	    machine_is_viper() || machine_is_arcom_zeus())
-		mecr |= MECR_NOS;
+		nr = 2;
 
-	__raw_writel(mecr, MECR);
+	pxa_smemc_set_pcmcia_socket(nr);
 }
 EXPORT_SYMBOL(pxa2xx_configure_sockets);
 
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
deleted file mode 100644
index f0f725e99604..000000000000
--- a/drivers/pcmcia/pxa2xx_colibri.c
+++ /dev/null
@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_colibri.c
- *
- * Driver for Toradex Colibri PXA270 CF socket
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include "soc_common.h"
-
-#define	COLIBRI270_RESET_GPIO	53
-#define	COLIBRI270_PPEN_GPIO	107
-#define	COLIBRI270_BVD1_GPIO	83
-#define	COLIBRI270_BVD2_GPIO	82
-#define	COLIBRI270_DETECT_GPIO	84
-#define	COLIBRI270_READY_GPIO	1
-
-#define	COLIBRI320_RESET_GPIO	77
-#define	COLIBRI320_PPEN_GPIO	57
-#define	COLIBRI320_BVD1_GPIO	53
-#define	COLIBRI320_BVD2_GPIO	79
-#define	COLIBRI320_DETECT_GPIO	81
-#define	COLIBRI320_READY_GPIO	29
-
-enum {
-	DETECT = 0,
-	READY = 1,
-	BVD1 = 2,
-	BVD2 = 3,
-	PPEN = 4,
-	RESET = 5,
-};
-
-/* Contents of this array are configured on-the-fly in init function */
-static struct gpio colibri_pcmcia_gpios[] = {
-	{ 0,	GPIOF_IN,	"PCMCIA Detect" },
-	{ 0,	GPIOF_IN,	"PCMCIA Ready" },
-	{ 0,	GPIOF_IN,	"PCMCIA BVD1" },
-	{ 0,	GPIOF_IN,	"PCMCIA BVD2" },
-	{ 0,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
-	{ 0,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(colibri_pcmcia_gpios,
-				ARRAY_SIZE(colibri_pcmcia_gpios));
-	if (ret)
-		goto err1;
-
-	skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio);
-	skt->stat[SOC_STAT_CD].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio);
-	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-
-err1:
-	return ret;
-}
-
-static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(colibri_pcmcia_gpios,
-			ARRAY_SIZE(colibri_pcmcia_gpios));
-}
-
-static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-
-	state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio);
-	state->ready  = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio);
-	state->bvd1   = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio);
-	state->bvd2   = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio);
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio,
-			!(state->Vcc == 33 && state->Vpp < 50));
-	gpio_set_value(colibri_pcmcia_gpios[RESET].gpio,
-			state->flags & SS_RESET);
-	return 0;
-}
-
-static struct pcmcia_low_level colibri_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= colibri_pcmcia_hw_init,
-	.hw_shutdown		= colibri_pcmcia_hw_shutdown,
-
-	.socket_state		= colibri_pcmcia_socket_state,
-	.configure_socket	= colibri_pcmcia_configure_socket,
-};
-
-static struct platform_device *colibri_pcmcia_device;
-
-static int __init colibri_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_colibri() && !machine_is_colibri320())
-		return -ENODEV;
-
-	colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!colibri_pcmcia_device)
-		return -ENOMEM;
-
-	/* Colibri PXA270 */
-	if (machine_is_colibri()) {
-		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI270_RESET_GPIO;
-		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI270_PPEN_GPIO;
-		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI270_BVD1_GPIO;
-		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI270_BVD2_GPIO;
-		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI270_DETECT_GPIO;
-		colibri_pcmcia_gpios[READY].gpio	= COLIBRI270_READY_GPIO;
-	/* Colibri PXA320 */
-	} else if (machine_is_colibri320()) {
-		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI320_RESET_GPIO;
-		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI320_PPEN_GPIO;
-		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI320_BVD1_GPIO;
-		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI320_BVD2_GPIO;
-		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI320_DETECT_GPIO;
-		colibri_pcmcia_gpios[READY].gpio	= COLIBRI320_READY_GPIO;
-	}
-
-	ret = platform_device_add_data(colibri_pcmcia_device,
-		&colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(colibri_pcmcia_device);
-
-	if (ret)
-		platform_device_put(colibri_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit colibri_pcmcia_exit(void)
-{
-	platform_device_unregister(colibri_pcmcia_device);
-}
-
-module_init(colibri_pcmcia_init);
-module_exit(colibri_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270/PXA320");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c
deleted file mode 100644
index 72caa6d05ab9..000000000000
--- a/drivers/pcmcia/pxa2xx_e740.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Toshiba e740 PCMCIA specific routines.
- *
- * (c) 2004 Ian Molton <spyro@f2s.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <mach/eseries-gpio.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "soc_common.h"
-
-static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	if (skt->nr == 0) {
-		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD0;
-		skt->stat[SOC_STAT_CD].name = "CF card detect";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY0;
-		skt->stat[SOC_STAT_RDY].name = "CF ready";
-	} else {
-		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD1;
-		skt->stat[SOC_STAT_CD].name = "Wifi switch";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY1;
-		skt->stat[SOC_STAT_RDY].name = "Wifi ready";
-	}
-
-	return 0;
-}
-
-static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	if (state->flags & SS_RESET) {
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_RST0, 1);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_RST1, 1);
-	} else {
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_RST0, 0);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_RST1, 0);
-	}
-
-	switch (state->Vcc) {
-	case 0:	/* Socket off */
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1);
-		break;
-	case 50:
-	case 33: /* socket on */
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0);
-		break;
-	default:
-		printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc);
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level e740_pcmcia_ops = {
-	.owner            = THIS_MODULE,
-	.hw_init          = e740_pcmcia_hw_init,
-	.socket_state     = e740_pcmcia_socket_state,
-	.configure_socket = e740_pcmcia_configure_socket,
-	.nr               = 2,
-};
-
-static struct platform_device *e740_pcmcia_device;
-
-static int __init e740_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_e740())
-		return -ENODEV;
-
-	e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!e740_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops,
-					sizeof(e740_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(e740_pcmcia_device);
-
-	if (ret)
-		platform_device_put(e740_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit e740_pcmcia_exit(void)
-{
-	platform_device_unregister(e740_pcmcia_device);
-}
-
-module_init(e740_pcmcia_init);
-module_exit(e740_pcmcia_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_DESCRIPTION("e740 PCMCIA platform support");
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
deleted file mode 100644
index 87b6a1639d94..000000000000
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hx4700.h>
-
-#include "soc_common.h"
-
-static struct gpio gpios[] = {
-	{ GPIO114_HX4700_CF_RESET,    GPIOF_OUT_INIT_LOW,   "CF reset"        },
-	{ EGPIO4_CF_3V3_ON,           GPIOF_OUT_INIT_LOW,   "CF 3.3V enable"  },
-};
-
-static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (ret)
-		goto out;
-
-	/*
-	 * IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
-	 * The asic3 default IRQ type is level trigger low level detect, exactly
-	 * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
-	 * If the IRQ type is not changed, the asic3 interrupt handler will loop
-	 * repeatedly because it is unable to clear the level trigger interrupt.
-	 */
-	irq_set_irq_type(gpio_to_irq(GPIOD4_CF_nCD), IRQ_TYPE_EDGE_BOTH);
-
-	skt->stat[SOC_STAT_CD].gpio = GPIOD4_CF_nCD;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-	skt->stat[SOC_STAT_RDY].gpio = GPIO60_HX4700_CF_RNB;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-out:
-	return ret;
-}
-
-static void hx4700_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(gpios, ARRAY_SIZE(gpios));
-}
-
-static void hx4700_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-	struct pcmcia_state *state)
-{
-	state->vs_3v = 1;
-	state->vs_Xv = 0;
-}
-
-static int hx4700_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-	const socket_state_t *state)
-{
-	switch (state->Vcc) {
-	case 0:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 0);
-		break;
-	case 33:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 1);
-		break;
-	default:
-		printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc);
-		return -EINVAL;
-	}
-
-	gpio_set_value(GPIO114_HX4700_CF_RESET, (state->flags & SS_RESET) != 0);
-
-	return 0;
-}
-
-static struct pcmcia_low_level hx4700_pcmcia_ops = {
-	.owner          = THIS_MODULE,
-	.nr             = 1,
-	.hw_init        = hx4700_pcmcia_hw_init,
-	.hw_shutdown    = hx4700_pcmcia_hw_shutdown,
-	.socket_state   = hx4700_pcmcia_socket_state,
-	.configure_socket = hx4700_pcmcia_configure_socket,
-};
-
-static struct platform_device *hx4700_pcmcia_device;
-
-static int __init hx4700_pcmcia_init(void)
-{
-	struct platform_device *pdev;
-
-	if (!machine_is_h4700())
-		return -ENODEV;
-
-	pdev = platform_device_register_data(NULL, "pxa2xx-pcmcia", -1,
-		&hx4700_pcmcia_ops, sizeof(hx4700_pcmcia_ops));
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	hx4700_pcmcia_device = pdev;
-
-	return 0;
-}
-
-static void __exit hx4700_pcmcia_exit(void)
-{
-	platform_device_unregister(hx4700_pcmcia_device);
-}
-
-module_init(hx4700_pcmcia_init);
-module_exit(hx4700_pcmcia_exit);
-
-MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
-MODULE_DESCRIPTION("HP iPAQ hx4700 PCMCIA driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
deleted file mode 100644
index cfff41ac9ca2..000000000000
--- a/drivers/pcmcia/pxa2xx_palmld.c
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmld.c
- *
- * Driver for Palm LifeDrive PCMCIA
- *
- * Copyright (C) 2006 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <mach/palmld.h>
-#include "soc_common.h"
-
-static struct gpio palmld_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMLD_PCMCIA_POWER,	GPIOF_INIT_LOW,	"PCMCIA Power" },
-	{ GPIO_NR_PALMLD_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmld_pcmcia_gpios,
-				ARRAY_SIZE(palmld_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMLD_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios));
-}
-
-static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int palmld_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_POWER, 1);
-	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_RESET,
-			!!(state->flags & SS_RESET));
-
-	return 0;
-}
-
-static struct pcmcia_low_level palmld_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 1,
-	.nr			= 1,
-
-	.hw_init		= palmld_pcmcia_hw_init,
-	.hw_shutdown		= palmld_pcmcia_hw_shutdown,
-
-	.socket_state		= palmld_pcmcia_socket_state,
-	.configure_socket	= palmld_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmld_pcmcia_device;
-
-static int __init palmld_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmld())
-		return -ENODEV;
-
-	palmld_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmld_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmld_pcmcia_device, &palmld_pcmcia_ops,
-					sizeof(palmld_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmld_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmld_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmld_pcmcia_exit(void)
-{
-	platform_device_unregister(palmld_pcmcia_device);
-}
-
-module_init(palmld_pcmcia_init);
-module_exit(palmld_pcmcia_exit);
-
-MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
-	    " Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm LifeDrive");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
deleted file mode 100644
index 8fe05613ed04..000000000000
--- a/drivers/pcmcia/pxa2xx_palmtc.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmtc.c
- *
- * Driver for Palm Tungsten|C PCMCIA
- *
- * Copyright (C) 2008 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2009-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <mach/palmtc.h>
-#include "soc_common.h"
-
-static struct gpio palmtc_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMTC_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
-	{ GPIO_NR_PALMTC_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
-	{ GPIO_NR_PALMTC_PCMCIA_POWER3,	GPIOF_INIT_LOW,	"PCMCIA Power 3" },
-	{ GPIO_NR_PALMTC_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-	{ GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN,	"PCMCIA Power Ready" },
-};
-
-static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmtc_pcmcia_gpios,
-				ARRAY_SIZE(palmtc_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTC_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios));
-}
-
-static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int palmtc_wifi_powerdown(void)
-{
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
-	mdelay(40);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
-	return 0;
-}
-
-static int palmtc_wifi_powerup(void)
-{
-	int timeout = 50;
-
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1);
-	mdelay(50);
-
-	/* Power up the card, 1.8V first, after a while 3.3V */
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1);
-	mdelay(100);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1);
-
-	/* Wait till the card is ready */
-	while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) &&
-		timeout) {
-		mdelay(1);
-		timeout--;
-	}
-
-	/* Power down the WiFi in case of error */
-	if (!timeout) {
-		palmtc_wifi_powerdown();
-		return 1;
-	}
-
-	/* Reset the card */
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
-	mdelay(20);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0);
-	mdelay(25);
-
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
-
-	return 0;
-}
-
-static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	int ret = 1;
-
-	if (state->Vcc == 0)
-		ret = palmtc_wifi_powerdown();
-	else if (state->Vcc == 33)
-		ret = palmtc_wifi_powerup();
-
-	return ret;
-}
-
-static struct pcmcia_low_level palmtc_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= palmtc_pcmcia_hw_init,
-	.hw_shutdown		= palmtc_pcmcia_hw_shutdown,
-
-	.socket_state		= palmtc_pcmcia_socket_state,
-	.configure_socket	= palmtc_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmtc_pcmcia_device;
-
-static int __init palmtc_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmtc())
-		return -ENODEV;
-
-	palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmtc_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops,
-					sizeof(palmtc_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmtc_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmtc_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmtc_pcmcia_exit(void)
-{
-	platform_device_unregister(palmtc_pcmcia_device);
-}
-
-module_init(palmtc_pcmcia_init);
-module_exit(palmtc_pcmcia_exit);
-
-MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
-	    " Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
deleted file mode 100644
index c449ca72cb87..000000000000
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmtx.c
- *
- * Driver for Palm T|X PCMCIA
- *
- * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <mach/palmtx.h>
-#include "soc_common.h"
-
-static struct gpio palmtx_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMTX_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
-	{ GPIO_NR_PALMTX_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
-	{ GPIO_NR_PALMTX_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmtx_pcmcia_gpios,
-				ARRAY_SIZE(palmtx_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTX_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios));
-}
-
-static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-palmtx_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER1, 1);
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER2, 1);
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_RESET,
-			!!(state->flags & SS_RESET));
-
-	return 0;
-}
-
-static struct pcmcia_low_level palmtx_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= palmtx_pcmcia_hw_init,
-	.hw_shutdown		= palmtx_pcmcia_hw_shutdown,
-
-	.socket_state		= palmtx_pcmcia_socket_state,
-	.configure_socket	= palmtx_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmtx_pcmcia_device;
-
-static int __init palmtx_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmtx())
-		return -ENODEV;
-
-	palmtx_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmtx_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmtx_pcmcia_device, &palmtx_pcmcia_ops,
-					sizeof(palmtx_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmtx_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmtx_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmtx_pcmcia_exit(void)
-{
-	platform_device_unregister(palmtx_pcmcia_device);
-}
-
-module_init(palmtx_pcmcia_init);
-module_exit(palmtx_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm T|X");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 5fdd25a9e28e..b3ba858f70cb 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -15,11 +15,10 @@
 #include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/hardware/scoop.h>
 
-#include "soc_common.h"
+#include <pcmcia/soc_common.h>
 
 #define	NO_KEEP_VS 0x0001
 #define SCOOP_DEV platform_scoop_config->devs
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
deleted file mode 100644
index 6db8fe880ed4..000000000000
--- a/drivers/pcmcia/pxa2xx_trizeps4.c
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_trizeps4.c
- *
- * TRIZEPS PCMCIA specific routines.
- *
- * Author:	Jürgen Schindele
- * Created:	20 02, 2006
- * Copyright:	Jürgen Schindele
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <mach/pxa2xx-regs.h>
-#include <mach/trizeps4.h>
-
-#include "soc_common.h"
-
-extern void board_pcmcia_power(int power);
-
-static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	/* we dont have voltage/card/ready detection
-	 * so we dont need interrupts for it
-	 */
-	switch (skt->nr) {
-	case 0:
-		skt->stat[SOC_STAT_CD].gpio = GPIO_PCD;
-		skt->stat[SOC_STAT_CD].name = "cs0_cd";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_PRDY;
-		skt->stat[SOC_STAT_RDY].name = "cs0_rdy";
-		break;
-	default:
-		break;
-	}
-	/* release the reset of this card */
-	pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq);
-
-	return 0;
-}
-
-static unsigned long trizeps_pcmcia_status[2];
-
-static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				struct pcmcia_state *state)
-{
-	unsigned short status = 0, change;
-	status = CFSR_readw();
-	change = (status ^ trizeps_pcmcia_status[skt->nr]) &
-				ConXS_CFSR_BVD_MASK;
-	if (change) {
-		trizeps_pcmcia_status[skt->nr] = status;
-		if (status & ConXS_CFSR_BVD1) {
-			/* enable_irq empty */
-		} else {
-			/* disable_irq empty */
-		}
-	}
-
-	switch (skt->nr) {
-	case 0:
-		/* just fill in fix states */
-		state->bvd1   = (status & ConXS_CFSR_BVD1) ? 1 : 0;
-		state->bvd2   = (status & ConXS_CFSR_BVD2) ? 1 : 0;
-		state->vs_3v  = (status & ConXS_CFSR_VS1) ? 0 : 1;
-		state->vs_Xv  = (status & ConXS_CFSR_VS2) ? 0 : 1;
-		break;
-
-#ifndef CONFIG_MACH_TRIZEPS_CONXS
-	/* on ConXS we only have one slot. Second is inactive */
-	case 1:
-		state->detect = 0;
-		state->ready  = 0;
-		state->bvd1   = 0;
-		state->bvd2   = 0;
-		state->vs_3v  = 0;
-		state->vs_Xv  = 0;
-		break;
-
-#endif
-	}
-}
-
-static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	int ret = 0;
-	unsigned short power = 0;
-
-	/* we do nothing here just check a bit */
-	switch (state->Vcc) {
-	case 0:  power &= 0xfc; break;
-	case 33: power |= ConXS_BCR_S0_VCC_3V3; break;
-	case 50:
-		pr_err("%s(): Vcc 5V not supported in socket\n", __func__);
-		break;
-	default:
-		pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc);
-		ret = -1;
-	}
-
-	switch (state->Vpp) {
-	case 0:  power &= 0xf3; break;
-	case 33: power |= ConXS_BCR_S0_VPP_3V3; break;
-	case 120:
-		pr_err("%s(): Vpp 12V not supported in socket\n", __func__);
-		break;
-	default:
-		if (state->Vpp != state->Vcc) {
-			pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp);
-			ret = -1;
-		}
-	}
-
-	switch (skt->nr) {
-	case 0:			 /* we only have 3.3V */
-		board_pcmcia_power(power);
-		break;
-
-#ifndef CONFIG_MACH_TRIZEPS_CONXS
-	/* on ConXS we only have one slot. Second is inactive */
-	case 1:
-#endif
-	default:
-		break;
-	}
-
-	return ret;
-}
-
-static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-{
-	/* default is on */
-	board_pcmcia_power(0x9);
-}
-
-static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-{
-	board_pcmcia_power(0x0);
-}
-
-static struct pcmcia_low_level trizeps_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= trizeps_pcmcia_hw_init,
-	.socket_state		= trizeps_pcmcia_socket_state,
-	.configure_socket	= trizeps_pcmcia_configure_socket,
-	.socket_init		= trizeps_pcmcia_socket_init,
-	.socket_suspend		= trizeps_pcmcia_socket_suspend,
-#ifdef CONFIG_MACH_TRIZEPS_CONXS
-	.nr			= 1,
-#else
-	.nr			= 2,
-#endif
-	.first			= 0,
-};
-
-static struct platform_device *trizeps_pcmcia_device;
-
-static int __init trizeps_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_trizeps4() && !machine_is_trizeps4wl())
-		return -ENODEV;
-
-	trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!trizeps_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(trizeps_pcmcia_device,
-			&trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops));
-
-	if (ret == 0)
-		ret = platform_device_add(trizeps_pcmcia_device);
-
-	if (ret)
-		platform_device_put(trizeps_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit trizeps_pcmcia_exit(void)
-{
-	platform_device_unregister(trizeps_pcmcia_device);
-}
-
-fs_initcall(trizeps_pcmcia_init);
-module_exit(trizeps_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Juergen Schindele");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
deleted file mode 100644
index 7ac6647d286e..000000000000
--- a/drivers/pcmcia/pxa2xx_viper.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Viper/Zeus PCMCIA support
- *   Copyright 2004 Arcom Control Systems
- *
- * Maintained by Marc Zyngier <maz@misterjones.org>
- *
- * Based on:
- *   iPAQ h2200 PCMCIA support
- *   Copyright 2004 Koen Kooi <koen@vestingbar.nl>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <pcmcia/ss.h>
-
-#include <asm/irq.h>
-
-#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
-
-#include "soc_common.h"
-#include "pxa2xx_base.h"
-
-static struct platform_device *arcom_pcmcia_dev;
-
-static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
-{
-	return arcom_pcmcia_dev->dev.platform_data;
-}
-
-static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-	unsigned long flags;
-
-	skt->stat[SOC_STAT_CD].gpio = pdata->cd_gpio;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA_CD";
-	skt->stat[SOC_STAT_RDY].gpio = pdata->rdy_gpio;
-	skt->stat[SOC_STAT_RDY].name = "CF ready";
-
-	if (gpio_request(pdata->pwr_gpio, "CF power"))
-		goto err_request_pwr;
-
-	local_irq_save(flags);
-
-	if (gpio_direction_output(pdata->pwr_gpio, 0)) {
-		local_irq_restore(flags);
-		goto err_dir;
-	}
-
-	local_irq_restore(flags);
-
-	return 0;
-
-err_dir:
-	gpio_free(pdata->pwr_gpio);
-err_request_pwr:
-	dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
-	return -1;
-}
-
-/*
- * Release all resources.
- */
-static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-
-	gpio_free(pdata->pwr_gpio);
-}
-
-static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				      struct pcmcia_state *state)
-{
-	state->vs_3v  = 1; /* Can only apply 3.3V */
-	state->vs_Xv  = 0;
-}
-
-static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					 const socket_state_t *state)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-
-	/* Silently ignore Vpp, output enable, speaker enable. */
-	pdata->reset(state->flags & SS_RESET);
-
-	/* Apply socket voltage */
-	switch (state->Vcc) {
-	case 0:
-		gpio_set_value(pdata->pwr_gpio, 0);
-		break;
-	case 33:
-		gpio_set_value(pdata->pwr_gpio, 1);
-		break;
-	default:
-		dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc);
-		return -1;
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level viper_pcmcia_ops = {
-	.owner          	= THIS_MODULE,
-	.hw_init        	= viper_pcmcia_hw_init,
-	.hw_shutdown		= viper_pcmcia_hw_shutdown,
-	.socket_state		= viper_pcmcia_socket_state,
-	.configure_socket	= viper_pcmcia_configure_socket,
-	.nr         		= 1,
-};
-
-static struct platform_device *viper_pcmcia_device;
-
-static int viper_pcmcia_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	/* I can't imagine more than one device, but you never know... */
-	if (arcom_pcmcia_dev)
-		return -EEXIST;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!viper_pcmcia_device)
-		return -ENOMEM;
-
-	arcom_pcmcia_dev = pdev;
-
-	viper_pcmcia_device->dev.parent = &pdev->dev;
-
-	ret = platform_device_add_data(viper_pcmcia_device,
-				       &viper_pcmcia_ops,
-				       sizeof(viper_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(viper_pcmcia_device);
-
-	if (ret) {
-		platform_device_put(viper_pcmcia_device);
-		arcom_pcmcia_dev = NULL;
-	}
-
-	return ret;
-}
-
-static int viper_pcmcia_remove(struct platform_device *pdev)
-{
-	platform_device_unregister(viper_pcmcia_device);
-	arcom_pcmcia_dev = NULL;
-	return 0;
-}
-
-static struct platform_device_id viper_pcmcia_id_table[] = {
-	{ .name = "viper-pcmcia", },
-	{ .name = "zeus-pcmcia",  },
-	{ },
-};
-
-static struct platform_driver viper_pcmcia_driver = {
-	.probe		= viper_pcmcia_probe,
-	.remove		= viper_pcmcia_remove,
-	.driver		= {
-		.name	= "arcom-pcmcia",
-	},
-	.id_table	= viper_pcmcia_id_table,
-};
-
-module_platform_driver(viper_pcmcia_driver);
-
-MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
deleted file mode 100644
index 3565add03a5e..000000000000
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_vpac270.c
- *
- * Driver for Voipac PXA270 PCMCIA and CF sockets
- *
- * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/vpac270.h>
-
-#include "soc_common.h"
-
-static struct gpio vpac270_pcmcia_gpios[] = {
-	{ GPIO107_VPAC270_PCMCIA_PPEN,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
-	{ GPIO11_VPAC270_PCMCIA_RESET,	GPIOF_INIT_LOW,	"PCMCIA Reset" },
-};
-
-static struct gpio vpac270_cf_gpios[] = {
-	{ GPIO16_VPAC270_CF_RESET,	GPIOF_INIT_LOW,	"CF Reset" },
-};
-
-static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	if (skt->nr == 0) {
-		ret = gpio_request_array(vpac270_pcmcia_gpios,
-				ARRAY_SIZE(vpac270_pcmcia_gpios));
-
-		skt->stat[SOC_STAT_CD].gpio = GPIO84_VPAC270_PCMCIA_CD;
-		skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO35_VPAC270_PCMCIA_RDY;
-		skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-	} else {
-		ret = gpio_request_array(vpac270_cf_gpios,
-				ARRAY_SIZE(vpac270_cf_gpios));
-
-		skt->stat[SOC_STAT_CD].gpio = GPIO17_VPAC270_CF_CD;
-		skt->stat[SOC_STAT_CD].name = "CF CD";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO12_VPAC270_CF_RDY;
-		skt->stat[SOC_STAT_RDY].name = "CF Ready";
-	}
-
-	return ret;
-}
-
-static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	if (skt->nr == 0)
-		gpio_free_array(vpac270_pcmcia_gpios,
-					ARRAY_SIZE(vpac270_pcmcia_gpios));
-	else
-		gpio_free_array(vpac270_cf_gpios,
-					ARRAY_SIZE(vpac270_cf_gpios));
-}
-
-static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-vpac270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	if (skt->nr == 0) {
-		gpio_set_value(GPIO11_VPAC270_PCMCIA_RESET,
-			(state->flags & SS_RESET));
-		gpio_set_value(GPIO107_VPAC270_PCMCIA_PPEN,
-			!(state->Vcc == 33 || state->Vcc == 50));
-	} else {
-		gpio_set_value(GPIO16_VPAC270_CF_RESET,
-			(state->flags & SS_RESET));
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level vpac270_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 2,
-
-	.hw_init		= vpac270_pcmcia_hw_init,
-	.hw_shutdown		= vpac270_pcmcia_hw_shutdown,
-
-	.socket_state		= vpac270_pcmcia_socket_state,
-	.configure_socket	= vpac270_pcmcia_configure_socket,
-};
-
-static struct platform_device *vpac270_pcmcia_device;
-
-static int __init vpac270_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_vpac270())
-		return -ENODEV;
-
-	vpac270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!vpac270_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(vpac270_pcmcia_device,
-		&vpac270_pcmcia_ops, sizeof(vpac270_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(vpac270_pcmcia_device);
-
-	if (ret)
-		platform_device_put(vpac270_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit vpac270_pcmcia_exit(void)
-{
-	platform_device_unregister(vpac270_pcmcia_device);
-}
-
-module_init(vpac270_pcmcia_init);
-module_exit(vpac270_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Voipac PXA270");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 29fdd174bc23..bce664bbdc98 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -17,7 +17,6 @@
 
 #include <pcmcia/ss.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c
index 7feb8d61c639..f1b5160cb8fa 100644
--- a/drivers/pcmcia/sa1111_lubbock.c
+++ b/drivers/pcmcia/sa1111_lubbock.c
@@ -17,7 +17,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 3a8c84bb174d..61b0c8952bb5 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -46,8 +46,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
 #include <linux/timer.h>
-
-#include <mach/hardware.h>
+#include <linux/pci.h>
 
 #include "soc_common.h"
 
@@ -784,8 +783,7 @@ void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt)
 	/* should not be required; violates some lowlevel drivers */
 	soc_common_pcmcia_config_skt(skt, &dead_socket);
 
-	iounmap(skt->virt_io);
-	skt->virt_io = NULL;
+	iounmap(PCI_IOBASE + skt->res_io_io.start);
 	release_resource(&skt->res_attr);
 	release_resource(&skt->res_mem);
 	release_resource(&skt->res_io);
@@ -818,11 +816,12 @@ int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt)
 	if (ret)
 		goto out_err_4;
 
-	skt->virt_io = ioremap(skt->res_io.start, 0x10000);
-	if (skt->virt_io == NULL) {
-		ret = -ENOMEM;
+	skt->res_io_io = (struct resource)
+		 DEFINE_RES_IO_NAMED(skt->nr * 0x1000 + 0x10000, 0x1000,
+				     "PCMCIA I/O");
+	ret = pci_remap_iospace(&skt->res_io_io, skt->res_io.start);
+	if (ret)
 		goto out_err_5;
-	}
 
 	/*
 	 * We initialize default socket timing here, because
@@ -840,7 +839,7 @@ int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt)
 	skt->socket.resource_ops = &pccard_static_ops;
 	skt->socket.irq_mask = 0;
 	skt->socket.map_size = PAGE_SIZE;
-	skt->socket.io_offset = (unsigned long)skt->virt_io;
+	skt->socket.io_offset = (unsigned long)skt->res_io_io.start;
 
 	skt->status = soc_common_pcmcia_skt_state(skt);
 
@@ -874,7 +873,7 @@ int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt)
  out_err_7:
 	soc_pcmcia_hw_shutdown(skt);
  out_err_6:
-	iounmap(skt->virt_io);
+	iounmap(PCI_IOBASE + skt->res_io_io.start);
  out_err_5:
 	release_resource(&skt->res_attr);
  out_err_4:
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index 222e81c79365..17ef05aa8afe 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -13,137 +13,19 @@
 /* include the world */
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
-#include <pcmcia/ss.h>
 #include <pcmcia/cistpl.h>
-
+#include <pcmcia/soc_common.h>
 
 struct device;
 struct gpio_desc;
 struct pcmcia_low_level;
 struct regulator;
 
-struct soc_pcmcia_regulator {
-	struct regulator	*reg;
-	bool			on;
-};
-
-/*
- * This structure encapsulates per-socket state which we might need to
- * use when responding to a Card Services query of some kind.
- */
-struct soc_pcmcia_socket {
-	struct pcmcia_socket	socket;
-
-	/*
-	 * Info from low level handler
-	 */
-	unsigned int		nr;
-	struct clk		*clk;
-
-	/*
-	 * Core PCMCIA state
-	 */
-	const struct pcmcia_low_level *ops;
-
-	unsigned int		status;
-	socket_state_t		cs_state;
-
-	unsigned short		spd_io[MAX_IO_WIN];
-	unsigned short		spd_mem[MAX_WIN];
-	unsigned short		spd_attr[MAX_WIN];
-
-	struct resource		res_skt;
-	struct resource		res_io;
-	struct resource		res_mem;
-	struct resource		res_attr;
-	void __iomem		*virt_io;
-
-	struct {
-		int		gpio;
-		struct gpio_desc *desc;
-		unsigned int	irq;
-		const char	*name;
-	} stat[6];
-#define SOC_STAT_CD		0	/* Card detect */
-#define SOC_STAT_BVD1		1	/* BATDEAD / IOSTSCHG */
-#define SOC_STAT_BVD2		2	/* BATWARN / IOSPKR */
-#define SOC_STAT_RDY		3	/* Ready / Interrupt */
-#define SOC_STAT_VS1		4	/* Voltage sense 1 */
-#define SOC_STAT_VS2		5	/* Voltage sense 2 */
-
-	struct gpio_desc	*gpio_reset;
-	struct gpio_desc	*gpio_bus_enable;
-	struct soc_pcmcia_regulator vcc;
-	struct soc_pcmcia_regulator vpp;
-
-	unsigned int		irq_state;
-
-#ifdef CONFIG_CPU_FREQ
-	struct notifier_block	cpufreq_nb;
-#endif
-	struct timer_list	poll_timer;
-	struct list_head	node;
-	void *driver_data;
-};
-
 struct skt_dev_info {
 	int nskt;
 	struct soc_pcmcia_socket skt[];
 };
 
-struct pcmcia_state {
-  unsigned detect: 1,
-            ready: 1,
-             bvd1: 1,
-             bvd2: 1,
-           wrprot: 1,
-            vs_3v: 1,
-            vs_Xv: 1;
-};
-
-struct pcmcia_low_level {
-	struct module *owner;
-
-	/* first socket in system */
-	int first;
-	/* nr of sockets */
-	int nr;
-
-	int (*hw_init)(struct soc_pcmcia_socket *);
-	void (*hw_shutdown)(struct soc_pcmcia_socket *);
-
-	void (*socket_state)(struct soc_pcmcia_socket *, struct pcmcia_state *);
-	int (*configure_socket)(struct soc_pcmcia_socket *, const socket_state_t *);
-
-	/*
-	 * Enable card status IRQs on (re-)initialisation.  This can
-	 * be called at initialisation, power management event, or
-	 * pcmcia event.
-	 */
-	void (*socket_init)(struct soc_pcmcia_socket *);
-
-	/*
-	 * Disable card status IRQs and PCMCIA bus on suspend.
-	 */
-	void (*socket_suspend)(struct soc_pcmcia_socket *);
-
-	/*
-	 * Hardware specific timing routines.
-	 * If provided, the get_timing routine overrides the SOC default.
-	 */
-	unsigned int (*get_timing)(struct soc_pcmcia_socket *, unsigned int, unsigned int);
-	int (*set_timing)(struct soc_pcmcia_socket *);
-	int (*show_timing)(struct soc_pcmcia_socket *, char *);
-
-#ifdef CONFIG_CPU_FREQ
-	/*
-	 * CPUFREQ support.
-	 */
-	int (*frequency_change)(struct soc_pcmcia_socket *, unsigned long, struct cpufreq_freqs *);
-#endif
-};
-
-
 struct soc_pcmcia_timing {
 	unsigned short io;
 	unsigned short mem;
diff --git a/drivers/power/supply/tosa_battery.c b/drivers/power/supply/tosa_battery.c
index 32cc31cd4761..73d4aca4c386 100644
--- a/drivers/power/supply/tosa_battery.c
+++ b/drivers/power/supply/tosa_battery.c
@@ -12,10 +12,9 @@
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <asm/mach-types.h>
-#include <mach/tosa.h>
 
 static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
 static struct work_struct bat_work;
@@ -28,22 +27,23 @@ struct tosa_bat {
 	struct mutex work_lock; /* protects data */
 
 	bool (*is_present)(struct tosa_bat *bat);
-	int gpio_full;
-	int gpio_charge_off;
+	struct gpio_desc *gpiod_full;
+	struct gpio_desc *gpiod_charge_off;
 
 	int technology;
 
-	int gpio_bat;
+	struct gpio_desc *gpiod_bat;
 	int adc_bat;
 	int adc_bat_divider;
 	int bat_max;
 	int bat_min;
 
-	int gpio_temp;
+	struct gpio_desc *gpiod_temp;
 	int adc_temp;
 	int adc_temp_divider;
 };
 
+static struct gpio_desc *jacket_detect;
 static struct tosa_bat tosa_bat_main;
 static struct tosa_bat tosa_bat_jacket;
 
@@ -51,15 +51,15 @@ static unsigned long tosa_read_bat(struct tosa_bat *bat)
 {
 	unsigned long value = 0;
 
-	if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+	if (!bat->gpiod_bat || bat->adc_bat < 0)
 		return 0;
 
 	mutex_lock(&bat_lock);
-	gpio_set_value(bat->gpio_bat, 1);
+	gpiod_set_value(bat->gpiod_bat, 1);
 	msleep(5);
 	value = wm97xx_read_aux_adc(dev_get_drvdata(bat->psy->dev.parent),
 			bat->adc_bat);
-	gpio_set_value(bat->gpio_bat, 0);
+	gpiod_set_value(bat->gpiod_bat, 0);
 	mutex_unlock(&bat_lock);
 
 	value = value * 1000000 / bat->adc_bat_divider;
@@ -71,15 +71,15 @@ static unsigned long tosa_read_temp(struct tosa_bat *bat)
 {
 	unsigned long value = 0;
 
-	if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+	if (!bat->gpiod_temp || bat->adc_temp < 0)
 		return 0;
 
 	mutex_lock(&bat_lock);
-	gpio_set_value(bat->gpio_temp, 1);
+	gpiod_set_value(bat->gpiod_temp, 1);
 	msleep(5);
 	value = wm97xx_read_aux_adc(dev_get_drvdata(bat->psy->dev.parent),
 			bat->adc_temp);
-	gpio_set_value(bat->gpio_temp, 0);
+	gpiod_set_value(bat->gpiod_temp, 0);
 	mutex_unlock(&bat_lock);
 
 	value = value * 10000 / bat->adc_temp_divider;
@@ -136,7 +136,7 @@ static int tosa_bat_get_property(struct power_supply *psy,
 
 static bool tosa_jacket_bat_is_present(struct tosa_bat *bat)
 {
-	return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0;
+	return gpiod_get_value(jacket_detect) == 0;
 }
 
 static void tosa_bat_external_power_changed(struct power_supply *psy)
@@ -166,23 +166,23 @@ static void tosa_bat_update(struct tosa_bat *bat)
 		bat->full_chrg = -1;
 	} else if (power_supply_am_i_supplied(psy)) {
 		if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
-			gpio_set_value(bat->gpio_charge_off, 0);
+			gpiod_set_value(bat->gpiod_charge_off, 0);
 			mdelay(15);
 		}
 
-		if (gpio_get_value(bat->gpio_full)) {
+		if (gpiod_get_value(bat->gpiod_full)) {
 			if (old == POWER_SUPPLY_STATUS_CHARGING ||
 					bat->full_chrg == -1)
 				bat->full_chrg = tosa_read_bat(bat);
 
-			gpio_set_value(bat->gpio_charge_off, 1);
+			gpiod_set_value(bat->gpiod_charge_off, 1);
 			bat->status = POWER_SUPPLY_STATUS_FULL;
 		} else {
-			gpio_set_value(bat->gpio_charge_off, 0);
+			gpiod_set_value(bat->gpiod_charge_off, 0);
 			bat->status = POWER_SUPPLY_STATUS_CHARGING;
 		}
 	} else {
-		gpio_set_value(bat->gpio_charge_off, 1);
+		gpiod_set_value(bat->gpiod_charge_off, 1);
 		bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
 	}
 
@@ -251,18 +251,18 @@ static struct tosa_bat tosa_bat_main = {
 	.full_chrg = -1,
 	.psy = NULL,
 
-	.gpio_full = TOSA_GPIO_BAT0_CRG,
-	.gpio_charge_off = TOSA_GPIO_CHARGE_OFF,
+	.gpiod_full = NULL,
+	.gpiod_charge_off = NULL,
 
 	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
 
-	.gpio_bat = TOSA_GPIO_BAT0_V_ON,
+	.gpiod_bat = NULL,
 	.adc_bat = WM97XX_AUX_ID3,
 	.adc_bat_divider = 414,
 	.bat_max = 4310000,
 	.bat_min = 1551 * 1000000 / 414,
 
-	.gpio_temp = TOSA_GPIO_BAT1_TH_ON,
+	.gpiod_temp = NULL,
 	.adc_temp = WM97XX_AUX_ID2,
 	.adc_temp_divider = 10000,
 };
@@ -273,18 +273,18 @@ static struct tosa_bat tosa_bat_jacket = {
 	.psy = NULL,
 
 	.is_present = tosa_jacket_bat_is_present,
-	.gpio_full = TOSA_GPIO_BAT1_CRG,
-	.gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC,
+	.gpiod_full = NULL,
+	.gpiod_charge_off = NULL,
 
 	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
 
-	.gpio_bat = TOSA_GPIO_BAT1_V_ON,
+	.gpiod_bat = NULL,
 	.adc_bat = WM97XX_AUX_ID3,
 	.adc_bat_divider = 414,
 	.bat_max = 4310000,
 	.bat_min = 1551 * 1000000 / 414,
 
-	.gpio_temp = TOSA_GPIO_BAT0_TH_ON,
+	.gpiod_temp = NULL,
 	.adc_temp = WM97XX_AUX_ID2,
 	.adc_temp_divider = 10000,
 };
@@ -294,36 +294,20 @@ static struct tosa_bat tosa_bat_bu = {
 	.full_chrg = -1,
 	.psy = NULL,
 
-	.gpio_full = -1,
-	.gpio_charge_off = -1,
+	.gpiod_full = NULL,
+	.gpiod_charge_off = NULL,
 
 	.technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
 
-	.gpio_bat = TOSA_GPIO_BU_CHRG_ON,
+	.gpiod_bat = NULL,
 	.adc_bat = WM97XX_AUX_ID4,
 	.adc_bat_divider = 1266,
 
-	.gpio_temp = -1,
+	.gpiod_temp = NULL,
 	.adc_temp = -1,
 	.adc_temp_divider = -1,
 };
 
-static struct gpio tosa_bat_gpios[] = {
-	{ TOSA_GPIO_CHARGE_OFF,	   GPIOF_OUT_INIT_HIGH, "main charge off" },
-	{ TOSA_GPIO_CHARGE_OFF_JC, GPIOF_OUT_INIT_HIGH, "jacket charge off" },
-	{ TOSA_GPIO_BAT_SW_ON,	   GPIOF_OUT_INIT_LOW,	"battery switch" },
-	{ TOSA_GPIO_BAT0_V_ON,	   GPIOF_OUT_INIT_LOW,	"main battery" },
-	{ TOSA_GPIO_BAT1_V_ON,	   GPIOF_OUT_INIT_LOW,	"jacket battery" },
-	{ TOSA_GPIO_BAT1_TH_ON,	   GPIOF_OUT_INIT_LOW,	"main battery temp" },
-	{ TOSA_GPIO_BAT0_TH_ON,	   GPIOF_OUT_INIT_LOW,	"jacket battery temp" },
-	{ TOSA_GPIO_BU_CHRG_ON,	   GPIOF_OUT_INIT_LOW,	"backup battery" },
-	{ TOSA_GPIO_BAT0_CRG,	   GPIOF_IN,		"main battery full" },
-	{ TOSA_GPIO_BAT1_CRG,	   GPIOF_IN,		"jacket battery full" },
-	{ TOSA_GPIO_BAT0_LOW,	   GPIOF_IN,		"main battery low" },
-	{ TOSA_GPIO_BAT1_LOW,	   GPIOF_IN,		"jacket battery low" },
-	{ TOSA_GPIO_JACKET_DETECT, GPIOF_IN,		"jacket detect" },
-};
-
 #ifdef CONFIG_PM
 static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
 {
@@ -343,19 +327,83 @@ static int tosa_bat_resume(struct platform_device *dev)
 #define tosa_bat_resume NULL
 #endif
 
-static int tosa_bat_probe(struct platform_device *dev)
+static int tosa_bat_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct power_supply_config main_psy_cfg = {},
 				   jacket_psy_cfg = {},
 				   bu_psy_cfg = {};
+	struct device *dev = &pdev->dev;
+	struct gpio_desc *dummy;
 
 	if (!machine_is_tosa())
 		return -ENODEV;
 
-	ret = gpio_request_array(tosa_bat_gpios, ARRAY_SIZE(tosa_bat_gpios));
-	if (ret)
-		return ret;
+	/* Main charging control GPIOs */
+	tosa_bat_main.gpiod_charge_off = devm_gpiod_get(dev, "main charge off", GPIOD_OUT_HIGH);
+	if (IS_ERR(tosa_bat_main.gpiod_charge_off))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_main.gpiod_charge_off),
+				     "no main charger GPIO\n");
+	tosa_bat_jacket.gpiod_charge_off = devm_gpiod_get(dev, "jacket charge off", GPIOD_OUT_HIGH);
+	if (IS_ERR(tosa_bat_jacket.gpiod_charge_off))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_jacket.gpiod_charge_off),
+				     "no jacket charger GPIO\n");
+
+	/* Per-battery output check (routes battery voltage to ADC) */
+	tosa_bat_main.gpiod_bat = devm_gpiod_get(dev, "main battery", GPIOD_OUT_LOW);
+	if (IS_ERR(tosa_bat_main.gpiod_bat))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_main.gpiod_bat),
+				     "no main battery GPIO\n");
+	tosa_bat_jacket.gpiod_bat = devm_gpiod_get(dev, "jacket battery", GPIOD_OUT_LOW);
+	if (IS_ERR(tosa_bat_jacket.gpiod_bat))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_jacket.gpiod_bat),
+				     "no jacket battery GPIO\n");
+	tosa_bat_bu.gpiod_bat = devm_gpiod_get(dev, "backup battery", GPIOD_OUT_LOW);
+	if (IS_ERR(tosa_bat_bu.gpiod_bat))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_bu.gpiod_bat),
+				     "no backup battery GPIO\n");
+
+	/* Battery full detect GPIOs (using PXA SoC GPIOs) */
+	tosa_bat_main.gpiod_full = devm_gpiod_get(dev, "main battery full", GPIOD_IN);
+	if (IS_ERR(tosa_bat_main.gpiod_full))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_main.gpiod_full),
+				     "no main battery full GPIO\n");
+	tosa_bat_jacket.gpiod_full = devm_gpiod_get(dev, "jacket battery full", GPIOD_IN);
+	if (IS_ERR(tosa_bat_jacket.gpiod_full))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_jacket.gpiod_full),
+				     "no jacket battery full GPIO\n");
+
+	/* Battery temperature GPIOs (routes thermistor voltage to ADC) */
+	tosa_bat_main.gpiod_temp = devm_gpiod_get(dev, "main battery temp", GPIOD_OUT_LOW);
+	if (IS_ERR(tosa_bat_main.gpiod_temp))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_main.gpiod_temp),
+				     "no main battery temp GPIO\n");
+	tosa_bat_jacket.gpiod_temp = devm_gpiod_get(dev, "jacket battery temp", GPIOD_OUT_LOW);
+	if (IS_ERR(tosa_bat_jacket.gpiod_temp))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_jacket.gpiod_temp),
+				     "no jacket battery temp GPIO\n");
+
+	/* Jacket detect GPIO */
+	jacket_detect = devm_gpiod_get(dev, "jacket detect", GPIOD_IN);
+	if (IS_ERR(jacket_detect))
+		return dev_err_probe(dev, PTR_ERR(jacket_detect),
+				     "no jacket detect GPIO\n");
+
+	/* Battery low indication GPIOs (not used, we just request them) */
+	dummy = devm_gpiod_get(dev, "main battery low", GPIOD_IN);
+	if (IS_ERR(dummy))
+		return dev_err_probe(dev, PTR_ERR(dummy),
+				     "no main battery low GPIO\n");
+	dummy = devm_gpiod_get(dev, "jacket battery low", GPIOD_IN);
+	if (IS_ERR(dummy))
+		return dev_err_probe(dev, PTR_ERR(dummy),
+				     "no jacket battery low GPIO\n");
+
+	/* Battery switch GPIO (not used just requested) */
+	dummy = devm_gpiod_get(dev, "battery switch", GPIOD_OUT_LOW);
+	if (IS_ERR(dummy))
+		return dev_err_probe(dev, PTR_ERR(dummy),
+				     "no battery switch GPIO\n");
 
 	mutex_init(&tosa_bat_main.work_lock);
 	mutex_init(&tosa_bat_jacket.work_lock);
@@ -363,7 +411,7 @@ static int tosa_bat_probe(struct platform_device *dev)
 	INIT_WORK(&bat_work, tosa_bat_work);
 
 	main_psy_cfg.drv_data = &tosa_bat_main;
-	tosa_bat_main.psy = power_supply_register(&dev->dev,
+	tosa_bat_main.psy = power_supply_register(dev,
 						  &tosa_bat_main_desc,
 						  &main_psy_cfg);
 	if (IS_ERR(tosa_bat_main.psy)) {
@@ -372,7 +420,7 @@ static int tosa_bat_probe(struct platform_device *dev)
 	}
 
 	jacket_psy_cfg.drv_data = &tosa_bat_jacket;
-	tosa_bat_jacket.psy = power_supply_register(&dev->dev,
+	tosa_bat_jacket.psy = power_supply_register(dev,
 						    &tosa_bat_jacket_desc,
 						    &jacket_psy_cfg);
 	if (IS_ERR(tosa_bat_jacket.psy)) {
@@ -381,28 +429,28 @@ static int tosa_bat_probe(struct platform_device *dev)
 	}
 
 	bu_psy_cfg.drv_data = &tosa_bat_bu;
-	tosa_bat_bu.psy = power_supply_register(&dev->dev, &tosa_bat_bu_desc,
+	tosa_bat_bu.psy = power_supply_register(dev, &tosa_bat_bu_desc,
 						&bu_psy_cfg);
 	if (IS_ERR(tosa_bat_bu.psy)) {
 		ret = PTR_ERR(tosa_bat_bu.psy);
 		goto err_psy_reg_bu;
 	}
 
-	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
+	ret = request_irq(gpiod_to_irq(tosa_bat_main.gpiod_full),
 				tosa_bat_gpio_isr,
 				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"main full", &tosa_bat_main);
 	if (ret)
 		goto err_req_main;
 
-	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
+	ret = request_irq(gpiod_to_irq(tosa_bat_jacket.gpiod_full),
 				tosa_bat_gpio_isr,
 				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"jacket full", &tosa_bat_jacket);
 	if (ret)
 		goto err_req_jacket;
 
-	ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT),
+	ret = request_irq(gpiod_to_irq(jacket_detect),
 				tosa_bat_gpio_isr,
 				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"jacket detect", &tosa_bat_jacket);
@@ -411,9 +459,9 @@ static int tosa_bat_probe(struct platform_device *dev)
 		return 0;
 	}
 
-	free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+	free_irq(gpiod_to_irq(tosa_bat_jacket.gpiod_full), &tosa_bat_jacket);
 err_req_jacket:
-	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+	free_irq(gpiod_to_irq(tosa_bat_main.gpiod_full), &tosa_bat_main);
 err_req_main:
 	power_supply_unregister(tosa_bat_bu.psy);
 err_psy_reg_bu:
@@ -425,15 +473,14 @@ err_psy_reg_main:
 	/* see comment in tosa_bat_remove */
 	cancel_work_sync(&bat_work);
 
-	gpio_free_array(tosa_bat_gpios, ARRAY_SIZE(tosa_bat_gpios));
 	return ret;
 }
 
 static int tosa_bat_remove(struct platform_device *dev)
 {
-	free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
-	free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
-	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+	free_irq(gpiod_to_irq(jacket_detect), &tosa_bat_jacket);
+	free_irq(gpiod_to_irq(tosa_bat_jacket.gpiod_full), &tosa_bat_jacket);
+	free_irq(gpiod_to_irq(tosa_bat_main.gpiod_full), &tosa_bat_main);
 
 	power_supply_unregister(tosa_bat_bu.psy);
 	power_supply_unregister(tosa_bat_jacket.psy);
@@ -445,7 +492,6 @@ static int tosa_bat_remove(struct platform_device *dev)
 	 * unregistered now.
 	 */
 	cancel_work_sync(&bat_work);
-	gpio_free_array(tosa_bat_gpios, ARRAY_SIZE(tosa_bat_gpios));
 	return 0;
 }
 
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index cf8119b6d320..eeacf480cf36 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -16,8 +16,6 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 
-#include <mach/hardware.h>
-
 #include "rtc-sa1100.h"
 
 #define RTC_DEF_DIVIDER		(32768 - 1)
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index c5aae42673d3..86ccf5970bc1 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -14,6 +14,7 @@ source "drivers/soc/ixp4xx/Kconfig"
 source "drivers/soc/litex/Kconfig"
 source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/microchip/Kconfig"
+source "drivers/soc/pxa/Kconfig"
 source "drivers/soc/qcom/Kconfig"
 source "drivers/soc/renesas/Kconfig"
 source "drivers/soc/rockchip/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index e8228c4e5d18..919716e0e700 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_SOC_XWAY)		+= lantiq/
 obj-$(CONFIG_LITEX_SOC_CONTROLLER) += litex/
 obj-y				+= mediatek/
 obj-y				+= microchip/
+obj-y				+= pxa/
 obj-y				+= amlogic/
 obj-y				+= qcom/
 obj-y				+= renesas/
diff --git a/drivers/soc/pxa/Kconfig b/drivers/soc/pxa/Kconfig
new file mode 100644
index 000000000000..c5c265aa4f07
--- /dev/null
+++ b/drivers/soc/pxa/Kconfig
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config PLAT_PXA
+	bool
+
+config PXA_SSP
+	tristate
+	help
+	  Enable support for PXA2xx SSP ports
diff --git a/drivers/soc/pxa/Makefile b/drivers/soc/pxa/Makefile
new file mode 100644
index 000000000000..413deceddbdd
--- /dev/null
+++ b/drivers/soc/pxa/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_PXA3xx)		+= mfp.o
+obj-$(CONFIG_ARCH_MMP)		+= mfp.o
+
+obj-$(CONFIG_PXA_SSP)		+= ssp.o
diff --git a/drivers/soc/pxa/mfp.c b/drivers/soc/pxa/mfp.c
new file mode 100644
index 000000000000..6220ba321cfc
--- /dev/null
+++ b/drivers/soc/pxa/mfp.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/plat-pxa/mfp.c
+ *
+ *   Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <linux/soc/pxa/mfp.h>
+
+#define MFPR_SIZE	(PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL		(0x1 << 15)
+#define MFPR_PULLUP_EN		(0x1 << 14)
+#define MFPR_PULLDOWN_EN	(0x1 << 13)
+#define MFPR_SLEEP_SEL		(0x1 << 9)
+#define MFPR_SLEEP_OE_N		(0x1 << 7)
+#define MFPR_EDGE_CLEAR		(0x1 << 6)
+#define MFPR_EDGE_FALL_EN	(0x1 << 5)
+#define MFPR_EDGE_RISE_EN	(0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x)	((x) << 8)
+#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE		(0)
+#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFPR_LPM_INPUT		(0)
+#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK		(0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior,  the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition       pull_sel  pullup_en  pulldown_en
+ * MFPR_PULL_NONE       0         0        0
+ * MFPR_PULL_LOW        1         0        1
+ * MFPR_PULL_HIGH       1         1        0
+ * MFPR_PULL_BOTH       1         1        1
+ * MFPR_PULL_FLOAT	1         0        0
+ */
+#define MFPR_PULL_NONE		(0)
+#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_PULL_FLOAT		(MFPR_PULL_SEL)
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base;
+
+struct mfp_pin {
+	unsigned long	config;		/* -1 for not configured */
+	unsigned long	mfpr_off;	/* MFPRxx Register offset */
+	unsigned long	mfpr_run;	/* Run-Mode Register Value */
+	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
+};
+
+static struct mfp_pin mfp_table[MFP_PIN_MAX];
+
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+static const unsigned long mfpr_lpm[] = {
+	MFPR_LPM_INPUT,
+	MFPR_LPM_DRIVE_LOW,
+	MFPR_LPM_DRIVE_HIGH,
+	MFPR_LPM_PULL_LOW,
+	MFPR_LPM_PULL_HIGH,
+	MFPR_LPM_FLOAT,
+	MFPR_LPM_INPUT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+static const unsigned long mfpr_pull[] = {
+	MFPR_PULL_NONE,
+	MFPR_PULL_LOW,
+	MFPR_PULL_HIGH,
+	MFPR_PULL_BOTH,
+	MFPR_PULL_FLOAT,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+static const unsigned long mfpr_edge[] = {
+	MFPR_EDGE_NONE,
+	MFPR_EDGE_RISE,
+	MFPR_EDGE_FALL,
+	MFPR_EDGE_BOTH,
+};
+
+#define mfpr_readl(off)			\
+	__raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val)		\
+	__raw_writel(val, mfpr_mmio_base + (off))
+
+#define mfp_configured(p)	((p)->config != -1)
+
+/*
+ * perform a read-back of any valid MFPR register to make sure the
+ * previous writings are finished
+ */
+static unsigned long mfpr_off_readback;
+#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + mfpr_off_readback)
+
+static inline void __mfp_config_run(struct mfp_pin *p)
+{
+	if (mfp_configured(p))
+		mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
+
+static inline void __mfp_config_lpm(struct mfp_pin *p)
+{
+	if (mfp_configured(p)) {
+		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+		if (mfpr_clr != p->mfpr_run)
+			mfpr_writel(p->mfpr_off, mfpr_clr);
+		if (p->mfpr_lpm != mfpr_clr)
+			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+	}
+}
+
+void mfp_config(unsigned long *mfp_cfgs, int num)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	for (i = 0; i < num; i++, mfp_cfgs++) {
+		unsigned long tmp, c = *mfp_cfgs;
+		struct mfp_pin *p;
+		int pin, af, drv, lpm, edge, pull;
+
+		pin = MFP_PIN(c);
+		BUG_ON(pin >= MFP_PIN_MAX);
+		p = &mfp_table[pin];
+
+		af  = MFP_AF(c);
+		drv = MFP_DS(c);
+		lpm = MFP_LPM_STATE(c);
+		edge = MFP_LPM_EDGE(c);
+		pull = MFP_PULL(c);
+
+		/* run-mode pull settings will conflict with MFPR bits of
+		 * low power mode state,  calculate mfpr_run and mfpr_lpm
+		 * individually if pull != MFP_PULL_NONE
+		 */
+		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+		if (likely(pull == MFP_PULL_NONE)) {
+			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_lpm = p->mfpr_run;
+		} else {
+			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_run = tmp | mfpr_pull[pull];
+		}
+
+		p->config = c; __mfp_config_run(p);
+	}
+
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long mfp_read(int mfp)
+{
+	unsigned long val, flags;
+
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	val = mfpr_readl(mfp_table[mfp].mfpr_off);
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+	return val;
+}
+
+void mfp_write(int mfp, unsigned long val)
+{
+	unsigned long flags;
+
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	mfpr_writel(mfp_table[mfp].mfpr_off, val);
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init mfp_init_base(void __iomem *mfpr_base)
+{
+	int i;
+
+	/* initialize the table with default - unconfigured */
+	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+		mfp_table[i].config = -1;
+
+	mfpr_mmio_base = mfpr_base;
+}
+
+void __init mfp_init_addr(struct mfp_addr_map *map)
+{
+	struct mfp_addr_map *p;
+	unsigned long offset, flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	/* mfp offset for readback */
+	mfpr_off_readback = map[0].offset;
+
+	for (p = map; p->start != MFP_PIN_INVALID; p++) {
+		offset = p->offset;
+		i = p->start;
+
+		do {
+			mfp_table[i].mfpr_off = offset;
+			mfp_table[i].mfpr_run = 0;
+			mfp_table[i].mfpr_lpm = 0;
+			offset += 4; i++;
+		} while ((i <= p->end) && (p->end != -1));
+	}
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void mfp_config_lpm(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_lpm(p);
+}
+
+void mfp_config_run(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_run(p);
+}
diff --git a/drivers/soc/pxa/ssp.c b/drivers/soc/pxa/ssp.c
new file mode 100644
index 000000000000..563440315acd
--- /dev/null
+++ b/drivers/soc/pxa/ssp.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/mach-pxa/ssp.c
+ *
+ *  based on linux/arch/arm/mach-sa1100/ssp.c by Russell King
+ *
+ *  Copyright (C) 2003 Russell King.
+ *  Copyright (C) 2003 Wolfson Microelectronics PLC
+ *
+ *  PXA2xx SSP driver.  This provides the generic core for simple
+ *  IO-based SSP applications and allows easy port setup for DMA access.
+ *
+ *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <asm/irq.h>
+
+static DEFINE_MUTEX(ssp_lock);
+static LIST_HEAD(ssp_list);
+
+struct ssp_device *pxa_ssp_request(int port, const char *label)
+{
+	struct ssp_device *ssp = NULL;
+
+	mutex_lock(&ssp_lock);
+
+	list_for_each_entry(ssp, &ssp_list, node) {
+		if (ssp->port_id == port && ssp->use_count == 0) {
+			ssp->use_count++;
+			ssp->label = label;
+			break;
+		}
+	}
+
+	mutex_unlock(&ssp_lock);
+
+	if (&ssp->node == &ssp_list)
+		return NULL;
+
+	return ssp;
+}
+EXPORT_SYMBOL(pxa_ssp_request);
+
+struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,
+				      const char *label)
+{
+	struct ssp_device *ssp = NULL;
+
+	mutex_lock(&ssp_lock);
+
+	list_for_each_entry(ssp, &ssp_list, node) {
+		if (ssp->of_node == of_node && ssp->use_count == 0) {
+			ssp->use_count++;
+			ssp->label = label;
+			break;
+		}
+	}
+
+	mutex_unlock(&ssp_lock);
+
+	if (&ssp->node == &ssp_list)
+		return NULL;
+
+	return ssp;
+}
+EXPORT_SYMBOL(pxa_ssp_request_of);
+
+void pxa_ssp_free(struct ssp_device *ssp)
+{
+	mutex_lock(&ssp_lock);
+	if (ssp->use_count) {
+		ssp->use_count--;
+		ssp->label = NULL;
+	} else
+		dev_err(ssp->dev, "device already free\n");
+	mutex_unlock(&ssp_lock);
+}
+EXPORT_SYMBOL(pxa_ssp_free);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_ssp_of_ids[] = {
+	{ .compatible = "mrvl,pxa25x-ssp",	.data = (void *) PXA25x_SSP },
+	{ .compatible = "mvrl,pxa25x-nssp",	.data = (void *) PXA25x_NSSP },
+	{ .compatible = "mrvl,pxa27x-ssp",	.data = (void *) PXA27x_SSP },
+	{ .compatible = "mrvl,pxa3xx-ssp",	.data = (void *) PXA3xx_SSP },
+	{ .compatible = "mvrl,pxa168-ssp",	.data = (void *) PXA168_SSP },
+	{ .compatible = "mrvl,pxa910-ssp",	.data = (void *) PXA910_SSP },
+	{ .compatible = "mrvl,ce4100-ssp",	.data = (void *) CE4100_SSP },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
+#endif
+
+static int pxa_ssp_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct ssp_device *ssp;
+	struct device *dev = &pdev->dev;
+
+	ssp = devm_kzalloc(dev, sizeof(struct ssp_device), GFP_KERNEL);
+	if (ssp == NULL)
+		return -ENOMEM;
+
+	ssp->dev = dev;
+
+	ssp->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ssp->clk))
+		return PTR_ERR(ssp->clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "no memory resource defined\n");
+		return -ENODEV;
+	}
+
+	res = devm_request_mem_region(dev, res->start, resource_size(res),
+				      pdev->name);
+	if (res == NULL) {
+		dev_err(dev, "failed to request memory resource\n");
+		return -EBUSY;
+	}
+
+	ssp->phys_base = res->start;
+
+	ssp->mmio_base = devm_ioremap(dev, res->start, resource_size(res));
+	if (ssp->mmio_base == NULL) {
+		dev_err(dev, "failed to ioremap() registers\n");
+		return -ENODEV;
+	}
+
+	ssp->irq = platform_get_irq(pdev, 0);
+	if (ssp->irq < 0) {
+		dev_err(dev, "no IRQ resource defined\n");
+		return -ENODEV;
+	}
+
+	if (dev->of_node) {
+		const struct of_device_id *id =
+			of_match_device(of_match_ptr(pxa_ssp_of_ids), dev);
+		ssp->type = (int) id->data;
+	} else {
+		const struct platform_device_id *id =
+			platform_get_device_id(pdev);
+		ssp->type = (int) id->driver_data;
+
+		/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
+		 * starts from 0, do a translation here
+		 */
+		ssp->port_id = pdev->id + 1;
+	}
+
+	ssp->use_count = 0;
+	ssp->of_node = dev->of_node;
+
+	mutex_lock(&ssp_lock);
+	list_add(&ssp->node, &ssp_list);
+	mutex_unlock(&ssp_lock);
+
+	platform_set_drvdata(pdev, ssp);
+
+	return 0;
+}
+
+static int pxa_ssp_remove(struct platform_device *pdev)
+{
+	struct ssp_device *ssp;
+
+	ssp = platform_get_drvdata(pdev);
+	if (ssp == NULL)
+		return -ENODEV;
+
+	mutex_lock(&ssp_lock);
+	list_del(&ssp->node);
+	mutex_unlock(&ssp_lock);
+
+	return 0;
+}
+
+static const struct platform_device_id ssp_id_table[] = {
+	{ "pxa25x-ssp",		PXA25x_SSP },
+	{ "pxa25x-nssp",	PXA25x_NSSP },
+	{ "pxa27x-ssp",		PXA27x_SSP },
+	{ "pxa3xx-ssp",		PXA3xx_SSP },
+	{ "pxa168-ssp",		PXA168_SSP },
+	{ "pxa910-ssp",		PXA910_SSP },
+	{ },
+};
+
+static struct platform_driver pxa_ssp_driver = {
+	.probe		= pxa_ssp_probe,
+	.remove		= pxa_ssp_remove,
+	.driver		= {
+		.name		= "pxa2xx-ssp",
+		.of_match_table	= of_match_ptr(pxa_ssp_of_ids),
+	},
+	.id_table	= ssp_id_table,
+};
+
+static int __init pxa_ssp_init(void)
+{
+	return platform_driver_register(&pxa_ssp_driver);
+}
+
+static void __exit pxa_ssp_exit(void)
+{
+	platform_driver_unregister(&pxa_ssp_driver);
+}
+
+arch_initcall(pxa_ssp_init);
+module_exit(pxa_ssp_exit);
+
+MODULE_DESCRIPTION("PXA SSP driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
index 6c414c99d01c..c593fc383481 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.c
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -44,10 +44,6 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 
-#ifdef CONFIG_ARCH_LUBBOCK
-#include <mach/lubbock.h>
-#endif
-
 #define UDCCR	 0x0000 /* UDC Control Register */
 #define UDC_RES1 0x0004 /* UDC Undocumented - Reserved1 */
 #define UDC_RES2 0x0008 /* UDC Undocumented - Reserved2 */
@@ -1578,18 +1574,15 @@ lubbock_vbus_irq(int irq, void *_dev)
 	int			vbus;
 
 	dev->stats.irqs++;
-	switch (irq) {
-	case LUBBOCK_USB_IRQ:
+	if (irq == dev->usb_irq) {
 		vbus = 1;
-		disable_irq(LUBBOCK_USB_IRQ);
-		enable_irq(LUBBOCK_USB_DISC_IRQ);
-		break;
-	case LUBBOCK_USB_DISC_IRQ:
+		disable_irq(dev->usb_irq);
+		enable_irq(dev->usb_disc_irq);
+	} else if (irq == dev->usb_disc_irq) {
 		vbus = 0;
-		disable_irq(LUBBOCK_USB_DISC_IRQ);
-		enable_irq(LUBBOCK_USB_IRQ);
-		break;
-	default:
+		disable_irq(dev->usb_disc_irq);
+		enable_irq(dev->usb_irq);
+	} else {
 		return IRQ_NONE;
 	}
 
@@ -2422,20 +2415,28 @@ static int pxa25x_udc_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_ARCH_LUBBOCK
 	if (machine_is_lubbock()) {
-		retval = devm_request_irq(&pdev->dev, LUBBOCK_USB_DISC_IRQ,
+		dev->usb_irq = platform_get_irq(pdev, 1);
+		if (dev->usb_irq < 0)
+			return dev->usb_irq;
+
+		dev->usb_disc_irq = platform_get_irq(pdev, 2);
+		if (dev->usb_disc_irq < 0)
+			return dev->usb_disc_irq;
+
+		retval = devm_request_irq(&pdev->dev, dev->usb_disc_irq,
 					  lubbock_vbus_irq, 0, driver_name,
 					  dev);
 		if (retval != 0) {
 			pr_err("%s: can't get irq %i, err %d\n",
-				driver_name, LUBBOCK_USB_DISC_IRQ, retval);
+				driver_name, dev->usb_disc_irq, retval);
 			goto err;
 		}
-		retval = devm_request_irq(&pdev->dev, LUBBOCK_USB_IRQ,
+		retval = devm_request_irq(&pdev->dev, dev->usb_irq,
 					  lubbock_vbus_irq, 0, driver_name,
 					  dev);
 		if (retval != 0) {
 			pr_err("%s: can't get irq %i, err %d\n",
-				driver_name, LUBBOCK_USB_IRQ, retval);
+				driver_name, dev->usb_irq, retval);
 			goto err;
 		}
 	} else
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.h b/drivers/usb/gadget/udc/pxa25x_udc.h
index aa4b68fd9fc0..6ab6047edc83 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.h
+++ b/drivers/usb/gadget/udc/pxa25x_udc.h
@@ -117,16 +117,13 @@ struct pxa25x_udc {
 	u64					dma_mask;
 	struct pxa25x_ep			ep [PXA_UDC_NUM_ENDPOINTS];
 	void __iomem				*regs;
+	int					usb_irq;
+	int					usb_disc_irq;
 };
 #define to_pxa25x(g)	(container_of((g), struct pxa25x_udc, gadget))
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef CONFIG_ARCH_LUBBOCK
-#include <mach/lubbock.h>
-/* lubbock can also report usb connect/disconnect irqs */
-#endif
-
 static struct pxa25x_udc *the_controller;
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 54aa5c77e549..ab4f610a0140 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -36,8 +36,7 @@
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <linux/usb/otg.h>
-
-#include <mach/hardware.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include "ohci.h"
 
diff --git a/drivers/video/fbdev/pxa3xx-regs.h b/drivers/video/fbdev/pxa3xx-regs.h
new file mode 100644
index 000000000000..6a96610ef9b5
--- /dev/null
+++ b/drivers/video/fbdev/pxa3xx-regs.h
@@ -0,0 +1,180 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_REGS_LCD_H
+#define __ASM_ARCH_REGS_LCD_H
+
+/*
+ * LCD Controller Registers and Bits Definitions
+ */
+#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
+#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
+#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
+#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
+#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
+#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
+#define LCSR		(0x038)	/* LCD Controller Status Register 0 */
+#define LCSR1		(0x034)	/* LCD Controller Status Register 1 */
+#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
+#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
+#define TMEDCR		(0x044)	/* TMED Control Register */
+
+#define FBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
+#define FBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
+#define FBR2		(0x028) /* DMA Channel 2 Frame Branch Register */
+#define FBR3		(0x02C) /* DMA Channel 2 Frame Branch Register */
+#define FBR4		(0x030) /* DMA Channel 2 Frame Branch Register */
+#define FBR5		(0x110) /* DMA Channel 2 Frame Branch Register */
+#define FBR6		(0x114) /* DMA Channel 2 Frame Branch Register */
+
+#define OVL1C1		(0x050)	/* Overlay 1 Control Register 1 */
+#define OVL1C2		(0x060)	/* Overlay 1 Control Register 2 */
+#define OVL2C1		(0x070)	/* Overlay 2 Control Register 1 */
+#define OVL2C2		(0x080)	/* Overlay 2 Control Register 2 */
+
+#define CMDCR		(0x100)	/* Command Control Register */
+#define PRSR		(0x104)	/* Panel Read Status Register */
+
+#define LCCR3_BPP(x)	((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0))
+
+#define LCCR3_PDFOR_0	(0 << 30)
+#define LCCR3_PDFOR_1	(1 << 30)
+#define LCCR3_PDFOR_2	(2 << 30)
+#define LCCR3_PDFOR_3	(3 << 30)
+
+#define LCCR4_PAL_FOR_0	(0 << 15)
+#define LCCR4_PAL_FOR_1	(1 << 15)
+#define LCCR4_PAL_FOR_2	(2 << 15)
+#define LCCR4_PAL_FOR_3	(3 << 15)
+#define LCCR4_PAL_FOR_MASK	(3 << 15)
+
+#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
+#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
+#define FDADR2		(0x220)	/* DMA Channel 2 Frame Descriptor Address Register */
+#define FDADR3		(0x230)	/* DMA Channel 3 Frame Descriptor Address Register */
+#define FDADR4		(0x240)	/* DMA Channel 4 Frame Descriptor Address Register */
+#define FDADR5		(0x250)	/* DMA Channel 5 Frame Descriptor Address Register */
+#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
+
+#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
+#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
+#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
+#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
+#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
+#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
+#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
+
+#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
+#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
+#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
+#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
+#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
+#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
+#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
+#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
+#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
+#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
+#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
+#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
+#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
+#define LCCR0_PDD_S	12
+#define LCCR0_BM	(1 << 20)	/* Branch mask */
+#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
+#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
+#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
+#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
+#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
+#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
+
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+#define FShft(Field)	((Field) & 0x0000FFFF)
+
+#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
+#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
+#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
+#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
+#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
+#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
+#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S	16
+#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
+#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
+#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
+
+#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
+#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
+#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
+
+#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
+#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
+
+#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
+#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
+#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
+
+#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
+#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
+
+#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
+#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
+#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
+#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
+
+#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
+#define LCSR_SOF	(1 << 1)	/* Start of frame */
+#define LCSR_BER	(1 << 2)	/* Bus error */
+#define LCSR_ABC	(1 << 3)	/* AC Bias count */
+#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
+#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
+#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
+#define LCSR_QD		(1 << 7)	/* quick disable */
+#define LCSR_EOF	(1 << 8)	/* end of frame */
+#define LCSR_BS		(1 << 9)	/* branch status */
+#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
+#define LCSR_RD_ST	(1 << 11)	/* read status */
+#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
+
+#define LCSR1_IU(x)	(1 << ((x) + 23)) /* Input FIFO underrun */
+#define LCSR1_BS(x)	(1 << ((x) + 15)) /* Branch Status */
+#define LCSR1_EOF(x)	(1 << ((x) + 7))  /* End of Frame Status */
+#define LCSR1_SOF(x)	(1 << ((x) - 1))  /* Start of Frame Status */
+
+#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
+
+/* overlay control registers */
+#define OVLxC1_PPL(x)	((((x) - 1) & 0x3ff) << 0)	/* Pixels Per Line */
+#define OVLxC1_LPO(x)	((((x) - 1) & 0x3ff) << 10)	/* Number of Lines */
+#define OVLxC1_BPP(x)	(((x) & 0xf) << 20)	/* Bits Per Pixel */
+#define OVLxC1_OEN	(1 << 31)		/* Enable bit for Overlay */
+#define OVLxC2_XPOS(x)	(((x) & 0x3ff) << 0)	/* Horizontal Position */
+#define OVLxC2_YPOS(x)	(((x) & 0x3ff) << 10)	/* Vertical Position */
+#define OVL2C2_PFOR(x)	(((x) & 0x7) << 20)	/* Pixel Format */
+
+/* smartpanel related */
+#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
+#define PRSR_A0		(1 << 8)	/* Read Data Source */
+#define PRSR_ST_OK	(1 << 9)	/* Status OK */
+#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
+
+#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index 8ad91c251fe6..66cfc3e9d3cf 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -57,14 +57,13 @@
 #include <linux/console.h>
 #include <linux/of_graph.h>
 #include <linux/regulator/consumer.h>
+#include <linux/soc/pxa/cpu.h>
 #include <video/of_display_timing.h>
 #include <video/videomode.h>
 
-#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
-#include <mach/bitfield.h>
 #include <linux/platform_data/video-pxafb.h>
 
 /*
@@ -73,6 +72,7 @@
 #define DEBUG_VAR 1
 
 #include "pxafb.h"
+#include "pxa3xx-regs.h"
 
 /* Bits which should not be set in machine configuration structures */
 #define LCCR0_INVALID_CONFIG_MASK	(LCCR0_OUM | LCCR0_BM | LCCR0_QDM |\
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index 27846c6bdfb0..2d0a06a158a8 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -22,6 +22,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
+#include <linux/platform_device.h>
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/init.h>
@@ -30,17 +31,42 @@
 #include <linux/uaccess.h>
 #include <linux/timex.h>
 
-#ifdef CONFIG_ARCH_PXA
-#include <mach/regs-ost.h>
-#endif
+#define REG_OSMR0  	0x0000  /* OS timer Match Reg. 0 */
+#define REG_OSMR1  	0x0004  /* OS timer Match Reg. 1 */
+#define REG_OSMR2  	0x0008  /* OS timer Match Reg. 2 */
+#define REG_OSMR3  	0x000c  /* OS timer Match Reg. 3 */
+#define REG_OSCR   	0x0010  /* OS timer Counter Reg. */
+#define REG_OSSR   	0x0014  /* OS timer Status Reg. */
+#define REG_OWER   	0x0018  /* OS timer Watch-dog Enable Reg. */
+#define REG_OIER  	0x001C  /* OS timer Interrupt Enable Reg. */
 
-#include <mach/reset.h>
-#include <mach/hardware.h>
+#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
+#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
+#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
+#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
+
+#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
+
+#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
+#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
+#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
+#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
 
 static unsigned long oscr_freq;
 static unsigned long sa1100wdt_users;
 static unsigned int pre_margin;
 static int boot_status;
+static void __iomem *reg_base;
+
+static inline void sa1100_wr(u32 val, u32 offset)
+{
+	writel_relaxed(val, reg_base + offset);
+}
+
+static inline u32 sa1100_rd(u32 offset)
+{
+	return readl_relaxed(reg_base + offset);
+}
 
 /*
  *	Allow only one person to hold it open
@@ -51,10 +77,10 @@ static int sa1100dog_open(struct inode *inode, struct file *file)
 		return -EBUSY;
 
 	/* Activate SA1100 Watchdog timer */
-	writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
-	writel_relaxed(OSSR_M3, OSSR);
-	writel_relaxed(OWER_WME, OWER);
-	writel_relaxed(readl_relaxed(OIER) | OIER_E3, OIER);
+	sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3);
+	sa1100_wr(OSSR_M3, REG_OSSR);
+	sa1100_wr(OWER_WME, REG_OWER);
+	sa1100_wr(sa1100_rd(REG_OIER) | OIER_E3, REG_OIER);
 	return stream_open(inode, file);
 }
 
@@ -62,7 +88,7 @@ static int sa1100dog_open(struct inode *inode, struct file *file)
  * The watchdog cannot be disabled.
  *
  * Previous comments suggested that turning off the interrupt by
- * clearing OIER[E3] would prevent the watchdog timing out but this
+ * clearing REG_OIER[E3] would prevent the watchdog timing out but this
  * does not appear to be true (at least on the PXA255).
  */
 static int sa1100dog_release(struct inode *inode, struct file *file)
@@ -77,7 +103,7 @@ static ssize_t sa1100dog_write(struct file *file, const char __user *data,
 {
 	if (len)
 		/* Refresh OSMR3 timer. */
-		writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
+		sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3);
 	return len;
 }
 
@@ -111,7 +137,7 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case WDIOC_KEEPALIVE:
-		writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
+		sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3);
 		ret = 0;
 		break;
 
@@ -126,7 +152,7 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
 		}
 
 		pre_margin = oscr_freq * time;
-		writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
+		sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3);
 		fallthrough;
 
 	case WDIOC_GETTIMEOUT:
@@ -152,12 +178,22 @@ static struct miscdevice sa1100dog_miscdev = {
 	.fops		= &sa1100dog_fops,
 };
 
-static int margin __initdata = 60;		/* (secs) Default is 1 minute */
+static int margin = 60;		/* (secs) Default is 1 minute */
 static struct clk *clk;
 
-static int __init sa1100dog_init(void)
+static int sa1100dog_probe(struct platform_device *pdev)
 {
 	int ret;
+	int *platform_data;
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+	reg_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	ret = PTR_ERR_OR_ZERO(reg_base);
+	if (ret)
+		return ret;
 
 	clk = clk_get(NULL, "OSTIMER0");
 	if (IS_ERR(clk)) {
@@ -175,13 +211,9 @@ static int __init sa1100dog_init(void)
 
 	oscr_freq = clk_get_rate(clk);
 
-	/*
-	 * Read the reset status, and save it for later.  If
-	 * we suspend, RCSR will be cleared, and the watchdog
-	 * reset reason will be lost.
-	 */
-	boot_status = (reset_status & RESET_STATUS_WATCHDOG) ?
-				WDIOF_CARDRESET : 0;
+	platform_data = pdev->dev.platform_data;
+	if (platform_data && *platform_data)
+		boot_status = WDIOF_CARDRESET;
 	pre_margin = oscr_freq * margin;
 
 	ret = misc_register(&sa1100dog_miscdev);
@@ -197,15 +229,21 @@ err:
 	return ret;
 }
 
-static void __exit sa1100dog_exit(void)
+static int sa1100dog_remove(struct platform_device *pdev)
 {
 	misc_deregister(&sa1100dog_miscdev);
 	clk_disable_unprepare(clk);
 	clk_put(clk);
+
+	return 0;
 }
 
-module_init(sa1100dog_init);
-module_exit(sa1100dog_exit);
+struct platform_driver sa1100dog_driver = {
+	.driver.name = "sa1100_wdt",
+	.probe	  = sa1100dog_probe,
+	.remove	  = sa1100dog_remove,
+};
+module_platform_driver(sa1100dog_driver);
 
 MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");
 MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");