Merge tag 'iio-for-5.5b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Second set of IIO + counter new device support, features etc for the 5.5 cycle.

Note two merge commits in here, both for immutable branches based
of 5.4-rc1.
1. Ti eqep driver because of some file moves in precursor patches.
   I suspect no one else will pull this one.
2. ab8500 refactor as changes in power supply, hwmon and mfd trees.
   This may come via numerous trees as well as IIO.

Counter subsystem related
* ti eqep
  - New device support with bindings.
  - Includes prior file move to reflect more general use of ti-pwmss.
* Counter core
  - simplify count_read and count_write callbacks + document change.
  - fix a typo in docs.

Various subsystems related
* AB8500
  - ab8500_btemp driver converted to be an IIO consumer driver.
  - ab8500_charger driver converted to be an IIO consumer driver.
  - ab8500_fg fuel gauge driver converted to be an IIO consumer driver.
  - ab8500 hwmon driver converted to be an IIO consumer driver.
  - mfd bindings augmented with the adc channels to make the above work.
  - drop original mfd driver.

New device support
* ab8500
  - new ADC driver used by the above other subystems via the IIO consumer
    interface.
* adux1020 photometric sensor
  - new driver and dt bindings.
* fxos877cq
  - new driver for this simple(ish) IMU with DT bindings.
* intel_mrfld_adc
  -  new driver for the ADC found on Intel Merrifield platforms.
* ltc2983
  - new driver for this multi-sensor type temperature interface.
    Includes complex DT bindings.
* max1027
  - support for 12 bit devices, max1227, max1229 and max1231 + add to trivial
    bindings.
* st_lsm6dsx
  - support for the LSM6DS0 6 axis MEMs sensor.
    Note different from the LSM6DSO which the driver already supports *sigh*
  - support for the LSM6DSRX 6 axis MEMs sensor.

Features and cleanups
* ad7303
  - replace use of core mlock with a local lock with cleanly defined scope.
* ad9834
  - add a check for devm_clk_get failing.
* at91-sama5d2
  - tidy up a 0 as NULL warning.
* bmp280
  - endian type tidy ups.
  - use bulk regulator ops for a small reduction in code.
  - use devm_add_action... to simplify error path handling.
* exynos
  - drop stray semicolon.
  - use devm_platform_ioremap_resource to reduce boilerplate.
* hx711
  - various tricks to improve the frequency of read out possible.
* max1027
  - debugfs support.
  - make interrupts optional.
  - reset at probe to get clean state.
  - refactors to allow addition of new device support.
* maxim thermocouple
  - drop an unneeded semicolon.
* mb1232
  - yaml binding conversion.
* mcp320x
  - tidy up an endian types in cast warning.
* meson_saradc
  - use devm_platform_ioremap_resource to reduce boilerplate.
* mpu3050
  - make a poison value explicity big endian to supress a warning.
* pulsedlight v2
  - endian type tidy ups.
* sgp30
  - drop an excess semicolon.
* sps30
  - make truncation explicit with masking to clean up a warning.
* st sensors
  - drop gpio include as none of these support gpios.
* st_lsm6dsx
  - tidy up some alignment issues.
  - refactors to allow addition of new device support.
    * allow varients of irq related reg definitions.
    * avoid accessing active-low, open-drain regs if not provided.
    * allow varients of bdu/boot and reset regs.
    * allow for enabling or disabling wakeup sources through platform
      data (seems someone still uses this).
  - enable wake-up events for LSM6DS0
  - use the drdy mask to avoid some invalid samples during initial start
    of sensor.
  - Add support to trim the timestamp.
* stm32_adc
  - kernel-doc fixes.
* stm32_dac
  - power management support.
* stmpe-adc
  - Fix endian type of local variable.
* twl4030
  - use false / true instead of 0 / 1 for booleans.
* xilinx-xadc
  - use devm_platform_ioremap_resouce to reduce boilerplate.
* zpa2326
  - reorganise buffer handling setup to be more consistent.

Fixes (mostly recent additions)
* cpcap-adc
  - Fix mising IRQF_ONESHOT that would cause warnings to be printed.
* st_lsm6dsx
  - Sanity check the read_fifo pointer is set.
  - use locked read and update functions to prevent some races.
  - avoid accessing enable_reg if not provided.
  - take a lock to prevent a race in updating the config.
  - kernel-doc fixes.
  - document wakeup-source property in dt binding.
  - fix lsm9ds1 gyro gain definitions.

* tag 'iio-for-5.5b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits)
  dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings
  iio: imu: st_lsm6dsx: add support to LSM6DSRX
  iio: st: Drop GPIO include
  iio: adc: hx711: optimize performance in read cycle
  iio: adc: stm32-adc: fix kernel-doc warnings
  iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
  iio: chemical: sgp30: drop excess semicolon
  iio: adc: twl4030: Use false / true instead of 0 / 1 with booleans
  dt-bindings: iio: Add ltc2983 documentation
  iio: temperature: Add support for LTC2983
  iio: pressure: bmp280: use devm action and remove labels from probe
  iio: pressure: bmp280: use bulk regulator ops
  iio: imu: Add support for the FXOS8700 IMU
  dt-bindings: iio: imu: add fxos8700 imu binding
  staging: iio: ad9834: add a check for devm_clk_get
  iio: adc: xilinx-xadc: use devm_platform_ioremap_resource
  iio: temp: maxim thermocouple: Drop unneeded semi colon.
  iio: adc: cpcap-adc: Fix missing IRQF_ONESHOT as only threaded handler.
  iio: adc: meson_saradc: use devm_platform_ioremap_resource
  iio: adc: exynos: use devm_platform_ioremap_resource
  ...

75 files changed, 6402 insertions, 2469 deletions

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 6b331061d34b..97ab5ad171d4 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -150,6 +150,15 @@ config TEGRA_GMI
 	  Driver for the Tegra Generic Memory Interface bus which can be used
 	  to attach devices such as NOR, UART, FPGA and more.
 
+config  TI_PWMSS
+	bool
+	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM || TI_EQEP)
+	help
+	  PWM Subsystem driver support for AM33xx SOC.
+
+	  PWM submodules require PWM config space access from submodule
+	  drivers and require common parent driver support.
+
 config TI_SYSC
 	bool "TI sysc interconnect target module driver"
 	depends on ARCH_OMAP2PLUS
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 16b43d3468c6..1320bcf9fa9d 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
 obj-$(CONFIG_SIMPLE_PM_BUS)	+= simple-pm-bus.o
 obj-$(CONFIG_TEGRA_ACONNECT)	+= tegra-aconnect.o
 obj-$(CONFIG_TEGRA_GMI)		+= tegra-gmi.o
+obj-$(CONFIG_TI_PWMSS)		+= ti-pwmss.o
 obj-$(CONFIG_TI_SYSC)		+= ti-sysc.o
 obj-$(CONFIG_TS_NBUS)		+= ts-nbus.o
 obj-$(CONFIG_UNIPHIER_SYSTEM_BUS)	+= uniphier-system-bus.o
diff --git a/drivers/pwm/pwm-tipwmss.c b/drivers/bus/ti-pwmss.c
index e9c26c94251b..e9c26c94251b 100644
--- a/drivers/pwm/pwm-tipwmss.c
+++ b/drivers/bus/ti-pwmss.c
diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
index 00b113f4b958..17e67a84777d 100644
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -562,11 +562,10 @@ static const struct iio_chan_spec quad8_channels[] = {
 };
 
 static int quad8_signal_read(struct counter_device *counter,
-	struct counter_signal *signal, struct counter_signal_read_value *val)
+	struct counter_signal *signal, enum counter_signal_value *val)
 {
 	const struct quad8_iio *const priv = counter->priv;
 	unsigned int state;
-	enum counter_signal_level level;
 
 	/* Only Index signal levels can be read */
 	if (signal->id < 16)
@@ -575,22 +574,19 @@ static int quad8_signal_read(struct counter_device *counter,
 	state = inb(priv->base + QUAD8_REG_INDEX_INPUT_LEVELS)
 		& BIT(signal->id - 16);
 
-	level = (state) ? COUNTER_SIGNAL_LEVEL_HIGH : COUNTER_SIGNAL_LEVEL_LOW;
-
-	counter_signal_read_value_set(val, COUNTER_SIGNAL_LEVEL, &level);
+	*val = (state) ? COUNTER_SIGNAL_HIGH : COUNTER_SIGNAL_LOW;
 
 	return 0;
 }
 
 static int quad8_count_read(struct counter_device *counter,
-	struct counter_count *count, struct counter_count_read_value *val)
+	struct counter_count *count, unsigned long *val)
 {
 	const struct quad8_iio *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
 	unsigned int flags;
 	unsigned int borrow;
 	unsigned int carry;
-	unsigned long position;
 	int i;
 
 	flags = inb(base_offset + 1);
@@ -598,36 +594,27 @@ static int quad8_count_read(struct counter_device *counter,
 	carry = !!(flags & QUAD8_FLAG_CT);
 
 	/* Borrow XOR Carry effectively doubles count range */
-	position = (unsigned long)(borrow ^ carry) << 24;
+	*val = (unsigned long)(borrow ^ carry) << 24;
 
 	/* Reset Byte Pointer; transfer Counter to Output Latch */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
 	     base_offset + 1);
 
 	for (i = 0; i < 3; i++)
-		position |= (unsigned long)inb(base_offset) << (8 * i);
-
-	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &position);
+		*val |= (unsigned long)inb(base_offset) << (8 * i);
 
 	return 0;
 }
 
 static int quad8_count_write(struct counter_device *counter,
-	struct counter_count *count, struct counter_count_write_value *val)
+	struct counter_count *count, unsigned long val)
 {
 	const struct quad8_iio *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
-	int err;
-	unsigned long position;
 	int i;
 
-	err = counter_count_write_value_get(&position, COUNTER_COUNT_POSITION,
-					    val);
-	if (err)
-		return err;
-
 	/* Only 24-bit values are supported */
-	if (position > 0xFFFFFF)
+	if (val > 0xFFFFFF)
 		return -EINVAL;
 
 	/* Reset Byte Pointer */
@@ -635,7 +622,7 @@ static int quad8_count_write(struct counter_device *counter,
 
 	/* Counter can only be set via Preset Register */
 	for (i = 0; i < 3; i++)
-		outb(position >> (8 * i), base_offset);
+		outb(val >> (8 * i), base_offset);
 
 	/* Transfer Preset Register to Counter */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_PRESET_CNTR, base_offset + 1);
@@ -644,9 +631,9 @@ static int quad8_count_write(struct counter_device *counter,
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 
 	/* Set Preset Register back to original value */
-	position = priv->preset[count->id];
+	val = priv->preset[count->id];
 	for (i = 0; i < 3; i++)
-		outb(position >> (8 * i), base_offset);
+		outb(val >> (8 * i), base_offset);
 
 	/* Reset Borrow, Carry, Compare, and Sign flags */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_FLAGS, base_offset + 1);
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
index 2967d0a9ff91..c80fa76bb531 100644
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@@ -49,6 +49,17 @@ config STM32_LPTIMER_CNT
 	  To compile this driver as a module, choose M here: the
 	  module will be called stm32-lptimer-cnt.
 
+config TI_EQEP
+	tristate "TI eQEP counter driver"
+	depends on (SOC_AM33XX || COMPILE_TEST)
+	select REGMAP_MMIO
+	help
+	  Select this option to enable the Texas Instruments Enhanced Quadrature
+	  Encoder Pulse (eQEP) counter driver.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ti-eqep.
+
 config FTM_QUADDEC
 	tristate "Flex Timer Module Quadrature decoder driver"
 	depends on HAS_IOMEM && OF
diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile
index 40d35522937d..55142d1f4c43 100644
--- a/drivers/counter/Makefile
+++ b/drivers/counter/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_COUNTER) += counter.o
 obj-$(CONFIG_104_QUAD_8)	+= 104-quad-8.o
 obj-$(CONFIG_STM32_TIMER_CNT)	+= stm32-timer-cnt.o
 obj-$(CONFIG_STM32_LPTIMER_CNT)	+= stm32-lptimer-cnt.o
+obj-$(CONFIG_TI_EQEP)		+= ti-eqep.o
 obj-$(CONFIG_FTM_QUADDEC)	+= ftm-quaddec.o
diff --git a/drivers/counter/counter.c b/drivers/counter/counter.c
index 106bc7180cd8..6a683d086008 100644
--- a/drivers/counter/counter.c
+++ b/drivers/counter/counter.c
@@ -220,86 +220,6 @@ ssize_t counter_device_enum_available_read(struct counter_device *counter,
 }
 EXPORT_SYMBOL_GPL(counter_device_enum_available_read);
 
-static const char *const counter_signal_level_str[] = {
-	[COUNTER_SIGNAL_LEVEL_LOW] = "low",
-	[COUNTER_SIGNAL_LEVEL_HIGH] = "high"
-};
-
-/**
- * counter_signal_read_value_set - set counter_signal_read_value data
- * @val:	counter_signal_read_value structure to set
- * @type:	property Signal data represents
- * @data:	Signal data
- *
- * This function sets an opaque counter_signal_read_value structure with the
- * provided Signal data.
- */
-void counter_signal_read_value_set(struct counter_signal_read_value *const val,
-				   const enum counter_signal_value_type type,
-				   void *const data)
-{
-	if (type == COUNTER_SIGNAL_LEVEL)
-		val->len = sprintf(val->buf, "%s\n",
-				   counter_signal_level_str[*(enum counter_signal_level *)data]);
-	else
-		val->len = 0;
-}
-EXPORT_SYMBOL_GPL(counter_signal_read_value_set);
-
-/**
- * counter_count_read_value_set - set counter_count_read_value data
- * @val:	counter_count_read_value structure to set
- * @type:	property Count data represents
- * @data:	Count data
- *
- * This function sets an opaque counter_count_read_value structure with the
- * provided Count data.
- */
-void counter_count_read_value_set(struct counter_count_read_value *const val,
-				  const enum counter_count_value_type type,
-				  void *const data)
-{
-	switch (type) {
-	case COUNTER_COUNT_POSITION:
-		val->len = sprintf(val->buf, "%lu\n", *(unsigned long *)data);
-		break;
-	default:
-		val->len = 0;
-	}
-}
-EXPORT_SYMBOL_GPL(counter_count_read_value_set);
-
-/**
- * counter_count_write_value_get - get counter_count_write_value data
- * @data:	Count data
- * @type:	property Count data represents
- * @val:	counter_count_write_value structure containing data
- *
- * This function extracts Count data from the provided opaque
- * counter_count_write_value structure and stores it at the address provided by
- * @data.
- *
- * RETURNS:
- * 0 on success, negative error number on failure.
- */
-int counter_count_write_value_get(void *const data,
-				  const enum counter_count_value_type type,
-				  const struct counter_count_write_value *const val)
-{
-	int err;
-
-	switch (type) {
-	case COUNTER_COUNT_POSITION:
-		err = kstrtoul(val->buf, 0, data);
-		if (err)
-			return err;
-		break;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(counter_count_write_value_get);
-
 struct counter_attr_parm {
 	struct counter_device_attr_group *group;
 	const char *prefix;
@@ -369,6 +289,11 @@ struct counter_signal_unit {
 	struct counter_signal *signal;
 };
 
+static const char *const counter_signal_value_str[] = {
+	[COUNTER_SIGNAL_LOW] = "low",
+	[COUNTER_SIGNAL_HIGH] = "high"
+};
+
 static ssize_t counter_signal_show(struct device *dev,
 				   struct device_attribute *attr, char *buf)
 {
@@ -377,13 +302,13 @@ static ssize_t counter_signal_show(struct device *dev,
 	const struct counter_signal_unit *const component = devattr->component;
 	struct counter_signal *const signal = component->signal;
 	int err;
-	struct counter_signal_read_value val = { .buf = buf };
+	enum counter_signal_value val;
 
 	err = counter->ops->signal_read(counter, signal, &val);
 	if (err)
 		return err;
 
-	return val.len;
+	return sprintf(buf, "%s\n", counter_signal_value_str[val]);
 }
 
 struct counter_name_unit {
@@ -788,13 +713,13 @@ static ssize_t counter_count_show(struct device *dev,
 	const struct counter_count_unit *const component = devattr->component;
 	struct counter_count *const count = component->count;
 	int err;
-	struct counter_count_read_value val = { .buf = buf };
+	unsigned long val;
 
 	err = counter->ops->count_read(counter, count, &val);
 	if (err)
 		return err;
 
-	return val.len;
+	return sprintf(buf, "%lu\n", val);
 }
 
 static ssize_t counter_count_store(struct device *dev,
@@ -806,9 +731,13 @@ static ssize_t counter_count_store(struct device *dev,
 	const struct counter_count_unit *const component = devattr->component;
 	struct counter_count *const count = component->count;
 	int err;
-	struct counter_count_write_value val = { .buf = buf };
+	unsigned long val;
+
+	err = kstrtoul(buf, 0, &val);
+	if (err)
+		return err;
 
-	err = counter->ops->count_write(counter, count, &val);
+	err = counter->ops->count_write(counter, count, val);
 	if (err)
 		return err;
 
diff --git a/drivers/counter/ftm-quaddec.c b/drivers/counter/ftm-quaddec.c
index 4046aa9f9234..c2b3fdfd8b77 100644
--- a/drivers/counter/ftm-quaddec.c
+++ b/drivers/counter/ftm-quaddec.c
@@ -178,31 +178,25 @@ static const enum counter_count_function ftm_quaddec_count_functions[] = {
 
 static int ftm_quaddec_count_read(struct counter_device *counter,
 				  struct counter_count *count,
-				  struct counter_count_read_value *val)
+				  unsigned long *val)
 {
 	struct ftm_quaddec *const ftm = counter->priv;
 	uint32_t cntval;
 
 	ftm_read(ftm, FTM_CNT, &cntval);
 
-	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &cntval);
+	*val = cntval;
 
 	return 0;
 }
 
 static int ftm_quaddec_count_write(struct counter_device *counter,
 				   struct counter_count *count,
-				   struct counter_count_write_value *val)
+				   const unsigned long val)
 {
 	struct ftm_quaddec *const ftm = counter->priv;
-	u32 cnt;
-	int err;
 
-	err = counter_count_write_value_get(&cnt, COUNTER_COUNT_POSITION, val);
-	if (err)
-		return err;
-
-	if (cnt != 0) {
+	if (val != 0) {
 		dev_warn(&ftm->pdev->dev, "Can only accept '0' as new counter value\n");
 		return -EINVAL;
 	}
diff --git a/drivers/counter/stm32-lptimer-cnt.c b/drivers/counter/stm32-lptimer-cnt.c
index 28b63645c411..8e276eb655f5 100644
--- a/drivers/counter/stm32-lptimer-cnt.c
+++ b/drivers/counter/stm32-lptimer-cnt.c
@@ -377,8 +377,7 @@ static enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
 };
 
 static int stm32_lptim_cnt_read(struct counter_device *counter,
-				struct counter_count *count,
-				struct counter_count_read_value *val)
+				struct counter_count *count, unsigned long *val)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
 	u32 cnt;
@@ -388,7 +387,7 @@ static int stm32_lptim_cnt_read(struct counter_device *counter,
 	if (ret)
 		return ret;
 
-	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &cnt);
+	*val = cnt;
 
 	return 0;
 }
diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
index b61135b63ee8..3eafccec3beb 100644
--- a/drivers/counter/stm32-timer-cnt.c
+++ b/drivers/counter/stm32-timer-cnt.c
@@ -48,34 +48,27 @@ static enum counter_count_function stm32_count_functions[] = {
 };
 
 static int stm32_count_read(struct counter_device *counter,
-			    struct counter_count *count,
-			    struct counter_count_read_value *val)
+			    struct counter_count *count, unsigned long *val)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
 	u32 cnt;
 
 	regmap_read(priv->regmap, TIM_CNT, &cnt);
-	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &cnt);
+	*val = cnt;
 
 	return 0;
 }
 
 static int stm32_count_write(struct counter_device *counter,
 			     struct counter_count *count,
-			     struct counter_count_write_value *val)
+			     const unsigned long val)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
-	u32 cnt;
-	int err;
-
-	err = counter_count_write_value_get(&cnt, COUNTER_COUNT_POSITION, val);
-	if (err)
-		return err;
 
-	if (cnt > priv->ceiling)
+	if (val > priv->ceiling)
 		return -EINVAL;
 
-	return regmap_write(priv->regmap, TIM_CNT, cnt);
+	return regmap_write(priv->regmap, TIM_CNT, val);
 }
 
 static int stm32_count_function_get(struct counter_device *counter,
diff --git a/drivers/counter/ti-eqep.c b/drivers/counter/ti-eqep.c
new file mode 100644
index 000000000000..1ff07faef27f
--- /dev/null
+++ b/drivers/counter/ti-eqep.c
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 David Lechner <david@lechnology.com>
+ *
+ * Counter driver for Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP)
+ */
+
+#include <linux/bitops.h>
+#include <linux/counter.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+/* 32-bit registers */
+#define QPOSCNT		0x0
+#define QPOSINIT	0x4
+#define QPOSMAX		0x8
+#define QPOSCMP		0xc
+#define QPOSILAT	0x10
+#define QPOSSLAT	0x14
+#define QPOSLAT		0x18
+#define QUTMR		0x1c
+#define QUPRD		0x20
+
+/* 16-bit registers */
+#define QWDTMR		0x0	/* 0x24 */
+#define QWDPRD		0x2	/* 0x26 */
+#define QDECCTL		0x4	/* 0x28 */
+#define QEPCTL		0x6	/* 0x2a */
+#define QCAPCTL		0x8	/* 0x2c */
+#define QPOSCTL		0xa	/* 0x2e */
+#define QEINT		0xc	/* 0x30 */
+#define QFLG		0xe	/* 0x32 */
+#define QCLR		0x10	/* 0x34 */
+#define QFRC		0x12	/* 0x36 */
+#define QEPSTS		0x14	/* 0x38 */
+#define QCTMR		0x16	/* 0x3a */
+#define QCPRD		0x18	/* 0x3c */
+#define QCTMRLAT	0x1a	/* 0x3e */
+#define QCPRDLAT	0x1c	/* 0x40 */
+
+#define QDECCTL_QSRC_SHIFT	14
+#define QDECCTL_QSRC		GENMASK(15, 14)
+#define QDECCTL_SOEN		BIT(13)
+#define QDECCTL_SPSEL		BIT(12)
+#define QDECCTL_XCR		BIT(11)
+#define QDECCTL_SWAP		BIT(10)
+#define QDECCTL_IGATE		BIT(9)
+#define QDECCTL_QAP		BIT(8)
+#define QDECCTL_QBP		BIT(7)
+#define QDECCTL_QIP		BIT(6)
+#define QDECCTL_QSP		BIT(5)
+
+#define QEPCTL_FREE_SOFT	GENMASK(15, 14)
+#define QEPCTL_PCRM		GENMASK(13, 12)
+#define QEPCTL_SEI		GENMASK(11, 10)
+#define QEPCTL_IEI		GENMASK(9, 8)
+#define QEPCTL_SWI		BIT(7)
+#define QEPCTL_SEL		BIT(6)
+#define QEPCTL_IEL		GENMASK(5, 4)
+#define QEPCTL_PHEN		BIT(3)
+#define QEPCTL_QCLM		BIT(2)
+#define QEPCTL_UTE		BIT(1)
+#define QEPCTL_WDE		BIT(0)
+
+/* EQEP Inputs */
+enum {
+	TI_EQEP_SIGNAL_QEPA,	/* QEPA/XCLK */
+	TI_EQEP_SIGNAL_QEPB,	/* QEPB/XDIR */
+};
+
+/* Position Counter Input Modes */
+enum {
+	TI_EQEP_COUNT_FUNC_QUAD_COUNT,
+	TI_EQEP_COUNT_FUNC_DIR_COUNT,
+	TI_EQEP_COUNT_FUNC_UP_COUNT,
+	TI_EQEP_COUNT_FUNC_DOWN_COUNT,
+};
+
+enum {
+	TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES,
+	TI_EQEP_SYNAPSE_ACTION_RISING_EDGE,
+	TI_EQEP_SYNAPSE_ACTION_NONE,
+};
+
+struct ti_eqep_cnt {
+	struct counter_device counter;
+	struct regmap *regmap32;
+	struct regmap *regmap16;
+};
+
+static int ti_eqep_count_read(struct counter_device *counter,
+			      struct counter_count *count, unsigned long *val)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 cnt;
+
+	regmap_read(priv->regmap32, QPOSCNT, &cnt);
+	*val = cnt;
+
+	return 0;
+}
+
+static int ti_eqep_count_write(struct counter_device *counter,
+			       struct counter_count *count, unsigned long val)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 max;
+
+	regmap_read(priv->regmap32, QPOSMAX, &max);
+	if (val > max)
+		return -EINVAL;
+
+	return regmap_write(priv->regmap32, QPOSCNT, val);
+}
+
+static int ti_eqep_function_get(struct counter_device *counter,
+				struct counter_count *count, size_t *function)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qdecctl;
+
+	regmap_read(priv->regmap16, QDECCTL, &qdecctl);
+	*function = (qdecctl & QDECCTL_QSRC) >> QDECCTL_QSRC_SHIFT;
+
+	return 0;
+}
+
+static int ti_eqep_function_set(struct counter_device *counter,
+				struct counter_count *count, size_t function)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+
+	return regmap_write_bits(priv->regmap16, QDECCTL, QDECCTL_QSRC,
+				 function << QDECCTL_QSRC_SHIFT);
+}
+
+static int ti_eqep_action_get(struct counter_device *counter,
+			      struct counter_count *count,
+			      struct counter_synapse *synapse, size_t *action)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	size_t function;
+	u32 qdecctl;
+	int err;
+
+	err = ti_eqep_function_get(counter, count, &function);
+	if (err)
+		return err;
+
+	switch (function) {
+	case TI_EQEP_COUNT_FUNC_QUAD_COUNT:
+		/* In quadrature mode, the rising and falling edge of both
+		 * QEPA and QEPB trigger QCLK.
+		 */
+		*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
+		break;
+	case TI_EQEP_COUNT_FUNC_DIR_COUNT:
+		/* In direction-count mode only rising edge of QEPA is counted
+		 * and QEPB gives direction.
+		 */
+		switch (synapse->signal->id) {
+		case TI_EQEP_SIGNAL_QEPA:
+			*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
+			break;
+		default:
+			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
+			break;
+		}
+		break;
+	case TI_EQEP_COUNT_FUNC_UP_COUNT:
+	case TI_EQEP_COUNT_FUNC_DOWN_COUNT:
+		/* In up/down-count modes only QEPA is counted and QEPB is not
+		 * used.
+		 */
+		switch (synapse->signal->id) {
+		case TI_EQEP_SIGNAL_QEPA:
+			err = regmap_read(priv->regmap16, QDECCTL, &qdecctl);
+			if (err)
+				return err;
+
+			if (qdecctl & QDECCTL_XCR)
+				*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
+			else
+				*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
+			break;
+		default:
+			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
+			break;
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static const struct counter_ops ti_eqep_counter_ops = {
+	.count_read	= ti_eqep_count_read,
+	.count_write	= ti_eqep_count_write,
+	.function_get	= ti_eqep_function_get,
+	.function_set	= ti_eqep_function_set,
+	.action_get	= ti_eqep_action_get,
+};
+
+static ssize_t ti_eqep_position_ceiling_read(struct counter_device *counter,
+					     struct counter_count *count,
+					     void *ext_priv, char *buf)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qposmax;
+
+	regmap_read(priv->regmap32, QPOSMAX, &qposmax);
+
+	return sprintf(buf, "%u\n", qposmax);
+}
+
+static ssize_t ti_eqep_position_ceiling_write(struct counter_device *counter,
+					      struct counter_count *count,
+					      void *ext_priv, const char *buf,
+					      size_t len)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	int err;
+	u32 res;
+
+	err = kstrtouint(buf, 0, &res);
+	if (err < 0)
+		return err;
+
+	regmap_write(priv->regmap32, QPOSMAX, res);
+
+	return len;
+}
+
+static ssize_t ti_eqep_position_floor_read(struct counter_device *counter,
+					   struct counter_count *count,
+					   void *ext_priv, char *buf)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qposinit;
+
+	regmap_read(priv->regmap32, QPOSINIT, &qposinit);
+
+	return sprintf(buf, "%u\n", qposinit);
+}
+
+static ssize_t ti_eqep_position_floor_write(struct counter_device *counter,
+					    struct counter_count *count,
+					    void *ext_priv, const char *buf,
+					    size_t len)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	int err;
+	u32 res;
+
+	err = kstrtouint(buf, 0, &res);
+	if (err < 0)
+		return err;
+
+	regmap_write(priv->regmap32, QPOSINIT, res);
+
+	return len;
+}
+
+static ssize_t ti_eqep_position_enable_read(struct counter_device *counter,
+					    struct counter_count *count,
+					    void *ext_priv, char *buf)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qepctl;
+
+	regmap_read(priv->regmap16, QEPCTL, &qepctl);
+
+	return sprintf(buf, "%u\n", !!(qepctl & QEPCTL_PHEN));
+}
+
+static ssize_t ti_eqep_position_enable_write(struct counter_device *counter,
+					     struct counter_count *count,
+					     void *ext_priv, const char *buf,
+					     size_t len)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	int err;
+	bool res;
+
+	err = kstrtobool(buf, &res);
+	if (err < 0)
+		return err;
+
+	regmap_write_bits(priv->regmap16, QEPCTL, QEPCTL_PHEN, res ? -1 : 0);
+
+	return len;
+}
+
+static struct counter_count_ext ti_eqep_position_ext[] = {
+	{
+		.name	= "ceiling",
+		.read	= ti_eqep_position_ceiling_read,
+		.write	= ti_eqep_position_ceiling_write,
+	},
+	{
+		.name	= "floor",
+		.read	= ti_eqep_position_floor_read,
+		.write	= ti_eqep_position_floor_write,
+	},
+	{
+		.name	= "enable",
+		.read	= ti_eqep_position_enable_read,
+		.write	= ti_eqep_position_enable_write,
+	},
+};
+
+static struct counter_signal ti_eqep_signals[] = {
+	[TI_EQEP_SIGNAL_QEPA] = {
+		.id = TI_EQEP_SIGNAL_QEPA,
+		.name = "QEPA"
+	},
+	[TI_EQEP_SIGNAL_QEPB] = {
+		.id = TI_EQEP_SIGNAL_QEPB,
+		.name = "QEPB"
+	},
+};
+
+static const enum counter_count_function ti_eqep_position_functions[] = {
+	[TI_EQEP_COUNT_FUNC_QUAD_COUNT]	= COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+	[TI_EQEP_COUNT_FUNC_DIR_COUNT]	= COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
+	[TI_EQEP_COUNT_FUNC_UP_COUNT]	= COUNTER_COUNT_FUNCTION_INCREASE,
+	[TI_EQEP_COUNT_FUNC_DOWN_COUNT]	= COUNTER_COUNT_FUNCTION_DECREASE,
+};
+
+static const enum counter_synapse_action ti_eqep_position_synapse_actions[] = {
+	[TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES]	= COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
+	[TI_EQEP_SYNAPSE_ACTION_RISING_EDGE]	= COUNTER_SYNAPSE_ACTION_RISING_EDGE,
+	[TI_EQEP_SYNAPSE_ACTION_NONE]		= COUNTER_SYNAPSE_ACTION_NONE,
+};
+
+static struct counter_synapse ti_eqep_position_synapses[] = {
+	{
+		.actions_list	= ti_eqep_position_synapse_actions,
+		.num_actions	= ARRAY_SIZE(ti_eqep_position_synapse_actions),
+		.signal		= &ti_eqep_signals[TI_EQEP_SIGNAL_QEPA],
+	},
+	{
+		.actions_list	= ti_eqep_position_synapse_actions,
+		.num_actions	= ARRAY_SIZE(ti_eqep_position_synapse_actions),
+		.signal		= &ti_eqep_signals[TI_EQEP_SIGNAL_QEPB],
+	},
+};
+
+static struct counter_count ti_eqep_counts[] = {
+	{
+		.id		= 0,
+		.name		= "QPOSCNT",
+		.functions_list	= ti_eqep_position_functions,
+		.num_functions	= ARRAY_SIZE(ti_eqep_position_functions),
+		.synapses	= ti_eqep_position_synapses,
+		.num_synapses	= ARRAY_SIZE(ti_eqep_position_synapses),
+		.ext		= ti_eqep_position_ext,
+		.num_ext	= ARRAY_SIZE(ti_eqep_position_ext),
+	},
+};
+
+static const struct regmap_config ti_eqep_regmap32_config = {
+	.name = "32-bit",
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0x24,
+};
+
+static const struct regmap_config ti_eqep_regmap16_config = {
+	.name = "16-bit",
+	.reg_bits = 16,
+	.val_bits = 16,
+	.reg_stride = 2,
+	.max_register = 0x1e,
+};
+
+static int ti_eqep_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ti_eqep_cnt *priv;
+	void __iomem *base;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap32 = devm_regmap_init_mmio(dev, base,
+					       &ti_eqep_regmap32_config);
+	if (IS_ERR(priv->regmap32))
+		return PTR_ERR(priv->regmap32);
+
+	priv->regmap16 = devm_regmap_init_mmio(dev, base + 0x24,
+					       &ti_eqep_regmap16_config);
+	if (IS_ERR(priv->regmap16))
+		return PTR_ERR(priv->regmap16);
+
+	priv->counter.name = dev_name(dev);
+	priv->counter.parent = dev;
+	priv->counter.ops = &ti_eqep_counter_ops;
+	priv->counter.counts = ti_eqep_counts;
+	priv->counter.num_counts = ARRAY_SIZE(ti_eqep_counts);
+	priv->counter.signals = ti_eqep_signals;
+	priv->counter.num_signals = ARRAY_SIZE(ti_eqep_signals);
+	priv->counter.priv = priv;
+
+	platform_set_drvdata(pdev, priv);
+
+	/*
+	 * Need to make sure power is turned on. On AM33xx, this comes from the
+	 * parent PWMSS bus driver. On AM17xx, this comes from the PSC power
+	 * domain.
+	 */
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	err = counter_register(&priv->counter);
+	if (err < 0) {
+		pm_runtime_put_sync(dev);
+		pm_runtime_disable(dev);
+		return err;
+	}
+
+	return 0;
+}
+
+static int ti_eqep_remove(struct platform_device *pdev)
+{
+	struct ti_eqep_cnt *priv = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+
+	counter_unregister(&priv->counter);
+	pm_runtime_put_sync(dev),
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static const struct of_device_id ti_eqep_of_match[] = {
+	{ .compatible = "ti,am3352-eqep", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ti_eqep_of_match);
+
+static struct platform_driver ti_eqep_driver = {
+	.probe = ti_eqep_probe,
+	.remove = ti_eqep_remove,
+	.driver = {
+		.name = "ti-eqep-cnt",
+		.of_match_table = ti_eqep_of_match,
+	},
+};
+module_platform_driver(ti_eqep_driver);
+
+MODULE_AUTHOR("David Lechner <david@lechnology.com>");
+MODULE_DESCRIPTION("TI eQEP counter driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 13a6b4afb4b3..5308c59d7001 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -40,7 +40,8 @@ comment "Native drivers"
 
 config SENSORS_AB8500
 	tristate "AB8500 thermal monitoring"
-	depends on AB8500_GPADC && AB8500_BM
+	depends on AB8500_GPADC && AB8500_BM && (IIO = y)
+	default n
 	help
 	  If you say yes here you get support for the thermal sensor part
 	  of the AB8500 chip. The driver includes thermal management for
diff --git a/drivers/hwmon/ab8500.c b/drivers/hwmon/ab8500.c
index 207f77f85a40..53f3379d799d 100644
--- a/drivers/hwmon/ab8500.c
+++ b/drivers/hwmon/ab8500.c
@@ -17,20 +17,24 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/power/ab8500.h>
 #include <linux/reboot.h>
 #include <linux/slab.h>
 #include <linux/sysfs.h>
+#include <linux/iio/consumer.h>
 #include "abx500.h"
 
 #define DEFAULT_POWER_OFF_DELAY	(HZ * 10)
 #define THERMAL_VCC		1800
 #define PULL_UP_RESISTOR	47000
-/* Number of monitored sensors should not greater than NUM_SENSORS */
-#define NUM_MONITORED_SENSORS	4
+
+#define AB8500_SENSOR_AUX1		0
+#define AB8500_SENSOR_AUX2		1
+#define AB8500_SENSOR_BTEMP_BALL	2
+#define AB8500_SENSOR_BAT_CTRL		3
+#define NUM_MONITORED_SENSORS		4
 
 struct ab8500_gpadc_cfg {
 	const struct abx500_res_to_temp *temp_tbl;
@@ -40,7 +44,8 @@ struct ab8500_gpadc_cfg {
 };
 
 struct ab8500_temp {
-	struct ab8500_gpadc *gpadc;
+	struct iio_channel *aux1;
+	struct iio_channel *aux2;
 	struct ab8500_btemp *btemp;
 	struct delayed_work power_off_work;
 	struct ab8500_gpadc_cfg cfg;
@@ -82,15 +87,21 @@ static int ab8500_read_sensor(struct abx500_temp *data, u8 sensor, int *temp)
 	int voltage, ret;
 	struct ab8500_temp *ab8500_data = data->plat_data;
 
-	if (sensor == BAT_CTRL) {
-		*temp = ab8500_btemp_get_batctrl_temp(ab8500_data->btemp);
-	} else if (sensor == BTEMP_BALL) {
+	if (sensor == AB8500_SENSOR_BTEMP_BALL) {
 		*temp = ab8500_btemp_get_temp(ab8500_data->btemp);
-	} else {
-		voltage = ab8500_gpadc_convert(ab8500_data->gpadc, sensor);
-		if (voltage < 0)
-			return voltage;
-
+	} else if (sensor == AB8500_SENSOR_BAT_CTRL) {
+		*temp = ab8500_btemp_get_batctrl_temp(ab8500_data->btemp);
+	} else if (sensor == AB8500_SENSOR_AUX1) {
+		ret = iio_read_channel_processed(ab8500_data->aux1, &voltage);
+		if (ret < 0)
+			return ret;
+		ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp);
+		if (ret < 0)
+			return ret;
+	} else if (sensor == AB8500_SENSOR_AUX2) {
+		ret = iio_read_channel_processed(ab8500_data->aux2, &voltage);
+		if (ret < 0)
+			return ret;
 		ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp);
 		if (ret < 0)
 			return ret;
@@ -164,10 +175,6 @@ int abx500_hwmon_init(struct abx500_temp *data)
 	if (!ab8500_data)
 		return -ENOMEM;
 
-	ab8500_data->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	if (IS_ERR(ab8500_data->gpadc))
-		return PTR_ERR(ab8500_data->gpadc);
-
 	ab8500_data->btemp = ab8500_btemp_get();
 	if (IS_ERR(ab8500_data->btemp))
 		return PTR_ERR(ab8500_data->btemp);
@@ -181,15 +188,25 @@ int abx500_hwmon_init(struct abx500_temp *data)
 	ab8500_data->cfg.tbl_sz = ab8500_temp_tbl_a_size;
 
 	data->plat_data = ab8500_data;
+	ab8500_data->aux1 = devm_iio_channel_get(&data->pdev->dev, "aux1");
+	if (IS_ERR(ab8500_data->aux1)) {
+		if (PTR_ERR(ab8500_data->aux1) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&data->pdev->dev, "failed to get AUX1 ADC channel\n");
+		return PTR_ERR(ab8500_data->aux1);
+	}
+	ab8500_data->aux2 = devm_iio_channel_get(&data->pdev->dev, "aux2");
+	if (IS_ERR(ab8500_data->aux2)) {
+		if (PTR_ERR(ab8500_data->aux2) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&data->pdev->dev, "failed to get AUX2 ADC channel\n");
+		return PTR_ERR(ab8500_data->aux2);
+	}
 
-	/*
-	 * ADC_AUX1 and ADC_AUX2, connected to external NTC
-	 * BTEMP_BALL and BAT_CTRL, fixed usage
-	 */
-	data->gpadc_addr[0] = ADC_AUX1;
-	data->gpadc_addr[1] = ADC_AUX2;
-	data->gpadc_addr[2] = BTEMP_BALL;
-	data->gpadc_addr[3] = BAT_CTRL;
+	data->gpadc_addr[0] = AB8500_SENSOR_AUX1;
+	data->gpadc_addr[1] = AB8500_SENSOR_AUX2;
+	data->gpadc_addr[2] = AB8500_SENSOR_BTEMP_BALL;
+	data->gpadc_addr[3] = AB8500_SENSOR_BAT_CTRL;
 	data->monitored_sensors = NUM_MONITORED_SENSORS;
 
 	data->ops.read_sensor = ab8500_read_sensor;
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 2e37f8a6d8cf..7b837641f166 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -15,7 +15,6 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index f0af3a42f53c..9554890a3200 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -6,6 +6,16 @@
 
 menu "Analog to digital converters"
 
+config AB8500_GPADC
+	bool "ST-Ericsson AB8500 GPADC driver"
+	depends on AB8500_CORE && REGULATOR_AB8500
+	default y
+	help
+	  AB8500 Analog Baseband, mixed signal integrated circuit GPADC
+	  (General Purpose Analog to Digital Converter) driver used to monitor
+	  internal voltages, convert accessory and battery, AC (charger, mains)
+	  and USB voltages integral to the U8500 platform.
+
 config AD_SIGMA_DELTA
 	tristate
 	select IIO_BUFFER
@@ -432,6 +442,17 @@ config INGENIC_ADC
 	  This driver can also be built as a module. If so, the module will be
 	  called ingenic_adc.
 
+config INTEL_MRFLD_ADC
+	tristate "Intel Merrifield Basin Cove ADC driver"
+	depends on INTEL_SOC_PMIC_MRFLD
+	help
+	  Say yes here to have support for Basin Cove power management IC (PMIC) ADC
+	  device. Depending on platform configuration, this general purpose ADC can
+	  be used for sampling sensors such as thermal resistors.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called intel_mrfld_adc.
+
 config IMX7D_ADC
 	tristate "Freescale IMX7D ADC driver"
 	depends on ARCH_MXC || COMPILE_TEST
@@ -508,8 +529,8 @@ config MAX1027
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	  Say yes here to build support for Maxim SPI ADC models
-	  max1027, max1029 and max1031.
+	  Say yes here to build support for Maxim SPI {10,12}-bit ADC models:
+	  max1027, max1029, max1031, max1227, max1229 and max1231.
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called max1027.
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index ef9cc485fb67..5ecc481c2967 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -4,6 +4,7 @@
 #
 
 # When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
 obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
 obj-$(CONFIG_AD7124) += ad7124.o
 obj-$(CONFIG_AD7266) += ad7266.o
@@ -42,6 +43,7 @@ obj-$(CONFIG_HX711) += hx711.o
 obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
 obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
 obj-$(CONFIG_INGENIC_ADC) += ingenic-adc.o
+obj-$(CONFIG_INTEL_MRFLD_ADC) += intel_mrfld_adc.o
 obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
 obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o
 obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
diff --git a/drivers/iio/adc/ab8500-gpadc.c b/drivers/iio/adc/ab8500-gpadc.c
new file mode 100644
index 000000000000..fd5b18d7f0c2
--- /dev/null
+++ b/drivers/iio/adc/ab8500-gpadc.c
@@ -0,0 +1,1218 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Arun R Murthy <arun.murthy@stericsson.com>
+ * Author: Daniel Willerud <daniel.willerud@stericsson.com>
+ * Author: Johan Palsson <johan.palsson@stericsson.com>
+ * Author: M'boumba Cedric Madianga
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * AB8500 General Purpose ADC driver. The AB8500 uses reference voltages:
+ * VinVADC, and VADC relative to GND to do its job. It monitors main and backup
+ * battery voltages, AC (mains) voltage, USB cable voltage, as well as voltages
+ * representing the temperature of the chip die and battery, accessory
+ * detection by resistance measurements using relative voltages and GSM burst
+ * information.
+ *
+ * Some of the voltages are measured on external pins on the IC, such as
+ * battery temperature or "ADC aux" 1 and 2. Other voltages are internal rails
+ * from other parts of the ASIC such as main charger voltage, main and battery
+ * backup voltage or USB VBUS voltage. For this reason drivers for other
+ * parts of the system are required to obtain handles to the ADC to do work
+ * for them and the IIO driver provides arbitration among these consumers.
+ */
+#include <linux/init.h>
+#include <linux/bits.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
+#include <linux/random.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+
+/* GPADC register offsets and bit definitions */
+
+#define AB8500_GPADC_CTRL1_REG		0x00
+/* GPADC control register 1 bits */
+#define AB8500_GPADC_CTRL1_DISABLE		0x00
+#define AB8500_GPADC_CTRL1_ENABLE		BIT(0)
+#define AB8500_GPADC_CTRL1_TRIG_ENA		BIT(1)
+#define AB8500_GPADC_CTRL1_START_SW_CONV	BIT(2)
+#define AB8500_GPADC_CTRL1_BTEMP_PULL_UP	BIT(3)
+/* 0 = use rising edge, 1 = use falling edge */
+#define AB8500_GPADC_CTRL1_TRIG_EDGE		BIT(4)
+/* 0 = use VTVOUT, 1 = use VRTC as pull-up supply for battery temp NTC */
+#define AB8500_GPADC_CTRL1_PUPSUPSEL		BIT(5)
+#define AB8500_GPADC_CTRL1_BUF_ENA		BIT(6)
+#define AB8500_GPADC_CTRL1_ICHAR_ENA		BIT(7)
+
+#define AB8500_GPADC_CTRL2_REG		0x01
+#define AB8500_GPADC_CTRL3_REG		0x02
+/*
+ * GPADC control register 2 and 3 bits
+ * the bit layout is the same for SW and HW conversion set-up
+ */
+#define AB8500_GPADC_CTRL2_AVG_1		0x00
+#define AB8500_GPADC_CTRL2_AVG_4		BIT(5)
+#define AB8500_GPADC_CTRL2_AVG_8		BIT(6)
+#define AB8500_GPADC_CTRL2_AVG_16		(BIT(5) | BIT(6))
+
+enum ab8500_gpadc_channel {
+	AB8500_GPADC_CHAN_UNUSED = 0x00,
+	AB8500_GPADC_CHAN_BAT_CTRL = 0x01,
+	AB8500_GPADC_CHAN_BAT_TEMP = 0x02,
+	/* This is not used on AB8505 */
+	AB8500_GPADC_CHAN_MAIN_CHARGER = 0x03,
+	AB8500_GPADC_CHAN_ACC_DET_1 = 0x04,
+	AB8500_GPADC_CHAN_ACC_DET_2 = 0x05,
+	AB8500_GPADC_CHAN_ADC_AUX_1 = 0x06,
+	AB8500_GPADC_CHAN_ADC_AUX_2 = 0x07,
+	AB8500_GPADC_CHAN_VBAT_A = 0x08,
+	AB8500_GPADC_CHAN_VBUS = 0x09,
+	AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT = 0x0a,
+	AB8500_GPADC_CHAN_USB_CHARGER_CURRENT = 0x0b,
+	AB8500_GPADC_CHAN_BACKUP_BAT = 0x0c,
+	/* Only on AB8505 */
+	AB8505_GPADC_CHAN_DIE_TEMP = 0x0d,
+	AB8500_GPADC_CHAN_ID = 0x0e,
+	AB8500_GPADC_CHAN_INTERNAL_TEST_1 = 0x0f,
+	AB8500_GPADC_CHAN_INTERNAL_TEST_2 = 0x10,
+	AB8500_GPADC_CHAN_INTERNAL_TEST_3 = 0x11,
+	/* FIXME: Applicable to all ASIC variants? */
+	AB8500_GPADC_CHAN_XTAL_TEMP = 0x12,
+	AB8500_GPADC_CHAN_VBAT_TRUE_MEAS = 0x13,
+	/* FIXME: Doesn't seem to work with pure AB8500 */
+	AB8500_GPADC_CHAN_BAT_CTRL_AND_IBAT = 0x1c,
+	AB8500_GPADC_CHAN_VBAT_MEAS_AND_IBAT = 0x1d,
+	AB8500_GPADC_CHAN_VBAT_TRUE_MEAS_AND_IBAT = 0x1e,
+	AB8500_GPADC_CHAN_BAT_TEMP_AND_IBAT = 0x1f,
+	/*
+	 * Virtual channel used only for ibat conversion to ampere.
+	 * Battery current conversion (ibat) cannot be requested as a
+	 * single conversion but it is always requested in combination
+	 * with other input requests.
+	 */
+	AB8500_GPADC_CHAN_IBAT_VIRTUAL = 0xFF,
+};
+
+#define AB8500_GPADC_AUTO_TIMER_REG	0x03
+
+#define AB8500_GPADC_STAT_REG		0x04
+#define AB8500_GPADC_STAT_BUSY		BIT(0)
+
+#define AB8500_GPADC_MANDATAL_REG	0x05
+#define AB8500_GPADC_MANDATAH_REG	0x06
+#define AB8500_GPADC_AUTODATAL_REG	0x07
+#define AB8500_GPADC_AUTODATAH_REG	0x08
+#define AB8500_GPADC_MUX_CTRL_REG	0x09
+#define AB8540_GPADC_MANDATA2L_REG	0x09
+#define AB8540_GPADC_MANDATA2H_REG	0x0A
+#define AB8540_GPADC_APEAAX_REG		0x10
+#define AB8540_GPADC_APEAAT_REG		0x11
+#define AB8540_GPADC_APEAAM_REG		0x12
+#define AB8540_GPADC_APEAAH_REG		0x13
+#define AB8540_GPADC_APEAAL_REG		0x14
+
+/*
+ * OTP register offsets
+ * Bank : 0x15
+ */
+#define AB8500_GPADC_CAL_1	0x0F
+#define AB8500_GPADC_CAL_2	0x10
+#define AB8500_GPADC_CAL_3	0x11
+#define AB8500_GPADC_CAL_4	0x12
+#define AB8500_GPADC_CAL_5	0x13
+#define AB8500_GPADC_CAL_6	0x14
+#define AB8500_GPADC_CAL_7	0x15
+/* New calibration for 8540 */
+#define AB8540_GPADC_OTP4_REG_7	0x38
+#define AB8540_GPADC_OTP4_REG_6	0x39
+#define AB8540_GPADC_OTP4_REG_5	0x3A
+
+#define AB8540_GPADC_DIS_ZERO	0x00
+#define AB8540_GPADC_EN_VBIAS_XTAL_TEMP	0x02
+
+/* GPADC constants from AB8500 spec, UM0836 */
+#define AB8500_ADC_RESOLUTION		1024
+#define AB8500_ADC_CH_BTEMP_MIN		0
+#define AB8500_ADC_CH_BTEMP_MAX		1350
+#define AB8500_ADC_CH_DIETEMP_MIN	0
+#define AB8500_ADC_CH_DIETEMP_MAX	1350
+#define AB8500_ADC_CH_CHG_V_MIN		0
+#define AB8500_ADC_CH_CHG_V_MAX		20030
+#define AB8500_ADC_CH_ACCDET2_MIN	0
+#define AB8500_ADC_CH_ACCDET2_MAX	2500
+#define AB8500_ADC_CH_VBAT_MIN		2300
+#define AB8500_ADC_CH_VBAT_MAX		4800
+#define AB8500_ADC_CH_CHG_I_MIN		0
+#define AB8500_ADC_CH_CHG_I_MAX		1500
+#define AB8500_ADC_CH_BKBAT_MIN		0
+#define AB8500_ADC_CH_BKBAT_MAX		3200
+
+/* GPADC constants from AB8540 spec */
+#define AB8500_ADC_CH_IBAT_MIN		(-6000) /* mA range measured by ADC for ibat */
+#define AB8500_ADC_CH_IBAT_MAX		6000
+#define AB8500_ADC_CH_IBAT_MIN_V	(-60)	/* mV range measured by ADC for ibat */
+#define AB8500_ADC_CH_IBAT_MAX_V	60
+#define AB8500_GPADC_IBAT_VDROP_L	(-56)  /* mV */
+#define AB8500_GPADC_IBAT_VDROP_H	56
+
+/* This is used to not lose precision when dividing to get gain and offset */
+#define AB8500_GPADC_CALIB_SCALE	1000
+/*
+ * Number of bits shift used to not lose precision
+ * when dividing to get ibat gain.
+ */
+#define AB8500_GPADC_CALIB_SHIFT_IBAT	20
+
+/* Time in ms before disabling regulator */
+#define AB8500_GPADC_AUTOSUSPEND_DELAY	1
+
+#define AB8500_GPADC_CONVERSION_TIME	500 /* ms */
+
+enum ab8500_cal_channels {
+	AB8500_CAL_VMAIN = 0,
+	AB8500_CAL_BTEMP,
+	AB8500_CAL_VBAT,
+	AB8500_CAL_IBAT,
+	AB8500_CAL_NR,
+};
+
+/**
+ * struct ab8500_adc_cal_data - Table for storing gain and offset for the
+ * calibrated ADC channels
+ * @gain: Gain of the ADC channel
+ * @offset: Offset of the ADC channel
+ * @otp_calib_hi: Calibration from OTP
+ * @otp_calib_lo: Calibration from OTP
+ */
+struct ab8500_adc_cal_data {
+	s64 gain;
+	s64 offset;
+	u16 otp_calib_hi;
+	u16 otp_calib_lo;
+};
+
+/**
+ * struct ab8500_gpadc_chan_info - per-channel GPADC info
+ * @name: name of the channel
+ * @id: the internal AB8500 ID number for the channel
+ * @hardware_control: indicate that we want to use hardware ADC control
+ * on this channel, the default is software ADC control. Hardware control
+ * is normally only used to test the battery voltage during GSM bursts
+ * and needs a hardware trigger on the GPADCTrig pin of the ASIC.
+ * @falling_edge: indicate that we want to trigger on falling edge
+ * rather than rising edge, rising edge is the default
+ * @avg_sample: how many samples to average: must be 1, 4, 8 or 16.
+ * @trig_timer: how long to wait for the trigger, in 32kHz periods:
+ * 0 .. 255 periods
+ */
+struct ab8500_gpadc_chan_info {
+	const char *name;
+	u8 id;
+	bool hardware_control;
+	bool falling_edge;
+	u8 avg_sample;
+	u8 trig_timer;
+};
+
+/**
+ * struct ab8500_gpadc - AB8500 GPADC device information
+ * @dev: pointer to the containing device
+ * @ab8500: pointer to the parent AB8500 device
+ * @chans: internal per-channel information container
+ * @nchans: number of channels
+ * @complete: pointer to the completion that indicates
+ * the completion of an gpadc conversion cycle
+ * @vddadc: pointer to the regulator supplying VDDADC
+ * @irq_sw: interrupt number that is used by gpadc for software ADC conversion
+ * @irq_hw: interrupt number that is used by gpadc for hardware ADC conversion
+ * @cal_data: array of ADC calibration data structs
+ */
+struct ab8500_gpadc {
+	struct device *dev;
+	struct ab8500 *ab8500;
+	struct ab8500_gpadc_chan_info *chans;
+	unsigned int nchans;
+	struct completion complete;
+	struct regulator *vddadc;
+	int irq_sw;
+	int irq_hw;
+	struct ab8500_adc_cal_data cal_data[AB8500_CAL_NR];
+};
+
+static struct ab8500_gpadc_chan_info *
+ab8500_gpadc_get_channel(struct ab8500_gpadc *gpadc, u8 chan)
+{
+	struct ab8500_gpadc_chan_info *ch;
+	int i;
+
+	for (i = 0; i < gpadc->nchans; i++) {
+		ch = &gpadc->chans[i];
+		if (ch->id == chan)
+			break;
+	}
+	if (i == gpadc->nchans)
+		return NULL;
+
+	return ch;
+}
+
+/**
+ * ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage
+ * @gpadc: GPADC instance
+ * @ch: the sampled channel this raw value is coming from
+ * @ad_value: the raw value
+ */
+static int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
+				      enum ab8500_gpadc_channel ch,
+				      int ad_value)
+{
+	int res;
+
+	switch (ch) {
+	case AB8500_GPADC_CHAN_MAIN_CHARGER:
+		/* No calibration data available: just interpolate */
+		if (!gpadc->cal_data[AB8500_CAL_VMAIN].gain) {
+			res = AB8500_ADC_CH_CHG_V_MIN + (AB8500_ADC_CH_CHG_V_MAX -
+				AB8500_ADC_CH_CHG_V_MIN) * ad_value /
+				AB8500_ADC_RESOLUTION;
+			break;
+		}
+		/* Here we can use calibration */
+		res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_VMAIN].gain +
+			gpadc->cal_data[AB8500_CAL_VMAIN].offset) / AB8500_GPADC_CALIB_SCALE;
+		break;
+
+	case AB8500_GPADC_CHAN_BAT_CTRL:
+	case AB8500_GPADC_CHAN_BAT_TEMP:
+	case AB8500_GPADC_CHAN_ACC_DET_1:
+	case AB8500_GPADC_CHAN_ADC_AUX_1:
+	case AB8500_GPADC_CHAN_ADC_AUX_2:
+	case AB8500_GPADC_CHAN_XTAL_TEMP:
+		/* No calibration data available: just interpolate */
+		if (!gpadc->cal_data[AB8500_CAL_BTEMP].gain) {
+			res = AB8500_ADC_CH_BTEMP_MIN + (AB8500_ADC_CH_BTEMP_MAX -
+				AB8500_ADC_CH_BTEMP_MIN) * ad_value /
+				AB8500_ADC_RESOLUTION;
+			break;
+		}
+		/* Here we can use calibration */
+		res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_BTEMP].gain +
+			gpadc->cal_data[AB8500_CAL_BTEMP].offset) / AB8500_GPADC_CALIB_SCALE;
+		break;
+
+	case AB8500_GPADC_CHAN_VBAT_A:
+	case AB8500_GPADC_CHAN_VBAT_TRUE_MEAS:
+		/* No calibration data available: just interpolate */
+		if (!gpadc->cal_data[AB8500_CAL_VBAT].gain) {
+			res = AB8500_ADC_CH_VBAT_MIN + (AB8500_ADC_CH_VBAT_MAX -
+				AB8500_ADC_CH_VBAT_MIN) * ad_value /
+				AB8500_ADC_RESOLUTION;
+			break;
+		}
+		/* Here we can use calibration */
+		res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_VBAT].gain +
+			gpadc->cal_data[AB8500_CAL_VBAT].offset) / AB8500_GPADC_CALIB_SCALE;
+		break;
+
+	case AB8505_GPADC_CHAN_DIE_TEMP:
+		res = AB8500_ADC_CH_DIETEMP_MIN +
+			(AB8500_ADC_CH_DIETEMP_MAX - AB8500_ADC_CH_DIETEMP_MIN) * ad_value /
+			AB8500_ADC_RESOLUTION;
+		break;
+
+	case AB8500_GPADC_CHAN_ACC_DET_2:
+		res = AB8500_ADC_CH_ACCDET2_MIN +
+			(AB8500_ADC_CH_ACCDET2_MAX - AB8500_ADC_CH_ACCDET2_MIN) * ad_value /
+			AB8500_ADC_RESOLUTION;
+		break;
+
+	case AB8500_GPADC_CHAN_VBUS:
+		res = AB8500_ADC_CH_CHG_V_MIN +
+			(AB8500_ADC_CH_CHG_V_MAX - AB8500_ADC_CH_CHG_V_MIN) * ad_value /
+			AB8500_ADC_RESOLUTION;
+		break;
+
+	case AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT:
+	case AB8500_GPADC_CHAN_USB_CHARGER_CURRENT:
+		res = AB8500_ADC_CH_CHG_I_MIN +
+			(AB8500_ADC_CH_CHG_I_MAX - AB8500_ADC_CH_CHG_I_MIN) * ad_value /
+			AB8500_ADC_RESOLUTION;
+		break;
+
+	case AB8500_GPADC_CHAN_BACKUP_BAT:
+		res = AB8500_ADC_CH_BKBAT_MIN +
+			(AB8500_ADC_CH_BKBAT_MAX - AB8500_ADC_CH_BKBAT_MIN) * ad_value /
+			AB8500_ADC_RESOLUTION;
+		break;
+
+	case AB8500_GPADC_CHAN_IBAT_VIRTUAL:
+		/* No calibration data available: just interpolate */
+		if (!gpadc->cal_data[AB8500_CAL_IBAT].gain) {
+			res = AB8500_ADC_CH_IBAT_MIN + (AB8500_ADC_CH_IBAT_MAX -
+				AB8500_ADC_CH_IBAT_MIN) * ad_value /
+				AB8500_ADC_RESOLUTION;
+			break;
+		}
+		/* Here we can use calibration */
+		res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_IBAT].gain +
+				gpadc->cal_data[AB8500_CAL_IBAT].offset)
+				>> AB8500_GPADC_CALIB_SHIFT_IBAT;
+		break;
+
+	default:
+		dev_err(gpadc->dev,
+			"unknown channel ID: %d, not possible to convert\n",
+			ch);
+		res = -EINVAL;
+		break;
+
+	}
+
+	return res;
+}
+
+static int ab8500_gpadc_read(struct ab8500_gpadc *gpadc,
+			     const struct ab8500_gpadc_chan_info *ch,
+			     int *ibat)
+{
+	int ret;
+	int looplimit = 0;
+	unsigned long completion_timeout;
+	u8 val;
+	u8 low_data, high_data, low_data2, high_data2;
+	u8 ctrl1;
+	u8 ctrl23;
+	unsigned int delay_min = 0;
+	unsigned int delay_max = 0;
+	u8 data_low_addr, data_high_addr;
+
+	if (!gpadc)
+		return -ENODEV;
+
+	/* check if conversion is supported */
+	if ((gpadc->irq_sw <= 0) && !ch->hardware_control)
+		return -ENOTSUPP;
+	if ((gpadc->irq_hw <= 0) && ch->hardware_control)
+		return -ENOTSUPP;
+
+	/* Enable vddadc by grabbing PM runtime */
+	pm_runtime_get_sync(gpadc->dev);
+
+	/* Check if ADC is not busy, lock and proceed */
+	do {
+		ret = abx500_get_register_interruptible(gpadc->dev,
+			AB8500_GPADC, AB8500_GPADC_STAT_REG, &val);
+		if (ret < 0)
+			goto out;
+		if (!(val & AB8500_GPADC_STAT_BUSY))
+			break;
+		msleep(20);
+	} while (++looplimit < 10);
+	if (looplimit >= 10 && (val & AB8500_GPADC_STAT_BUSY)) {
+		dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Enable GPADC */
+	ctrl1 = AB8500_GPADC_CTRL1_ENABLE;
+
+	/* Select the channel source and set average samples */
+	switch (ch->avg_sample) {
+	case 1:
+		ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_1;
+		break;
+	case 4:
+		ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_4;
+		break;
+	case 8:
+		ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_8;
+		break;
+	default:
+		ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_16;
+		break;
+	}
+
+	if (ch->hardware_control) {
+		ret = abx500_set_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8500_GPADC_CTRL3_REG, ctrl23);
+		ctrl1 |= AB8500_GPADC_CTRL1_TRIG_ENA;
+		if (ch->falling_edge)
+			ctrl1 |= AB8500_GPADC_CTRL1_TRIG_EDGE;
+	} else {
+		ret = abx500_set_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8500_GPADC_CTRL2_REG, ctrl23);
+	}
+	if (ret < 0) {
+		dev_err(gpadc->dev,
+			"gpadc_conversion: set avg samples failed\n");
+		goto out;
+	}
+
+	/*
+	 * Enable ADC, buffering, select rising edge and enable ADC path
+	 * charging current sense if it needed, ABB 3.0 needs some special
+	 * treatment too.
+	 */
+	switch (ch->id) {
+	case AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT:
+	case AB8500_GPADC_CHAN_USB_CHARGER_CURRENT:
+		ctrl1 |= AB8500_GPADC_CTRL1_BUF_ENA |
+			AB8500_GPADC_CTRL1_ICHAR_ENA;
+		break;
+	case AB8500_GPADC_CHAN_BAT_TEMP:
+		if (!is_ab8500_2p0_or_earlier(gpadc->ab8500)) {
+			ctrl1 |= AB8500_GPADC_CTRL1_BUF_ENA |
+				AB8500_GPADC_CTRL1_BTEMP_PULL_UP;
+			/*
+			 * Delay might be needed for ABB8500 cut 3.0, if not,
+			 * remove when hardware will be available
+			 */
+			delay_min = 1000; /* Delay in micro seconds */
+			delay_max = 10000; /* large range optimises sleepmode */
+			break;
+		}
+		/* Fall through */
+	default:
+		ctrl1 |= AB8500_GPADC_CTRL1_BUF_ENA;
+		break;
+	}
+
+	/* Write configuration to control register 1 */
+	ret = abx500_set_register_interruptible(gpadc->dev,
+		AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ctrl1);
+	if (ret < 0) {
+		dev_err(gpadc->dev,
+			"gpadc_conversion: set Control register failed\n");
+		goto out;
+	}
+
+	if (delay_min != 0)
+		usleep_range(delay_min, delay_max);
+
+	if (ch->hardware_control) {
+		/* Set trigger delay timer */
+		ret = abx500_set_register_interruptible(gpadc->dev,
+			AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG,
+			ch->trig_timer);
+		if (ret < 0) {
+			dev_err(gpadc->dev,
+				"gpadc_conversion: trig timer failed\n");
+			goto out;
+		}
+		completion_timeout = 2 * HZ;
+		data_low_addr = AB8500_GPADC_AUTODATAL_REG;
+		data_high_addr = AB8500_GPADC_AUTODATAH_REG;
+	} else {
+		/* Start SW conversion */
+		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
+			AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+			AB8500_GPADC_CTRL1_START_SW_CONV,
+			AB8500_GPADC_CTRL1_START_SW_CONV);
+		if (ret < 0) {
+			dev_err(gpadc->dev,
+				"gpadc_conversion: start s/w conv failed\n");
+			goto out;
+		}
+		completion_timeout = msecs_to_jiffies(AB8500_GPADC_CONVERSION_TIME);
+		data_low_addr = AB8500_GPADC_MANDATAL_REG;
+		data_high_addr = AB8500_GPADC_MANDATAH_REG;
+	}
+
+	/* Wait for completion of conversion */
+	if (!wait_for_completion_timeout(&gpadc->complete,
+			completion_timeout)) {
+		dev_err(gpadc->dev,
+			"timeout didn't receive GPADC conv interrupt\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Read the converted RAW data */
+	ret = abx500_get_register_interruptible(gpadc->dev,
+			AB8500_GPADC, data_low_addr, &low_data);
+	if (ret < 0) {
+		dev_err(gpadc->dev,
+			"gpadc_conversion: read low data failed\n");
+		goto out;
+	}
+
+	ret = abx500_get_register_interruptible(gpadc->dev,
+		AB8500_GPADC, data_high_addr, &high_data);
+	if (ret < 0) {
+		dev_err(gpadc->dev,
+			"gpadc_conversion: read high data failed\n");
+		goto out;
+	}
+
+	/* Check if double conversion is required */
+	if ((ch->id == AB8500_GPADC_CHAN_BAT_CTRL_AND_IBAT) ||
+	    (ch->id == AB8500_GPADC_CHAN_VBAT_MEAS_AND_IBAT) ||
+	    (ch->id == AB8500_GPADC_CHAN_VBAT_TRUE_MEAS_AND_IBAT) ||
+	    (ch->id == AB8500_GPADC_CHAN_BAT_TEMP_AND_IBAT)) {
+
+		if (ch->hardware_control) {
+			/* not supported */
+			ret = -ENOTSUPP;
+			dev_err(gpadc->dev,
+				"gpadc_conversion: only SW double conversion supported\n");
+			goto out;
+		} else {
+			/* Read the converted RAW data 2 */
+			ret = abx500_get_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG,
+				&low_data2);
+			if (ret < 0) {
+				dev_err(gpadc->dev,
+					"gpadc_conversion: read sw low data 2 failed\n");
+				goto out;
+			}
+
+			ret = abx500_get_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG,
+				&high_data2);
+			if (ret < 0) {
+				dev_err(gpadc->dev,
+					"gpadc_conversion: read sw high data 2 failed\n");
+				goto out;
+			}
+			if (ibat != NULL) {
+				*ibat = (high_data2 << 8) | low_data2;
+			} else {
+				dev_warn(gpadc->dev,
+					"gpadc_conversion: ibat not stored\n");
+			}
+
+		}
+	}
+
+	/* Disable GPADC */
+	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
+		AB8500_GPADC_CTRL1_REG, AB8500_GPADC_CTRL1_DISABLE);
+	if (ret < 0) {
+		dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
+		goto out;
+	}
+
+	/* This eventually drops the regulator */
+	pm_runtime_mark_last_busy(gpadc->dev);
+	pm_runtime_put_autosuspend(gpadc->dev);
+
+	return (high_data << 8) | low_data;
+
+out:
+	/*
+	 * It has shown to be needed to turn off the GPADC if an error occurs,
+	 * otherwise we might have problem when waiting for the busy bit in the
+	 * GPADC status register to go low. In V1.1 there wait_for_completion
+	 * seems to timeout when waiting for an interrupt.. Not seen in V2.0
+	 */
+	(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
+		AB8500_GPADC_CTRL1_REG, AB8500_GPADC_CTRL1_DISABLE);
+	pm_runtime_put(gpadc->dev);
+	dev_err(gpadc->dev,
+		"gpadc_conversion: Failed to AD convert channel %d\n", ch->id);
+
+	return ret;
+}
+
+/**
+ * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion
+ * @irq: irq number
+ * @data: pointer to the data passed during request irq
+ *
+ * This is a interrupt service routine for gpadc conversion completion.
+ * Notifies the gpadc completion is completed and the converted raw value
+ * can be read from the registers.
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *data)
+{
+	struct ab8500_gpadc *gpadc = data;
+
+	complete(&gpadc->complete);
+
+	return IRQ_HANDLED;
+}
+
+static int otp_cal_regs[] = {
+	AB8500_GPADC_CAL_1,
+	AB8500_GPADC_CAL_2,
+	AB8500_GPADC_CAL_3,
+	AB8500_GPADC_CAL_4,
+	AB8500_GPADC_CAL_5,
+	AB8500_GPADC_CAL_6,
+	AB8500_GPADC_CAL_7,
+};
+
+static int otp4_cal_regs[] = {
+	AB8540_GPADC_OTP4_REG_7,
+	AB8540_GPADC_OTP4_REG_6,
+	AB8540_GPADC_OTP4_REG_5,
+};
+
+static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
+{
+	int i;
+	int ret[ARRAY_SIZE(otp_cal_regs)];
+	u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];
+	int ret_otp4[ARRAY_SIZE(otp4_cal_regs)];
+	u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)];
+	int vmain_high, vmain_low;
+	int btemp_high, btemp_low;
+	int vbat_high, vbat_low;
+	int ibat_high, ibat_low;
+	s64 V_gain, V_offset, V2A_gain, V2A_offset;
+
+	/* First we read all OTP registers and store the error code */
+	for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
+		ret[i] = abx500_get_register_interruptible(gpadc->dev,
+			AB8500_OTP_EMUL, otp_cal_regs[i],  &gpadc_cal[i]);
+		if (ret[i] < 0) {
+			/* Continue anyway: maybe the other registers are OK */
+			dev_err(gpadc->dev, "%s: read otp reg 0x%02x failed\n",
+				__func__, otp_cal_regs[i]);
+		} else {
+			/* Put this in the entropy pool as device-unique */
+			add_device_randomness(&ret[i], sizeof(ret[i]));
+		}
+	}
+
+	/*
+	 * The ADC calibration data is stored in OTP registers.
+	 * The layout of the calibration data is outlined below and a more
+	 * detailed description can be found in UM0836
+	 *
+	 * vm_h/l = vmain_high/low
+	 * bt_h/l = btemp_high/low
+	 * vb_h/l = vbat_high/low
+	 *
+	 * Data bits 8500/9540:
+	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * |						   | vm_h9 | vm_h8
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * |		   | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 *
+	 * Data bits 8540:
+	 * OTP2
+	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * |
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 *
+	 * Data bits 8540:
+	 * OTP4
+	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * |					   | ib_h9 | ib_h8 | ib_h7
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 |
+	 *
+	 *
+	 * Ideal output ADC codes corresponding to injected input voltages
+	 * during manufacturing is:
+	 *
+	 * vmain_high: Vin = 19500mV / ADC ideal code = 997
+	 * vmain_low:  Vin = 315mV   / ADC ideal code = 16
+	 * btemp_high: Vin = 1300mV  / ADC ideal code = 985
+	 * btemp_low:  Vin = 21mV    / ADC ideal code = 16
+	 * vbat_high:  Vin = 4700mV  / ADC ideal code = 982
+	 * vbat_low:   Vin = 2380mV  / ADC ideal code = 33
+	 */
+
+	if (is_ab8540(gpadc->ab8500)) {
+		/* Calculate gain and offset for VMAIN if all reads succeeded*/
+		if (!(ret[1] < 0 || ret[2] < 0)) {
+			vmain_high = (((gpadc_cal[1] & 0xFF) << 2) |
+				((gpadc_cal[2] & 0xC0) >> 6));
+			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+			gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_hi =
+				(u16)vmain_high;
+			gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_lo =
+				(u16)vmain_low;
+
+			gpadc->cal_data[AB8500_CAL_VMAIN].gain = AB8500_GPADC_CALIB_SCALE *
+				(19500 - 315) / (vmain_high - vmain_low);
+			gpadc->cal_data[AB8500_CAL_VMAIN].offset = AB8500_GPADC_CALIB_SCALE *
+				19500 - (AB8500_GPADC_CALIB_SCALE * (19500 - 315) /
+				(vmain_high - vmain_low)) * vmain_high;
+		} else {
+			gpadc->cal_data[AB8500_CAL_VMAIN].gain = 0;
+		}
+
+		/* Read IBAT calibration Data */
+		for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) {
+			ret_otp4[i] = abx500_get_register_interruptible(
+					gpadc->dev, AB8500_OTP_EMUL,
+					otp4_cal_regs[i],  &gpadc_otp4[i]);
+			if (ret_otp4[i] < 0)
+				dev_err(gpadc->dev,
+					"%s: read otp4 reg 0x%02x failed\n",
+					__func__, otp4_cal_regs[i]);
+		}
+
+		/* Calculate gain and offset for IBAT if all reads succeeded */
+		if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) {
+			ibat_high = (((gpadc_otp4[0] & 0x07) << 7) |
+				((gpadc_otp4[1] & 0xFE) >> 1));
+			ibat_low = (((gpadc_otp4[1] & 0x01) << 5) |
+				((gpadc_otp4[2] & 0xF8) >> 3));
+
+			gpadc->cal_data[AB8500_CAL_IBAT].otp_calib_hi =
+				(u16)ibat_high;
+			gpadc->cal_data[AB8500_CAL_IBAT].otp_calib_lo =
+				(u16)ibat_low;
+
+			V_gain = ((AB8500_GPADC_IBAT_VDROP_H - AB8500_GPADC_IBAT_VDROP_L)
+				<< AB8500_GPADC_CALIB_SHIFT_IBAT) / (ibat_high - ibat_low);
+
+			V_offset = (AB8500_GPADC_IBAT_VDROP_H << AB8500_GPADC_CALIB_SHIFT_IBAT) -
+				(((AB8500_GPADC_IBAT_VDROP_H - AB8500_GPADC_IBAT_VDROP_L) <<
+				AB8500_GPADC_CALIB_SHIFT_IBAT) / (ibat_high - ibat_low))
+				* ibat_high;
+			/*
+			 * Result obtained is in mV (at a scale factor),
+			 * we need to calculate gain and offset to get mA
+			 */
+			V2A_gain = (AB8500_ADC_CH_IBAT_MAX - AB8500_ADC_CH_IBAT_MIN)/
+				(AB8500_ADC_CH_IBAT_MAX_V - AB8500_ADC_CH_IBAT_MIN_V);
+			V2A_offset = ((AB8500_ADC_CH_IBAT_MAX_V * AB8500_ADC_CH_IBAT_MIN -
+				AB8500_ADC_CH_IBAT_MAX * AB8500_ADC_CH_IBAT_MIN_V)
+				<< AB8500_GPADC_CALIB_SHIFT_IBAT)
+				/ (AB8500_ADC_CH_IBAT_MAX_V - AB8500_ADC_CH_IBAT_MIN_V);
+
+			gpadc->cal_data[AB8500_CAL_IBAT].gain =
+				V_gain * V2A_gain;
+			gpadc->cal_data[AB8500_CAL_IBAT].offset =
+				V_offset * V2A_gain + V2A_offset;
+		} else {
+			gpadc->cal_data[AB8500_CAL_IBAT].gain = 0;
+		}
+	} else {
+		/* Calculate gain and offset for VMAIN if all reads succeeded */
+		if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
+			vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
+				((gpadc_cal[1] & 0x3F) << 2) |
+				((gpadc_cal[2] & 0xC0) >> 6));
+			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+			gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_hi =
+				(u16)vmain_high;
+			gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_lo =
+				(u16)vmain_low;
+
+			gpadc->cal_data[AB8500_CAL_VMAIN].gain = AB8500_GPADC_CALIB_SCALE *
+				(19500 - 315) / (vmain_high - vmain_low);
+
+			gpadc->cal_data[AB8500_CAL_VMAIN].offset = AB8500_GPADC_CALIB_SCALE *
+				19500 - (AB8500_GPADC_CALIB_SCALE * (19500 - 315) /
+				(vmain_high - vmain_low)) * vmain_high;
+		} else {
+			gpadc->cal_data[AB8500_CAL_VMAIN].gain = 0;
+		}
+	}
+
+	/* Calculate gain and offset for BTEMP if all reads succeeded */
+	if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) {
+		btemp_high = (((gpadc_cal[2] & 0x01) << 9) |
+			(gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7));
+		btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);
+
+		gpadc->cal_data[AB8500_CAL_BTEMP].otp_calib_hi = (u16)btemp_high;
+		gpadc->cal_data[AB8500_CAL_BTEMP].otp_calib_lo = (u16)btemp_low;
+
+		gpadc->cal_data[AB8500_CAL_BTEMP].gain =
+			AB8500_GPADC_CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);
+		gpadc->cal_data[AB8500_CAL_BTEMP].offset = AB8500_GPADC_CALIB_SCALE * 1300 -
+			(AB8500_GPADC_CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low))
+			* btemp_high;
+	} else {
+		gpadc->cal_data[AB8500_CAL_BTEMP].gain = 0;
+	}
+
+	/* Calculate gain and offset for VBAT if all reads succeeded */
+	if (!(ret[4] < 0 || ret[5] < 0 || ret[6] < 0)) {
+		vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]);
+		vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);
+
+		gpadc->cal_data[AB8500_CAL_VBAT].otp_calib_hi = (u16)vbat_high;
+		gpadc->cal_data[AB8500_CAL_VBAT].otp_calib_lo = (u16)vbat_low;
+
+		gpadc->cal_data[AB8500_CAL_VBAT].gain = AB8500_GPADC_CALIB_SCALE *
+			(4700 - 2380) /	(vbat_high - vbat_low);
+		gpadc->cal_data[AB8500_CAL_VBAT].offset = AB8500_GPADC_CALIB_SCALE * 4700 -
+			(AB8500_GPADC_CALIB_SCALE * (4700 - 2380) /
+			(vbat_high - vbat_low)) * vbat_high;
+	} else {
+		gpadc->cal_data[AB8500_CAL_VBAT].gain = 0;
+	}
+}
+
+static int ab8500_gpadc_read_raw(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int *val, int *val2, long mask)
+{
+	struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+	const struct ab8500_gpadc_chan_info *ch;
+	int raw_val;
+	int processed;
+
+	ch = ab8500_gpadc_get_channel(gpadc, chan->address);
+	if (!ch) {
+		dev_err(gpadc->dev, "no such channel %lu\n",
+			chan->address);
+		return -EINVAL;
+	}
+
+	raw_val = ab8500_gpadc_read(gpadc, ch, NULL);
+	if (raw_val < 0)
+		return raw_val;
+
+	if (mask == IIO_CHAN_INFO_RAW) {
+		*val = raw_val;
+		return IIO_VAL_INT;
+	}
+
+	if (mask == IIO_CHAN_INFO_PROCESSED) {
+		processed = ab8500_gpadc_ad_to_voltage(gpadc, ch->id, raw_val);
+		if (processed < 0)
+			return processed;
+
+		/* Return millivolt or milliamps or millicentigrades */
+		*val = processed * 1000;
+		return IIO_VAL_INT;
+	}
+
+	return -EINVAL;
+}
+
+static int ab8500_gpadc_of_xlate(struct iio_dev *indio_dev,
+				 const struct of_phandle_args *iiospec)
+{
+	int i;
+
+	for (i = 0; i < indio_dev->num_channels; i++)
+		if (indio_dev->channels[i].channel == iiospec->args[0])
+			return i;
+
+	return -EINVAL;
+}
+
+static const struct iio_info ab8500_gpadc_info = {
+	.of_xlate = ab8500_gpadc_of_xlate,
+	.read_raw = ab8500_gpadc_read_raw,
+};
+
+#ifdef CONFIG_PM
+static int ab8500_gpadc_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+
+	regulator_disable(gpadc->vddadc);
+
+	return 0;
+}
+
+static int ab8500_gpadc_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+	int ret;
+
+	ret = regulator_enable(gpadc->vddadc);
+	if (ret)
+		dev_err(dev, "Failed to enable vddadc: %d\n", ret);
+
+	return ret;
+}
+#endif
+
+/**
+ * ab8500_gpadc_parse_channel() - process devicetree channel configuration
+ * @dev: pointer to containing device
+ * @np: device tree node for the channel to configure
+ * @ch: channel info to fill in
+ * @iio_chan: IIO channel specification to fill in
+ *
+ * The devicetree will set up the channel for use with the specific device,
+ * and define usage for things like AUX GPADC inputs more precisely.
+ */
+static int ab8500_gpadc_parse_channel(struct device *dev,
+				      struct device_node *np,
+				      struct ab8500_gpadc_chan_info *ch,
+				      struct iio_chan_spec *iio_chan)
+{
+	const char *name = np->name;
+	u32 chan;
+	int ret;
+
+	ret = of_property_read_u32(np, "reg", &chan);
+	if (ret) {
+		dev_err(dev, "invalid channel number %s\n", name);
+		return ret;
+	}
+	if (chan > AB8500_GPADC_CHAN_BAT_TEMP_AND_IBAT) {
+		dev_err(dev, "%s channel number out of range %d\n", name, chan);
+		return -EINVAL;
+	}
+
+	iio_chan->channel = chan;
+	iio_chan->datasheet_name = name;
+	iio_chan->indexed = 1;
+	iio_chan->address = chan;
+	iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_PROCESSED);
+	/* Most are voltages (also temperatures), some are currents */
+	if ((chan == AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT) ||
+	    (chan == AB8500_GPADC_CHAN_USB_CHARGER_CURRENT))
+		iio_chan->type = IIO_CURRENT;
+	else
+		iio_chan->type = IIO_VOLTAGE;
+
+	ch->id = chan;
+
+	/* Sensible defaults */
+	ch->avg_sample = 16;
+	ch->hardware_control = false;
+	ch->falling_edge = false;
+	ch->trig_timer = 0;
+
+	return 0;
+}
+
+/**
+ * ab8500_gpadc_parse_channels() - Parse the GPADC channels from DT
+ * @gpadc: the GPADC to configure the channels for
+ * @np: device tree node containing the channel configurations
+ * @chans: the IIO channels we parsed
+ * @nchans: the number of IIO channels we parsed
+ */
+static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
+				       struct device_node *np,
+				       struct iio_chan_spec **chans_parsed,
+				       unsigned int *nchans_parsed)
+{
+	struct device_node *child;
+	struct ab8500_gpadc_chan_info *ch;
+	struct iio_chan_spec *iio_chans;
+	unsigned int nchans;
+	int i;
+
+	nchans = of_get_available_child_count(np);
+	if (!nchans) {
+		dev_err(gpadc->dev, "no channel children\n");
+		return -ENODEV;
+	}
+	dev_info(gpadc->dev, "found %d ADC channels\n", nchans);
+
+	iio_chans = devm_kcalloc(gpadc->dev, nchans,
+				 sizeof(*iio_chans), GFP_KERNEL);
+	if (!iio_chans)
+		return -ENOMEM;
+
+	gpadc->chans = devm_kcalloc(gpadc->dev, nchans,
+				    sizeof(*gpadc->chans), GFP_KERNEL);
+	if (!gpadc->chans)
+		return -ENOMEM;
+
+	i = 0;
+	for_each_available_child_of_node(np, child) {
+		struct iio_chan_spec *iio_chan;
+		int ret;
+
+		ch = &gpadc->chans[i];
+		iio_chan = &iio_chans[i];
+
+		ret = ab8500_gpadc_parse_channel(gpadc->dev, child, ch,
+						 iio_chan);
+		if (ret) {
+			of_node_put(child);
+			return ret;
+		}
+		i++;
+	}
+	gpadc->nchans = nchans;
+	*chans_parsed = iio_chans;
+	*nchans_parsed = nchans;
+
+	return 0;
+}
+
+static int ab8500_gpadc_probe(struct platform_device *pdev)
+{
+	struct ab8500_gpadc *gpadc;
+	struct iio_dev *indio_dev;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct iio_chan_spec *iio_chans;
+	unsigned int n_iio_chans;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*gpadc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, indio_dev);
+	gpadc = iio_priv(indio_dev);
+
+	gpadc->dev = dev;
+	gpadc->ab8500 = dev_get_drvdata(dev->parent);
+
+	ret = ab8500_gpadc_parse_channels(gpadc, np, &iio_chans, &n_iio_chans);
+	if (ret)
+		return ret;
+
+	gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
+	if (gpadc->irq_sw < 0) {
+		dev_err(dev, "failed to get platform sw_conv_end irq\n");
+		return gpadc->irq_sw;
+	}
+
+	gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END");
+	if (gpadc->irq_hw < 0) {
+		dev_err(dev, "failed to get platform hw_conv_end irq\n");
+		return gpadc->irq_hw;
+	}
+
+	/* Initialize completion used to notify completion of conversion */
+	init_completion(&gpadc->complete);
+
+	/* Request interrupts */
+	ret = devm_request_threaded_irq(dev, gpadc->irq_sw, NULL,
+		ab8500_bm_gpadcconvend_handler,	IRQF_NO_SUSPEND | IRQF_ONESHOT,
+		"ab8500-gpadc-sw", gpadc);
+	if (ret < 0) {
+		dev_err(dev,
+			"failed to request sw conversion irq %d\n",
+			gpadc->irq_sw);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(dev, gpadc->irq_hw, NULL,
+		ab8500_bm_gpadcconvend_handler,	IRQF_NO_SUSPEND | IRQF_ONESHOT,
+		"ab8500-gpadc-hw", gpadc);
+	if (ret < 0) {
+		dev_err(dev,
+			"Failed to request hw conversion irq: %d\n",
+			gpadc->irq_hw);
+		return ret;
+	}
+
+	/* The VTVout LDO used to power the AB8500 GPADC */
+	gpadc->vddadc = devm_regulator_get(dev, "vddadc");
+	if (IS_ERR(gpadc->vddadc)) {
+		ret = PTR_ERR(gpadc->vddadc);
+		dev_err(dev, "failed to get vddadc\n");
+		return ret;
+	}
+
+	ret = regulator_enable(gpadc->vddadc);
+	if (ret) {
+		dev_err(dev, "failed to enable vddadc: %d\n", ret);
+		return ret;
+	}
+
+	/* Enable runtime PM */
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_set_autosuspend_delay(dev, AB8500_GPADC_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(dev);
+
+	ab8500_gpadc_read_calibration_data(gpadc);
+
+	pm_runtime_put(dev);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->dev.of_node = np;
+	indio_dev->name = "ab8500-gpadc";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ab8500_gpadc_info;
+	indio_dev->channels = iio_chans;
+	indio_dev->num_channels = n_iio_chans;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		goto out_dis_pm;
+
+	return 0;
+
+out_dis_pm:
+	pm_runtime_get_sync(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+	regulator_disable(gpadc->vddadc);
+
+	return ret;
+}
+
+static int ab8500_gpadc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+
+	pm_runtime_get_sync(gpadc->dev);
+	pm_runtime_put_noidle(gpadc->dev);
+	pm_runtime_disable(gpadc->dev);
+	regulator_disable(gpadc->vddadc);
+
+	return 0;
+}
+
+static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
+			   ab8500_gpadc_runtime_resume,
+			   NULL)
+};
+
+static struct platform_driver ab8500_gpadc_driver = {
+	.probe = ab8500_gpadc_probe,
+	.remove = ab8500_gpadc_remove,
+	.driver = {
+		.name = "ab8500-gpadc",
+		.pm = &ab8500_gpadc_pm_ops,
+	},
+};
+builtin_platform_driver(ab8500_gpadc_driver);
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index a2837a0e7cba..e1850f3d5cf3 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -1483,7 +1483,7 @@ dma_free_area:
 			  st->dma_st.rx_buf, st->dma_st.rx_dma_buf);
 dma_chan_disable:
 	dma_release_channel(st->dma_st.dma_chan);
-	st->dma_st.dma_chan = 0;
+	st->dma_st.dma_chan = NULL;
 dma_exit:
 	dev_info(&pdev->dev, "continuing without DMA support\n");
 }
@@ -1506,7 +1506,7 @@ static void at91_adc_dma_disable(struct platform_device *pdev)
 	dma_free_coherent(st->dma_st.dma_chan->device->dev, pages * PAGE_SIZE,
 			  st->dma_st.rx_buf, st->dma_st.rx_dma_buf);
 	dma_release_channel(st->dma_st.dma_chan);
-	st->dma_st.dma_chan = 0;
+	st->dma_st.dma_chan = NULL;
 
 	dev_info(&pdev->dev, "continuing without DMA support\n");
 }
diff --git a/drivers/iio/adc/cpcap-adc.c b/drivers/iio/adc/cpcap-adc.c
index 2d616cafe75f..5086a337f4c9 100644
--- a/drivers/iio/adc/cpcap-adc.c
+++ b/drivers/iio/adc/cpcap-adc.c
@@ -1008,7 +1008,7 @@ static int cpcap_adc_probe(struct platform_device *pdev)
 
 	error = devm_request_threaded_irq(&pdev->dev, ddata->irq, NULL,
 					  cpcap_adc_irq_thread,
-					  IRQF_TRIGGER_NONE,
+					  IRQF_TRIGGER_NONE | IRQF_ONESHOT,
 					  "cpcap-adc", indio_dev);
 	if (error) {
 		dev_err(&pdev->dev, "could not get irq: %i\n",
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 42a3ced11fbd..2df7d057b249 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -651,7 +651,7 @@ static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
 		input_sync(info->input);
 
 		usleep_range(1000, 1100);
-	};
+	}
 
 	writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
 
@@ -769,7 +769,6 @@ static int exynos_adc_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
 	struct iio_dev *indio_dev = NULL;
-	struct resource	*mem;
 	bool has_ts = false;
 	int ret = -ENODEV;
 	int irq;
@@ -788,8 +787,7 @@ static int exynos_adc_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	info->regs = devm_ioremap_resource(&pdev->dev, mem);
+	info->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(info->regs))
 		return PTR_ERR(info->regs);
 
diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
index 62e6c8badd22..c8686558429b 100644
--- a/drivers/iio/adc/hx711.c
+++ b/drivers/iio/adc/hx711.c
@@ -23,6 +23,7 @@
 
 /* gain to pulse and scale conversion */
 #define HX711_GAIN_MAX		3
+#define HX711_RESET_GAIN	128
 
 struct hx711_gain_to_scale {
 	int			gain;
@@ -185,8 +186,7 @@ static int hx711_wait_for_ready(struct hx711_data *hx711_data)
 
 static int hx711_reset(struct hx711_data *hx711_data)
 {
-	int ret;
-	int val = gpiod_get_value(hx711_data->gpiod_dout);
+	int val = hx711_wait_for_ready(hx711_data);
 
 	if (val) {
 		/*
@@ -202,22 +202,10 @@ static int hx711_reset(struct hx711_data *hx711_data)
 		msleep(10);
 		gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
 
-		ret = hx711_wait_for_ready(hx711_data);
-		if (ret)
-			return ret;
-		/*
-		 * after a reset the gain is 128 so we do a dummy read
-		 * to set the gain for the next read
-		 */
-		ret = hx711_read(hx711_data);
-		if (ret < 0)
-			return ret;
-
-		/*
-		 * after a dummy read we need to wait vor readiness
-		 * for not mixing gain pulses with the clock
-		 */
 		val = hx711_wait_for_ready(hx711_data);
+
+		/* after a reset the gain is 128 */
+		hx711_data->gain_set = HX711_RESET_GAIN;
 	}
 
 	return val;
diff --git a/drivers/iio/adc/intel_mrfld_adc.c b/drivers/iio/adc/intel_mrfld_adc.c
new file mode 100644
index 000000000000..67d096f8180d
--- /dev/null
+++ b/drivers/iio/adc/intel_mrfld_adc.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADC driver for Basin Cove PMIC
+ *
+ * Copyright (C) 2012 Intel Corporation
+ * Author: Bin Yang <bin.yang@intel.com>
+ *
+ * Rewritten for upstream by:
+ *	 Vincent Pelletier <plr.vincent@gmail.com>
+ *	 Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/mfd/intel_soc_pmic_mrfld.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/driver.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+
+#include <asm/unaligned.h>
+
+#define BCOVE_GPADCREQ			0xDC
+#define BCOVE_GPADCREQ_BUSY		BIT(0)
+#define BCOVE_GPADCREQ_IRQEN		BIT(1)
+
+#define BCOVE_ADCIRQ_ALL (		\
+	BCOVE_ADCIRQ_BATTEMP |		\
+	BCOVE_ADCIRQ_SYSTEMP |		\
+	BCOVE_ADCIRQ_BATTID |		\
+	BCOVE_ADCIRQ_VIBATT |		\
+	BCOVE_ADCIRQ_CCTICK)
+
+#define BCOVE_ADC_TIMEOUT		msecs_to_jiffies(1000)
+
+static const u8 mrfld_adc_requests[] = {
+	BCOVE_ADCIRQ_VIBATT,
+	BCOVE_ADCIRQ_BATTID,
+	BCOVE_ADCIRQ_VIBATT,
+	BCOVE_ADCIRQ_SYSTEMP,
+	BCOVE_ADCIRQ_BATTEMP,
+	BCOVE_ADCIRQ_BATTEMP,
+	BCOVE_ADCIRQ_SYSTEMP,
+	BCOVE_ADCIRQ_SYSTEMP,
+	BCOVE_ADCIRQ_SYSTEMP,
+};
+
+struct mrfld_adc {
+	struct regmap *regmap;
+	struct completion completion;
+	/* Lock to protect the IPC transfers */
+	struct mutex lock;
+};
+
+static irqreturn_t mrfld_adc_thread_isr(int irq, void *data)
+{
+	struct iio_dev *indio_dev = data;
+	struct mrfld_adc *adc = iio_priv(indio_dev);
+
+	complete(&adc->completion);
+	return IRQ_HANDLED;
+}
+
+static int mrfld_adc_single_conv(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int *result)
+{
+	struct mrfld_adc *adc = iio_priv(indio_dev);
+	struct regmap *regmap = adc->regmap;
+	unsigned int req;
+	long timeout;
+	u8 buf[2];
+	int ret;
+
+	reinit_completion(&adc->completion);
+
+	regmap_update_bits(regmap, BCOVE_MADCIRQ, BCOVE_ADCIRQ_ALL, 0);
+	regmap_update_bits(regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_ADC, 0);
+
+	ret = regmap_read_poll_timeout(regmap, BCOVE_GPADCREQ, req,
+				       !(req & BCOVE_GPADCREQ_BUSY),
+				       2000, 1000000);
+	if (ret)
+		goto done;
+
+	req = mrfld_adc_requests[chan->channel];
+	ret = regmap_write(regmap, BCOVE_GPADCREQ, BCOVE_GPADCREQ_IRQEN | req);
+	if (ret)
+		goto done;
+
+	timeout = wait_for_completion_interruptible_timeout(&adc->completion,
+							    BCOVE_ADC_TIMEOUT);
+	if (timeout < 0) {
+		ret = timeout;
+		goto done;
+	}
+	if (timeout == 0) {
+		ret = -ETIMEDOUT;
+		goto done;
+	}
+
+	ret = regmap_bulk_read(regmap, chan->address, buf, 2);
+	if (ret)
+		goto done;
+
+	*result = get_unaligned_be16(buf);
+	ret = IIO_VAL_INT;
+
+done:
+	regmap_update_bits(regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_ADC, 0xff);
+	regmap_update_bits(regmap, BCOVE_MADCIRQ, BCOVE_ADCIRQ_ALL, 0xff);
+
+	return ret;
+}
+
+static int mrfld_adc_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2, long mask)
+{
+	struct mrfld_adc *adc = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		ret = mrfld_adc_single_conv(indio_dev, chan, val);
+		mutex_unlock(&adc->lock);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info mrfld_adc_iio_info = {
+	.read_raw = &mrfld_adc_read_raw,
+};
+
+#define BCOVE_ADC_CHANNEL(_type, _channel, _datasheet_name, _address)	\
+	{								\
+		.indexed = 1,						\
+		.type = _type,						\
+		.channel = _channel,					\
+		.address = _address,					\
+		.datasheet_name = _datasheet_name,			\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	}
+
+static const struct iio_chan_spec mrfld_adc_channels[] = {
+	BCOVE_ADC_CHANNEL(IIO_VOLTAGE,    0, "CH0", 0xE9),
+	BCOVE_ADC_CHANNEL(IIO_RESISTANCE, 1, "CH1", 0xEB),
+	BCOVE_ADC_CHANNEL(IIO_CURRENT,    2, "CH2", 0xED),
+	BCOVE_ADC_CHANNEL(IIO_TEMP,       3, "CH3", 0xCC),
+	BCOVE_ADC_CHANNEL(IIO_TEMP,       4, "CH4", 0xC8),
+	BCOVE_ADC_CHANNEL(IIO_TEMP,       5, "CH5", 0xCA),
+	BCOVE_ADC_CHANNEL(IIO_TEMP,       6, "CH6", 0xC2),
+	BCOVE_ADC_CHANNEL(IIO_TEMP,       7, "CH7", 0xC4),
+	BCOVE_ADC_CHANNEL(IIO_TEMP,       8, "CH8", 0xC6),
+};
+
+static struct iio_map iio_maps[] = {
+	IIO_MAP("CH0", "bcove-battery", "VBATRSLT"),
+	IIO_MAP("CH1", "bcove-battery", "BATTID"),
+	IIO_MAP("CH2", "bcove-battery", "IBATRSLT"),
+	IIO_MAP("CH3", "bcove-temp",    "PMICTEMP"),
+	IIO_MAP("CH4", "bcove-temp",    "BATTEMP0"),
+	IIO_MAP("CH5", "bcove-temp",    "BATTEMP1"),
+	IIO_MAP("CH6", "bcove-temp",    "SYSTEMP0"),
+	IIO_MAP("CH7", "bcove-temp",    "SYSTEMP1"),
+	IIO_MAP("CH8", "bcove-temp",    "SYSTEMP2"),
+	{}
+};
+
+static int mrfld_adc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
+	struct iio_dev *indio_dev;
+	struct mrfld_adc *adc;
+	int irq;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*indio_dev));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+
+	mutex_init(&adc->lock);
+	init_completion(&adc->completion);
+	adc->regmap = pmic->regmap;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_threaded_irq(dev, irq, NULL, mrfld_adc_thread_isr,
+					IRQF_ONESHOT | IRQF_SHARED, pdev->name,
+					indio_dev);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->name = pdev->name;
+
+	indio_dev->channels = mrfld_adc_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mrfld_adc_channels);
+	indio_dev->info = &mrfld_adc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = iio_map_array_register(indio_dev, iio_maps);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret < 0)
+		goto err_array_unregister;
+
+	return 0;
+
+err_array_unregister:
+	iio_map_array_unregister(indio_dev);
+	return ret;
+}
+
+static int mrfld_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	iio_map_array_unregister(indio_dev);
+
+	return 0;
+}
+
+static const struct platform_device_id mrfld_adc_id_table[] = {
+	{ .name = "mrfld_bcove_adc" },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, mrfld_adc_id_table);
+
+static struct platform_driver mrfld_adc_driver = {
+	.driver = {
+		.name = "mrfld_bcove_adc",
+	},
+	.probe = mrfld_adc_probe,
+	.remove = mrfld_adc_remove,
+	.id_table = mrfld_adc_id_table,
+};
+module_platform_driver(mrfld_adc_driver);
+
+MODULE_AUTHOR("Bin Yang <bin.yang@intel.com>");
+MODULE_AUTHOR("Vincent Pelletier <plr.vincent@gmail.com>");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_DESCRIPTION("ADC driver for Basin Cove PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index 214883458582..e171db20c04a 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -63,12 +63,18 @@ enum max1027_id {
 	max1027,
 	max1029,
 	max1031,
+	max1227,
+	max1229,
+	max1231,
 };
 
 static const struct spi_device_id max1027_id[] = {
 	{"max1027", max1027},
 	{"max1029", max1029},
 	{"max1031", max1031},
+	{"max1227", max1227},
+	{"max1229", max1229},
+	{"max1231", max1231},
 	{}
 };
 MODULE_DEVICE_TABLE(spi, max1027_id);
@@ -78,12 +84,15 @@ static const struct of_device_id max1027_adc_dt_ids[] = {
 	{ .compatible = "maxim,max1027" },
 	{ .compatible = "maxim,max1029" },
 	{ .compatible = "maxim,max1031" },
+	{ .compatible = "maxim,max1227" },
+	{ .compatible = "maxim,max1229" },
+	{ .compatible = "maxim,max1231" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids);
 #endif
 
-#define MAX1027_V_CHAN(index)						\
+#define MAX1027_V_CHAN(index, depth)					\
 	{								\
 		.type = IIO_VOLTAGE,					\
 		.indexed = 1,						\
@@ -93,7 +102,7 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids);
 		.scan_index = index + 1,				\
 		.scan_type = {						\
 			.sign = 'u',					\
-			.realbits = 10,					\
+			.realbits = depth,				\
 			.storagebits = 16,				\
 			.shift = 2,					\
 			.endianness = IIO_BE,				\
@@ -115,52 +124,54 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids);
 		},							\
 	}
 
+#define MAX1X27_CHANNELS(depth)			\
+	MAX1027_T_CHAN,				\
+	MAX1027_V_CHAN(0, depth),		\
+	MAX1027_V_CHAN(1, depth),		\
+	MAX1027_V_CHAN(2, depth),		\
+	MAX1027_V_CHAN(3, depth),		\
+	MAX1027_V_CHAN(4, depth),		\
+	MAX1027_V_CHAN(5, depth),		\
+	MAX1027_V_CHAN(6, depth),		\
+	MAX1027_V_CHAN(7, depth)
+
+#define MAX1X29_CHANNELS(depth)			\
+	MAX1X27_CHANNELS(depth),		\
+	MAX1027_V_CHAN(8, depth),		\
+	MAX1027_V_CHAN(9, depth),		\
+	MAX1027_V_CHAN(10, depth),		\
+	MAX1027_V_CHAN(11, depth)
+
+#define MAX1X31_CHANNELS(depth)			\
+	MAX1X27_CHANNELS(depth),		\
+	MAX1X29_CHANNELS(depth),		\
+	MAX1027_V_CHAN(12, depth),		\
+	MAX1027_V_CHAN(13, depth),		\
+	MAX1027_V_CHAN(14, depth),		\
+	MAX1027_V_CHAN(15, depth)
+
 static const struct iio_chan_spec max1027_channels[] = {
-	MAX1027_T_CHAN,
-	MAX1027_V_CHAN(0),
-	MAX1027_V_CHAN(1),
-	MAX1027_V_CHAN(2),
-	MAX1027_V_CHAN(3),
-	MAX1027_V_CHAN(4),
-	MAX1027_V_CHAN(5),
-	MAX1027_V_CHAN(6),
-	MAX1027_V_CHAN(7)
+	MAX1X27_CHANNELS(10),
 };
 
 static const struct iio_chan_spec max1029_channels[] = {
-	MAX1027_T_CHAN,
-	MAX1027_V_CHAN(0),
-	MAX1027_V_CHAN(1),
-	MAX1027_V_CHAN(2),
-	MAX1027_V_CHAN(3),
-	MAX1027_V_CHAN(4),
-	MAX1027_V_CHAN(5),
-	MAX1027_V_CHAN(6),
-	MAX1027_V_CHAN(7),
-	MAX1027_V_CHAN(8),
-	MAX1027_V_CHAN(9),
-	MAX1027_V_CHAN(10),
-	MAX1027_V_CHAN(11)
+	MAX1X29_CHANNELS(10),
 };
 
 static const struct iio_chan_spec max1031_channels[] = {
-	MAX1027_T_CHAN,
-	MAX1027_V_CHAN(0),
-	MAX1027_V_CHAN(1),
-	MAX1027_V_CHAN(2),
-	MAX1027_V_CHAN(3),
-	MAX1027_V_CHAN(4),
-	MAX1027_V_CHAN(5),
-	MAX1027_V_CHAN(6),
-	MAX1027_V_CHAN(7),
-	MAX1027_V_CHAN(8),
-	MAX1027_V_CHAN(9),
-	MAX1027_V_CHAN(10),
-	MAX1027_V_CHAN(11),
-	MAX1027_V_CHAN(12),
-	MAX1027_V_CHAN(13),
-	MAX1027_V_CHAN(14),
-	MAX1027_V_CHAN(15)
+	MAX1X31_CHANNELS(10),
+};
+
+static const struct iio_chan_spec max1227_channels[] = {
+	MAX1X27_CHANNELS(12),
+};
+
+static const struct iio_chan_spec max1229_channels[] = {
+	MAX1X29_CHANNELS(12),
+};
+
+static const struct iio_chan_spec max1231_channels[] = {
+	MAX1X31_CHANNELS(12),
 };
 
 static const unsigned long max1027_available_scan_masks[] = {
@@ -200,6 +211,21 @@ static const struct max1027_chip_info max1027_chip_info_tbl[] = {
 		.num_channels = ARRAY_SIZE(max1031_channels),
 		.available_scan_masks = max1031_available_scan_masks,
 	},
+	[max1227] = {
+		.channels = max1227_channels,
+		.num_channels = ARRAY_SIZE(max1227_channels),
+		.available_scan_masks = max1027_available_scan_masks,
+	},
+	[max1229] = {
+		.channels = max1229_channels,
+		.num_channels = ARRAY_SIZE(max1229_channels),
+		.available_scan_masks = max1029_available_scan_masks,
+	},
+	[max1231] = {
+		.channels = max1231_channels,
+		.num_channels = ARRAY_SIZE(max1231_channels),
+		.available_scan_masks = max1031_available_scan_masks,
+	},
 };
 
 struct max1027_state {
@@ -284,7 +310,7 @@ static int max1027_read_raw(struct iio_dev *indio_dev,
 			break;
 		case IIO_VOLTAGE:
 			*val = 2500;
-			*val2 = 10;
+			*val2 = chan->scan_type.realbits;
 			ret = IIO_VAL_FRACTIONAL_LOG2;
 			break;
 		default:
@@ -309,8 +335,11 @@ static int max1027_debugfs_reg_access(struct iio_dev *indio_dev,
 	struct max1027_state *st = iio_priv(indio_dev);
 	u8 *val = (u8 *)st->buffer;
 
-	if (readval != NULL)
-		return -EINVAL;
+	if (readval) {
+		int ret = spi_read(st->spi, val, 2);
+		*readval = be16_to_cpu(st->buffer[0]);
+		return ret;
+	}
 
 	*val = (u8)writeval;
 	return spi_write(st->spi, val, 1);
@@ -427,34 +456,47 @@ static int max1027_probe(struct spi_device *spi)
 		return -ENOMEM;
 	}
 
-	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
-					&iio_pollfunc_store_time,
-					&max1027_trigger_handler, NULL);
-	if (ret < 0) {
-		dev_err(&indio_dev->dev, "Failed to setup buffer\n");
-		return ret;
-	}
+	if (spi->irq) {
+		ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+						      &iio_pollfunc_store_time,
+						      &max1027_trigger_handler,
+						      NULL);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev, "Failed to setup buffer\n");
+			return ret;
+		}
 
-	st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-trigger",
-							indio_dev->name);
-	if (st->trig == NULL) {
-		ret = -ENOMEM;
-		dev_err(&indio_dev->dev, "Failed to allocate iio trigger\n");
-		return ret;
-	}
+		st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-trigger",
+						  indio_dev->name);
+		if (st->trig == NULL) {
+			ret = -ENOMEM;
+			dev_err(&indio_dev->dev,
+				"Failed to allocate iio trigger\n");
+			return ret;
+		}
 
-	st->trig->ops = &max1027_trigger_ops;
-	st->trig->dev.parent = &spi->dev;
-	iio_trigger_set_drvdata(st->trig, indio_dev);
-	iio_trigger_register(st->trig);
+		st->trig->ops = &max1027_trigger_ops;
+		st->trig->dev.parent = &spi->dev;
+		iio_trigger_set_drvdata(st->trig, indio_dev);
+		iio_trigger_register(st->trig);
+
+		ret = devm_request_threaded_irq(&spi->dev, spi->irq,
+						iio_trigger_generic_data_rdy_poll,
+						NULL,
+						IRQF_TRIGGER_FALLING,
+						spi->dev.driver->name,
+						st->trig);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev, "Failed to allocate IRQ.\n");
+			return ret;
+		}
+	}
 
-	ret = devm_request_threaded_irq(&spi->dev, spi->irq,
-					iio_trigger_generic_data_rdy_poll,
-					NULL,
-					IRQF_TRIGGER_FALLING,
-					spi->dev.driver->name, st->trig);
+	/* Internal reset */
+	st->reg = MAX1027_RST_REG;
+	ret = spi_write(st->spi, &st->reg, 1);
 	if (ret < 0) {
-		dev_err(&indio_dev->dev, "Failed to allocate IRQ.\n");
+		dev_err(&indio_dev->dev, "Failed to reset the ADC\n");
 		return ret;
 	}
 
@@ -480,5 +522,5 @@ static struct spi_driver max1027_driver = {
 module_spi_driver(max1027_driver);
 
 MODULE_AUTHOR("Philippe Reynes <tremyfr@yahoo.fr>");
-MODULE_DESCRIPTION("MAX1027/MAX1029/MAX1031 ADC");
+MODULE_DESCRIPTION("MAX1X27/MAX1X29/MAX1X31 ADC");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index 38bf10085696..465c7625a55a 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -164,7 +164,7 @@ static int mcp320x_adc_conversion(struct mcp320x *adc, u8 channel,
 	case mcp3550_60:
 	case mcp3551:
 	case mcp3553: {
-		u32 raw = be32_to_cpup((u32 *)adc->rx_buf);
+		u32 raw = be32_to_cpup((__be32 *)adc->rx_buf);
 
 		if (!(adc->spi->mode & SPI_CPOL))
 			raw <<= 1; /* strip Data Ready bit in SPI mode 0,0 */
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 7b27306330a3..22a470db9ef8 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -1187,7 +1187,6 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	const struct meson_sar_adc_data *match_data;
 	struct meson_sar_adc_priv *priv;
 	struct iio_dev *indio_dev;
-	struct resource *res;
 	void __iomem *base;
 	int irq, ret;
 
@@ -1214,8 +1213,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &meson_sar_adc_iio_info;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 93a096a91f8c..20c626c289ed 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -38,12 +38,12 @@
 #define HAS_ANASWVDD		BIT(1)
 
 /**
- * stm32_adc_common_regs - stm32 common registers, compatible dependent data
+ * struct stm32_adc_common_regs - stm32 common registers
  * @csr:	common status register offset
  * @ccr:	common control register offset
- * @eoc1:	adc1 end of conversion flag in @csr
- * @eoc2:	adc2 end of conversion flag in @csr
- * @eoc3:	adc3 end of conversion flag in @csr
+ * @eoc1_msk:	adc1 end of conversion flag in @csr
+ * @eoc2_msk:	adc2 end of conversion flag in @csr
+ * @eoc3_msk:	adc3 end of conversion flag in @csr
  * @ier:	interrupt enable register offset for each adc
  * @eocie_msk:	end of conversion interrupt enable mask in @ier
  */
@@ -60,7 +60,7 @@ struct stm32_adc_common_regs {
 struct stm32_adc_priv;
 
 /**
- * stm32_adc_priv_cfg - stm32 core compatible configuration data
+ * struct stm32_adc_priv_cfg - stm32 core compatible configuration data
  * @regs:	common registers for all instances
  * @clk_sel:	clock selection routine
  * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
@@ -117,6 +117,7 @@ static int stm32f4_pclk_div[] = {2, 4, 6, 8};
 
 /**
  * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
+ * @pdev: platform device
  * @priv: stm32 ADC core private data
  * Select clock prescaler used for analog conversions, before using ADC.
  */
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 663f8a5012d6..76a247ba876f 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -102,7 +102,7 @@ struct stm32_adc_calib {
 };
 
 /**
- * stm32_adc_regs - stm32 ADC misc registers & bitfield desc
+ * struct stm32_adc_regs - stm32 ADC misc registers & bitfield desc
  * @reg:		register offset
  * @mask:		bitfield mask
  * @shift:		left shift
@@ -114,7 +114,7 @@ struct stm32_adc_regs {
 };
 
 /**
- * stm32_adc_regspec - stm32 registers definition, compatible dependent data
+ * struct stm32_adc_regspec - stm32 registers definition
  * @dr:			data register offset
  * @ier_eoc:		interrupt enable register & eocie bitfield
  * @isr_eoc:		interrupt status register & eoc bitfield
@@ -140,7 +140,7 @@ struct stm32_adc_regspec {
 struct stm32_adc;
 
 /**
- * stm32_adc_cfg - stm32 compatible configuration data
+ * struct stm32_adc_cfg - stm32 compatible configuration data
  * @regs:		registers descriptions
  * @adc_info:		per instance input channels definitions
  * @trigs:		external trigger sources
@@ -183,8 +183,8 @@ struct stm32_adc_cfg {
  * @rx_buf:		dma rx buffer cpu address
  * @rx_dma_buf:		dma rx buffer bus address
  * @rx_buf_sz:		dma rx buffer size
- * @difsel		bitmask to set single-ended/differential channel
- * @pcsel		bitmask to preselect channels on some devices
+ * @difsel:		bitmask to set single-ended/differential channel
+ * @pcsel:		bitmask to preselect channels on some devices
  * @smpr_val:		sampling time settings (e.g. smpr1 / smpr2)
  * @cal:		optional calibration data on some devices
  * @chan_name:		channel name array
@@ -254,7 +254,7 @@ static const struct stm32_adc_info stm32h7_adc_info = {
 	.num_res = ARRAY_SIZE(stm32h7_adc_resolutions),
 };
 
-/**
+/*
  * stm32f4_sq - describe regular sequence registers
  * - L: sequence len (register & bit field)
  * - SQ1..SQ16: sequence entries (register & bit field)
@@ -301,7 +301,7 @@ static struct stm32_adc_trig_info stm32f4_adc_trigs[] = {
 	{}, /* sentinel */
 };
 
-/**
+/*
  * stm32f4_smp_bits[] - describe sampling time register index & bit fields
  * Sorted so it can be indexed by channel number.
  */
@@ -392,7 +392,7 @@ static struct stm32_adc_trig_info stm32h7_adc_trigs[] = {
 	{},
 };
 
-/**
+/*
  * stm32h7_smp_bits - describe sampling time register index & bit fields
  * Sorted so it can be indexed by channel number.
  */
@@ -994,6 +994,7 @@ static int stm32_adc_conf_scan_seq(struct iio_dev *indio_dev,
 
 /**
  * stm32_adc_get_trig_extsel() - Get external trigger selection
+ * @indio_dev: IIO device structure
  * @trig: trigger
  *
  * Returns trigger extsel value, if trig matches, -EINVAL otherwise.
@@ -1297,6 +1298,10 @@ static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
 
 /**
  * stm32_adc_debugfs_reg_access - read or write register value
+ * @indio_dev: IIO device structure
+ * @reg: register offset
+ * @writeval: value to write
+ * @readval: value to read
  *
  * To read a value from an ADC register:
  *   echo [ADC reg offset] > direct_reg_access
diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
index bd72727fc417..0f88048ea48f 100644
--- a/drivers/iio/adc/stmpe-adc.c
+++ b/drivers/iio/adc/stmpe-adc.c
@@ -175,7 +175,7 @@ static int stmpe_read_raw(struct iio_dev *indio_dev,
 static irqreturn_t stmpe_adc_isr(int irq, void *dev_id)
 {
 	struct stmpe_adc *info = (struct stmpe_adc *)dev_id;
-	u16 data;
+	__be16 data;
 
 	if (info->channel <= STMPE_ADC_LAST_NR) {
 		int int_sta;
diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c
index 55c5119fe575..472b08f37fea 100644
--- a/drivers/iio/adc/twl4030-madc.c
+++ b/drivers/iio/adc/twl4030-madc.c
@@ -495,7 +495,7 @@ static irqreturn_t twl4030_madc_threaded_irq_handler(int irq, void *_madc)
 		ret = twl4030_madc_disable_irq(madc, i);
 		if (ret < 0)
 			dev_dbg(madc->dev, "Disable interrupt failed %d\n", i);
-		madc->requests[i].result_pending = 1;
+		madc->requests[i].result_pending = true;
 	}
 	for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
 		r = &madc->requests[i];
@@ -507,8 +507,8 @@ static irqreturn_t twl4030_madc_threaded_irq_handler(int irq, void *_madc)
 		len = twl4030_madc_read_channels(madc, method->rbase,
 						 r->channels, r->rbuf, r->raw);
 		/* Free request */
-		r->result_pending = 0;
-		r->active = 0;
+		r->result_pending = false;
+		r->active = false;
 	}
 	mutex_unlock(&madc->lock);
 
@@ -521,15 +521,15 @@ err_i2c:
 	 */
 	for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
 		r = &madc->requests[i];
-		if (r->active == 0)
+		if (!r->active)
 			continue;
 		method = &twl4030_conversion_methods[r->method];
 		/* Read results */
 		len = twl4030_madc_read_channels(madc, method->rbase,
 						 r->channels, r->rbuf, r->raw);
 		/* Free request */
-		r->result_pending = 0;
-		r->active = 0;
+		r->result_pending = false;
+		r->active = false;
 	}
 	mutex_unlock(&madc->lock);
 
@@ -652,16 +652,16 @@ static int twl4030_madc_conversion(struct twl4030_madc_request *req)
 	ret = twl4030_madc_start_conversion(twl4030_madc, req->method);
 	if (ret < 0)
 		goto out;
-	twl4030_madc->requests[req->method].active = 1;
+	twl4030_madc->requests[req->method].active = true;
 	/* Wait until conversion is ready (ctrl register returns EOC) */
 	ret = twl4030_madc_wait_conversion_ready(twl4030_madc, 5, method->ctrl);
 	if (ret) {
-		twl4030_madc->requests[req->method].active = 0;
+		twl4030_madc->requests[req->method].active = false;
 		goto out;
 	}
 	ret = twl4030_madc_read_channels(twl4030_madc, method->rbase,
 					 req->channels, req->rbuf, req->raw);
-	twl4030_madc->requests[req->method].active = 0;
+	twl4030_madc->requests[req->method].active = false;
 
 out:
 	mutex_unlock(&twl4030_madc->lock);
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 4fd389678dba..ec227b358cd6 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1150,7 +1150,6 @@ static int xadc_probe(struct platform_device *pdev)
 	const struct of_device_id *id;
 	struct iio_dev *indio_dev;
 	unsigned int bipolar_mask;
-	struct resource *mem;
 	unsigned int conf0;
 	struct xadc *xadc;
 	int ret;
@@ -1180,8 +1179,7 @@ static int xadc_probe(struct platform_device *pdev)
 	spin_lock_init(&xadc->lock);
 	INIT_DELAYED_WORK(&xadc->zynq_unmask_work, xadc_zynq_unmask_worker);
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	xadc->base = devm_ioremap_resource(&pdev->dev, mem);
+	xadc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(xadc->base))
 		return PTR_ERR(xadc->base);
 
diff --git a/drivers/iio/chemical/sgp30.c b/drivers/iio/chemical/sgp30.c
index 8cc8fe5e356d..403e8803471a 100644
--- a/drivers/iio/chemical/sgp30.c
+++ b/drivers/iio/chemical/sgp30.c
@@ -483,7 +483,7 @@ static void sgp_init(struct sgp_data *data)
 		data->iaq_defval_skip_jiffies =
 			43 * data->measure_interval_jiffies;
 		break;
-	};
+	}
 }
 
 static const struct iio_info sgp_info = {
diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c
index edbb956e81e8..acb9f8ecbb3d 100644
--- a/drivers/iio/chemical/sps30.c
+++ b/drivers/iio/chemical/sps30.c
@@ -117,7 +117,7 @@ static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size)
 		break;
 	case SPS30_READ_AUTO_CLEANING_PERIOD:
 		buf[0] = SPS30_AUTO_CLEANING_PERIOD >> 8;
-		buf[1] = (u8)SPS30_AUTO_CLEANING_PERIOD;
+		buf[1] = (u8)(SPS30_AUTO_CLEANING_PERIOD & 0xff);
 		/* fall through */
 	case SPS30_READ_DATA_READY_FLAG:
 	case SPS30_READ_DATA:
diff --git a/drivers/iio/dac/ad7303.c b/drivers/iio/dac/ad7303.c
index 8de9f40226e6..14bbac6bee98 100644
--- a/drivers/iio/dac/ad7303.c
+++ b/drivers/iio/dac/ad7303.c
@@ -41,6 +41,7 @@ struct ad7303_state {
 	struct regulator *vdd_reg;
 	struct regulator *vref_reg;
 
+	struct mutex lock;
 	/*
 	 * DMA (thus cache coherency maintenance) requires the
 	 * transfer buffers to live in their own cache lines.
@@ -79,7 +80,7 @@ static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev,
 	if (ret)
 		return ret;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->lock);
 
 	if (pwr_down)
 		st->config |= AD7303_CFG_POWER_DOWN(chan->channel);
@@ -90,7 +91,7 @@ static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev,
 	 * mode, so just write one of the DAC channels again */
 	ad7303_write(st, chan->channel, st->dac_cache[chan->channel]);
 
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
 	return len;
 }
 
@@ -116,7 +117,9 @@ static int ad7303_read_raw(struct iio_dev *indio_dev,
 
 	switch (info) {
 	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&st->lock);
 		*val = st->dac_cache[chan->channel];
+		mutex_unlock(&st->lock);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		vref_uv = ad7303_get_vref(st, chan);
@@ -144,11 +147,11 @@ static int ad7303_write_raw(struct iio_dev *indio_dev,
 		if (val >= (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
-		mutex_lock(&indio_dev->mlock);
+		mutex_lock(&st->lock);
 		ret = ad7303_write(st, chan->address, val);
 		if (ret == 0)
 			st->dac_cache[chan->channel] = val;
-		mutex_unlock(&indio_dev->mlock);
+		mutex_unlock(&st->lock);
 		break;
 	default:
 		ret = -EINVAL;
@@ -211,6 +214,8 @@ static int ad7303_probe(struct spi_device *spi)
 
 	st->spi = spi;
 
+	mutex_init(&st->lock);
+
 	st->vdd_reg = devm_regulator_get(&spi->dev, "Vdd");
 	if (IS_ERR(st->vdd_reg))
 		return PTR_ERR(st->vdd_reg);
diff --git a/drivers/iio/dac/stm32-dac-core.c b/drivers/iio/dac/stm32-dac-core.c
index d0fb3124de07..9e6b4cd0a5cc 100644
--- a/drivers/iio/dac/stm32-dac-core.c
+++ b/drivers/iio/dac/stm32-dac-core.c
@@ -11,6 +11,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
@@ -50,6 +51,41 @@ static const struct regmap_config stm32_dac_regmap_cfg = {
 	.max_register = 0x3fc,
 };
 
+static int stm32_dac_core_hw_start(struct device *dev)
+{
+	struct stm32_dac_common *common = dev_get_drvdata(dev);
+	struct stm32_dac_priv *priv = to_stm32_dac_priv(common);
+	int ret;
+
+	ret = regulator_enable(priv->vref);
+	if (ret < 0) {
+		dev_err(dev, "vref enable failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(priv->pclk);
+	if (ret < 0) {
+		dev_err(dev, "pclk enable failed: %d\n", ret);
+		goto err_regulator_disable;
+	}
+
+	return 0;
+
+err_regulator_disable:
+	regulator_disable(priv->vref);
+
+	return ret;
+}
+
+static void stm32_dac_core_hw_stop(struct device *dev)
+{
+	struct stm32_dac_common *common = dev_get_drvdata(dev);
+	struct stm32_dac_priv *priv = to_stm32_dac_priv(common);
+
+	clk_disable_unprepare(priv->pclk);
+	regulator_disable(priv->vref);
+}
+
 static int stm32_dac_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -66,6 +102,8 @@ static int stm32_dac_probe(struct platform_device *pdev)
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
+	platform_set_drvdata(pdev, &priv->common);
+
 	cfg = (const struct stm32_dac_cfg *)
 		of_match_device(dev->driver->of_match_table, dev)->data;
 
@@ -74,11 +112,19 @@ static int stm32_dac_probe(struct platform_device *pdev)
 	if (IS_ERR(mmio))
 		return PTR_ERR(mmio);
 
-	regmap = devm_regmap_init_mmio(dev, mmio, &stm32_dac_regmap_cfg);
+	regmap = devm_regmap_init_mmio_clk(dev, "pclk", mmio,
+					   &stm32_dac_regmap_cfg);
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 	priv->common.regmap = regmap;
 
+	priv->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(priv->pclk)) {
+		ret = PTR_ERR(priv->pclk);
+		dev_err(dev, "pclk get failed\n");
+		return ret;
+	}
+
 	priv->vref = devm_regulator_get(dev, "vref");
 	if (IS_ERR(priv->vref)) {
 		ret = PTR_ERR(priv->vref);
@@ -86,33 +132,22 @@ static int stm32_dac_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = regulator_enable(priv->vref);
-	if (ret < 0) {
-		dev_err(dev, "vref enable failed\n");
-		return ret;
-	}
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	ret = stm32_dac_core_hw_start(dev);
+	if (ret)
+		goto err_pm_stop;
 
 	ret = regulator_get_voltage(priv->vref);
 	if (ret < 0) {
 		dev_err(dev, "vref get voltage failed, %d\n", ret);
-		goto err_vref;
+		goto err_hw_stop;
 	}
 	priv->common.vref_mv = ret / 1000;
 	dev_dbg(dev, "vref+=%dmV\n", priv->common.vref_mv);
 
-	priv->pclk = devm_clk_get(dev, "pclk");
-	if (IS_ERR(priv->pclk)) {
-		ret = PTR_ERR(priv->pclk);
-		dev_err(dev, "pclk get failed\n");
-		goto err_vref;
-	}
-
-	ret = clk_prepare_enable(priv->pclk);
-	if (ret < 0) {
-		dev_err(dev, "pclk enable failed\n");
-		goto err_vref;
-	}
-
 	priv->rst = devm_reset_control_get_exclusive(dev, NULL);
 	if (!IS_ERR(priv->rst)) {
 		reset_control_assert(priv->rst);
@@ -128,39 +163,79 @@ static int stm32_dac_probe(struct platform_device *pdev)
 					 priv->common.hfsel ?
 					 STM32H7_DAC_CR_HFSEL : 0);
 		if (ret)
-			goto err_pclk;
+			goto err_hw_stop;
 	}
 
-	platform_set_drvdata(pdev, &priv->common);
 
 	ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, dev);
 	if (ret < 0) {
 		dev_err(dev, "failed to populate DT children\n");
-		goto err_pclk;
+		goto err_hw_stop;
 	}
 
+	pm_runtime_put(dev);
+
 	return 0;
 
-err_pclk:
-	clk_disable_unprepare(priv->pclk);
-err_vref:
-	regulator_disable(priv->vref);
+err_hw_stop:
+	stm32_dac_core_hw_stop(dev);
+err_pm_stop:
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
 
 	return ret;
 }
 
 static int stm32_dac_remove(struct platform_device *pdev)
 {
-	struct stm32_dac_common *common = platform_get_drvdata(pdev);
+	pm_runtime_get_sync(&pdev->dev);
+	of_platform_depopulate(&pdev->dev);
+	stm32_dac_core_hw_stop(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused stm32_dac_core_resume(struct device *dev)
+{
+	struct stm32_dac_common *common = dev_get_drvdata(dev);
 	struct stm32_dac_priv *priv = to_stm32_dac_priv(common);
+	int ret;
 
-	of_platform_depopulate(&pdev->dev);
-	clk_disable_unprepare(priv->pclk);
-	regulator_disable(priv->vref);
+	if (priv->common.hfsel) {
+		/* restore hfsel (maybe lost under low power state) */
+		ret = regmap_update_bits(priv->common.regmap, STM32_DAC_CR,
+					 STM32H7_DAC_CR_HFSEL,
+					 STM32H7_DAC_CR_HFSEL);
+		if (ret)
+			return ret;
+	}
+
+	return pm_runtime_force_resume(dev);
+}
+
+static int __maybe_unused stm32_dac_core_runtime_suspend(struct device *dev)
+{
+	stm32_dac_core_hw_stop(dev);
 
 	return 0;
 }
 
+static int __maybe_unused stm32_dac_core_runtime_resume(struct device *dev)
+{
+	return stm32_dac_core_hw_start(dev);
+}
+
+static const struct dev_pm_ops stm32_dac_core_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, stm32_dac_core_resume)
+	SET_RUNTIME_PM_OPS(stm32_dac_core_runtime_suspend,
+			   stm32_dac_core_runtime_resume,
+			   NULL)
+};
+
 static const struct stm32_dac_cfg stm32h7_dac_cfg = {
 	.has_hfsel = true,
 };
@@ -182,6 +257,7 @@ static struct platform_driver stm32_dac_driver = {
 	.driver = {
 		.name = "stm32-dac-core",
 		.of_match_table = stm32_dac_of_match,
+		.pm = &stm32_dac_core_pm_ops,
 	},
 };
 module_platform_driver(stm32_dac_driver);
diff --git a/drivers/iio/dac/stm32-dac.c b/drivers/iio/dac/stm32-dac.c
index cce26a3a6627..f22c1d9129b2 100644
--- a/drivers/iio/dac/stm32-dac.c
+++ b/drivers/iio/dac/stm32-dac.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 
 #include "stm32-dac-core.h"
 
@@ -20,6 +21,8 @@
 #define STM32_DAC_CHANNEL_2		2
 #define STM32_DAC_IS_CHAN_1(ch)		((ch) & STM32_DAC_CHANNEL_1)
 
+#define STM32_DAC_AUTO_SUSPEND_DELAY_MS	2000
+
 /**
  * struct stm32_dac - private data of DAC driver
  * @common:		reference to DAC common data
@@ -49,15 +52,34 @@ static int stm32_dac_set_enable_state(struct iio_dev *indio_dev, int ch,
 				      bool enable)
 {
 	struct stm32_dac *dac = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	u32 msk = STM32_DAC_IS_CHAN_1(ch) ? STM32_DAC_CR_EN1 : STM32_DAC_CR_EN2;
 	u32 en = enable ? msk : 0;
 	int ret;
 
+	/* already enabled / disabled ? */
+	mutex_lock(&indio_dev->mlock);
+	ret = stm32_dac_is_enabled(indio_dev, ch);
+	if (ret < 0 || enable == !!ret) {
+		mutex_unlock(&indio_dev->mlock);
+		return ret < 0 ? ret : 0;
+	}
+
+	if (enable) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0) {
+			pm_runtime_put_noidle(dev);
+			mutex_unlock(&indio_dev->mlock);
+			return ret;
+		}
+	}
+
 	ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, msk, en);
+	mutex_unlock(&indio_dev->mlock);
 	if (ret < 0) {
 		dev_err(&indio_dev->dev, "%s failed\n", en ?
 			"Enable" : "Disable");
-		return ret;
+		goto err_put_pm;
 	}
 
 	/*
@@ -68,7 +90,20 @@ static int stm32_dac_set_enable_state(struct iio_dev *indio_dev, int ch,
 	if (en && dac->common->hfsel)
 		udelay(1);
 
+	if (!enable) {
+		pm_runtime_mark_last_busy(dev);
+		pm_runtime_put_autosuspend(dev);
+	}
+
 	return 0;
+
+err_put_pm:
+	if (enable) {
+		pm_runtime_mark_last_busy(dev);
+		pm_runtime_put_autosuspend(dev);
+	}
+
+	return ret;
 }
 
 static int stm32_dac_get_value(struct stm32_dac *dac, int channel, int *val)
@@ -272,6 +307,7 @@ static int stm32_dac_chan_of_init(struct iio_dev *indio_dev)
 static int stm32_dac_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
 	struct iio_dev *indio_dev;
 	struct stm32_dac *dac;
 	int ret;
@@ -296,9 +332,61 @@ static int stm32_dac_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	return devm_iio_device_register(&pdev->dev, indio_dev);
+	/* Get stm32-dac-core PM online */
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_set_autosuspend_delay(dev, STM32_DAC_AUTO_SUSPEND_DELAY_MS);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_enable(dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto err_pm_put;
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+
+err_pm_put:
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
+
+	return ret;
 }
 
+static int stm32_dac_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&pdev->dev);
+	iio_device_unregister(indio_dev);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused stm32_dac_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	int channel = indio_dev->channels[0].channel;
+	int ret;
+
+	/* Ensure DAC is disabled before suspend */
+	ret = stm32_dac_is_enabled(indio_dev, channel);
+	if (ret)
+		return ret < 0 ? ret : -EBUSY;
+
+	return pm_runtime_force_suspend(dev);
+}
+
+static const struct dev_pm_ops stm32_dac_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(stm32_dac_suspend, pm_runtime_force_resume)
+};
+
 static const struct of_device_id stm32_dac_of_match[] = {
 	{ .compatible = "st,stm32-dac", },
 	{},
@@ -307,9 +395,11 @@ MODULE_DEVICE_TABLE(of, stm32_dac_of_match);
 
 static struct platform_driver stm32_dac_driver = {
 	.probe = stm32_dac_probe,
+	.remove = stm32_dac_remove,
 	.driver = {
 		.name = "stm32-dac",
 		.of_match_table = stm32_dac_of_match,
+		.pm = &stm32_dac_pm_ops,
 	},
 };
 module_platform_driver(stm32_dac_driver);
diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c
index 80154bca18b6..8e908a749f95 100644
--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -543,7 +543,7 @@ static irqreturn_t mpu3050_trigger_handler(int irq, void *p)
 				toread = bytes_per_datum;
 				offset = 1;
 				/* Put in some dummy value */
-				fifo_values[0] = 0xAAAA;
+				fifo_values[0] = cpu_to_be16(0xAAAA);
 			}
 
 			ret = regmap_bulk_read(mpu3050->map,
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index c0acbb5d2ffb..57be68b291fa 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -14,7 +14,6 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/iio/iio.h>
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index f3c7282321a8..60bb1029e759 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -40,6 +40,33 @@ config ADIS16480
 
 source "drivers/iio/imu/bmi160/Kconfig"
 
+config FXOS8700
+	tristate
+
+config FXOS8700_I2C
+	tristate "NXP FXOS8700 I2C driver"
+	depends on I2C
+	select FXOS8700
+	select REGMAP_I2C
+	help
+	  Say yes here to build support for the NXP FXOS8700 m+g combo
+	  sensor on I2C.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called fxos8700_i2c.
+
+config FXOS8700_SPI
+	tristate "NXP FXOS8700 SPI driver"
+	depends on SPI
+	select FXOS8700
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for the NXP FXOS8700 m+g combo
+	  sensor on SPI.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called fxos8700_spi.
+
 config KMX61
 	tristate "Kionix KMX61 6-axis accelerometer and magnetometer"
 	depends on I2C
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index 4a6958865504..5237fd4bc384 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -14,6 +14,11 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
 obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
 
 obj-y += bmi160/
+
+obj-$(CONFIG_FXOS8700) += fxos8700_core.o
+obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
+obj-$(CONFIG_FXOS8700_SPI) += fxos8700_spi.o
+
 obj-y += inv_mpu6050/
 
 obj-$(CONFIG_KMX61) += kmx61.o
diff --git a/drivers/iio/imu/fxos8700.h b/drivers/iio/imu/fxos8700.h
new file mode 100644
index 000000000000..6dfb8d7099e4
--- /dev/null
+++ b/drivers/iio/imu/fxos8700.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef FXOS8700_H_
+#define FXOS8700_H_
+
+extern const struct regmap_config fxos8700_regmap_config;
+
+int fxos8700_core_probe(struct device *dev, struct regmap *regmap,
+			const char *name, bool use_spi);
+
+#endif  /* FXOS8700_H_ */
diff --git a/drivers/iio/imu/fxos8700_core.c b/drivers/iio/imu/fxos8700_core.c
new file mode 100644
index 000000000000..7b47be44ea59
--- /dev/null
+++ b/drivers/iio/imu/fxos8700_core.c
@@ -0,0 +1,649 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FXOS8700 - NXP IMU (accelerometer plus magnetometer)
+ *
+ * IIO core driver for FXOS8700, with support for I2C/SPI busses
+ *
+ * TODO: Buffer, trigger, and IRQ support
+ */
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include "fxos8700.h"
+
+/* Register Definitions */
+#define FXOS8700_STATUS             0x00
+#define FXOS8700_OUT_X_MSB          0x01
+#define FXOS8700_OUT_X_LSB          0x02
+#define FXOS8700_OUT_Y_MSB          0x03
+#define FXOS8700_OUT_Y_LSB          0x04
+#define FXOS8700_OUT_Z_MSB          0x05
+#define FXOS8700_OUT_Z_LSB          0x06
+#define FXOS8700_F_SETUP            0x09
+#define FXOS8700_TRIG_CFG           0x0a
+#define FXOS8700_SYSMOD             0x0b
+#define FXOS8700_INT_SOURCE         0x0c
+#define FXOS8700_WHO_AM_I           0x0d
+#define FXOS8700_XYZ_DATA_CFG       0x0e
+#define FXOS8700_HP_FILTER_CUTOFF   0x0f
+#define FXOS8700_PL_STATUS          0x10
+#define FXOS8700_PL_CFG             0x11
+#define FXOS8700_PL_COUNT           0x12
+#define FXOS8700_PL_BF_ZCOMP        0x13
+#define FXOS8700_PL_THS_REG         0x14
+#define FXOS8700_A_FFMT_CFG         0x15
+#define FXOS8700_A_FFMT_SRC         0x16
+#define FXOS8700_A_FFMT_THS         0x17
+#define FXOS8700_A_FFMT_COUNT       0x18
+#define FXOS8700_TRANSIENT_CFG      0x1d
+#define FXOS8700_TRANSIENT_SRC      0x1e
+#define FXOS8700_TRANSIENT_THS      0x1f
+#define FXOS8700_TRANSIENT_COUNT    0x20
+#define FXOS8700_PULSE_CFG          0x21
+#define FXOS8700_PULSE_SRC          0x22
+#define FXOS8700_PULSE_THSX         0x23
+#define FXOS8700_PULSE_THSY         0x24
+#define FXOS8700_PULSE_THSZ         0x25
+#define FXOS8700_PULSE_TMLT         0x26
+#define FXOS8700_PULSE_LTCY         0x27
+#define FXOS8700_PULSE_WIND         0x28
+#define FXOS8700_ASLP_COUNT         0x29
+#define FXOS8700_CTRL_REG1          0x2a
+#define FXOS8700_CTRL_REG2          0x2b
+#define FXOS8700_CTRL_REG3          0x2c
+#define FXOS8700_CTRL_REG4          0x2d
+#define FXOS8700_CTRL_REG5          0x2e
+#define FXOS8700_OFF_X              0x2f
+#define FXOS8700_OFF_Y              0x30
+#define FXOS8700_OFF_Z              0x31
+#define FXOS8700_M_DR_STATUS        0x32
+#define FXOS8700_M_OUT_X_MSB        0x33
+#define FXOS8700_M_OUT_X_LSB        0x34
+#define FXOS8700_M_OUT_Y_MSB        0x35
+#define FXOS8700_M_OUT_Y_LSB        0x36
+#define FXOS8700_M_OUT_Z_MSB        0x37
+#define FXOS8700_M_OUT_Z_LSB        0x38
+#define FXOS8700_CMP_X_MSB          0x39
+#define FXOS8700_CMP_X_LSB          0x3a
+#define FXOS8700_CMP_Y_MSB          0x3b
+#define FXOS8700_CMP_Y_LSB          0x3c
+#define FXOS8700_CMP_Z_MSB          0x3d
+#define FXOS8700_CMP_Z_LSB          0x3e
+#define FXOS8700_M_OFF_X_MSB        0x3f
+#define FXOS8700_M_OFF_X_LSB        0x40
+#define FXOS8700_M_OFF_Y_MSB        0x41
+#define FXOS8700_M_OFF_Y_LSB        0x42
+#define FXOS8700_M_OFF_Z_MSB        0x43
+#define FXOS8700_M_OFF_Z_LSB        0x44
+#define FXOS8700_MAX_X_MSB          0x45
+#define FXOS8700_MAX_X_LSB          0x46
+#define FXOS8700_MAX_Y_MSB          0x47
+#define FXOS8700_MAX_Y_LSB          0x48
+#define FXOS8700_MAX_Z_MSB          0x49
+#define FXOS8700_MAX_Z_LSB          0x4a
+#define FXOS8700_MIN_X_MSB          0x4b
+#define FXOS8700_MIN_X_LSB          0x4c
+#define FXOS8700_MIN_Y_MSB          0x4d
+#define FXOS8700_MIN_Y_LSB          0x4e
+#define FXOS8700_MIN_Z_MSB          0x4f
+#define FXOS8700_MIN_Z_LSB          0x50
+#define FXOS8700_TEMP               0x51
+#define FXOS8700_M_THS_CFG          0x52
+#define FXOS8700_M_THS_SRC          0x53
+#define FXOS8700_M_THS_X_MSB        0x54
+#define FXOS8700_M_THS_X_LSB        0x55
+#define FXOS8700_M_THS_Y_MSB        0x56
+#define FXOS8700_M_THS_Y_LSB        0x57
+#define FXOS8700_M_THS_Z_MSB        0x58
+#define FXOS8700_M_THS_Z_LSB        0x59
+#define FXOS8700_M_THS_COUNT        0x5a
+#define FXOS8700_M_CTRL_REG1        0x5b
+#define FXOS8700_M_CTRL_REG2        0x5c
+#define FXOS8700_M_CTRL_REG3        0x5d
+#define FXOS8700_M_INT_SRC          0x5e
+#define FXOS8700_A_VECM_CFG         0x5f
+#define FXOS8700_A_VECM_THS_MSB     0x60
+#define FXOS8700_A_VECM_THS_LSB     0x61
+#define FXOS8700_A_VECM_CNT         0x62
+#define FXOS8700_A_VECM_INITX_MSB   0x63
+#define FXOS8700_A_VECM_INITX_LSB   0x64
+#define FXOS8700_A_VECM_INITY_MSB   0x65
+#define FXOS8700_A_VECM_INITY_LSB   0x66
+#define FXOS8700_A_VECM_INITZ_MSB   0x67
+#define FXOS8700_A_VECM_INITZ_LSB   0x68
+#define FXOS8700_M_VECM_CFG         0x69
+#define FXOS8700_M_VECM_THS_MSB     0x6a
+#define FXOS8700_M_VECM_THS_LSB     0x6b
+#define FXOS8700_M_VECM_CNT         0x6c
+#define FXOS8700_M_VECM_INITX_MSB   0x6d
+#define FXOS8700_M_VECM_INITX_LSB   0x6e
+#define FXOS8700_M_VECM_INITY_MSB   0x6f
+#define FXOS8700_M_VECM_INITY_LSB   0x70
+#define FXOS8700_M_VECM_INITZ_MSB   0x71
+#define FXOS8700_M_VECM_INITZ_LSB   0x72
+#define FXOS8700_A_FFMT_THS_X_MSB   0x73
+#define FXOS8700_A_FFMT_THS_X_LSB   0x74
+#define FXOS8700_A_FFMT_THS_Y_MSB   0x75
+#define FXOS8700_A_FFMT_THS_Y_LSB   0x76
+#define FXOS8700_A_FFMT_THS_Z_MSB   0x77
+#define FXOS8700_A_FFMT_THS_Z_LSB   0x78
+#define FXOS8700_A_TRAN_INIT_MSB    0x79
+#define FXOS8700_A_TRAN_INIT_LSB_X  0x7a
+#define FXOS8700_A_TRAN_INIT_LSB_Y  0x7b
+#define FXOS8700_A_TRAN_INIT_LSB_Z  0x7d
+#define FXOS8700_TM_NVM_LOCK        0x7e
+#define FXOS8700_NVM_DATA0_35       0x80
+#define FXOS8700_NVM_DATA_BNK3      0xa4
+#define FXOS8700_NVM_DATA_BNK2      0xa5
+#define FXOS8700_NVM_DATA_BNK1      0xa6
+#define FXOS8700_NVM_DATA_BNK0      0xa7
+
+/* Bit definitions for FXOS8700_CTRL_REG1 */
+#define FXOS8700_CTRL_ODR_MSK       0x38
+#define FXOS8700_CTRL_ODR_MAX       0x00
+#define FXOS8700_CTRL_ODR_MIN       GENMASK(4, 3)
+
+/* Bit definitions for FXOS8700_M_CTRL_REG1 */
+#define FXOS8700_HMS_MASK           GENMASK(1, 0)
+#define FXOS8700_OS_MASK            GENMASK(4, 2)
+
+/* Bit definitions for FXOS8700_M_CTRL_REG2 */
+#define FXOS8700_MAXMIN_RST         BIT(2)
+#define FXOS8700_MAXMIN_DIS_THS     BIT(3)
+#define FXOS8700_MAXMIN_DIS         BIT(4)
+
+#define FXOS8700_ACTIVE             0x01
+#define FXOS8700_ACTIVE_MIN_USLEEP  4000 /* from table 6 in datasheet */
+
+#define FXOS8700_DEVICE_ID          0xC7
+#define FXOS8700_PRE_DEVICE_ID      0xC4
+#define FXOS8700_DATA_BUF_SIZE      3
+
+struct fxos8700_data {
+	struct regmap *regmap;
+	struct iio_trigger *trig;
+	__be16 buf[FXOS8700_DATA_BUF_SIZE] ____cacheline_aligned;
+};
+
+/* Regmap info */
+static const struct regmap_range read_range[] = {
+	{
+		.range_min = FXOS8700_STATUS,
+		.range_max = FXOS8700_A_FFMT_COUNT,
+	}, {
+		.range_min = FXOS8700_TRANSIENT_CFG,
+		.range_max = FXOS8700_A_FFMT_THS_Z_LSB,
+	},
+};
+
+static const struct regmap_range write_range[] = {
+	{
+		.range_min = FXOS8700_F_SETUP,
+		.range_max = FXOS8700_TRIG_CFG,
+	}, {
+		.range_min = FXOS8700_XYZ_DATA_CFG,
+		.range_max = FXOS8700_HP_FILTER_CUTOFF,
+	}, {
+		.range_min = FXOS8700_PL_CFG,
+		.range_max = FXOS8700_A_FFMT_CFG,
+	}, {
+		.range_min = FXOS8700_A_FFMT_THS,
+		.range_max = FXOS8700_TRANSIENT_CFG,
+	}, {
+		.range_min = FXOS8700_TRANSIENT_THS,
+		.range_max = FXOS8700_PULSE_CFG,
+	}, {
+		.range_min = FXOS8700_PULSE_THSX,
+		.range_max = FXOS8700_OFF_Z,
+	}, {
+		.range_min = FXOS8700_M_OFF_X_MSB,
+		.range_max = FXOS8700_M_OFF_Z_LSB,
+	}, {
+		.range_min = FXOS8700_M_THS_CFG,
+		.range_max = FXOS8700_M_THS_CFG,
+	}, {
+		.range_min = FXOS8700_M_THS_X_MSB,
+		.range_max = FXOS8700_M_CTRL_REG3,
+	}, {
+		.range_min = FXOS8700_A_VECM_CFG,
+		.range_max = FXOS8700_A_FFMT_THS_Z_LSB,
+	},
+};
+
+static const struct regmap_access_table driver_read_table = {
+	.yes_ranges =   read_range,
+	.n_yes_ranges = ARRAY_SIZE(read_range),
+};
+
+static const struct regmap_access_table driver_write_table = {
+	.yes_ranges =   write_range,
+	.n_yes_ranges = ARRAY_SIZE(write_range),
+};
+
+const struct regmap_config fxos8700_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = FXOS8700_NVM_DATA_BNK0,
+	.rd_table = &driver_read_table,
+	.wr_table = &driver_write_table,
+};
+EXPORT_SYMBOL(fxos8700_regmap_config);
+
+#define FXOS8700_CHANNEL(_type, _axis) {			\
+	.type = _type,						\
+	.modified = 1,						\
+	.channel2 = IIO_MOD_##_axis,				\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |  \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+}
+
+enum fxos8700_accel_scale_bits {
+	MODE_2G = 0,
+	MODE_4G,
+	MODE_8G,
+};
+
+/* scan indexes follow DATA register order */
+enum fxos8700_scan_axis {
+	FXOS8700_SCAN_ACCEL_X = 0,
+	FXOS8700_SCAN_ACCEL_Y,
+	FXOS8700_SCAN_ACCEL_Z,
+	FXOS8700_SCAN_MAGN_X,
+	FXOS8700_SCAN_MAGN_Y,
+	FXOS8700_SCAN_MAGN_Z,
+	FXOS8700_SCAN_RHALL,
+	FXOS8700_SCAN_TIMESTAMP,
+};
+
+enum fxos8700_sensor {
+	FXOS8700_ACCEL	= 0,
+	FXOS8700_MAGN,
+	FXOS8700_NUM_SENSORS /* must be last */
+};
+
+enum fxos8700_int_pin {
+	FXOS8700_PIN_INT1,
+	FXOS8700_PIN_INT2
+};
+
+struct fxos8700_scale {
+	u8 bits;
+	int uscale;
+};
+
+struct fxos8700_odr {
+	u8 bits;
+	int odr;
+	int uodr;
+};
+
+static const struct fxos8700_scale fxos8700_accel_scale[] = {
+	{ MODE_2G, 244},
+	{ MODE_4G, 488},
+	{ MODE_8G, 976},
+};
+
+/*
+ * Accellerometer and magnetometer have the same ODR options, set in the
+ * CTRL_REG1 register. ODR is halved when using both sensors at once in
+ * hybrid mode.
+ */
+static const struct fxos8700_odr fxos8700_odr[] = {
+	{0x00, 800, 0},
+	{0x01, 400, 0},
+	{0x02, 200, 0},
+	{0x03, 100, 0},
+	{0x04, 50, 0},
+	{0x05, 12, 500000},
+	{0x06, 6, 250000},
+	{0x07, 1, 562500},
+};
+
+static const struct iio_chan_spec fxos8700_channels[] = {
+	FXOS8700_CHANNEL(IIO_ACCEL, X),
+	FXOS8700_CHANNEL(IIO_ACCEL, Y),
+	FXOS8700_CHANNEL(IIO_ACCEL, Z),
+	FXOS8700_CHANNEL(IIO_MAGN, X),
+	FXOS8700_CHANNEL(IIO_MAGN, Y),
+	FXOS8700_CHANNEL(IIO_MAGN, Z),
+	IIO_CHAN_SOFT_TIMESTAMP(FXOS8700_SCAN_TIMESTAMP),
+};
+
+static enum fxos8700_sensor fxos8700_to_sensor(enum iio_chan_type iio_type)
+{
+	switch (iio_type) {
+	case IIO_ACCEL:
+		return FXOS8700_ACCEL;
+	case IIO_ANGL_VEL:
+		return FXOS8700_MAGN;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int fxos8700_set_active_mode(struct fxos8700_data *data,
+				    enum fxos8700_sensor t, bool mode)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, mode);
+	if (ret)
+		return ret;
+
+	usleep_range(FXOS8700_ACTIVE_MIN_USLEEP,
+		     FXOS8700_ACTIVE_MIN_USLEEP + 1000);
+
+	return 0;
+}
+
+static int fxos8700_set_scale(struct fxos8700_data *data,
+			      enum fxos8700_sensor t, int uscale)
+{
+	int i;
+	static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale);
+	struct device *dev = regmap_get_device(data->regmap);
+
+	if (t == FXOS8700_MAGN) {
+		dev_err(dev, "Magnetometer scale is locked at 1200uT\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < scale_num; i++)
+		if (fxos8700_accel_scale[i].uscale == uscale)
+			break;
+
+	if (i == scale_num)
+		return -EINVAL;
+
+	return regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG,
+			    fxos8700_accel_scale[i].bits);
+}
+
+static int fxos8700_get_scale(struct fxos8700_data *data,
+			      enum fxos8700_sensor t, int *uscale)
+{
+	int i, ret, val;
+	static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale);
+
+	if (t == FXOS8700_MAGN) {
+		*uscale = 1200; /* Magnetometer is locked at 1200uT */
+		return 0;
+	}
+
+	ret = regmap_read(data->regmap, FXOS8700_XYZ_DATA_CFG, &val);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < scale_num; i++) {
+		if (fxos8700_accel_scale[i].bits == (val & 0x3)) {
+			*uscale = fxos8700_accel_scale[i].uscale;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int fxos8700_get_data(struct fxos8700_data *data, int chan_type,
+			     int axis, int *val)
+{
+	u8 base, reg;
+	int ret;
+	enum fxos8700_sensor type = fxos8700_to_sensor(chan_type);
+
+	base = type ? FXOS8700_OUT_X_MSB : FXOS8700_M_OUT_X_MSB;
+
+	/* Block read 6 bytes of device output registers to avoid data loss */
+	ret = regmap_bulk_read(data->regmap, base, data->buf,
+			       FXOS8700_DATA_BUF_SIZE);
+	if (ret)
+		return ret;
+
+	/* Convert axis to buffer index */
+	reg = axis - IIO_MOD_X;
+
+	/* Convert to native endianness */
+	*val = sign_extend32(be16_to_cpu(data->buf[reg]), 15);
+
+	return 0;
+}
+
+static int fxos8700_set_odr(struct fxos8700_data *data, enum fxos8700_sensor t,
+			    int odr, int uodr)
+{
+	int i, ret, val;
+	bool active_mode;
+	static const int odr_num = ARRAY_SIZE(fxos8700_odr);
+
+	ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
+	if (ret)
+		return ret;
+
+	active_mode = val & FXOS8700_ACTIVE;
+
+	if (active_mode) {
+		/*
+		 * The device must be in standby mode to change any of the
+		 * other fields within CTRL_REG1
+		 */
+		ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1,
+				   val & ~FXOS8700_ACTIVE);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < odr_num; i++)
+		if (fxos8700_odr[i].odr == odr && fxos8700_odr[i].uodr == uodr)
+			break;
+
+	if (i >= odr_num)
+		return -EINVAL;
+
+	return regmap_update_bits(data->regmap,
+				  FXOS8700_CTRL_REG1,
+				  FXOS8700_CTRL_ODR_MSK + FXOS8700_ACTIVE,
+				  fxos8700_odr[i].bits << 3 | active_mode);
+}
+
+static int fxos8700_get_odr(struct fxos8700_data *data, enum fxos8700_sensor t,
+			    int *odr, int *uodr)
+{
+	int i, val, ret;
+	static const int odr_num = ARRAY_SIZE(fxos8700_odr);
+
+	ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
+	if (ret)
+		return ret;
+
+	val &= FXOS8700_CTRL_ODR_MSK;
+
+	for (i = 0; i < odr_num; i++)
+		if (val == fxos8700_odr[i].bits)
+			break;
+
+	if (i >= odr_num)
+		return -EINVAL;
+
+	*odr = fxos8700_odr[i].odr;
+	*uodr = fxos8700_odr[i].uodr;
+
+	return 0;
+}
+
+static int fxos8700_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	int ret;
+	struct fxos8700_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = fxos8700_get_data(data, chan->type, chan->channel2, val);
+		if (ret)
+			return ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		ret = fxos8700_get_scale(data, fxos8700_to_sensor(chan->type),
+					 val2);
+		return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = fxos8700_get_odr(data, fxos8700_to_sensor(chan->type),
+				       val, val2);
+		return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int fxos8700_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct fxos8700_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return fxos8700_set_scale(data, fxos8700_to_sensor(chan->type),
+					  val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return fxos8700_set_odr(data, fxos8700_to_sensor(chan->type),
+					val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static IIO_CONST_ATTR(in_accel_sampling_frequency_available,
+		      "1.5625 6.25 12.5 50 100 200 400 800");
+static IIO_CONST_ATTR(in_magn_sampling_frequency_available,
+		      "1.5625 6.25 12.5 50 100 200 400 800");
+static IIO_CONST_ATTR(in_accel_scale_available, "0.000244 0.000488 0.000976");
+static IIO_CONST_ATTR(in_magn_scale_available, "0.000001200");
+
+static struct attribute *fxos8700_attrs[] = {
+	&iio_const_attr_in_accel_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_magn_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_accel_scale_available.dev_attr.attr,
+	&iio_const_attr_in_magn_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group fxos8700_attrs_group = {
+	.attrs = fxos8700_attrs,
+};
+
+static const struct iio_info fxos8700_info = {
+	.read_raw = fxos8700_read_raw,
+	.write_raw = fxos8700_write_raw,
+	.attrs = &fxos8700_attrs_group,
+};
+
+static int fxos8700_chip_init(struct fxos8700_data *data, bool use_spi)
+{
+	int ret;
+	unsigned int val;
+	struct device *dev = regmap_get_device(data->regmap);
+
+	ret = regmap_read(data->regmap, FXOS8700_WHO_AM_I, &val);
+	if (ret) {
+		dev_err(dev, "Error reading chip id\n");
+		return ret;
+	}
+	if (val != FXOS8700_DEVICE_ID && val != FXOS8700_PRE_DEVICE_ID) {
+		dev_err(dev, "Wrong chip id, got %x expected %x or %x\n",
+			val, FXOS8700_DEVICE_ID, FXOS8700_PRE_DEVICE_ID);
+		return -ENODEV;
+	}
+
+	ret = fxos8700_set_active_mode(data, FXOS8700_ACCEL, true);
+	if (ret)
+		return ret;
+
+	ret = fxos8700_set_active_mode(data, FXOS8700_MAGN, true);
+	if (ret)
+		return ret;
+
+	/*
+	 * The device must be in standby mode to change any of the other fields
+	 * within CTRL_REG1
+	 */
+	ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, 0x00);
+	if (ret)
+		return ret;
+
+	/* Set max oversample ratio (OSR) and both devices active */
+	ret = regmap_write(data->regmap, FXOS8700_M_CTRL_REG1,
+			   FXOS8700_HMS_MASK | FXOS8700_OS_MASK);
+	if (ret)
+		return ret;
+
+	/* Disable and rst min/max measurements & threshold */
+	ret = regmap_write(data->regmap, FXOS8700_M_CTRL_REG2,
+			   FXOS8700_MAXMIN_RST | FXOS8700_MAXMIN_DIS_THS |
+			   FXOS8700_MAXMIN_DIS);
+	if (ret)
+		return ret;
+
+	/* Max ODR (800Hz individual or 400Hz hybrid), active mode */
+	ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1,
+			   FXOS8700_CTRL_ODR_MAX | FXOS8700_ACTIVE);
+	if (ret)
+		return ret;
+
+	/* Set for max full-scale range (+/-8G) */
+	return regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, MODE_8G);
+}
+
+static void fxos8700_chip_uninit(void *data)
+{
+	struct fxos8700_data *fxos8700_data = data;
+
+	fxos8700_set_active_mode(fxos8700_data, FXOS8700_ACCEL, false);
+	fxos8700_set_active_mode(fxos8700_data, FXOS8700_MAGN, false);
+}
+
+int fxos8700_core_probe(struct device *dev, struct regmap *regmap,
+			const char *name, bool use_spi)
+{
+	struct iio_dev *indio_dev;
+	struct fxos8700_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	dev_set_drvdata(dev, indio_dev);
+	data->regmap = regmap;
+
+	ret = fxos8700_chip_init(data, use_spi);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, fxos8700_chip_uninit, data);
+	if (ret)
+		return ret;
+
+	indio_dev->dev.parent = dev;
+	indio_dev->channels = fxos8700_channels;
+	indio_dev->num_channels = ARRAY_SIZE(fxos8700_channels);
+	indio_dev->name = name ? name : "fxos8700";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &fxos8700_info;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_GPL(fxos8700_core_probe);
+
+MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
+MODULE_DESCRIPTION("FXOS8700 6-Axis Acc and Mag Combo Sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/fxos8700_i2c.c b/drivers/iio/imu/fxos8700_i2c.c
new file mode 100644
index 000000000000..3ceb76366313
--- /dev/null
+++ b/drivers/iio/imu/fxos8700_i2c.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FXOS8700 - NXP IMU, I2C bits
+ *
+ * 7-bit I2C slave address determined by SA1 and SA0 logic level
+ * inputs represented in the following table:
+ *      SA1  |  SA0  |  Slave Address
+ *      0    |  0    |  0x1E
+ *      0    |  1    |  0x1D
+ *      1    |  0    |  0x1C
+ *      1    |  1    |  0x1F
+ */
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/regmap.h>
+
+#include "fxos8700.h"
+
+static int fxos8700_i2c_probe(struct i2c_client *client,
+			      const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	const char *name = NULL;
+
+	regmap = devm_regmap_init_i2c(client, &fxos8700_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
+			(int)PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	if (id)
+		name = id->name;
+
+	return fxos8700_core_probe(&client->dev, regmap, name, false);
+}
+
+static const struct i2c_device_id fxos8700_i2c_id[] = {
+	{"fxos8700", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, fxos8700_i2c_id);
+
+static const struct acpi_device_id fxos8700_acpi_match[] = {
+	{"FXOS8700", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, fxos8700_acpi_match);
+
+static const struct of_device_id fxos8700_of_match[] = {
+	{ .compatible = "nxp,fxos8700" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fxos8700_of_match);
+
+static struct i2c_driver fxos8700_i2c_driver = {
+	.driver = {
+		.name                   = "fxos8700_i2c",
+		.acpi_match_table       = ACPI_PTR(fxos8700_acpi_match),
+		.of_match_table         = fxos8700_of_match,
+	},
+	.probe          = fxos8700_i2c_probe,
+	.id_table       = fxos8700_i2c_id,
+};
+module_i2c_driver(fxos8700_i2c_driver);
+
+MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
+MODULE_DESCRIPTION("FXOS8700 I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/fxos8700_spi.c b/drivers/iio/imu/fxos8700_spi.c
new file mode 100644
index 000000000000..57e7bb6444e7
--- /dev/null
+++ b/drivers/iio/imu/fxos8700_spi.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FXOS8700 - NXP IMU, SPI bits
+ */
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "fxos8700.h"
+
+static int fxos8700_spi_probe(struct spi_device *spi)
+{
+	struct regmap *regmap;
+	const struct spi_device_id *id = spi_get_device_id(spi);
+
+	regmap = devm_regmap_init_spi(spi, &fxos8700_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
+			(int)PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return fxos8700_core_probe(&spi->dev, regmap, id->name, true);
+}
+
+static const struct spi_device_id fxos8700_spi_id[] = {
+	{"fxos8700", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, fxos8700_spi_id);
+
+static const struct acpi_device_id fxos8700_acpi_match[] = {
+	{"FXOS8700", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, fxos8700_acpi_match);
+
+static const struct of_device_id fxos8700_of_match[] = {
+	{ .compatible = "nxp,fxos8700" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fxos8700_of_match);
+
+static struct spi_driver fxos8700_spi_driver = {
+	.probe          = fxos8700_spi_probe,
+	.id_table       = fxos8700_spi_id,
+	.driver = {
+		.acpi_match_table       = ACPI_PTR(fxos8700_acpi_match),
+		.of_match_table         = fxos8700_of_match,
+		.name                   = "fxos8700_spi",
+	},
+};
+module_spi_driver(fxos8700_spi_driver);
+
+MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
+MODULE_DESCRIPTION("FXOS8700 SPI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 77aa0e77212d..28f59d09208a 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -12,7 +12,8 @@ config IIO_ST_LSM6DSX
 	  Say yes here to build support for STMicroelectronics LSM6DSx imu
 	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
 	  ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c,
-	  ism330dhcx and the accelerometer/gyroscope of lsm9ds1.
+	  ism330dhcx, lsm6dsrx, lsm6ds0 and the accelerometer/gyroscope
+	  of lsm9ds1.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called st_lsm6dsx.
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index e5e782f756e4..37e499fe6bcf 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -26,6 +26,8 @@
 #define ST_LSM6DS3TRC_DEV_NAME	"lsm6ds3tr-c"
 #define ST_ISM330DHCX_DEV_NAME	"ism330dhcx"
 #define ST_LSM9DS1_DEV_NAME	"lsm9ds1-imu"
+#define ST_LSM6DS0_DEV_NAME	"lsm6ds0"
+#define ST_LSM6DSRX_DEV_NAME	"lsm6dsrx"
 
 enum st_lsm6dsx_hw_id {
 	ST_LSM6DS3_ID,
@@ -40,6 +42,8 @@ enum st_lsm6dsx_hw_id {
 	ST_LSM6DS3TRC_ID,
 	ST_ISM330DHCX_ID,
 	ST_LSM9DS1_ID,
+	ST_LSM6DS0_ID,
+	ST_LSM6DSRX_ID,
 	ST_LSM6DSX_MAX_ID,
 };
 
@@ -153,12 +157,14 @@ struct st_lsm6dsx_fifo_ops {
  * @hr_timer: Hw timer resolution register info (addr + mask).
  * @fifo_en: Hw timer FIFO enable register info (addr + mask).
  * @decimator: Hw timer FIFO decimator register info (addr + mask).
+ * @freq_fine: Difference in % of ODR with respect to the typical.
  */
 struct st_lsm6dsx_hw_ts_settings {
 	struct st_lsm6dsx_reg timer_en;
 	struct st_lsm6dsx_reg hr_timer;
 	struct st_lsm6dsx_reg fifo_en;
 	struct st_lsm6dsx_reg decimator;
+	u8 freq_fine;
 };
 
 /**
@@ -238,30 +244,27 @@ struct st_lsm6dsx_ext_dev_settings {
 /**
  * struct st_lsm6dsx_settings - ST IMU sensor settings
  * @wai: Sensor WhoAmI default value.
- * @int1_addr: Control Register address for INT1
- * @int2_addr: Control Register address for INT2
- * @reset_addr: register address for reset/reboot
+ * @reset: register address for reset.
+ * @boot: register address for boot.
+ * @bdu: register address for Block Data Update.
  * @max_fifo_size: Sensor max fifo length in FIFO words.
  * @id: List of hw id/device name supported by the driver configuration.
  * @channels: IIO channels supported by the device.
+ * @irq_config: interrupts related registers.
+ * @drdy_mask: register info for data-ready mask (addr + mask).
  * @odr_table: Hw sensors odr table (Hz + val).
  * @fs_table: Hw sensors gain table (gain + val).
  * @decimator: List of decimator register info (addr + mask).
  * @batch: List of FIFO batching register info (addr + mask).
- * @lir: Latched interrupt register info (addr + mask).
- * @clear_on_read: Clear on read register info (addr + mask).
  * @fifo_ops: Sensor hw FIFO parameters.
  * @ts_settings: Hw timer related settings.
  * @shub_settings: i2c controller related settings.
  */
 struct st_lsm6dsx_settings {
 	u8 wai;
-	u8 int1_addr;
-	u8 int2_addr;
-	u8 int1_func_addr;
-	u8 int2_func_addr;
-	u8 int_func_mask;
-	u8 reset_addr;
+	struct st_lsm6dsx_reg reset;
+	struct st_lsm6dsx_reg boot;
+	struct st_lsm6dsx_reg bdu;
 	u16 max_fifo_size;
 	struct {
 		enum st_lsm6dsx_hw_id hw_id;
@@ -271,12 +274,21 @@ struct st_lsm6dsx_settings {
 		const struct iio_chan_spec *chan;
 		int len;
 	} channels[2];
+	struct {
+		struct st_lsm6dsx_reg irq1;
+		struct st_lsm6dsx_reg irq2;
+		struct st_lsm6dsx_reg irq1_func;
+		struct st_lsm6dsx_reg irq2_func;
+		struct st_lsm6dsx_reg lir;
+		struct st_lsm6dsx_reg clear_on_read;
+		struct st_lsm6dsx_reg hla;
+		struct st_lsm6dsx_reg od;
+	} irq_config;
+	struct st_lsm6dsx_reg drdy_mask;
 	struct st_lsm6dsx_odr_table_entry odr_table[2];
 	struct st_lsm6dsx_fs_table_entry fs_table[2];
 	struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
 	struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
-	struct st_lsm6dsx_reg lir;
-	struct st_lsm6dsx_reg clear_on_read;
 	struct st_lsm6dsx_fifo_ops fifo_ops;
 	struct st_lsm6dsx_hw_ts_settings ts_settings;
 	struct st_lsm6dsx_shub_settings shub_settings;
@@ -340,9 +352,13 @@ struct st_lsm6dsx_sensor {
  * @fifo_mode: FIFO operating mode supported by the device.
  * @suspend_mask: Suspended sensor bitmask.
  * @enable_mask: Enabled sensor bitmask.
+ * @ts_gain: Hw timestamp rate after internal calibration.
  * @ts_sip: Total number of timestamp samples in a given pattern.
  * @sip: Total number of samples (acc/gyro/ts) in a given pattern.
  * @buff: Device read buffer.
+ * @irq_routing: pointer to interrupt routing configuration.
+ * @event_threshold: wakeup event threshold.
+ * @enable_event: enabled event bitmask.
  * @iio_devs: Pointers to acc/gyro iio_dev instances.
  * @settings: Pointer to the specific sensor settings in use.
  */
@@ -358,12 +374,13 @@ struct st_lsm6dsx_hw {
 	enum st_lsm6dsx_fifo_mode fifo_mode;
 	u8 suspend_mask;
 	u8 enable_mask;
+	s64 ts_gain;
 	u8 ts_sip;
 	u8 sip;
 
+	const struct st_lsm6dsx_reg *irq_routing;
 	u8 event_threshold;
 	u8 enable_event;
-	struct st_lsm6dsx_reg irq_routing;
 
 	u8 *buff;
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index ef579650fd52..31cd90d2c60e 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -14,10 +14,10 @@
  * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
  * value of the decimation factor and ODR set for each FIFO data set.
  *
- * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX: The FIFO buffer can be
- * configured to store data from gyroscope and accelerometer. Each sample
- * is queued with a tag (1B) indicating data source (gyroscope, accelerometer,
- * hw timer).
+ * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/LSM6DSRX/ISM330DHCX:
+ * The FIFO buffer can be configured to store data from gyroscope and
+ * accelerometer. Each sample is queued with a tag (1B) indicating data
+ * source (gyroscope, accelerometer, hw timer).
  *
  * FIFO supported modes:
  *  - BYPASS: FIFO disabled
@@ -50,7 +50,6 @@
 
 #define ST_LSM6DSX_MAX_FIFO_ODR_VAL		0x08
 
-#define ST_LSM6DSX_TS_SENSITIVITY		25000UL /* 25us */
 #define ST_LSM6DSX_TS_RESET_VAL			0xaa
 
 struct st_lsm6dsx_decimator_entry {
@@ -423,7 +422,7 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
 				 */
 				if (!reset_ts && ts >= 0xff0000)
 					reset_ts = true;
-				ts *= ST_LSM6DSX_TS_SENSITIVITY;
+				ts *= hw->ts_gain;
 
 				offset += ST_LSM6DSX_SAMPLE_SIZE;
 			}
@@ -450,13 +449,19 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
 	return read_len;
 }
 
+#define ST_LSM6DSX_INVALID_SAMPLE	0x7ffd
 static int
 st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
 			    u8 *data, s64 ts)
 {
+	s16 val = le16_to_cpu(*(__le16 *)data);
 	struct st_lsm6dsx_sensor *sensor;
 	struct iio_dev *iio_dev;
 
+	/* invalid sample during bootstrap phase */
+	if (val >= ST_LSM6DSX_INVALID_SAMPLE)
+		return -EINVAL;
+
 	/*
 	 * EXT_TAG are managed in FIFO fashion so ST_LSM6DSX_EXT0_TAG
 	 * corresponds to the first enabled channel, ST_LSM6DSX_EXT1_TAG
@@ -566,7 +571,7 @@ int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw)
 				 */
 				if (!reset_ts && ts >= 0xffff0000)
 					reset_ts = true;
-				ts *= ST_LSM6DSX_TS_SENSITIVITY;
+				ts *= hw->ts_gain;
 			} else {
 				st_lsm6dsx_push_tagged_data(hw, tag, iio_buff,
 							    ts);
@@ -586,6 +591,9 @@ int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
 {
 	int err;
 
+	if (!hw->settings->fifo_ops.read_fifo)
+		return -ENOTSUPP;
+
 	mutex_lock(&hw->fifo_lock);
 
 	hw->settings->fifo_ops.read_fifo(hw);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index de0049c75eeb..1f28a7733fc0 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -32,7 +32,7 @@
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
  *   - FIFO size: 3KB
  *
- * - LSM9DS1:
+ * - LSM9DS1/LSM6DS0:
  *   - Accelerometer supported ODR [Hz]: 10, 50, 119, 238, 476, 952
  *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
  *   - Gyroscope supported ODR [Hz]: 15, 60, 119, 238, 476, 952
@@ -61,17 +61,9 @@
 
 #include "st_lsm6dsx.h"
 
-#define ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK	BIT(3)
 #define ST_LSM6DSX_REG_WHOAMI_ADDR		0x0f
-#define ST_LSM6DSX_REG_RESET_MASK		BIT(0)
-#define ST_LSM6DSX_REG_BOOT_MASK		BIT(7)
-#define ST_LSM6DSX_REG_BDU_ADDR			0x12
-#define ST_LSM6DSX_REG_BDU_MASK			BIT(6)
 
-#define ST_LSM6DSX_REG_HLACTIVE_ADDR		0x12
-#define ST_LSM6DSX_REG_HLACTIVE_MASK		BIT(5)
-#define ST_LSM6DSX_REG_PP_OD_ADDR		0x12
-#define ST_LSM6DSX_REG_PP_OD_MASK		BIT(4)
+#define ST_LSM6DSX_TS_SENSITIVITY		25000UL /* 25us */
 
 static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
 	ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
@@ -97,14 +89,26 @@ static const struct iio_chan_spec st_lsm6ds0_gyro_channels[] = {
 static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	{
 		.wai = 0x68,
-		.int1_addr = 0x0c,
-		.int2_addr = 0x0d,
-		.reset_addr = 0x22,
+		.reset = {
+			.addr = 0x22,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x22,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x22,
+			.mask = BIT(6),
+		},
 		.max_fifo_size = 32,
 		.id = {
 			{
 				.hw_id = ST_LSM9DS1_ID,
 				.name = ST_LSM9DS1_DEV_NAME,
+			}, {
+				.hw_id = ST_LSM6DS0_ID,
+				.name = ST_LSM6DS0_DEV_NAME,
 			},
 		},
 		.channels = {
@@ -160,21 +164,46 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 					.addr = 0x10,
 					.mask = GENMASK(4, 3),
 				},
-				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(245), 0x0 },
-				.fs_avl[1] = {  IIO_DEGREE_TO_RAD(500), 0x1 },
-				.fs_avl[2] = { IIO_DEGREE_TO_RAD(2000), 0x3 },
+
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
 				.fs_len = 3,
 			},
 		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0c,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.hla = {
+				.addr = 0x22,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x22,
+				.mask = BIT(4),
+			},
+		},
 	},
 	{
 		.wai = 0x69,
-		.int1_addr = 0x0d,
-		.int2_addr = 0x0e,
-		.int1_func_addr = 0x5e,
-		.int2_func_addr = 0x5f,
-		.int_func_mask = BIT(5),
-		.reset_addr = 0x12,
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
 		.max_fifo_size = 1365,
 		.id = {
 			{
@@ -242,6 +271,36 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_len = 4,
 			},
 		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x58,
+				.mask = BIT(0),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
 		.decimator = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.addr = 0x08,
@@ -252,10 +311,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = GENMASK(5, 3),
 			},
 		},
-		.lir = {
-			.addr = 0x58,
-			.mask = BIT(0),
-		},
 		.fifo_ops = {
 			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_fifo,
@@ -301,12 +356,18 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	},
 	{
 		.wai = 0x69,
-		.int1_addr = 0x0d,
-		.int2_addr = 0x0e,
-		.int1_func_addr = 0x5e,
-		.int2_func_addr = 0x5f,
-		.int_func_mask = BIT(5),
-		.reset_addr = 0x12,
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
 		.max_fifo_size = 682,
 		.id = {
 			{
@@ -374,6 +435,36 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_len = 4,
 			},
 		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x58,
+				.mask = BIT(0),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
 		.decimator = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.addr = 0x08,
@@ -384,10 +475,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = GENMASK(5, 3),
 			},
 		},
-		.lir = {
-			.addr = 0x58,
-			.mask = BIT(0),
-		},
 		.fifo_ops = {
 			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_fifo,
@@ -433,12 +520,18 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	},
 	{
 		.wai = 0x6a,
-		.int1_addr = 0x0d,
-		.int2_addr = 0x0e,
-		.int1_func_addr = 0x5e,
-		.int2_func_addr = 0x5f,
-		.int_func_mask = BIT(5),
-		.reset_addr = 0x12,
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
 		.max_fifo_size = 682,
 		.id = {
 			{
@@ -515,6 +608,36 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_len = 4,
 			},
 		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x58,
+				.mask = BIT(0),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
 		.decimator = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.addr = 0x08,
@@ -525,10 +648,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = GENMASK(5, 3),
 			},
 		},
-		.lir = {
-			.addr = 0x58,
-			.mask = BIT(0),
-		},
 		.fifo_ops = {
 			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_fifo,
@@ -578,9 +697,18 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	},
 	{
 		.wai = 0x6c,
-		.int1_addr = 0x0d,
-		.int2_addr = 0x0e,
-		.reset_addr = 0x12,
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
 		.max_fifo_size = 512,
 		.id = {
 			{
@@ -601,6 +729,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
 			},
 		},
+		.drdy_mask = {
+			.addr = 0x13,
+			.mask = BIT(3),
+		},
 		.odr_table = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.reg = {
@@ -651,6 +783,40 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_len = 4,
 			},
 		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x56,
+				.mask = BIT(0),
+			},
+			.clear_on_read = {
+				.addr = 0x56,
+				.mask = BIT(6),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
 		.batch = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.addr = 0x09,
@@ -661,14 +827,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = GENMASK(7, 4),
 			},
 		},
-		.lir = {
-			.addr = 0x56,
-			.mask = BIT(0),
-		},
-		.clear_on_read = {
-			.addr = 0x56,
-			.mask = BIT(6),
-		},
 		.fifo_ops = {
 			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_tagged_fifo,
@@ -691,6 +849,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x0a,
 				.mask = GENMASK(7, 6),
 			},
+			.freq_fine = 0x63,
 		},
 		.shub_settings = {
 			.page_mux = {
@@ -717,16 +876,37 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			.slv0_addr = 0x15,
 			.dw_slv0_addr = 0x21,
 			.batch_en = BIT(3),
-		}
+		},
+		.event_settings = {
+			.enable_reg = {
+				.addr = 0x58,
+				.mask = BIT(7),
+			},
+			.wakeup_reg = {
+				.addr = 0x5b,
+				.mask = GENMASK(5, 0),
+			},
+			.wakeup_src_reg = 0x1b,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
+		},
 	},
 	{
 		.wai = 0x6b,
-		.int1_addr = 0x0d,
-		.int2_addr = 0x0e,
-		.int1_func_addr = 0x5e,
-		.int2_func_addr = 0x5f,
-		.int_func_mask = BIT(5),
-		.reset_addr = 0x12,
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
 		.max_fifo_size = 512,
 		.id = {
 			{
@@ -744,6 +924,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
 			},
 		},
+		.drdy_mask = {
+			.addr = 0x13,
+			.mask = BIT(3),
+		},
 		.odr_table = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.reg = {
@@ -794,6 +978,40 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_len = 4,
 			},
 		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x56,
+				.mask = BIT(0),
+			},
+			.clear_on_read = {
+				.addr = 0x56,
+				.mask = BIT(6),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
 		.batch = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.addr = 0x09,
@@ -804,14 +1022,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = GENMASK(7, 4),
 			},
 		},
-		.lir = {
-			.addr = 0x56,
-			.mask = BIT(0),
-		},
-		.clear_on_read = {
-			.addr = 0x56,
-			.mask = BIT(6),
-		},
 		.fifo_ops = {
 			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_tagged_fifo,
@@ -834,6 +1044,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x0a,
 				.mask = GENMASK(7, 6),
 			},
+			.freq_fine = 0x63,
 		},
 		.event_settings = {
 			.enable_reg = {
@@ -853,12 +1064,18 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	},
 	{
 		.wai = 0x6b,
-		.int1_addr = 0x0d,
-		.int2_addr = 0x0e,
-		.int1_func_addr = 0x5e,
-		.int2_func_addr = 0x5f,
-		.int_func_mask = BIT(5),
-		.reset_addr = 0x12,
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
 		.max_fifo_size = 512,
 		.id = {
 			{
@@ -867,6 +1084,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			}, {
 				.hw_id = ST_ISM330DHCX_ID,
 				.name = ST_ISM330DHCX_DEV_NAME,
+			}, {
+				.hw_id = ST_LSM6DSRX_ID,
+				.name = ST_LSM6DSRX_DEV_NAME,
 			},
 		},
 		.channels = {
@@ -879,6 +1099,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
 			},
 		},
+		.drdy_mask = {
+			.addr = 0x13,
+			.mask = BIT(3),
+		},
 		.odr_table = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.reg = {
@@ -929,6 +1153,40 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_len = 4,
 			},
 		},
+		.irq_config = {
+			.irq1 = {
+				.addr = 0x0d,
+				.mask = BIT(3),
+			},
+			.irq2 = {
+				.addr = 0x0e,
+				.mask = BIT(3),
+			},
+			.lir = {
+				.addr = 0x56,
+				.mask = BIT(0),
+			},
+			.clear_on_read = {
+				.addr = 0x56,
+				.mask = BIT(6),
+			},
+			.irq1_func = {
+				.addr = 0x5e,
+				.mask = BIT(5),
+			},
+			.irq2_func = {
+				.addr = 0x5f,
+				.mask = BIT(5),
+			},
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
 		.batch = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.addr = 0x09,
@@ -939,14 +1197,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = GENMASK(7, 4),
 			},
 		},
-		.lir = {
-			.addr = 0x56,
-			.mask = BIT(0),
-		},
-		.clear_on_read = {
-			.addr = 0x56,
-			.mask = BIT(6),
-		},
 		.fifo_ops = {
 			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_tagged_fifo,
@@ -969,6 +1219,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x0a,
 				.mask = GENMASK(7, 6),
 			},
+			.freq_fine = 0x63,
 		},
 		.shub_settings = {
 			.page_mux = {
@@ -1293,27 +1544,26 @@ static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev,
 
 static int st_lsm6dsx_event_setup(struct st_lsm6dsx_hw *hw, int state)
 {
+	const struct st_lsm6dsx_reg *reg;
+	unsigned int data;
 	int err;
-	u8 enable = 0;
 
-	if (!hw->settings->int1_func_addr)
+	if (!hw->settings->irq_config.irq1_func.addr)
 		return -ENOTSUPP;
 
-	enable = state ? hw->settings->event_settings.enable_reg.mask : 0;
-
-	err = regmap_update_bits(hw->regmap,
-				 hw->settings->event_settings.enable_reg.addr,
-				 hw->settings->event_settings.enable_reg.mask,
-				 enable);
-	if (err < 0)
-		return err;
-
-	enable = state ? hw->irq_routing.mask : 0;
+	reg = &hw->settings->event_settings.enable_reg;
+	if (reg->addr) {
+		data = ST_LSM6DSX_SHIFT_VAL(state, reg->mask);
+		err = st_lsm6dsx_update_bits_locked(hw, reg->addr,
+						    reg->mask, data);
+		if (err < 0)
+			return err;
+	}
 
 	/* Enable wakeup interrupt */
-	return regmap_update_bits(hw->regmap, hw->irq_routing.addr,
-				  hw->irq_routing.mask,
-				  enable);
+	data = ST_LSM6DSX_SHIFT_VAL(state, hw->irq_routing->mask);
+	return st_lsm6dsx_update_bits_locked(hw, hw->irq_routing->addr,
+					     hw->irq_routing->mask, data);
 }
 
 static int st_lsm6dsx_read_event(struct iio_dev *iio_dev,
@@ -1335,15 +1585,18 @@ static int st_lsm6dsx_read_event(struct iio_dev *iio_dev,
 	return IIO_VAL_INT;
 }
 
-static int st_lsm6dsx_write_event(struct iio_dev *iio_dev,
-				    const struct iio_chan_spec *chan,
-				    enum iio_event_type type,
-				    enum iio_event_direction dir,
-				    enum iio_event_info info,
-				    int val, int val2)
+static int
+st_lsm6dsx_write_event(struct iio_dev *iio_dev,
+		       const struct iio_chan_spec *chan,
+		       enum iio_event_type type,
+		       enum iio_event_direction dir,
+		       enum iio_event_info info,
+		       int val, int val2)
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
 	struct st_lsm6dsx_hw *hw = sensor->hw;
+	const struct st_lsm6dsx_reg *reg;
+	unsigned int data;
 	int err;
 
 	if (type != IIO_EV_TYPE_THRESH)
@@ -1352,11 +1605,11 @@ static int st_lsm6dsx_write_event(struct iio_dev *iio_dev,
 	if (val < 0 || val > 31)
 		return -EINVAL;
 
-	err = regmap_update_bits(hw->regmap,
-				 hw->settings->event_settings.wakeup_reg.addr,
-				 hw->settings->event_settings.wakeup_reg.mask,
-				 val);
-	if (err)
+	reg = &hw->settings->event_settings.wakeup_reg;
+	data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
+	err = st_lsm6dsx_update_bits_locked(hw, reg->addr,
+					    reg->mask, data);
+	if (err < 0)
 		return -EINVAL;
 
 	hw->event_threshold = val;
@@ -1364,10 +1617,11 @@ static int st_lsm6dsx_write_event(struct iio_dev *iio_dev,
 	return 0;
 }
 
-static int st_lsm6dsx_read_event_config(struct iio_dev *iio_dev,
-					  const struct iio_chan_spec *chan,
-					  enum iio_event_type type,
-					  enum iio_event_direction dir)
+static int
+st_lsm6dsx_read_event_config(struct iio_dev *iio_dev,
+			     const struct iio_chan_spec *chan,
+			     enum iio_event_type type,
+			     enum iio_event_direction dir)
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
 	struct st_lsm6dsx_hw *hw = sensor->hw;
@@ -1378,11 +1632,11 @@ static int st_lsm6dsx_read_event_config(struct iio_dev *iio_dev,
 	return !!(hw->enable_event & BIT(chan->channel2));
 }
 
-static int st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
-					   const struct iio_chan_spec *chan,
-					   enum iio_event_type type,
-					   enum iio_event_direction dir,
-					   int state)
+static int
+st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
+			      const struct iio_chan_spec *chan,
+			      enum iio_event_type type,
+			      enum iio_event_direction dir, int state)
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
 	struct st_lsm6dsx_hw *hw = sensor->hw;
@@ -1414,7 +1668,9 @@ static int st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
 	if (err < 0)
 		return err;
 
+	mutex_lock(&hw->conf_lock);
 	err = st_lsm6dsx_sensor_set_enable(sensor, state);
+	mutex_unlock(&hw->conf_lock);
 	if (err < 0)
 		return err;
 
@@ -1537,7 +1793,9 @@ static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
 	return of_property_read_u32(np, "st,drdy-int-pin", drdy_pin);
 }
 
-static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
+static int
+st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
+			const struct st_lsm6dsx_reg **drdy_reg)
 {
 	int err = 0, drdy_pin;
 
@@ -1551,14 +1809,12 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
 
 	switch (drdy_pin) {
 	case 1:
-		*drdy_reg = hw->settings->int1_addr;
-		hw->irq_routing.addr = hw->settings->int1_func_addr;
-		hw->irq_routing.mask = hw->settings->int_func_mask;
+		hw->irq_routing = &hw->settings->irq_config.irq1_func;
+		*drdy_reg = &hw->settings->irq_config.irq1;
 		break;
 	case 2:
-		*drdy_reg = hw->settings->int2_addr;
-		hw->irq_routing.addr = hw->settings->int2_func_addr;
-		hw->irq_routing.mask = hw->settings->int_func_mask;
+		hw->irq_routing = &hw->settings->irq_config.irq2_func;
+		*drdy_reg = &hw->settings->irq_config.irq2;
 		break;
 	default:
 		dev_err(hw->dev, "unsupported data ready pin\n");
@@ -1649,74 +1905,95 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
 		if (err < 0)
 			return err;
 	}
+
+	/* calibrate timestamp sensitivity */
+	hw->ts_gain = ST_LSM6DSX_TS_SENSITIVITY;
+	if (ts_settings->freq_fine) {
+		err = regmap_read(hw->regmap, ts_settings->freq_fine, &val);
+		if (err < 0)
+			return err;
+
+		/*
+		 * linearize the AN5192 formula:
+		 * 1 / (1 + x) ~= 1 - x (Taylor’s Series)
+		 * ttrim[s] = 1 / (40000 * (1 + 0.0015 * val))
+		 * ttrim[ns] ~= 25000 - 37.5 * val
+		 * ttrim[ns] ~= 25000 - (37500 * val) / 1000
+		 */
+		hw->ts_gain -= ((s8)val * 37500) / 1000;
+	}
+
 	return 0;
 }
 
 static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
 {
-	u8 drdy_int_reg;
+	const struct st_lsm6dsx_reg *reg;
 	int err;
 
 	/* device sw reset */
-	err = regmap_update_bits(hw->regmap, hw->settings->reset_addr,
-				 ST_LSM6DSX_REG_RESET_MASK,
-				 FIELD_PREP(ST_LSM6DSX_REG_RESET_MASK, 1));
+	reg = &hw->settings->reset;
+	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+				 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
 	if (err < 0)
 		return err;
 
 	msleep(50);
 
 	/* reload trimming parameter */
-	err = regmap_update_bits(hw->regmap, hw->settings->reset_addr,
-				 ST_LSM6DSX_REG_BOOT_MASK,
-				 FIELD_PREP(ST_LSM6DSX_REG_BOOT_MASK, 1));
+	reg = &hw->settings->boot;
+	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+				 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
 	if (err < 0)
 		return err;
 
 	msleep(50);
 
 	/* enable Block Data Update */
-	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_BDU_ADDR,
-				 ST_LSM6DSX_REG_BDU_MASK,
-				 FIELD_PREP(ST_LSM6DSX_REG_BDU_MASK, 1));
+	reg = &hw->settings->bdu;
+	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+				 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
 	if (err < 0)
 		return err;
 
 	/* enable FIFO watermak interrupt */
-	err = st_lsm6dsx_get_drdy_reg(hw, &drdy_int_reg);
+	err = st_lsm6dsx_get_drdy_reg(hw, &reg);
 	if (err < 0)
 		return err;
 
-	err = regmap_update_bits(hw->regmap, drdy_int_reg,
-				 ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK,
-				 FIELD_PREP(ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK,
-					    1));
+	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+				 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
 	if (err < 0)
 		return err;
 
 	/* enable Latched interrupts for device events */
-	if (hw->settings->lir.addr) {
-		unsigned int data;
-
-		data = ST_LSM6DSX_SHIFT_VAL(1, hw->settings->lir.mask);
-		err = regmap_update_bits(hw->regmap, hw->settings->lir.addr,
-					 hw->settings->lir.mask, data);
+	if (hw->settings->irq_config.lir.addr) {
+		reg = &hw->settings->irq_config.lir;
+		err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+					 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
 		if (err < 0)
 			return err;
 
 		/* enable clear on read for latched interrupts */
-		if (hw->settings->clear_on_read.addr) {
-			data = ST_LSM6DSX_SHIFT_VAL(1,
-					hw->settings->clear_on_read.mask);
+		if (hw->settings->irq_config.clear_on_read.addr) {
+			reg = &hw->settings->irq_config.clear_on_read;
 			err = regmap_update_bits(hw->regmap,
-					hw->settings->clear_on_read.addr,
-					hw->settings->clear_on_read.mask,
-					data);
+					reg->addr, reg->mask,
+					ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
 			if (err < 0)
 				return err;
 		}
 	}
 
+	/* enable drdy-mas if available */
+	if (hw->settings->drdy_mask.addr) {
+		reg = &hw->settings->drdy_mask;
+		err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+					 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
+		if (err < 0)
+			return err;
+	}
+
 	err = st_lsm6dsx_init_shub(hw);
 	if (err < 0)
 		return err;
@@ -1767,10 +2044,23 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	return iio_dev;
 }
 
-static void st_lsm6dsx_report_motion_event(struct st_lsm6dsx_hw *hw, int data)
+static bool
+st_lsm6dsx_report_motion_event(struct st_lsm6dsx_hw *hw)
 {
-	s64 timestamp = iio_get_time_ns(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+	const struct st_lsm6dsx_event_settings *event_settings;
+	int err, data;
+	s64 timestamp;
+
+	if (!hw->enable_event)
+		return false;
+
+	event_settings = &hw->settings->event_settings;
+	err = st_lsm6dsx_read_locked(hw, event_settings->wakeup_src_reg,
+				     &data, sizeof(data));
+	if (err < 0)
+		return false;
 
+	timestamp = iio_get_time_ns(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
 	if ((data & hw->settings->event_settings.wakeup_src_z_mask) &&
 	    (hw->enable_event & BIT(IIO_MOD_Z)))
 		iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
@@ -1800,36 +2090,33 @@ static void st_lsm6dsx_report_motion_event(struct st_lsm6dsx_hw *hw, int data)
 						  IIO_EV_TYPE_THRESH,
 						  IIO_EV_DIR_EITHER),
 						  timestamp);
+
+	return data & event_settings->wakeup_src_status_mask;
 }
 
 static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
 {
 	struct st_lsm6dsx_hw *hw = private;
+	bool event;
 	int count;
-	int data, err;
 
-	if (hw->enable_event) {
-		err = regmap_read(hw->regmap,
-				  hw->settings->event_settings.wakeup_src_reg,
-				  &data);
-		if (err < 0)
-			return IRQ_NONE;
+	event = st_lsm6dsx_report_motion_event(hw);
 
-		if (data & hw->settings->event_settings.wakeup_src_status_mask)
-			st_lsm6dsx_report_motion_event(hw, data);
-	}
+	if (!hw->settings->fifo_ops.read_fifo)
+		return event ? IRQ_HANDLED : IRQ_NONE;
 
 	mutex_lock(&hw->fifo_lock);
 	count = hw->settings->fifo_ops.read_fifo(hw);
 	mutex_unlock(&hw->fifo_lock);
 
-	return count ? IRQ_HANDLED : IRQ_NONE;
+	return count || event ? IRQ_HANDLED : IRQ_NONE;
 }
 
 static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
 {
-	struct st_sensors_platform_data *pdata;
 	struct device_node *np = hw->dev->of_node;
+	struct st_sensors_platform_data *pdata;
+	const struct st_lsm6dsx_reg *reg;
 	unsigned long irq_type;
 	bool irq_active_low;
 	int err;
@@ -1850,20 +2137,19 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
 		return -EINVAL;
 	}
 
-	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_HLACTIVE_ADDR,
-				 ST_LSM6DSX_REG_HLACTIVE_MASK,
-				 FIELD_PREP(ST_LSM6DSX_REG_HLACTIVE_MASK,
-					    irq_active_low));
+	reg = &hw->settings->irq_config.hla;
+	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+				 ST_LSM6DSX_SHIFT_VAL(irq_active_low,
+						      reg->mask));
 	if (err < 0)
 		return err;
 
 	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
 	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
 	    (pdata && pdata->open_drain)) {
-		err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_PP_OD_ADDR,
-					 ST_LSM6DSX_REG_PP_OD_MASK,
-					 FIELD_PREP(ST_LSM6DSX_REG_PP_OD_MASK,
-						    1));
+		reg = &hw->settings->irq_config.od;
+		err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+					 ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
 		if (err < 0)
 			return err;
 
@@ -1887,7 +2173,9 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
 int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 		     struct regmap *regmap)
 {
+	struct st_sensors_platform_data *pdata = dev->platform_data;
 	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct device_node *np = dev->of_node;
 	struct st_lsm6dsx_hw *hw;
 	const char *name = NULL;
 	int i, err;
@@ -1950,7 +2238,8 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 			return err;
 	}
 
-	if (dev->of_node && of_property_read_bool(dev->of_node, "wakeup-source"))
+	if ((np && of_property_read_bool(np, "wakeup-source")) ||
+	    (pdata && pdata->wakeup_source))
 		device_init_wakeup(dev, true);
 
 	return 0;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index f52511059545..cd47ec1fedcb 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -87,6 +87,14 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
 		.compatible = "st,lsm9ds1-imu",
 		.data = (void *)ST_LSM9DS1_ID,
 	},
+	{
+		.compatible = "st,lsm6ds0",
+		.data = (void *)ST_LSM6DS0_ID,
+	},
+	{
+		.compatible = "st,lsm6dsrx",
+		.data = (void *)ST_LSM6DSRX_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -104,6 +112,8 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
 	{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
 	{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
 	{ ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID },
+	{ ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID },
+	{ ST_LSM6DSRX_DEV_NAME, ST_LSM6DSRX_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index 344b28dddebb..67ff36eac247 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -87,6 +87,14 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
 		.compatible = "st,lsm9ds1-imu",
 		.data = (void *)ST_LSM9DS1_ID,
 	},
+	{
+		.compatible = "st,lsm6ds0",
+		.data = (void *)ST_LSM6DS0_ID,
+	},
+	{
+		.compatible = "st,lsm6dsrx",
+		.data = (void *)ST_LSM6DSRX_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -104,6 +112,8 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
 	{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
 	{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
 	{ ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID },
+	{ ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID },
+	{ ST_LSM6DSRX_DEV_NAME, ST_LSM6DSRX_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 4a1a883dc061..d793c1541705 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -32,6 +32,17 @@ config ADJD_S311
 	  This driver can also be built as a module.  If so, the module
 	  will be called adjd_s311.
 
+config ADUX1020
+	tristate "ADUX1020 photometric sensor"
+	select REGMAP_I2C
+	depends on I2C
+	help
+	 Say Y here if you want to build a driver for the Analog Devices
+	 ADUX1020 photometric sensor.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called adux1020.
+
 config AL3320A
 	tristate "AL3320A ambient light sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 00d1f9b98f39..5d650ce46a40 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -6,6 +6,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ACPI_ALS)		+= acpi-als.o
 obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
+obj-$(CONFIG_ADUX1020)		+= adux1020.o
 obj-$(CONFIG_AL3320A)		+= al3320a.o
 obj-$(CONFIG_APDS9300)		+= apds9300.o
 obj-$(CONFIG_APDS9960)		+= apds9960.o
diff --git a/drivers/iio/light/adux1020.c b/drivers/iio/light/adux1020.c
new file mode 100644
index 000000000000..b07797ac10d7
--- /dev/null
+++ b/drivers/iio/light/adux1020.c
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * adux1020.c - Support for Analog Devices ADUX1020 photometric sensor
+ *
+ * Copyright (C) 2019 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ *
+ * TODO: Triggered buffer support
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+
+#define ADUX1020_REGMAP_NAME		"adux1020_regmap"
+#define ADUX1020_DRV_NAME		"adux1020"
+
+/* System registers */
+#define ADUX1020_REG_CHIP_ID		0x08
+#define ADUX1020_REG_SLAVE_ADDRESS	0x09
+
+#define ADUX1020_REG_SW_RESET		0x0f
+#define ADUX1020_REG_INT_ENABLE		0x1c
+#define ADUX1020_REG_INT_POLARITY	0x1d
+#define ADUX1020_REG_PROX_TH_ON1	0x2a
+#define ADUX1020_REG_PROX_TH_OFF1	0x2b
+#define	ADUX1020_REG_PROX_TYPE		0x2f
+#define	ADUX1020_REG_TEST_MODES_3	0x32
+#define	ADUX1020_REG_FORCE_MODE		0x33
+#define	ADUX1020_REG_FREQUENCY		0x40
+#define ADUX1020_REG_LED_CURRENT	0x41
+#define	ADUX1020_REG_OP_MODE		0x45
+#define	ADUX1020_REG_INT_MASK		0x48
+#define	ADUX1020_REG_INT_STATUS		0x49
+#define	ADUX1020_REG_DATA_BUFFER	0x60
+
+/* Chip ID bits */
+#define ADUX1020_CHIP_ID_MASK		GENMASK(11, 0)
+#define ADUX1020_CHIP_ID		0x03fc
+
+#define ADUX1020_SW_RESET		BIT(1)
+#define ADUX1020_FIFO_FLUSH		BIT(15)
+#define ADUX1020_OP_MODE_MASK		GENMASK(3, 0)
+#define ADUX1020_DATA_OUT_MODE_MASK	GENMASK(7, 4)
+#define ADUX1020_DATA_OUT_PROX_I	FIELD_PREP(ADUX1020_DATA_OUT_MODE_MASK, 1)
+
+#define ADUX1020_MODE_INT_MASK		GENMASK(7, 0)
+#define ADUX1020_INT_ENABLE		0x2094
+#define ADUX1020_INT_DISABLE		0x2090
+#define ADUX1020_PROX_INT_ENABLE	0x00f0
+#define ADUX1020_PROX_ON1_INT		BIT(0)
+#define ADUX1020_PROX_OFF1_INT		BIT(1)
+#define ADUX1020_FIFO_INT_ENABLE	0x7f
+#define ADUX1020_MODE_INT_DISABLE	0xff
+#define ADUX1020_MODE_INT_STATUS_MASK	GENMASK(7, 0)
+#define ADUX1020_FIFO_STATUS_MASK	GENMASK(15, 8)
+#define ADUX1020_INT_CLEAR		0xff
+#define ADUX1020_PROX_TYPE		BIT(15)
+
+#define ADUX1020_INT_PROX_ON1		BIT(0)
+#define ADUX1020_INT_PROX_OFF1		BIT(1)
+
+#define ADUX1020_FORCE_CLOCK_ON		0x0f4f
+#define ADUX1020_FORCE_CLOCK_RESET	0x0040
+#define ADUX1020_ACTIVE_4_STATE		0x0008
+
+#define ADUX1020_PROX_FREQ_MASK		GENMASK(7, 4)
+#define ADUX1020_PROX_FREQ(x)		FIELD_PREP(ADUX1020_PROX_FREQ_MASK, x)
+
+#define ADUX1020_LED_CURRENT_MASK	GENMASK(3, 0)
+#define ADUX1020_LED_PIREF_EN		BIT(12)
+
+/* Operating modes */
+enum adux1020_op_modes {
+	ADUX1020_MODE_STANDBY,
+	ADUX1020_MODE_PROX_I,
+	ADUX1020_MODE_PROX_XY,
+	ADUX1020_MODE_GEST,
+	ADUX1020_MODE_SAMPLE,
+	ADUX1020_MODE_FORCE = 0x0e,
+	ADUX1020_MODE_IDLE = 0x0f,
+};
+
+struct adux1020_data {
+	struct i2c_client *client;
+	struct iio_dev *indio_dev;
+	struct mutex lock;
+	struct regmap *regmap;
+};
+
+struct adux1020_mode_data {
+	u8 bytes;
+	u8 buf_len;
+	u16 int_en;
+};
+
+static const struct adux1020_mode_data adux1020_modes[] = {
+	[ADUX1020_MODE_PROX_I] = {
+		.bytes = 2,
+		.buf_len = 1,
+		.int_en = ADUX1020_PROX_INT_ENABLE,
+	},
+};
+
+static const struct regmap_config adux1020_regmap_config = {
+	.name = ADUX1020_REGMAP_NAME,
+	.reg_bits = 8,
+	.val_bits = 16,
+	.max_register = 0x6F,
+	.cache_type = REGCACHE_NONE,
+};
+
+static const struct reg_sequence adux1020_def_conf[] = {
+	{ 0x000c, 0x000f },
+	{ 0x0010, 0x1010 },
+	{ 0x0011, 0x004c },
+	{ 0x0012, 0x5f0c },
+	{ 0x0013, 0xada5 },
+	{ 0x0014, 0x0080 },
+	{ 0x0015, 0x0000 },
+	{ 0x0016, 0x0600 },
+	{ 0x0017, 0x0000 },
+	{ 0x0018, 0x2693 },
+	{ 0x0019, 0x0004 },
+	{ 0x001a, 0x4280 },
+	{ 0x001b, 0x0060 },
+	{ 0x001c, 0x2094 },
+	{ 0x001d, 0x0020 },
+	{ 0x001e, 0x0001 },
+	{ 0x001f, 0x0100 },
+	{ 0x0020, 0x0320 },
+	{ 0x0021, 0x0A13 },
+	{ 0x0022, 0x0320 },
+	{ 0x0023, 0x0113 },
+	{ 0x0024, 0x0000 },
+	{ 0x0025, 0x2412 },
+	{ 0x0026, 0x2412 },
+	{ 0x0027, 0x0022 },
+	{ 0x0028, 0x0000 },
+	{ 0x0029, 0x0300 },
+	{ 0x002a, 0x0700 },
+	{ 0x002b, 0x0600 },
+	{ 0x002c, 0x6000 },
+	{ 0x002d, 0x4000 },
+	{ 0x002e, 0x0000 },
+	{ 0x002f, 0x0000 },
+	{ 0x0030, 0x0000 },
+	{ 0x0031, 0x0000 },
+	{ 0x0032, 0x0040 },
+	{ 0x0033, 0x0008 },
+	{ 0x0034, 0xE400 },
+	{ 0x0038, 0x8080 },
+	{ 0x0039, 0x8080 },
+	{ 0x003a, 0x2000 },
+	{ 0x003b, 0x1f00 },
+	{ 0x003c, 0x2000 },
+	{ 0x003d, 0x2000 },
+	{ 0x003e, 0x0000 },
+	{ 0x0040, 0x8069 },
+	{ 0x0041, 0x1f2f },
+	{ 0x0042, 0x4000 },
+	{ 0x0043, 0x0000 },
+	{ 0x0044, 0x0008 },
+	{ 0x0046, 0x0000 },
+	{ 0x0048, 0x00ef },
+	{ 0x0049, 0x0000 },
+	{ 0x0045, 0x0000 },
+};
+
+static const int adux1020_rates[][2] = {
+	{ 0, 100000 },
+	{ 0, 200000 },
+	{ 0, 500000 },
+	{ 1, 0 },
+	{ 2, 0 },
+	{ 5, 0 },
+	{ 10, 0 },
+	{ 20, 0 },
+	{ 50, 0 },
+	{ 100, 0 },
+	{ 190, 0 },
+	{ 450, 0 },
+	{ 820, 0 },
+	{ 1400, 0 },
+};
+
+static const int adux1020_led_currents[][2] = {
+	{ 0, 25000 },
+	{ 0, 40000 },
+	{ 0, 55000 },
+	{ 0, 70000 },
+	{ 0, 85000 },
+	{ 0, 100000 },
+	{ 0, 115000 },
+	{ 0, 130000 },
+	{ 0, 145000 },
+	{ 0, 160000 },
+	{ 0, 175000 },
+	{ 0, 190000 },
+	{ 0, 205000 },
+	{ 0, 220000 },
+	{ 0, 235000 },
+	{ 0, 250000 },
+};
+
+static int adux1020_flush_fifo(struct adux1020_data *data)
+{
+	int ret;
+
+	/* Force Idle mode */
+	ret = regmap_write(data->regmap, ADUX1020_REG_FORCE_MODE,
+			   ADUX1020_ACTIVE_4_STATE);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE,
+				 ADUX1020_OP_MODE_MASK, ADUX1020_MODE_FORCE);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE,
+				 ADUX1020_OP_MODE_MASK, ADUX1020_MODE_IDLE);
+	if (ret < 0)
+		return ret;
+
+	/* Flush FIFO */
+	ret = regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3,
+			   ADUX1020_FORCE_CLOCK_ON);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(data->regmap, ADUX1020_REG_INT_STATUS,
+			   ADUX1020_FIFO_FLUSH);
+	if (ret < 0)
+		return ret;
+
+	return regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3,
+			    ADUX1020_FORCE_CLOCK_RESET);
+}
+
+static int adux1020_read_fifo(struct adux1020_data *data, u16 *buf, u8 buf_len)
+{
+	unsigned int regval;
+	int i, ret;
+
+	/* Enable 32MHz clock */
+	ret = regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3,
+			   ADUX1020_FORCE_CLOCK_ON);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < buf_len; i++) {
+		ret = regmap_read(data->regmap, ADUX1020_REG_DATA_BUFFER,
+				  &regval);
+		if (ret < 0)
+			return ret;
+
+		buf[i] = regval;
+	}
+
+	/* Set 32MHz clock to be controlled by internal state machine */
+	return regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3,
+			    ADUX1020_FORCE_CLOCK_RESET);
+}
+
+static int adux1020_set_mode(struct adux1020_data *data,
+			     enum adux1020_op_modes mode)
+{
+	int ret;
+
+	/* Switch to standby mode before changing the mode */
+	ret = regmap_write(data->regmap, ADUX1020_REG_OP_MODE,
+			   ADUX1020_MODE_STANDBY);
+	if (ret < 0)
+		return ret;
+
+	/* Set data out and switch to the desired mode */
+	switch (mode) {
+	case ADUX1020_MODE_PROX_I:
+		ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE,
+					 ADUX1020_DATA_OUT_MODE_MASK,
+					 ADUX1020_DATA_OUT_PROX_I);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE,
+					 ADUX1020_OP_MODE_MASK,
+					 ADUX1020_MODE_PROX_I);
+		if (ret < 0)
+			return ret;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int adux1020_measure(struct adux1020_data *data,
+			    enum adux1020_op_modes mode,
+			    u16 *val)
+{
+	unsigned int status;
+	int ret, tries = 50;
+
+	/* Disable INT pin as polling is going to be used */
+	ret = regmap_write(data->regmap, ADUX1020_REG_INT_ENABLE,
+			   ADUX1020_INT_DISABLE);
+	if (ret < 0)
+		return ret;
+
+	/* Enable mode interrupt */
+	ret = regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK,
+				 ADUX1020_MODE_INT_MASK,
+				 adux1020_modes[mode].int_en);
+	if (ret < 0)
+		return ret;
+
+	while (tries--) {
+		ret = regmap_read(data->regmap, ADUX1020_REG_INT_STATUS,
+				  &status);
+		if (ret < 0)
+			return ret;
+
+		status &= ADUX1020_FIFO_STATUS_MASK;
+		if (status >= adux1020_modes[mode].bytes)
+			break;
+		msleep(20);
+	}
+
+	if (tries < 0)
+		return -EIO;
+
+	ret = adux1020_read_fifo(data, val, adux1020_modes[mode].buf_len);
+	if (ret < 0)
+		return ret;
+
+	/* Clear mode interrupt */
+	ret = regmap_write(data->regmap, ADUX1020_REG_INT_STATUS,
+			   (~adux1020_modes[mode].int_en));
+	if (ret < 0)
+		return ret;
+
+	/* Disable mode interrupts */
+	return regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK,
+				  ADUX1020_MODE_INT_MASK,
+				  ADUX1020_MODE_INT_DISABLE);
+}
+
+static int adux1020_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct adux1020_data *data = iio_priv(indio_dev);
+	u16 buf[3];
+	int ret = -EINVAL;
+	unsigned int regval;
+
+	mutex_lock(&data->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_PROXIMITY:
+			ret = adux1020_set_mode(data, ADUX1020_MODE_PROX_I);
+			if (ret < 0)
+				goto fail;
+
+			ret = adux1020_measure(data, ADUX1020_MODE_PROX_I, buf);
+			if (ret < 0)
+				goto fail;
+
+			*val = buf[0];
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_CURRENT:
+			ret = regmap_read(data->regmap,
+					  ADUX1020_REG_LED_CURRENT, &regval);
+			if (ret < 0)
+				goto fail;
+
+			regval = regval & ADUX1020_LED_CURRENT_MASK;
+
+			*val = adux1020_led_currents[regval][0];
+			*val2 = adux1020_led_currents[regval][1];
+
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		default:
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->type) {
+		case IIO_PROXIMITY:
+			ret = regmap_read(data->regmap, ADUX1020_REG_FREQUENCY,
+					  &regval);
+			if (ret < 0)
+				goto fail;
+
+			regval = FIELD_GET(ADUX1020_PROX_FREQ_MASK, regval);
+
+			*val = adux1020_rates[regval][0];
+			*val2 = adux1020_rates[regval][1];
+
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+fail:
+	mutex_unlock(&data->lock);
+
+	return ret;
+};
+
+static inline int adux1020_find_index(const int array[][2], int count, int val,
+				      int val2)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		if (val == array[i][0] && val2 == array[i][1])
+			return i;
+
+	return -EINVAL;
+}
+
+static int adux1020_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct adux1020_data *data = iio_priv(indio_dev);
+	int i, ret = -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type == IIO_PROXIMITY) {
+			i = adux1020_find_index(adux1020_rates,
+						ARRAY_SIZE(adux1020_rates),
+						val, val2);
+			if (i < 0) {
+				ret = i;
+				goto fail;
+			}
+
+			ret = regmap_update_bits(data->regmap,
+						 ADUX1020_REG_FREQUENCY,
+						 ADUX1020_PROX_FREQ_MASK,
+						 ADUX1020_PROX_FREQ(i));
+		}
+		break;
+	case IIO_CHAN_INFO_PROCESSED:
+		if (chan->type == IIO_CURRENT) {
+			i = adux1020_find_index(adux1020_led_currents,
+					ARRAY_SIZE(adux1020_led_currents),
+					val, val2);
+			if (i < 0) {
+				ret = i;
+				goto fail;
+			}
+
+			ret = regmap_update_bits(data->regmap,
+						 ADUX1020_REG_LED_CURRENT,
+						 ADUX1020_LED_CURRENT_MASK, i);
+		}
+		break;
+	default:
+		break;
+	}
+
+fail:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int adux1020_write_event_config(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir, int state)
+{
+	struct adux1020_data *data = iio_priv(indio_dev);
+	int ret, mask;
+
+	mutex_lock(&data->lock);
+
+	ret = regmap_write(data->regmap, ADUX1020_REG_INT_ENABLE,
+			   ADUX1020_INT_ENABLE);
+	if (ret < 0)
+		goto fail;
+
+	ret = regmap_write(data->regmap, ADUX1020_REG_INT_POLARITY, 0);
+	if (ret < 0)
+		goto fail;
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		if (dir == IIO_EV_DIR_RISING)
+			mask = ADUX1020_PROX_ON1_INT;
+		else
+			mask = ADUX1020_PROX_OFF1_INT;
+
+		if (state)
+			state = 0;
+		else
+			state = mask;
+
+		ret = regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK,
+					 mask, state);
+		if (ret < 0)
+			goto fail;
+
+		/*
+		 * Trigger proximity interrupt when the intensity is above
+		 * or below threshold
+		 */
+		ret = regmap_update_bits(data->regmap, ADUX1020_REG_PROX_TYPE,
+					 ADUX1020_PROX_TYPE,
+					 ADUX1020_PROX_TYPE);
+		if (ret < 0)
+			goto fail;
+
+		/* Set proximity mode */
+		ret = adux1020_set_mode(data, ADUX1020_MODE_PROX_I);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+fail:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int adux1020_read_event_config(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir)
+{
+	struct adux1020_data *data = iio_priv(indio_dev);
+	int ret, mask;
+	unsigned int regval;
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		if (dir == IIO_EV_DIR_RISING)
+			mask = ADUX1020_PROX_ON1_INT;
+		else
+			mask = ADUX1020_PROX_OFF1_INT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_read(data->regmap, ADUX1020_REG_INT_MASK, &regval);
+	if (ret < 0)
+		return ret;
+
+	return !(regval & mask);
+}
+
+static int adux1020_read_thresh(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info, int *val, int *val2)
+{
+	struct adux1020_data *data = iio_priv(indio_dev);
+	u8 reg;
+	int ret;
+	unsigned int regval;
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		if (dir == IIO_EV_DIR_RISING)
+			reg = ADUX1020_REG_PROX_TH_ON1;
+		else
+			reg = ADUX1020_REG_PROX_TH_OFF1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_read(data->regmap, reg, &regval);
+	if (ret < 0)
+		return ret;
+
+	*val = regval;
+
+	return IIO_VAL_INT;
+}
+
+static int adux1020_write_thresh(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir,
+				 enum iio_event_info info, int val, int val2)
+{
+	struct adux1020_data *data = iio_priv(indio_dev);
+	u8 reg;
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		if (dir == IIO_EV_DIR_RISING)
+			reg = ADUX1020_REG_PROX_TH_ON1;
+		else
+			reg = ADUX1020_REG_PROX_TH_OFF1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Full scale threshold value is 0-65535  */
+	if (val < 0 || val > 65535)
+		return -EINVAL;
+
+	return regmap_write(data->regmap, reg, val);
+}
+
+static const struct iio_event_spec adux1020_proximity_event[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec adux1020_channels[] = {
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.event_spec = adux1020_proximity_event,
+		.num_event_specs = ARRAY_SIZE(adux1020_proximity_event),
+	},
+	{
+		.type = IIO_CURRENT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.extend_name = "led",
+		.output = 1,
+	},
+};
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
+		      "0.1 0.2 0.5 1 2 5 10 20 50 100 190 450 820 1400");
+
+static struct attribute *adux1020_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group adux1020_attribute_group = {
+	.attrs = adux1020_attributes,
+};
+
+static const struct iio_info adux1020_info = {
+	.attrs = &adux1020_attribute_group,
+	.read_raw = adux1020_read_raw,
+	.write_raw = adux1020_write_raw,
+	.read_event_config = adux1020_read_event_config,
+	.write_event_config = adux1020_write_event_config,
+	.read_event_value = adux1020_read_thresh,
+	.write_event_value = adux1020_write_thresh,
+};
+
+static irqreturn_t adux1020_interrupt_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct adux1020_data *data = iio_priv(indio_dev);
+	int ret, status;
+
+	ret = regmap_read(data->regmap, ADUX1020_REG_INT_STATUS, &status);
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	status &= ADUX1020_MODE_INT_STATUS_MASK;
+
+	if (status & ADUX1020_INT_PROX_ON1) {
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_RISING),
+			       iio_get_time_ns(indio_dev));
+	}
+
+	if (status & ADUX1020_INT_PROX_OFF1) {
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_FALLING),
+			       iio_get_time_ns(indio_dev));
+	}
+
+	regmap_update_bits(data->regmap, ADUX1020_REG_INT_STATUS,
+			   ADUX1020_MODE_INT_MASK, ADUX1020_INT_CLEAR);
+
+	return IRQ_HANDLED;
+}
+
+static int adux1020_chip_init(struct adux1020_data *data)
+{
+	struct i2c_client *client = data->client;
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(data->regmap, ADUX1020_REG_CHIP_ID, &val);
+	if (ret < 0)
+		return ret;
+
+	if ((val & ADUX1020_CHIP_ID_MASK) != ADUX1020_CHIP_ID) {
+		dev_err(&client->dev, "invalid chip id 0x%04x\n", val);
+		return -ENODEV;
+	}
+
+	dev_dbg(&client->dev, "Detected ADUX1020 with chip id: 0x%04x\n", val);
+
+	ret = regmap_update_bits(data->regmap, ADUX1020_REG_SW_RESET,
+				 ADUX1020_SW_RESET, ADUX1020_SW_RESET);
+	if (ret < 0)
+		return ret;
+
+	/* Load default configuration */
+	ret = regmap_multi_reg_write(data->regmap, adux1020_def_conf,
+				     ARRAY_SIZE(adux1020_def_conf));
+	if (ret < 0)
+		return ret;
+
+	ret = adux1020_flush_fifo(data);
+	if (ret < 0)
+		return ret;
+
+	/* Use LED_IREF for proximity mode */
+	ret = regmap_update_bits(data->regmap, ADUX1020_REG_LED_CURRENT,
+				 ADUX1020_LED_PIREF_EN, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Mask all interrupts */
+	return regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK,
+			   ADUX1020_MODE_INT_MASK, ADUX1020_MODE_INT_DISABLE);
+}
+
+static int adux1020_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct adux1020_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &adux1020_info;
+	indio_dev->name = ADUX1020_DRV_NAME;
+	indio_dev->channels = adux1020_channels;
+	indio_dev->num_channels = ARRAY_SIZE(adux1020_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	data = iio_priv(indio_dev);
+
+	data->regmap = devm_regmap_init_i2c(client, &adux1020_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		dev_err(&client->dev, "regmap initialization failed.\n");
+		return PTR_ERR(data->regmap);
+	}
+
+	data->client = client;
+	data->indio_dev = indio_dev;
+	mutex_init(&data->lock);
+
+	ret = adux1020_chip_init(data);
+	if (ret)
+		return ret;
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, adux1020_interrupt_handler,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					ADUX1020_DRV_NAME, indio_dev);
+		if (ret) {
+			dev_err(&client->dev, "irq request error %d\n", -ret);
+			return ret;
+		}
+	}
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id adux1020_id[] = {
+	{ "adux1020", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, adux1020_id);
+
+static const struct of_device_id adux1020_of_match[] = {
+	{ .compatible = "adi,adux1020" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adux1020_of_match);
+
+static struct i2c_driver adux1020_driver = {
+	.driver = {
+		.name	= ADUX1020_DRV_NAME,
+		.of_match_table = adux1020_of_match,
+	},
+	.probe		= adux1020_probe,
+	.id_table	= adux1020_id,
+};
+module_i2c_driver(adux1020_driver);
+
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_DESCRIPTION("ADUX1020 photometric sensor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index a3a268ee2896..e68184a93a6d 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -14,7 +14,6 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/iio/iio.h>
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index c3b5c1f6614d..29c209cc1108 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -74,6 +74,12 @@ struct bmp280_calib {
 	s8  H6;
 };
 
+static const char *const bmp280_supply_names[] = {
+	"vddd", "vdda"
+};
+
+#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names)
+
 struct bmp280_data {
 	struct device *dev;
 	struct mutex lock;
@@ -85,8 +91,7 @@ struct bmp280_data {
 		struct bmp180_calib bmp180;
 		struct bmp280_calib bmp280;
 	} calib;
-	struct regulator *vddd;
-	struct regulator *vdda;
+	struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
 	unsigned int start_up_time; /* in microseconds */
 
 	/* log of base 2 of oversampling rate */
@@ -148,6 +153,8 @@ static int bmp280_read_calib(struct bmp280_data *data,
 {
 	int ret;
 	unsigned int tmp;
+	__le16 l16;
+	__be16 b16;
 	struct device *dev = data->dev;
 	__le16 t_buf[BMP280_COMP_TEMP_REG_COUNT / 2];
 	__le16 p_buf[BMP280_COMP_PRESS_REG_COUNT / 2];
@@ -207,12 +214,12 @@ static int bmp280_read_calib(struct bmp280_data *data,
 	}
 	calib->H1 = tmp;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, &tmp, 2);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, &l16, 2);
 	if (ret < 0) {
 		dev_err(dev, "failed to read H2 comp value\n");
 		return ret;
 	}
-	calib->H2 = sign_extend32(le16_to_cpu(tmp), 15);
+	calib->H2 = sign_extend32(le16_to_cpu(l16), 15);
 
 	ret = regmap_read(data->regmap, BMP280_REG_COMP_H3, &tmp);
 	if (ret < 0) {
@@ -221,20 +228,20 @@ static int bmp280_read_calib(struct bmp280_data *data,
 	}
 	calib->H3 = tmp;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, &tmp, 2);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, &b16, 2);
 	if (ret < 0) {
 		dev_err(dev, "failed to read H4 comp value\n");
 		return ret;
 	}
-	calib->H4 = sign_extend32(((be16_to_cpu(tmp) >> 4) & 0xff0) |
-				  (be16_to_cpu(tmp) & 0xf), 11);
+	calib->H4 = sign_extend32(((be16_to_cpu(b16) >> 4) & 0xff0) |
+				  (be16_to_cpu(b16) & 0xf), 11);
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, &tmp, 2);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, &l16, 2);
 	if (ret < 0) {
 		dev_err(dev, "failed to read H5 comp value\n");
 		return ret;
 	}
-	calib->H5 = sign_extend32(((le16_to_cpu(tmp) >> 4) & 0xfff), 11);
+	calib->H5 = sign_extend32(((le16_to_cpu(l16) >> 4) & 0xfff), 11);
 
 	ret = regmap_read(data->regmap, BMP280_REG_COMP_H6, &tmp);
 	if (ret < 0) {
@@ -979,6 +986,22 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
 	return 0;
 }
 
+static void bmp280_pm_disable(void *data)
+{
+	struct device *dev = data;
+
+	pm_runtime_get_sync(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+}
+
+static void bmp280_regulators_disable(void *data)
+{
+	struct regulator_bulk_data *supplies = data;
+
+	regulator_bulk_disable(BMP280_NUM_SUPPLIES, supplies);
+}
+
 int bmp280_common_probe(struct device *dev,
 			struct regmap *regmap,
 			unsigned int chip,
@@ -1033,27 +1056,28 @@ int bmp280_common_probe(struct device *dev,
 	}
 
 	/* Bring up regulators */
-	data->vddd = devm_regulator_get(dev, "vddd");
-	if (IS_ERR(data->vddd)) {
-		dev_err(dev, "failed to get VDDD regulator\n");
-		return PTR_ERR(data->vddd);
-	}
-	ret = regulator_enable(data->vddd);
+	regulator_bulk_set_supply_names(data->supplies,
+					bmp280_supply_names,
+					BMP280_NUM_SUPPLIES);
+
+	ret = devm_regulator_bulk_get(dev,
+				      BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDD regulator\n");
+		dev_err(dev, "failed to get regulators\n");
 		return ret;
 	}
-	data->vdda = devm_regulator_get(dev, "vdda");
-	if (IS_ERR(data->vdda)) {
-		dev_err(dev, "failed to get VDDA regulator\n");
-		ret = PTR_ERR(data->vdda);
-		goto out_disable_vddd;
-	}
-	ret = regulator_enable(data->vdda);
+
+	ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDA regulator\n");
-		goto out_disable_vddd;
+		dev_err(dev, "failed to enable regulators\n");
+		return ret;
 	}
+
+	ret = devm_add_action_or_reset(dev, bmp280_regulators_disable,
+				       data->supplies);
+	if (ret)
+		return ret;
+
 	/* Wait to make sure we started up properly */
 	usleep_range(data->start_up_time, data->start_up_time + 100);
 
@@ -1068,17 +1092,16 @@ int bmp280_common_probe(struct device *dev,
 	data->regmap = regmap;
 	ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
 	if (ret < 0)
-		goto out_disable_vdda;
+		return ret;
 	if (chip_id != chip) {
 		dev_err(dev, "bad chip id: expected %x got %x\n",
 			chip, chip_id);
-		ret = -EINVAL;
-		goto out_disable_vdda;
+		return -EINVAL;
 	}
 
 	ret = data->chip_info->chip_config(data);
 	if (ret < 0)
-		goto out_disable_vdda;
+		return ret;
 
 	dev_set_drvdata(dev, indio_dev);
 
@@ -1092,14 +1115,14 @@ int bmp280_common_probe(struct device *dev,
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_vdda;
+			return ret;
 		}
 	} else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
 		ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_vdda;
+			return ret;
 		}
 	}
 
@@ -1111,7 +1134,7 @@ int bmp280_common_probe(struct device *dev,
 	if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
 		ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
 		if (ret)
-			goto out_disable_vdda;
+			return ret;
 	}
 
 	/* Enable runtime PM */
@@ -1126,50 +1149,21 @@ int bmp280_common_probe(struct device *dev,
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_put(dev);
 
-	ret = iio_device_register(indio_dev);
+	ret = devm_add_action_or_reset(dev, bmp280_pm_disable, dev);
 	if (ret)
-		goto out_runtime_pm_disable;
-
-	return 0;
+		return ret;
 
-out_runtime_pm_disable:
-	pm_runtime_get_sync(data->dev);
-	pm_runtime_put_noidle(data->dev);
-	pm_runtime_disable(data->dev);
-out_disable_vdda:
-	regulator_disable(data->vdda);
-out_disable_vddd:
-	regulator_disable(data->vddd);
-	return ret;
+	return devm_iio_device_register(dev, indio_dev);
 }
 EXPORT_SYMBOL(bmp280_common_probe);
 
-int bmp280_common_remove(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct bmp280_data *data = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	pm_runtime_get_sync(data->dev);
-	pm_runtime_put_noidle(data->dev);
-	pm_runtime_disable(data->dev);
-	regulator_disable(data->vdda);
-	regulator_disable(data->vddd);
-	return 0;
-}
-EXPORT_SYMBOL(bmp280_common_remove);
-
 #ifdef CONFIG_PM
 static int bmp280_runtime_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct bmp280_data *data = iio_priv(indio_dev);
-	int ret;
 
-	ret = regulator_disable(data->vdda);
-	if (ret)
-		return ret;
-	return regulator_disable(data->vddd);
+	return regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
 }
 
 static int bmp280_runtime_resume(struct device *dev)
@@ -1178,10 +1172,7 @@ static int bmp280_runtime_resume(struct device *dev)
 	struct bmp280_data *data = iio_priv(indio_dev);
 	int ret;
 
-	ret = regulator_enable(data->vddd);
-	if (ret)
-		return ret;
-	ret = regulator_enable(data->vdda);
+	ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret)
 		return ret;
 	usleep_range(data->start_up_time, data->start_up_time + 100);
diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
index acd9a3784fb4..3109c8e2cc11 100644
--- a/drivers/iio/pressure/bmp280-i2c.c
+++ b/drivers/iio/pressure/bmp280-i2c.c
@@ -38,11 +38,6 @@ static int bmp280_i2c_probe(struct i2c_client *client,
 				   client->irq);
 }
 
-static int bmp280_i2c_remove(struct i2c_client *client)
-{
-	return bmp280_common_remove(&client->dev);
-}
-
 static const struct acpi_device_id bmp280_acpi_i2c_match[] = {
 	{"BMP0280", BMP280_CHIP_ID },
 	{"BMP0180", BMP180_CHIP_ID },
@@ -82,7 +77,6 @@ static struct i2c_driver bmp280_i2c_driver = {
 		.pm = &bmp280_dev_pm_ops,
 	},
 	.probe		= bmp280_i2c_probe,
-	.remove		= bmp280_i2c_remove,
 	.id_table	= bmp280_i2c_id,
 };
 module_i2c_driver(bmp280_i2c_driver);
diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c
index 9d57b7a3b134..625b86878ad8 100644
--- a/drivers/iio/pressure/bmp280-spi.c
+++ b/drivers/iio/pressure/bmp280-spi.c
@@ -86,11 +86,6 @@ static int bmp280_spi_probe(struct spi_device *spi)
 				   spi->irq);
 }
 
-static int bmp280_spi_remove(struct spi_device *spi)
-{
-	return bmp280_common_remove(&spi->dev);
-}
-
 static const struct of_device_id bmp280_of_spi_match[] = {
 	{ .compatible = "bosch,bmp085", },
 	{ .compatible = "bosch,bmp180", },
@@ -118,7 +113,6 @@ static struct spi_driver bmp280_spi_driver = {
 	},
 	.id_table = bmp280_spi_id,
 	.probe = bmp280_spi_probe,
-	.remove = bmp280_spi_remove,
 };
 module_spi_driver(bmp280_spi_driver);
 
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index eda50ef65706..57ba0e85db91 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -112,7 +112,6 @@ int bmp280_common_probe(struct device *dev,
 			unsigned int chip,
 			const char *name,
 			int irq);
-int bmp280_common_remove(struct device *dev);
 
 /* PM ops */
 extern const struct dev_pm_ops bmp280_dev_pm_ops;
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index ca6863b32a5f..bd972cec4830 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -14,7 +14,6 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/iio/iio.h>
diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c
index 9d0d07930236..99dfe33ee402 100644
--- a/drivers/iio/pressure/zpa2326.c
+++ b/drivers/iio/pressure/zpa2326.c
@@ -1243,6 +1243,11 @@ static int zpa2326_postenable_buffer(struct iio_dev *indio_dev)
 	const struct zpa2326_private *priv = iio_priv(indio_dev);
 	int                           err;
 
+	/* Plug our own trigger event handler. */
+	err = iio_triggered_buffer_postenable(indio_dev);
+	if (err)
+		goto err;
+
 	if (!priv->waken) {
 		/*
 		 * We were already power supplied. Just clear hardware FIFO to
@@ -1250,7 +1255,7 @@ static int zpa2326_postenable_buffer(struct iio_dev *indio_dev)
 		 */
 		err = zpa2326_clear_fifo(indio_dev, 0);
 		if (err)
-			goto err;
+			goto err_buffer_predisable;
 	}
 
 	if (!iio_trigger_using_own(indio_dev) && priv->waken) {
@@ -1260,16 +1265,13 @@ static int zpa2326_postenable_buffer(struct iio_dev *indio_dev)
 		 */
 		err = zpa2326_config_oneshot(indio_dev, priv->irq);
 		if (err)
-			goto err;
+			goto err_buffer_predisable;
 	}
 
-	/* Plug our own trigger event handler. */
-	err = iio_triggered_buffer_postenable(indio_dev);
-	if (err)
-		goto err;
-
 	return 0;
 
+err_buffer_predisable:
+	iio_triggered_buffer_predisable(indio_dev);
 err:
 	zpa2326_err(indio_dev, "failed to enable buffering (%d)", err);
 
diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
index 47af54f14756..5b369645ef49 100644
--- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -136,12 +136,13 @@ static inline int lidar_write_power(struct lidar_data *data, int val)
 
 static int lidar_read_measurement(struct lidar_data *data, u16 *reg)
 {
+	__be16 value;
 	int ret = data->xfer(data, LIDAR_REG_DATA_HBYTE |
 			(data->i2c_enabled ? LIDAR_REG_DATA_WORD_READ : 0),
-			(u8 *) reg, 2);
+			(u8 *) &value, 2);
 
 	if (!ret)
-		*reg = be16_to_cpu(*reg);
+		*reg = be16_to_cpu(value);
 
 	return ret;
 }
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index 737faa0901fe..e1ccb4003015 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -4,6 +4,17 @@
 #
 menu "Temperature sensors"
 
+config LTC2983
+	tristate "Analog Devices Multi-Sensor Digital Temperature Measurement System"
+	depends on SPI
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for the LTC2983 Multi-Sensor
+	  high accuracy digital temperature measurement system.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ltc2983.
+
 config MAXIM_THERMOCOUPLE
 	tristate "Maxim thermocouple sensors"
 	depends on SPI
diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
index baca4776ca0d..d6b850b0cf63 100644
--- a/drivers/iio/temperature/Makefile
+++ b/drivers/iio/temperature/Makefile
@@ -3,6 +3,7 @@
 # Makefile for industrial I/O temperature drivers
 #
 
+obj-$(CONFIG_LTC2983) += ltc2983.o
 obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o
 obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o
 obj-$(CONFIG_MAX31856) += max31856.o
diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
new file mode 100644
index 000000000000..ddf47023364b
--- /dev/null
+++ b/drivers/iio/temperature/ltc2983.c
@@ -0,0 +1,1557 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System
+ * driver
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+/* register map */
+#define LTC2983_STATUS_REG			0x0000
+#define LTC2983_TEMP_RES_START_REG		0x0010
+#define LTC2983_TEMP_RES_END_REG		0x005F
+#define LTC2983_GLOBAL_CONFIG_REG		0x00F0
+#define LTC2983_MULT_CHANNEL_START_REG		0x00F4
+#define LTC2983_MULT_CHANNEL_END_REG		0x00F7
+#define LTC2983_MUX_CONFIG_REG			0x00FF
+#define LTC2983_CHAN_ASSIGN_START_REG		0x0200
+#define LTC2983_CHAN_ASSIGN_END_REG		0x024F
+#define LTC2983_CUST_SENS_TBL_START_REG		0x0250
+#define LTC2983_CUST_SENS_TBL_END_REG		0x03CF
+
+#define LTC2983_DIFFERENTIAL_CHAN_MIN		2
+#define LTC2983_MAX_CHANNELS_NR			20
+#define LTC2983_MIN_CHANNELS_NR			1
+#define LTC2983_SLEEP				0x97
+#define LTC2983_CUSTOM_STEINHART_SIZE		24
+#define LTC2983_CUSTOM_SENSOR_ENTRY_SZ		6
+#define LTC2983_CUSTOM_STEINHART_ENTRY_SZ	4
+
+#define LTC2983_CHAN_START_ADDR(chan) \
+			(((chan - 1) * 4) + LTC2983_CHAN_ASSIGN_START_REG)
+#define LTC2983_CHAN_RES_ADDR(chan) \
+			(((chan - 1) * 4) + LTC2983_TEMP_RES_START_REG)
+#define LTC2983_THERMOCOUPLE_DIFF_MASK		BIT(3)
+#define LTC2983_THERMOCOUPLE_SGL(x) \
+				FIELD_PREP(LTC2983_THERMOCOUPLE_DIFF_MASK, x)
+#define LTC2983_THERMOCOUPLE_OC_CURR_MASK	GENMASK(1, 0)
+#define LTC2983_THERMOCOUPLE_OC_CURR(x) \
+				FIELD_PREP(LTC2983_THERMOCOUPLE_OC_CURR_MASK, x)
+#define LTC2983_THERMOCOUPLE_OC_CHECK_MASK	BIT(2)
+#define LTC2983_THERMOCOUPLE_OC_CHECK(x) \
+			FIELD_PREP(LTC2983_THERMOCOUPLE_OC_CHECK_MASK, x)
+
+#define LTC2983_THERMISTOR_DIFF_MASK		BIT(2)
+#define LTC2983_THERMISTOR_SGL(x) \
+				FIELD_PREP(LTC2983_THERMISTOR_DIFF_MASK, x)
+#define LTC2983_THERMISTOR_R_SHARE_MASK		BIT(1)
+#define LTC2983_THERMISTOR_R_SHARE(x) \
+				FIELD_PREP(LTC2983_THERMISTOR_R_SHARE_MASK, x)
+#define LTC2983_THERMISTOR_C_ROTATE_MASK	BIT(0)
+#define LTC2983_THERMISTOR_C_ROTATE(x) \
+				FIELD_PREP(LTC2983_THERMISTOR_C_ROTATE_MASK, x)
+
+#define LTC2983_DIODE_DIFF_MASK			BIT(2)
+#define LTC2983_DIODE_SGL(x) \
+			FIELD_PREP(LTC2983_DIODE_DIFF_MASK, x)
+#define LTC2983_DIODE_3_CONV_CYCLE_MASK		BIT(1)
+#define LTC2983_DIODE_3_CONV_CYCLE(x) \
+				FIELD_PREP(LTC2983_DIODE_3_CONV_CYCLE_MASK, x)
+#define LTC2983_DIODE_AVERAGE_ON_MASK		BIT(0)
+#define LTC2983_DIODE_AVERAGE_ON(x) \
+				FIELD_PREP(LTC2983_DIODE_AVERAGE_ON_MASK, x)
+
+#define LTC2983_RTD_4_WIRE_MASK			BIT(3)
+#define LTC2983_RTD_ROTATION_MASK		BIT(1)
+#define LTC2983_RTD_C_ROTATE(x) \
+			FIELD_PREP(LTC2983_RTD_ROTATION_MASK, x)
+#define LTC2983_RTD_KELVIN_R_SENSE_MASK		GENMASK(3, 2)
+#define LTC2983_RTD_N_WIRES_MASK		GENMASK(3, 2)
+#define LTC2983_RTD_N_WIRES(x) \
+			FIELD_PREP(LTC2983_RTD_N_WIRES_MASK, x)
+#define LTC2983_RTD_R_SHARE_MASK		BIT(0)
+#define LTC2983_RTD_R_SHARE(x) \
+			FIELD_PREP(LTC2983_RTD_R_SHARE_MASK, 1)
+
+#define LTC2983_COMMON_HARD_FAULT_MASK	GENMASK(31, 30)
+#define LTC2983_COMMON_SOFT_FAULT_MASK	GENMASK(27, 25)
+
+#define	LTC2983_STATUS_START_MASK	BIT(7)
+#define	LTC2983_STATUS_START(x)		FIELD_PREP(LTC2983_STATUS_START_MASK, x)
+
+#define	LTC2983_STATUS_CHAN_SEL_MASK	GENMASK(4, 0)
+#define	LTC2983_STATUS_CHAN_SEL(x) \
+				FIELD_PREP(LTC2983_STATUS_CHAN_SEL_MASK, x)
+
+#define LTC2983_TEMP_UNITS_MASK		BIT(2)
+#define LTC2983_TEMP_UNITS(x)		FIELD_PREP(LTC2983_TEMP_UNITS_MASK, x)
+
+#define LTC2983_NOTCH_FREQ_MASK		GENMASK(1, 0)
+#define LTC2983_NOTCH_FREQ(x)		FIELD_PREP(LTC2983_NOTCH_FREQ_MASK, x)
+
+#define LTC2983_RES_VALID_MASK		BIT(24)
+#define LTC2983_DATA_MASK		GENMASK(23, 0)
+#define LTC2983_DATA_SIGN_BIT		23
+
+#define LTC2983_CHAN_TYPE_MASK		GENMASK(31, 27)
+#define LTC2983_CHAN_TYPE(x)		FIELD_PREP(LTC2983_CHAN_TYPE_MASK, x)
+
+/* cold junction for thermocouples and rsense for rtd's and thermistor's */
+#define LTC2983_CHAN_ASSIGN_MASK	GENMASK(26, 22)
+#define LTC2983_CHAN_ASSIGN(x)		FIELD_PREP(LTC2983_CHAN_ASSIGN_MASK, x)
+
+#define LTC2983_CUSTOM_LEN_MASK		GENMASK(5, 0)
+#define LTC2983_CUSTOM_LEN(x)		FIELD_PREP(LTC2983_CUSTOM_LEN_MASK, x)
+
+#define LTC2983_CUSTOM_ADDR_MASK	GENMASK(11, 6)
+#define LTC2983_CUSTOM_ADDR(x)		FIELD_PREP(LTC2983_CUSTOM_ADDR_MASK, x)
+
+#define LTC2983_THERMOCOUPLE_CFG_MASK	GENMASK(21, 18)
+#define LTC2983_THERMOCOUPLE_CFG(x) \
+				FIELD_PREP(LTC2983_THERMOCOUPLE_CFG_MASK, x)
+#define LTC2983_THERMOCOUPLE_HARD_FAULT_MASK	GENMASK(31, 29)
+#define LTC2983_THERMOCOUPLE_SOFT_FAULT_MASK	GENMASK(28, 25)
+
+#define LTC2983_RTD_CFG_MASK		GENMASK(21, 18)
+#define LTC2983_RTD_CFG(x)		FIELD_PREP(LTC2983_RTD_CFG_MASK, x)
+#define LTC2983_RTD_EXC_CURRENT_MASK	GENMASK(17, 14)
+#define LTC2983_RTD_EXC_CURRENT(x) \
+				FIELD_PREP(LTC2983_RTD_EXC_CURRENT_MASK, x)
+#define LTC2983_RTD_CURVE_MASK		GENMASK(13, 12)
+#define LTC2983_RTD_CURVE(x)		FIELD_PREP(LTC2983_RTD_CURVE_MASK, x)
+
+#define LTC2983_THERMISTOR_CFG_MASK	GENMASK(21, 19)
+#define LTC2983_THERMISTOR_CFG(x) \
+				FIELD_PREP(LTC2983_THERMISTOR_CFG_MASK, x)
+#define LTC2983_THERMISTOR_EXC_CURRENT_MASK	GENMASK(18, 15)
+#define LTC2983_THERMISTOR_EXC_CURRENT(x) \
+			FIELD_PREP(LTC2983_THERMISTOR_EXC_CURRENT_MASK, x)
+
+#define LTC2983_DIODE_CFG_MASK		GENMASK(26, 24)
+#define LTC2983_DIODE_CFG(x)		FIELD_PREP(LTC2983_DIODE_CFG_MASK, x)
+#define LTC2983_DIODE_EXC_CURRENT_MASK	GENMASK(23, 22)
+#define LTC2983_DIODE_EXC_CURRENT(x) \
+				FIELD_PREP(LTC2983_DIODE_EXC_CURRENT_MASK, x)
+#define LTC2983_DIODE_IDEAL_FACTOR_MASK	GENMASK(21, 0)
+#define LTC2983_DIODE_IDEAL_FACTOR(x) \
+				FIELD_PREP(LTC2983_DIODE_IDEAL_FACTOR_MASK, x)
+
+#define LTC2983_R_SENSE_VAL_MASK	GENMASK(26, 0)
+#define LTC2983_R_SENSE_VAL(x)		FIELD_PREP(LTC2983_R_SENSE_VAL_MASK, x)
+
+#define LTC2983_ADC_SINGLE_ENDED_MASK	BIT(26)
+#define LTC2983_ADC_SINGLE_ENDED(x) \
+				FIELD_PREP(LTC2983_ADC_SINGLE_ENDED_MASK, x)
+
+enum {
+	LTC2983_SENSOR_THERMOCOUPLE = 1,
+	LTC2983_SENSOR_THERMOCOUPLE_CUSTOM = 9,
+	LTC2983_SENSOR_RTD = 10,
+	LTC2983_SENSOR_RTD_CUSTOM = 18,
+	LTC2983_SENSOR_THERMISTOR = 19,
+	LTC2983_SENSOR_THERMISTOR_STEINHART = 26,
+	LTC2983_SENSOR_THERMISTOR_CUSTOM = 27,
+	LTC2983_SENSOR_DIODE = 28,
+	LTC2983_SENSOR_SENSE_RESISTOR = 29,
+	LTC2983_SENSOR_DIRECT_ADC = 30,
+};
+
+#define to_thermocouple(_sensor) \
+		container_of(_sensor, struct ltc2983_thermocouple, sensor)
+
+#define to_rtd(_sensor) \
+		container_of(_sensor, struct ltc2983_rtd, sensor)
+
+#define to_thermistor(_sensor) \
+		container_of(_sensor, struct ltc2983_thermistor, sensor)
+
+#define to_diode(_sensor) \
+		container_of(_sensor, struct ltc2983_diode, sensor)
+
+#define to_rsense(_sensor) \
+		container_of(_sensor, struct ltc2983_rsense, sensor)
+
+#define to_adc(_sensor) \
+		container_of(_sensor, struct ltc2983_adc, sensor)
+
+struct ltc2983_data {
+	struct regmap *regmap;
+	struct spi_device *spi;
+	struct mutex lock;
+	struct completion completion;
+	struct iio_chan_spec *iio_chan;
+	struct ltc2983_sensor **sensors;
+	u32 mux_delay_config;
+	u32 filter_notch_freq;
+	u16 custom_table_size;
+	u8 num_channels;
+	u8 iio_channels;
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 * Holds the converted temperature
+	 */
+	__be32 temp ____cacheline_aligned;
+};
+
+struct ltc2983_sensor {
+	int (*fault_handler)(const struct ltc2983_data *st, const u32 result);
+	int (*assign_chan)(struct ltc2983_data *st,
+			   const struct ltc2983_sensor *sensor);
+	/* specifies the sensor channel */
+	u32 chan;
+	/* sensor type */
+	u32 type;
+};
+
+struct ltc2983_custom_sensor {
+	/* raw table sensor data */
+	u8 *table;
+	size_t size;
+	/* address offset */
+	s8 offset;
+	bool is_steinhart;
+};
+
+struct ltc2983_thermocouple {
+	struct ltc2983_sensor sensor;
+	struct ltc2983_custom_sensor *custom;
+	u32 sensor_config;
+	u32 cold_junction_chan;
+};
+
+struct ltc2983_rtd {
+	struct ltc2983_sensor sensor;
+	struct ltc2983_custom_sensor *custom;
+	u32 sensor_config;
+	u32 r_sense_chan;
+	u32 excitation_current;
+	u32 rtd_curve;
+};
+
+struct ltc2983_thermistor {
+	struct ltc2983_sensor sensor;
+	struct ltc2983_custom_sensor *custom;
+	u32 sensor_config;
+	u32 r_sense_chan;
+	u32 excitation_current;
+};
+
+struct ltc2983_diode {
+	struct ltc2983_sensor sensor;
+	u32 sensor_config;
+	u32 excitation_current;
+	u32 ideal_factor_value;
+};
+
+struct ltc2983_rsense {
+	struct ltc2983_sensor sensor;
+	u32 r_sense_val;
+};
+
+struct ltc2983_adc {
+	struct ltc2983_sensor sensor;
+	bool single_ended;
+};
+
+/*
+ * Convert to Q format numbers. These number's are integers where
+ * the number of integer and fractional bits are specified. The resolution
+ * is given by 1/@resolution and tell us the number of fractional bits. For
+ * instance a resolution of 2^-10 means we have 10 fractional bits.
+ */
+static u32 __convert_to_raw(const u64 val, const u32 resolution)
+{
+	u64 __res = val * resolution;
+
+	/* all values are multiplied by 1000000 to remove the fraction */
+	do_div(__res, 1000000);
+
+	return __res;
+}
+
+static u32 __convert_to_raw_sign(const u64 val, const u32 resolution)
+{
+	s64 __res = -(s32)val;
+
+	__res = __convert_to_raw(__res, resolution);
+
+	return (u32)-__res;
+}
+
+static int __ltc2983_fault_handler(const struct ltc2983_data *st,
+				   const u32 result, const u32 hard_mask,
+				   const u32 soft_mask)
+{
+	const struct device *dev = &st->spi->dev;
+
+	if (result & hard_mask) {
+		dev_err(dev, "Invalid conversion: Sensor HARD fault\n");
+		return -EIO;
+	} else if (result & soft_mask) {
+		/* just print a warning */
+		dev_warn(dev, "Suspicious conversion: Sensor SOFT fault\n");
+	}
+
+	return 0;
+}
+
+static int __ltc2983_chan_assign_common(const struct ltc2983_data *st,
+					const struct ltc2983_sensor *sensor,
+					u32 chan_val)
+{
+	u32 reg = LTC2983_CHAN_START_ADDR(sensor->chan);
+	__be32 __chan_val;
+
+	chan_val |= LTC2983_CHAN_TYPE(sensor->type);
+	dev_dbg(&st->spi->dev, "Assign reg:0x%04X, val:0x%08X\n", reg,
+		chan_val);
+	__chan_val = cpu_to_be32(chan_val);
+	return regmap_bulk_write(st->regmap, reg, &__chan_val,
+				 sizeof(__chan_val));
+}
+
+static int __ltc2983_chan_custom_sensor_assign(struct ltc2983_data *st,
+					  struct ltc2983_custom_sensor *custom,
+					  u32 *chan_val)
+{
+	u32 reg;
+	u8 mult = custom->is_steinhart ? LTC2983_CUSTOM_STEINHART_ENTRY_SZ :
+		LTC2983_CUSTOM_SENSOR_ENTRY_SZ;
+	const struct device *dev = &st->spi->dev;
+	/*
+	 * custom->size holds the raw size of the table. However, when
+	 * configuring the sensor channel, we must write the number of
+	 * entries of the table minus 1. For steinhart sensors 0 is written
+	 * since the size is constant!
+	 */
+	const u8 len = custom->is_steinhart ? 0 :
+		(custom->size / LTC2983_CUSTOM_SENSOR_ENTRY_SZ) - 1;
+	/*
+	 * Check if the offset was assigned already. It should be for steinhart
+	 * sensors. When coming from sleep, it should be assigned for all.
+	 */
+	if (custom->offset < 0) {
+		/*
+		 * This needs to be done again here because, from the moment
+		 * when this test was done (successfully) for this custom
+		 * sensor, a steinhart sensor might have been added changing
+		 * custom_table_size...
+		 */
+		if (st->custom_table_size + custom->size >
+		    (LTC2983_CUST_SENS_TBL_END_REG -
+		     LTC2983_CUST_SENS_TBL_START_REG) + 1) {
+			dev_err(dev,
+				"Not space left(%d) for new custom sensor(%zu)",
+				st->custom_table_size,
+				custom->size);
+			return -EINVAL;
+		}
+
+		custom->offset = st->custom_table_size /
+					LTC2983_CUSTOM_SENSOR_ENTRY_SZ;
+		st->custom_table_size += custom->size;
+	}
+
+	reg = (custom->offset * mult) + LTC2983_CUST_SENS_TBL_START_REG;
+
+	*chan_val |= LTC2983_CUSTOM_LEN(len);
+	*chan_val |= LTC2983_CUSTOM_ADDR(custom->offset);
+	dev_dbg(dev, "Assign custom sensor, reg:0x%04X, off:%d, sz:%zu",
+		reg, custom->offset,
+		custom->size);
+	/* write custom sensor table */
+	return regmap_bulk_write(st->regmap, reg, custom->table, custom->size);
+}
+
+static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
+						struct ltc2983_data *st,
+						const struct device_node *np,
+						const char *propname,
+						const bool is_steinhart,
+						const u32 resolution,
+						const bool has_signed)
+{
+	struct ltc2983_custom_sensor *new_custom;
+	u8 index, n_entries, tbl = 0;
+	struct device *dev = &st->spi->dev;
+	/*
+	 * For custom steinhart, the full u32 is taken. For all the others
+	 * the MSB is discarded.
+	 */
+	const u8 n_size = (is_steinhart == true) ? 4 : 3;
+	const u8 e_size = (is_steinhart == true) ? sizeof(u32) : sizeof(u64);
+
+	n_entries = of_property_count_elems_of_size(np, propname, e_size);
+	/* n_entries must be an even number */
+	if (!n_entries || (n_entries % 2) != 0) {
+		dev_err(dev, "Number of entries either 0 or not even\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	new_custom = devm_kzalloc(dev, sizeof(*new_custom), GFP_KERNEL);
+	if (!new_custom)
+		return ERR_PTR(-ENOMEM);
+
+	new_custom->size = n_entries * n_size;
+	/* check Steinhart size */
+	if (is_steinhart && new_custom->size != LTC2983_CUSTOM_STEINHART_SIZE) {
+		dev_err(dev, "Steinhart sensors size(%zu) must be 24",
+							new_custom->size);
+		return ERR_PTR(-EINVAL);
+	}
+	/* Check space on the table. */
+	if (st->custom_table_size + new_custom->size >
+	    (LTC2983_CUST_SENS_TBL_END_REG -
+	     LTC2983_CUST_SENS_TBL_START_REG) + 1) {
+		dev_err(dev, "No space left(%d) for new custom sensor(%zu)",
+				st->custom_table_size, new_custom->size);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* allocate the table */
+	new_custom->table = devm_kzalloc(dev, new_custom->size, GFP_KERNEL);
+	if (!new_custom->table)
+		return ERR_PTR(-ENOMEM);
+
+	for (index = 0; index < n_entries; index++) {
+		u64 temp = 0, j;
+		/*
+		 * Steinhart sensors are configured with raw values in the
+		 * devicetree. For the other sensors we must convert the
+		 * value to raw. The odd index's correspond to temperarures
+		 * and always have 1/1024 of resolution. Temperatures also
+		 * come in kelvin, so signed values is not possible
+		 */
+		if (!is_steinhart) {
+			of_property_read_u64_index(np, propname, index, &temp);
+
+			if ((index % 2) != 0)
+				temp = __convert_to_raw(temp, 1024);
+			else if (has_signed && (s64)temp < 0)
+				temp = __convert_to_raw_sign(temp, resolution);
+			else
+				temp = __convert_to_raw(temp, resolution);
+		} else {
+			of_property_read_u32_index(np, propname, index,
+						   (u32 *)&temp);
+		}
+
+		for (j = 0; j < n_size; j++)
+			new_custom->table[tbl++] =
+				temp >> (8 * (n_size - j - 1));
+	}
+
+	new_custom->is_steinhart = is_steinhart;
+	/*
+	 * This is done to first add all the steinhart sensors to the table,
+	 * in order to maximize the table usage. If we mix adding steinhart
+	 * with the other sensors, we might have to do some roundup to make
+	 * sure that sensor_addr - 0x250(start address) is a multiple of 4
+	 * (for steinhart), and a multiple of 6 for all the other sensors.
+	 * Since we have const 24 bytes for steinhart sensors and 24 is
+	 * also a multiple of 6, we guarantee that the first non-steinhart
+	 * sensor will sit in a correct address without the need of filling
+	 * addresses.
+	 */
+	if (is_steinhart) {
+		new_custom->offset = st->custom_table_size /
+					LTC2983_CUSTOM_STEINHART_ENTRY_SZ;
+		st->custom_table_size += new_custom->size;
+	} else {
+		/* mark as unset. This is checked later on the assign phase */
+		new_custom->offset = -1;
+	}
+
+	return new_custom;
+}
+
+static int ltc2983_thermocouple_fault_handler(const struct ltc2983_data *st,
+					      const u32 result)
+{
+	return __ltc2983_fault_handler(st, result,
+				       LTC2983_THERMOCOUPLE_HARD_FAULT_MASK,
+				       LTC2983_THERMOCOUPLE_SOFT_FAULT_MASK);
+}
+
+static int ltc2983_common_fault_handler(const struct ltc2983_data *st,
+					const u32 result)
+{
+	return __ltc2983_fault_handler(st, result,
+				       LTC2983_COMMON_HARD_FAULT_MASK,
+				       LTC2983_COMMON_SOFT_FAULT_MASK);
+}
+
+static int ltc2983_thermocouple_assign_chan(struct ltc2983_data *st,
+				const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_thermocouple *thermo = to_thermocouple(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_CHAN_ASSIGN(thermo->cold_junction_chan);
+	chan_val |= LTC2983_THERMOCOUPLE_CFG(thermo->sensor_config);
+
+	if (thermo->custom) {
+		int ret;
+
+		ret = __ltc2983_chan_custom_sensor_assign(st, thermo->custom,
+							  &chan_val);
+		if (ret)
+			return ret;
+	}
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static int ltc2983_rtd_assign_chan(struct ltc2983_data *st,
+				   const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_rtd *rtd = to_rtd(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_CHAN_ASSIGN(rtd->r_sense_chan);
+	chan_val |= LTC2983_RTD_CFG(rtd->sensor_config);
+	chan_val |= LTC2983_RTD_EXC_CURRENT(rtd->excitation_current);
+	chan_val |= LTC2983_RTD_CURVE(rtd->rtd_curve);
+
+	if (rtd->custom) {
+		int ret;
+
+		ret = __ltc2983_chan_custom_sensor_assign(st, rtd->custom,
+							  &chan_val);
+		if (ret)
+			return ret;
+	}
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static int ltc2983_thermistor_assign_chan(struct ltc2983_data *st,
+					  const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_thermistor *thermistor = to_thermistor(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_CHAN_ASSIGN(thermistor->r_sense_chan);
+	chan_val |= LTC2983_THERMISTOR_CFG(thermistor->sensor_config);
+	chan_val |=
+		LTC2983_THERMISTOR_EXC_CURRENT(thermistor->excitation_current);
+
+	if (thermistor->custom) {
+		int ret;
+
+		ret = __ltc2983_chan_custom_sensor_assign(st,
+							  thermistor->custom,
+							  &chan_val);
+		if (ret)
+			return ret;
+	}
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static int ltc2983_diode_assign_chan(struct ltc2983_data *st,
+				     const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_diode *diode = to_diode(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_DIODE_CFG(diode->sensor_config);
+	chan_val |= LTC2983_DIODE_EXC_CURRENT(diode->excitation_current);
+	chan_val |= LTC2983_DIODE_IDEAL_FACTOR(diode->ideal_factor_value);
+
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static int ltc2983_r_sense_assign_chan(struct ltc2983_data *st,
+				       const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_rsense *rsense = to_rsense(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_R_SENSE_VAL(rsense->r_sense_val);
+
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static int ltc2983_adc_assign_chan(struct ltc2983_data *st,
+				   const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_adc *adc = to_adc(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_ADC_SINGLE_ENDED(adc->single_ended);
+
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static struct ltc2983_sensor *ltc2983_thermocouple_new(
+					const struct device_node *child,
+					struct ltc2983_data *st,
+					const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_thermocouple *thermo;
+	struct device_node *phandle;
+	u32 oc_current;
+	int ret;
+
+	thermo = devm_kzalloc(&st->spi->dev, sizeof(*thermo), GFP_KERNEL);
+	if (!thermo)
+		return ERR_PTR(-ENOMEM);
+
+	if (of_property_read_bool(child, "adi,single-ended"))
+		thermo->sensor_config = LTC2983_THERMOCOUPLE_SGL(1);
+
+	ret = of_property_read_u32(child, "adi,sensor-oc-current-microamp",
+				   &oc_current);
+	if (!ret) {
+		switch (oc_current) {
+		case 10:
+			thermo->sensor_config |=
+					LTC2983_THERMOCOUPLE_OC_CURR(0);
+			break;
+		case 100:
+			thermo->sensor_config |=
+					LTC2983_THERMOCOUPLE_OC_CURR(1);
+			break;
+		case 500:
+			thermo->sensor_config |=
+					LTC2983_THERMOCOUPLE_OC_CURR(2);
+			break;
+		case 1000:
+			thermo->sensor_config |=
+					LTC2983_THERMOCOUPLE_OC_CURR(3);
+			break;
+		default:
+			dev_err(&st->spi->dev,
+				"Invalid open circuit current:%u", oc_current);
+			return ERR_PTR(-EINVAL);
+		}
+
+		thermo->sensor_config |= LTC2983_THERMOCOUPLE_OC_CHECK(1);
+	}
+	/* validate channel index */
+	if (!(thermo->sensor_config & LTC2983_THERMOCOUPLE_DIFF_MASK) &&
+	    sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+		dev_err(&st->spi->dev,
+			"Invalid chann:%d for differential thermocouple",
+			sensor->chan);
+		return ERR_PTR(-EINVAL);
+	}
+
+	phandle = of_parse_phandle(child, "adi,cold-junction-handle", 0);
+	if (phandle) {
+		int ret;
+
+		ret = of_property_read_u32(phandle, "reg",
+					   &thermo->cold_junction_chan);
+		if (ret) {
+			/*
+			 * This would be catched later but we can just return
+			 * the error right away.
+			 */
+			dev_err(&st->spi->dev, "Property reg must be given\n");
+			of_node_put(phandle);
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
+	/* check custom sensor */
+	if (sensor->type == LTC2983_SENSOR_THERMOCOUPLE_CUSTOM) {
+		const char *propname = "adi,custom-thermocouple";
+
+		thermo->custom = __ltc2983_custom_sensor_new(st, child,
+							     propname, false,
+							     16384, true);
+		if (IS_ERR(thermo->custom)) {
+			of_node_put(phandle);
+			return ERR_CAST(thermo->custom);
+		}
+	}
+
+	/* set common parameters */
+	thermo->sensor.fault_handler = ltc2983_thermocouple_fault_handler;
+	thermo->sensor.assign_chan = ltc2983_thermocouple_assign_chan;
+
+	of_node_put(phandle);
+	return &thermo->sensor;
+}
+
+static struct ltc2983_sensor *ltc2983_rtd_new(const struct device_node *child,
+					  struct ltc2983_data *st,
+					  const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_rtd *rtd;
+	int ret = 0;
+	struct device *dev = &st->spi->dev;
+	struct device_node *phandle;
+	u32 excitation_current = 0, n_wires = 0;
+
+	rtd = devm_kzalloc(dev, sizeof(*rtd), GFP_KERNEL);
+	if (!rtd)
+		return ERR_PTR(-ENOMEM);
+
+	phandle = of_parse_phandle(child, "adi,rsense-handle", 0);
+	if (!phandle) {
+		dev_err(dev, "Property adi,rsense-handle missing or invalid");
+		return ERR_PTR(-EINVAL);
+	}
+
+	ret = of_property_read_u32(phandle, "reg", &rtd->r_sense_chan);
+	if (ret) {
+		dev_err(dev, "Property reg must be given\n");
+		goto fail;
+	}
+
+	ret = of_property_read_u32(child, "adi,number-of-wires", &n_wires);
+	if (!ret) {
+		switch (n_wires) {
+		case 2:
+			rtd->sensor_config = LTC2983_RTD_N_WIRES(0);
+			break;
+		case 3:
+			rtd->sensor_config = LTC2983_RTD_N_WIRES(1);
+			break;
+		case 4:
+			rtd->sensor_config = LTC2983_RTD_N_WIRES(2);
+			break;
+		case 5:
+			/* 4 wires, Kelvin Rsense */
+			rtd->sensor_config = LTC2983_RTD_N_WIRES(3);
+			break;
+		default:
+			dev_err(dev, "Invalid number of wires:%u\n", n_wires);
+			ret = -EINVAL;
+			goto fail;
+		}
+	}
+
+	if (of_property_read_bool(child, "adi,rsense-share")) {
+		/* Current rotation is only available with rsense sharing */
+		if (of_property_read_bool(child, "adi,current-rotate")) {
+			if (n_wires == 2 || n_wires == 3) {
+				dev_err(dev,
+					"Rotation not allowed for 2/3 Wire RTDs");
+				ret = -EINVAL;
+				goto fail;
+			}
+			rtd->sensor_config |= LTC2983_RTD_C_ROTATE(1);
+		} else {
+			rtd->sensor_config |= LTC2983_RTD_R_SHARE(1);
+		}
+	}
+	/*
+	 * rtd channel indexes are a bit more complicated to validate.
+	 * For 4wire RTD with rotation, the channel selection cannot be
+	 * >=19 since the chann + 1 is used in this configuration.
+	 * For 4wire RTDs with kelvin rsense, the rsense channel cannot be
+	 * <=1 since chanel - 1 and channel - 2 are used.
+	 */
+	if (rtd->sensor_config & LTC2983_RTD_4_WIRE_MASK) {
+		/* 4-wire */
+		u8 min = LTC2983_DIFFERENTIAL_CHAN_MIN,
+			max = LTC2983_MAX_CHANNELS_NR;
+
+		if (rtd->sensor_config & LTC2983_RTD_ROTATION_MASK)
+			max = LTC2983_MAX_CHANNELS_NR - 1;
+
+		if (((rtd->sensor_config & LTC2983_RTD_KELVIN_R_SENSE_MASK)
+		     == LTC2983_RTD_KELVIN_R_SENSE_MASK) &&
+		    (rtd->r_sense_chan <=  min)) {
+			/* kelvin rsense*/
+			dev_err(dev,
+				"Invalid rsense chann:%d to use in kelvin rsense",
+				rtd->r_sense_chan);
+
+			ret = -EINVAL;
+			goto fail;
+		}
+
+		if (sensor->chan < min || sensor->chan > max) {
+			dev_err(dev, "Invalid chann:%d for the rtd config",
+				sensor->chan);
+
+			ret = -EINVAL;
+			goto fail;
+		}
+	} else {
+		/* same as differential case */
+		if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+			dev_err(&st->spi->dev,
+				"Invalid chann:%d for RTD", sensor->chan);
+
+			ret = -EINVAL;
+			goto fail;
+		}
+	}
+
+	/* check custom sensor */
+	if (sensor->type == LTC2983_SENSOR_RTD_CUSTOM) {
+		rtd->custom = __ltc2983_custom_sensor_new(st, child,
+							  "adi,custom-rtd",
+							  false, 2048, false);
+		if (IS_ERR(rtd->custom)) {
+			of_node_put(phandle);
+			return ERR_CAST(rtd->custom);
+		}
+	}
+
+	/* set common parameters */
+	rtd->sensor.fault_handler = ltc2983_common_fault_handler;
+	rtd->sensor.assign_chan = ltc2983_rtd_assign_chan;
+
+	ret = of_property_read_u32(child, "adi,excitation-current-microamp",
+				   &excitation_current);
+	if (ret) {
+		/* default to 5uA */
+		rtd->excitation_current = 1;
+	} else {
+		switch (excitation_current) {
+		case 5:
+			rtd->excitation_current = 0x01;
+			break;
+		case 10:
+			rtd->excitation_current = 0x02;
+			break;
+		case 25:
+			rtd->excitation_current = 0x03;
+			break;
+		case 50:
+			rtd->excitation_current = 0x04;
+			break;
+		case 100:
+			rtd->excitation_current = 0x05;
+			break;
+		case 250:
+			rtd->excitation_current = 0x06;
+			break;
+		case 500:
+			rtd->excitation_current = 0x07;
+			break;
+		case 1000:
+			rtd->excitation_current = 0x08;
+			break;
+		default:
+			dev_err(&st->spi->dev,
+				"Invalid value for excitation current(%u)",
+				excitation_current);
+			ret = -EINVAL;
+			goto fail;
+		}
+	}
+
+	of_property_read_u32(child, "adi,rtd-curve", &rtd->rtd_curve);
+
+	of_node_put(phandle);
+	return &rtd->sensor;
+fail:
+	of_node_put(phandle);
+	return ERR_PTR(ret);
+}
+
+static struct ltc2983_sensor *ltc2983_thermistor_new(
+					const struct device_node *child,
+					struct ltc2983_data *st,
+					const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_thermistor *thermistor;
+	struct device *dev = &st->spi->dev;
+	struct device_node *phandle;
+	u32 excitation_current = 0;
+	int ret = 0;
+
+	thermistor = devm_kzalloc(dev, sizeof(*thermistor), GFP_KERNEL);
+	if (!thermistor)
+		return ERR_PTR(-ENOMEM);
+
+	phandle = of_parse_phandle(child, "adi,rsense-handle", 0);
+	if (!phandle) {
+		dev_err(dev, "Property adi,rsense-handle missing or invalid");
+		return ERR_PTR(-EINVAL);
+	}
+
+	ret = of_property_read_u32(phandle, "reg", &thermistor->r_sense_chan);
+	if (ret) {
+		dev_err(dev, "rsense channel must be configured...\n");
+		goto fail;
+	}
+
+	if (of_property_read_bool(child, "adi,single-ended")) {
+		thermistor->sensor_config = LTC2983_THERMISTOR_SGL(1);
+	} else if (of_property_read_bool(child, "adi,rsense-share")) {
+		/* rotation is only possible if sharing rsense */
+		if (of_property_read_bool(child, "adi,current-rotate"))
+			thermistor->sensor_config =
+						LTC2983_THERMISTOR_C_ROTATE(1);
+		else
+			thermistor->sensor_config =
+						LTC2983_THERMISTOR_R_SHARE(1);
+	}
+	/* validate channel index */
+	if (!(thermistor->sensor_config & LTC2983_THERMISTOR_DIFF_MASK) &&
+	    sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+		dev_err(&st->spi->dev,
+			"Invalid chann:%d for differential thermistor",
+			sensor->chan);
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	/* check custom sensor */
+	if (sensor->type >= LTC2983_SENSOR_THERMISTOR_STEINHART) {
+		bool steinhart = false;
+		const char *propname;
+
+		if (sensor->type == LTC2983_SENSOR_THERMISTOR_STEINHART) {
+			steinhart = true;
+			propname = "adi,custom-steinhart";
+		} else {
+			propname = "adi,custom-thermistor";
+		}
+
+		thermistor->custom = __ltc2983_custom_sensor_new(st, child,
+								 propname,
+								 steinhart,
+								 64, false);
+		if (IS_ERR(thermistor->custom)) {
+			of_node_put(phandle);
+			return ERR_CAST(thermistor->custom);
+		}
+	}
+	/* set common parameters */
+	thermistor->sensor.fault_handler = ltc2983_common_fault_handler;
+	thermistor->sensor.assign_chan = ltc2983_thermistor_assign_chan;
+
+	ret = of_property_read_u32(child, "adi,excitation-current-nanoamp",
+				   &excitation_current);
+	if (ret) {
+		/* Auto range is not allowed for custom sensors */
+		if (sensor->type >= LTC2983_SENSOR_THERMISTOR_STEINHART)
+			/* default to 1uA */
+			thermistor->excitation_current = 0x03;
+		else
+			/* default to auto-range */
+			thermistor->excitation_current = 0x0c;
+	} else {
+		switch (excitation_current) {
+		case 0:
+			/* auto range */
+			if (sensor->type >=
+			    LTC2983_SENSOR_THERMISTOR_STEINHART) {
+				dev_err(&st->spi->dev,
+					"Auto Range not allowed for custom sensors\n");
+				ret = -EINVAL;
+				goto fail;
+			}
+			thermistor->excitation_current = 0x0c;
+			break;
+		case 250:
+			thermistor->excitation_current = 0x01;
+			break;
+		case 500:
+			thermistor->excitation_current = 0x02;
+			break;
+		case 1000:
+			thermistor->excitation_current = 0x03;
+			break;
+		case 5000:
+			thermistor->excitation_current = 0x04;
+			break;
+		case 10000:
+			thermistor->excitation_current = 0x05;
+			break;
+		case 25000:
+			thermistor->excitation_current = 0x06;
+			break;
+		case 50000:
+			thermistor->excitation_current = 0x07;
+			break;
+		case 100000:
+			thermistor->excitation_current = 0x08;
+			break;
+		case 250000:
+			thermistor->excitation_current = 0x09;
+			break;
+		case 500000:
+			thermistor->excitation_current = 0x0a;
+			break;
+		case 1000000:
+			thermistor->excitation_current = 0x0b;
+			break;
+		default:
+			dev_err(&st->spi->dev,
+				"Invalid value for excitation current(%u)",
+				excitation_current);
+			ret = -EINVAL;
+			goto fail;
+		}
+	}
+
+	of_node_put(phandle);
+	return &thermistor->sensor;
+fail:
+	of_node_put(phandle);
+	return ERR_PTR(ret);
+}
+
+static struct ltc2983_sensor *ltc2983_diode_new(
+					const struct device_node *child,
+					const struct ltc2983_data *st,
+					const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_diode *diode;
+	u32 temp = 0, excitation_current = 0;
+	int ret;
+
+	diode = devm_kzalloc(&st->spi->dev, sizeof(*diode), GFP_KERNEL);
+	if (!diode)
+		return ERR_PTR(-ENOMEM);
+
+	if (of_property_read_bool(child, "adi,single-ended"))
+		diode->sensor_config = LTC2983_DIODE_SGL(1);
+
+	if (of_property_read_bool(child, "adi,three-conversion-cycles"))
+		diode->sensor_config |= LTC2983_DIODE_3_CONV_CYCLE(1);
+
+	if (of_property_read_bool(child, "adi,average-on"))
+		diode->sensor_config |= LTC2983_DIODE_AVERAGE_ON(1);
+
+	/* validate channel index */
+	if (!(diode->sensor_config & LTC2983_DIODE_DIFF_MASK) &&
+	    sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+		dev_err(&st->spi->dev,
+			"Invalid chann:%d for differential thermistor",
+			sensor->chan);
+		return ERR_PTR(-EINVAL);
+	}
+	/* set common parameters */
+	diode->sensor.fault_handler = ltc2983_common_fault_handler;
+	diode->sensor.assign_chan = ltc2983_diode_assign_chan;
+
+	ret = of_property_read_u32(child, "adi,excitation-current-microamp",
+				   &excitation_current);
+	if (!ret) {
+		switch (excitation_current) {
+		case 10:
+			diode->excitation_current = 0x00;
+			break;
+		case 20:
+			diode->excitation_current = 0x01;
+			break;
+		case 40:
+			diode->excitation_current = 0x02;
+			break;
+		case 80:
+			diode->excitation_current = 0x03;
+			break;
+		default:
+			dev_err(&st->spi->dev,
+				"Invalid value for excitation current(%u)",
+				excitation_current);
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
+	of_property_read_u32(child, "adi,ideal-factor-value", &temp);
+
+	/* 2^20 resolution */
+	diode->ideal_factor_value = __convert_to_raw(temp, 1048576);
+
+	return &diode->sensor;
+}
+
+static struct ltc2983_sensor *ltc2983_r_sense_new(struct device_node *child,
+					struct ltc2983_data *st,
+					const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_rsense *rsense;
+	int ret;
+	u32 temp;
+
+	rsense = devm_kzalloc(&st->spi->dev, sizeof(*rsense), GFP_KERNEL);
+	if (!rsense)
+		return ERR_PTR(-ENOMEM);
+
+	/* validate channel index */
+	if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+		dev_err(&st->spi->dev, "Invalid chann:%d for r_sense",
+			sensor->chan);
+		return ERR_PTR(-EINVAL);
+	}
+
+	ret = of_property_read_u32(child, "adi,rsense-val-milli-ohms", &temp);
+	if (ret) {
+		dev_err(&st->spi->dev, "Property adi,rsense-val-milli-ohms missing\n");
+		return ERR_PTR(-EINVAL);
+	}
+	/*
+	 * Times 1000 because we have milli-ohms and __convert_to_raw
+	 * expects scales of 1000000 which are used for all other
+	 * properties.
+	 * 2^10 resolution
+	 */
+	rsense->r_sense_val = __convert_to_raw((u64)temp * 1000, 1024);
+
+	/* set common parameters */
+	rsense->sensor.assign_chan = ltc2983_r_sense_assign_chan;
+
+	return &rsense->sensor;
+}
+
+static struct ltc2983_sensor *ltc2983_adc_new(struct device_node *child,
+					 struct ltc2983_data *st,
+					 const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_adc *adc;
+
+	adc = devm_kzalloc(&st->spi->dev, sizeof(*adc), GFP_KERNEL);
+	if (!adc)
+		return ERR_PTR(-ENOMEM);
+
+	if (of_property_read_bool(child, "adi,single-ended"))
+		adc->single_ended = true;
+
+	if (!adc->single_ended &&
+	    sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+		dev_err(&st->spi->dev, "Invalid chan:%d for differential adc\n",
+			sensor->chan);
+		return ERR_PTR(-EINVAL);
+	}
+	/* set common parameters */
+	adc->sensor.assign_chan = ltc2983_adc_assign_chan;
+	adc->sensor.fault_handler = ltc2983_common_fault_handler;
+
+	return &adc->sensor;
+}
+
+static int ltc2983_chan_read(struct ltc2983_data *st,
+			const struct ltc2983_sensor *sensor, int *val)
+{
+	u32 start_conversion = 0;
+	int ret;
+	unsigned long time;
+
+	start_conversion = LTC2983_STATUS_START(true);
+	start_conversion |= LTC2983_STATUS_CHAN_SEL(sensor->chan);
+	dev_dbg(&st->spi->dev, "Start conversion on chan:%d, status:%02X\n",
+		sensor->chan, start_conversion);
+	/* start conversion */
+	ret = regmap_write(st->regmap, LTC2983_STATUS_REG, start_conversion);
+	if (ret)
+		return ret;
+
+	reinit_completion(&st->completion);
+	/*
+	 * wait for conversion to complete.
+	 * 300 ms should be more than enough to complete the conversion.
+	 * Depending on the sensor configuration, there are 2/3 conversions
+	 * cycles of 82ms.
+	 */
+	time = wait_for_completion_timeout(&st->completion,
+					   msecs_to_jiffies(300));
+	if (!time) {
+		dev_warn(&st->spi->dev, "Conversion timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	/* read the converted data */
+	ret = regmap_bulk_read(st->regmap, LTC2983_CHAN_RES_ADDR(sensor->chan),
+			       &st->temp, sizeof(st->temp));
+	if (ret)
+		return ret;
+
+	*val = __be32_to_cpu(st->temp);
+
+	if (!(LTC2983_RES_VALID_MASK & *val)) {
+		dev_err(&st->spi->dev, "Invalid conversion detected\n");
+		return -EIO;
+	}
+
+	ret = sensor->fault_handler(st, *val);
+	if (ret)
+		return ret;
+
+	*val = sign_extend32((*val) & LTC2983_DATA_MASK, LTC2983_DATA_SIGN_BIT);
+	return 0;
+}
+
+static int ltc2983_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct ltc2983_data *st = iio_priv(indio_dev);
+	int ret;
+
+	/* sanity check */
+	if (chan->address >= st->num_channels) {
+		dev_err(&st->spi->dev, "Invalid chan address:%ld",
+			chan->address);
+		return -EINVAL;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&st->lock);
+		ret = ltc2983_chan_read(st, st->sensors[chan->address], val);
+		mutex_unlock(&st->lock);
+		return ret ?: IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			/* value in milli degrees */
+			*val = 1000;
+			/* 2^10 */
+			*val2 = 1024;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_VOLTAGE:
+			/* value in millivolt */
+			*val = 1000;
+			/* 2^21 */
+			*val2 = 2097152;
+			return IIO_VAL_FRACTIONAL;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int ltc2983_reg_access(struct iio_dev *indio_dev,
+			      unsigned int reg,
+			      unsigned int writeval,
+			      unsigned int *readval)
+{
+	struct ltc2983_data *st = iio_priv(indio_dev);
+
+	if (readval)
+		return regmap_read(st->regmap, reg, readval);
+	else
+		return regmap_write(st->regmap, reg, writeval);
+}
+
+static irqreturn_t ltc2983_irq_handler(int irq, void *data)
+{
+	struct ltc2983_data *st = data;
+
+	complete(&st->completion);
+	return IRQ_HANDLED;
+}
+
+#define LTC2983_CHAN(__type, index, __address) ({ \
+	struct iio_chan_spec __chan = { \
+		.type = __type, \
+		.indexed = 1, \
+		.channel = index, \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.address = __address, \
+	}; \
+	__chan; \
+})
+
+static int ltc2983_parse_dt(struct ltc2983_data *st)
+{
+	struct device_node *child;
+	struct device *dev = &st->spi->dev;
+	int ret = 0, chan = 0, channel_avail_mask = 0;
+
+	of_property_read_u32(dev->of_node, "adi,mux-delay-config-us",
+			     &st->mux_delay_config);
+
+	of_property_read_u32(dev->of_node, "adi,filter-notch-freq",
+			     &st->filter_notch_freq);
+
+	st->num_channels = of_get_available_child_count(dev->of_node);
+	st->sensors = devm_kcalloc(dev, st->num_channels, sizeof(*st->sensors),
+				   GFP_KERNEL);
+	if (!st->sensors)
+		return -ENOMEM;
+
+	st->iio_channels = st->num_channels;
+	for_each_available_child_of_node(dev->of_node, child) {
+		struct ltc2983_sensor sensor;
+
+		ret = of_property_read_u32(child, "reg", &sensor.chan);
+		if (ret) {
+			dev_err(dev, "reg property must given for child nodes\n");
+			return ret;
+		}
+
+		/* check if we have a valid channel */
+		if (sensor.chan < LTC2983_MIN_CHANNELS_NR ||
+		    sensor.chan > LTC2983_MAX_CHANNELS_NR) {
+			dev_err(dev,
+				"chan:%d must be from 1 to 20\n", sensor.chan);
+			return -EINVAL;
+		} else if (channel_avail_mask & BIT(sensor.chan)) {
+			dev_err(dev, "chan:%d already in use\n", sensor.chan);
+			return -EINVAL;
+		}
+
+		ret = of_property_read_u32(child, "adi,sensor-type",
+					       &sensor.type);
+		if (ret) {
+			dev_err(dev,
+				"adi,sensor-type property must given for child nodes\n");
+			return ret;
+		}
+
+		dev_dbg(dev, "Create new sensor, type %u, chann %u",
+								sensor.type,
+								sensor.chan);
+
+		if (sensor.type >= LTC2983_SENSOR_THERMOCOUPLE &&
+		    sensor.type <= LTC2983_SENSOR_THERMOCOUPLE_CUSTOM) {
+			st->sensors[chan] = ltc2983_thermocouple_new(child, st,
+								     &sensor);
+		} else if (sensor.type >= LTC2983_SENSOR_RTD &&
+			   sensor.type <= LTC2983_SENSOR_RTD_CUSTOM) {
+			st->sensors[chan] = ltc2983_rtd_new(child, st, &sensor);
+		} else if (sensor.type >= LTC2983_SENSOR_THERMISTOR &&
+			   sensor.type <= LTC2983_SENSOR_THERMISTOR_CUSTOM) {
+			st->sensors[chan] = ltc2983_thermistor_new(child, st,
+								   &sensor);
+		} else if (sensor.type == LTC2983_SENSOR_DIODE) {
+			st->sensors[chan] = ltc2983_diode_new(child, st,
+							      &sensor);
+		} else if (sensor.type == LTC2983_SENSOR_SENSE_RESISTOR) {
+			st->sensors[chan] = ltc2983_r_sense_new(child, st,
+								&sensor);
+			/* don't add rsense to iio */
+			st->iio_channels--;
+		} else if (sensor.type == LTC2983_SENSOR_DIRECT_ADC) {
+			st->sensors[chan] = ltc2983_adc_new(child, st, &sensor);
+		} else {
+			dev_err(dev, "Unknown sensor type %d\n", sensor.type);
+			return -EINVAL;
+		}
+
+		if (IS_ERR(st->sensors[chan])) {
+			dev_err(dev, "Failed to create sensor %ld",
+				PTR_ERR(st->sensors[chan]));
+			return PTR_ERR(st->sensors[chan]);
+		}
+		/* set generic sensor parameters */
+		st->sensors[chan]->chan = sensor.chan;
+		st->sensors[chan]->type = sensor.type;
+
+		channel_avail_mask |= BIT(sensor.chan);
+		chan++;
+	}
+
+	return 0;
+}
+
+static int ltc2983_setup(struct ltc2983_data *st, bool assign_iio)
+{
+	u32 iio_chan_t = 0, iio_chan_v = 0, chan, iio_idx = 0;
+	int ret;
+	unsigned long time;
+
+	/* make sure the device is up */
+	time = wait_for_completion_timeout(&st->completion,
+					    msecs_to_jiffies(250));
+
+	if (!time) {
+		dev_err(&st->spi->dev, "Device startup timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	st->iio_chan = devm_kzalloc(&st->spi->dev,
+				    st->iio_channels * sizeof(*st->iio_chan),
+				    GFP_KERNEL);
+
+	if (!st->iio_chan)
+		return -ENOMEM;
+
+	ret = regmap_update_bits(st->regmap, LTC2983_GLOBAL_CONFIG_REG,
+				 LTC2983_NOTCH_FREQ_MASK,
+				 LTC2983_NOTCH_FREQ(st->filter_notch_freq));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(st->regmap, LTC2983_MUX_CONFIG_REG,
+			   st->mux_delay_config);
+	if (ret)
+		return ret;
+
+	for (chan = 0; chan < st->num_channels; chan++) {
+		u32 chan_type = 0, *iio_chan;
+
+		ret = st->sensors[chan]->assign_chan(st, st->sensors[chan]);
+		if (ret)
+			return ret;
+		/*
+		 * The assign_iio flag is necessary for when the device is
+		 * coming out of sleep. In that case, we just need to
+		 * re-configure the device channels.
+		 * We also don't assign iio channels for rsense.
+		 */
+		if (st->sensors[chan]->type == LTC2983_SENSOR_SENSE_RESISTOR ||
+		    !assign_iio)
+			continue;
+
+		/* assign iio channel */
+		if (st->sensors[chan]->type != LTC2983_SENSOR_DIRECT_ADC) {
+			chan_type = IIO_TEMP;
+			iio_chan = &iio_chan_t;
+		} else {
+			chan_type = IIO_VOLTAGE;
+			iio_chan = &iio_chan_v;
+		}
+
+		/*
+		 * add chan as the iio .address so that, we can directly
+		 * reference the sensor given the iio_chan_spec
+		 */
+		st->iio_chan[iio_idx++] = LTC2983_CHAN(chan_type, (*iio_chan)++,
+						       chan);
+	}
+
+	return 0;
+}
+
+static const struct regmap_range ltc2983_reg_ranges[] = {
+	regmap_reg_range(LTC2983_STATUS_REG, LTC2983_STATUS_REG),
+	regmap_reg_range(LTC2983_TEMP_RES_START_REG, LTC2983_TEMP_RES_END_REG),
+	regmap_reg_range(LTC2983_GLOBAL_CONFIG_REG, LTC2983_GLOBAL_CONFIG_REG),
+	regmap_reg_range(LTC2983_MULT_CHANNEL_START_REG,
+			 LTC2983_MULT_CHANNEL_END_REG),
+	regmap_reg_range(LTC2983_MUX_CONFIG_REG, LTC2983_MUX_CONFIG_REG),
+	regmap_reg_range(LTC2983_CHAN_ASSIGN_START_REG,
+			 LTC2983_CHAN_ASSIGN_END_REG),
+	regmap_reg_range(LTC2983_CUST_SENS_TBL_START_REG,
+			 LTC2983_CUST_SENS_TBL_END_REG),
+};
+
+static const struct regmap_access_table ltc2983_reg_table = {
+	.yes_ranges = ltc2983_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(ltc2983_reg_ranges),
+};
+
+/*
+ *  The reg_bits are actually 12 but the device needs the first *complete*
+ *  byte for the command (R/W).
+ */
+static const struct regmap_config ltc2983_regmap_config = {
+	.reg_bits = 24,
+	.val_bits = 8,
+	.wr_table = &ltc2983_reg_table,
+	.rd_table = &ltc2983_reg_table,
+	.read_flag_mask = GENMASK(1, 0),
+	.write_flag_mask = BIT(1),
+};
+
+static const struct  iio_info ltc2983_iio_info = {
+	.read_raw = ltc2983_read_raw,
+	.debugfs_reg_access = ltc2983_reg_access,
+};
+
+static int ltc2983_probe(struct spi_device *spi)
+{
+	struct ltc2983_data *st;
+	struct iio_dev *indio_dev;
+	const char *name = spi_get_device_id(spi)->name;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->regmap = devm_regmap_init_spi(spi, &ltc2983_regmap_config);
+	if (IS_ERR(st->regmap)) {
+		dev_err(&spi->dev, "Failed to initialize regmap\n");
+		return PTR_ERR(st->regmap);
+	}
+
+	mutex_init(&st->lock);
+	init_completion(&st->completion);
+	st->spi = spi;
+	spi_set_drvdata(spi, st);
+
+	ret = ltc2983_parse_dt(st);
+	if (ret)
+		return ret;
+	/*
+	 * let's request the irq now so it is used to sync the device
+	 * startup in ltc2983_setup()
+	 */
+	ret = devm_request_irq(&spi->dev, spi->irq, ltc2983_irq_handler,
+			       IRQF_TRIGGER_RISING, name, st);
+	if (ret) {
+		dev_err(&spi->dev, "failed to request an irq, %d", ret);
+		return ret;
+	}
+
+	ret = ltc2983_setup(st, true);
+	if (ret)
+		return ret;
+
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = name;
+	indio_dev->num_channels = st->iio_channels;
+	indio_dev->channels = st->iio_chan;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ltc2983_iio_info;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static int __maybe_unused ltc2983_resume(struct device *dev)
+{
+	struct ltc2983_data *st = spi_get_drvdata(to_spi_device(dev));
+	int dummy;
+
+	/* dummy read to bring the device out of sleep */
+	regmap_read(st->regmap, LTC2983_STATUS_REG, &dummy);
+	/* we need to re-assign the channels */
+	return ltc2983_setup(st, false);
+}
+
+static int __maybe_unused ltc2983_suspend(struct device *dev)
+{
+	struct ltc2983_data *st = spi_get_drvdata(to_spi_device(dev));
+
+	return regmap_write(st->regmap, LTC2983_STATUS_REG, LTC2983_SLEEP);
+}
+
+static SIMPLE_DEV_PM_OPS(ltc2983_pm_ops, ltc2983_suspend, ltc2983_resume);
+
+static const struct spi_device_id ltc2983_id_table[] = {
+	{ "ltc2983" },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, ltc2983_id_table);
+
+static const struct of_device_id ltc2983_of_match[] = {
+	{ .compatible = "adi,ltc2983" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltc2983_of_match);
+
+static struct spi_driver ltc2983_driver = {
+	.driver = {
+		.name = "ltc2983",
+		.of_match_table = ltc2983_of_match,
+		.pm = &ltc2983_pm_ops,
+	},
+	.probe = ltc2983_probe,
+	.id_table = ltc2983_id_table,
+};
+
+module_spi_driver(ltc2983_driver);
+
+MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
+MODULE_DESCRIPTION("Analog Devices LTC2983 SPI Temperature sensors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c
index 2ab68282d0b6..d1360605209c 100644
--- a/drivers/iio/temperature/maxim_thermocouple.c
+++ b/drivers/iio/temperature/maxim_thermocouple.c
@@ -194,7 +194,7 @@ static int maxim_thermocouple_read_raw(struct iio_dev *indio_dev,
 		default:
 			*val = 250; /* 1000 * 0.25 */
 			ret = IIO_VAL_INT;
-		};
+		}
 		break;
 	}
 
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ae24d3ea68ea..420900852166 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1210,13 +1210,6 @@ config AB8500_DEBUG
 	  Select this option if you want debug information using the debug
 	  filesystem, debugfs.
 
-config AB8500_GPADC
-	bool "ST-Ericsson AB8500 GPADC driver"
-	depends on AB8500_CORE && REGULATOR_AB8500
-	default y
-	help
-	  AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
-
 config MFD_DB8500_PRCMU
 	bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
 	depends on UX500_SOC_DB8500
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c1067ea46204..aed99f08739f 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -177,7 +177,6 @@ obj-$(CONFIG_ABX500_CORE)	+= abx500-core.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
 obj-$(CONFIG_AB8500_DEBUG)	+= ab8500-debugfs.o
-obj-$(CONFIG_AB8500_GPADC)	+= ab8500-gpadc.o
 obj-$(CONFIG_MFD_DB8500_PRCMU)	+= db8500-prcmu.o
 # ab8500-core need to come after db8500-prcmu (which provides the channel)
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index f4e26b6e5362..1a9a3414d4fa 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -84,7 +84,6 @@
 
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
 
 #ifdef CONFIG_DEBUG_FS
 #include <linux/string.h>
@@ -103,11 +102,6 @@ static int num_irqs;
 static struct device_attribute **dev_attr;
 static char **event_name;
 
-static u8 avg_sample = SAMPLE_16;
-static u8 trig_edge = RISING_EDGE;
-static u8 conv_type = ADC_SW;
-static u8 trig_timer;
-
 /**
  * struct ab8500_reg_range
  * @first: the first address of the range
@@ -152,7 +146,6 @@ static struct hwreg_cfg hwreg_cfg = {
 };
 
 #define AB8500_NAME_STRING "ab8500"
-#define AB8500_ADC_NAME_STRING "gpadc"
 #define AB8500_NUM_BANKS AB8500_DEBUG_FIELD_LAST
 
 #define AB8500_REV_REG 0x80
@@ -1646,633 +1639,6 @@ report_write_failure:
 
 DEFINE_SHOW_ATTRIBUTE(ab8500_modem);
 
-static int ab8500_gpadc_bat_ctrl_show(struct seq_file *s, void *p)
-{
-	int bat_ctrl_raw;
-	int bat_ctrl_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		BAT_CTRL, bat_ctrl_raw);
-
-	seq_printf(s, "%d,0x%X\n", bat_ctrl_convert, bat_ctrl_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_bat_ctrl);
-
-static int ab8500_gpadc_btemp_ball_show(struct seq_file *s, void *p)
-{
-	int btemp_ball_raw;
-	int btemp_ball_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
-		btemp_ball_raw);
-
-	seq_printf(s, "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_btemp_ball);
-
-static int ab8500_gpadc_main_charger_v_show(struct seq_file *s, void *p)
-{
-	int main_charger_v_raw;
-	int main_charger_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		MAIN_CHARGER_V, main_charger_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", main_charger_v_convert, main_charger_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_main_charger_v);
-
-static int ab8500_gpadc_acc_detect1_show(struct seq_file *s, void *p)
-{
-	int acc_detect1_raw;
-	int acc_detect1_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1,
-		acc_detect1_raw);
-
-	seq_printf(s, "%d,0x%X\n", acc_detect1_convert, acc_detect1_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_acc_detect1);
-
-static int ab8500_gpadc_acc_detect2_show(struct seq_file *s, void *p)
-{
-	int acc_detect2_raw;
-	int acc_detect2_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		ACC_DETECT2, acc_detect2_raw);
-
-	seq_printf(s, "%d,0x%X\n", acc_detect2_convert, acc_detect2_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_acc_detect2);
-
-static int ab8500_gpadc_aux1_show(struct seq_file *s, void *p)
-{
-	int aux1_raw;
-	int aux1_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1,
-		aux1_raw);
-
-	seq_printf(s, "%d,0x%X\n", aux1_convert, aux1_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_aux1);
-
-static int ab8500_gpadc_aux2_show(struct seq_file *s, void *p)
-{
-	int aux2_raw;
-	int aux2_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2,
-		aux2_raw);
-
-	seq_printf(s, "%d,0x%X\n", aux2_convert, aux2_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_aux2);
-
-static int ab8500_gpadc_main_bat_v_show(struct seq_file *s, void *p)
-{
-	int main_bat_v_raw;
-	int main_bat_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
-		main_bat_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", main_bat_v_convert, main_bat_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_main_bat_v);
-
-static int ab8500_gpadc_vbus_v_show(struct seq_file *s, void *p)
-{
-	int vbus_v_raw;
-	int vbus_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbus_v_raw =  ab8500_gpadc_read_raw(gpadc, VBUS_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V,
-		vbus_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", vbus_v_convert, vbus_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_vbus_v);
-
-static int ab8500_gpadc_main_charger_c_show(struct seq_file *s, void *p)
-{
-	int main_charger_c_raw;
-	int main_charger_c_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		MAIN_CHARGER_C, main_charger_c_raw);
-
-	seq_printf(s, "%d,0x%X\n", main_charger_c_convert, main_charger_c_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_main_charger_c);
-
-static int ab8500_gpadc_usb_charger_c_show(struct seq_file *s, void *p)
-{
-	int usb_charger_c_raw;
-	int usb_charger_c_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		USB_CHARGER_C, usb_charger_c_raw);
-
-	seq_printf(s, "%d,0x%X\n", usb_charger_c_convert, usb_charger_c_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_usb_charger_c);
-
-static int ab8500_gpadc_bk_bat_v_show(struct seq_file *s, void *p)
-{
-	int bk_bat_v_raw;
-	int bk_bat_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		BK_BAT_V, bk_bat_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", bk_bat_v_convert, bk_bat_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_bk_bat_v);
-
-static int ab8500_gpadc_die_temp_show(struct seq_file *s, void *p)
-{
-	int die_temp_raw;
-	int die_temp_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP,
-		die_temp_raw);
-
-	seq_printf(s, "%d,0x%X\n", die_temp_convert, die_temp_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_die_temp);
-
-static int ab8500_gpadc_usb_id_show(struct seq_file *s, void *p)
-{
-	int usb_id_raw;
-	int usb_id_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	usb_id_raw = ab8500_gpadc_read_raw(gpadc, USB_ID,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	usb_id_convert = ab8500_gpadc_ad_to_voltage(gpadc, USB_ID,
-		usb_id_raw);
-
-	seq_printf(s, "%d,0x%X\n", usb_id_convert, usb_id_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_usb_id);
-
-static int ab8540_gpadc_xtal_temp_show(struct seq_file *s, void *p)
-{
-	int xtal_temp_raw;
-	int xtal_temp_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	xtal_temp_raw = ab8500_gpadc_read_raw(gpadc, XTAL_TEMP,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	xtal_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, XTAL_TEMP,
-		xtal_temp_raw);
-
-	seq_printf(s, "%d,0x%X\n", xtal_temp_convert, xtal_temp_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_xtal_temp);
-
-static int ab8540_gpadc_vbat_true_meas_show(struct seq_file *s, void *p)
-{
-	int vbat_true_meas_raw;
-	int vbat_true_meas_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbat_true_meas_raw = ab8500_gpadc_read_raw(gpadc, VBAT_TRUE_MEAS,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	vbat_true_meas_convert =
-		ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS,
-					   vbat_true_meas_raw);
-
-	seq_printf(s, "%d,0x%X\n", vbat_true_meas_convert, vbat_true_meas_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_vbat_true_meas);
-
-static int ab8540_gpadc_bat_ctrl_and_ibat_show(struct seq_file *s, void *p)
-{
-	int bat_ctrl_raw;
-	int bat_ctrl_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bat_ctrl_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_CTRL_AND_IBAT,
-		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
-
-	bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, BAT_CTRL,
-		bat_ctrl_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   bat_ctrl_convert, bat_ctrl_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_bat_ctrl_and_ibat);
-
-static int ab8540_gpadc_vbat_meas_and_ibat_show(struct seq_file *s, void *p)
-{
-	int vbat_meas_raw;
-	int vbat_meas_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbat_meas_raw = ab8500_gpadc_double_read_raw(gpadc, VBAT_MEAS_AND_IBAT,
-		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
-	vbat_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
-		vbat_meas_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   vbat_meas_convert, vbat_meas_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_vbat_meas_and_ibat);
-
-static int ab8540_gpadc_vbat_true_meas_and_ibat_show(struct seq_file *s, void *p)
-{
-	int vbat_true_meas_raw;
-	int vbat_true_meas_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbat_true_meas_raw = ab8500_gpadc_double_read_raw(gpadc,
-			VBAT_TRUE_MEAS_AND_IBAT, avg_sample, trig_edge,
-			trig_timer, conv_type, &ibat_raw);
-	vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-			VBAT_TRUE_MEAS, vbat_true_meas_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   vbat_true_meas_convert, vbat_true_meas_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_vbat_true_meas_and_ibat);
-
-static int ab8540_gpadc_bat_temp_and_ibat_show(struct seq_file *s, void *p)
-{
-	int bat_temp_raw;
-	int bat_temp_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bat_temp_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_TEMP_AND_IBAT,
-		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
-	bat_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
-		bat_temp_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   bat_temp_convert, bat_temp_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_bat_temp_and_ibat);
-
-static int ab8540_gpadc_otp_calib_show(struct seq_file *s, void *p)
-{
-	struct ab8500_gpadc *gpadc;
-	u16 vmain_l, vmain_h, btemp_l, btemp_h;
-	u16 vbat_l, vbat_h, ibat_l, ibat_h;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	ab8540_gpadc_get_otp(gpadc, &vmain_l, &vmain_h, &btemp_l, &btemp_h,
-			&vbat_l, &vbat_h, &ibat_l, &ibat_h);
-	seq_printf(s,
-		   "VMAIN_L:0x%X\n"
-		   "VMAIN_H:0x%X\n"
-		   "BTEMP_L:0x%X\n"
-		   "BTEMP_H:0x%X\n"
-		   "VBAT_L:0x%X\n"
-		   "VBAT_H:0x%X\n"
-		   "IBAT_L:0x%X\n"
-		   "IBAT_H:0x%X\n",
-		   vmain_l, vmain_h, btemp_l, btemp_h,
-		   vbat_l, vbat_h, ibat_l, ibat_h);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_otp_calib);
-
-static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", avg_sample);
-
-	return 0;
-}
-
-static int ab8500_gpadc_avg_sample_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_avg_sample_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_avg_sample_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_avg_sample;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_avg_sample);
-	if (err)
-		return err;
-
-	if ((user_avg_sample == SAMPLE_1) || (user_avg_sample == SAMPLE_4)
-			|| (user_avg_sample == SAMPLE_8)
-			|| (user_avg_sample == SAMPLE_16)) {
-		avg_sample = (u8) user_avg_sample;
-	} else {
-		dev_err(dev,
-			"debugfs err input: should be egal to 1, 4, 8 or 16\n");
-		return -EINVAL;
-	}
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_avg_sample_fops = {
-	.open = ab8500_gpadc_avg_sample_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_avg_sample_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab8500_gpadc_trig_edge_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", trig_edge);
-
-	return 0;
-}
-
-static int ab8500_gpadc_trig_edge_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_trig_edge_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_trig_edge_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_trig_edge;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_trig_edge);
-	if (err)
-		return err;
-
-	if ((user_trig_edge == RISING_EDGE)
-			|| (user_trig_edge == FALLING_EDGE)) {
-		trig_edge = (u8) user_trig_edge;
-	} else {
-		dev_err(dev, "Wrong input:\n"
-			"Enter 0. Rising edge\n"
-			"Enter 1. Falling edge\n");
-		return -EINVAL;
-	}
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_trig_edge_fops = {
-	.open = ab8500_gpadc_trig_edge_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_trig_edge_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab8500_gpadc_trig_timer_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", trig_timer);
-
-	return 0;
-}
-
-static int ab8500_gpadc_trig_timer_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_trig_timer_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_trig_timer_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_trig_timer;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_trig_timer);
-	if (err)
-		return err;
-
-	if (user_trig_timer & ~0xFF) {
-		dev_err(dev,
-			"debugfs error input: should be between 0 to 255\n");
-		return -EINVAL;
-	}
-
-	trig_timer = (u8) user_trig_timer;
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_trig_timer_fops = {
-	.open = ab8500_gpadc_trig_timer_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_trig_timer_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab8500_gpadc_conv_type_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", conv_type);
-
-	return 0;
-}
-
-static int ab8500_gpadc_conv_type_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_conv_type_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_conv_type_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_conv_type;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_conv_type);
-	if (err)
-		return err;
-
-	if ((user_conv_type == ADC_SW)
-			|| (user_conv_type == ADC_HW)) {
-		conv_type = (u8) user_conv_type;
-	} else {
-		dev_err(dev, "Wrong input:\n"
-			"Enter 0. ADC SW conversion\n"
-			"Enter 1. ADC HW conversion\n");
-		return -EINVAL;
-	}
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_conv_type_fops = {
-	.open = ab8500_gpadc_conv_type_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_conv_type_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
 /*
  * return length of an ASCII numerical value, 0 is string is not a
  * numerical value.
@@ -2647,7 +2013,6 @@ static const struct file_operations ab8500_hwreg_fops = {
 static int ab8500_debug_probe(struct platform_device *plf)
 {
 	struct dentry *ab8500_dir;
-	struct dentry *ab8500_gpadc_dir;
 	struct ab8500 *ab8500;
 	struct resource *res;
 
@@ -2689,9 +2054,6 @@ static int ab8500_debug_probe(struct platform_device *plf)
 
 	ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL);
 
-	ab8500_gpadc_dir = debugfs_create_dir(AB8500_ADC_NAME_STRING,
-					      ab8500_dir);
-
 	debugfs_create_file("all-bank-registers", S_IRUGO, ab8500_dir,
 			    &plf->dev, &ab8500_bank_registers_fops);
 	debugfs_create_file("all-banks", S_IRUGO, ab8500_dir,
@@ -2727,83 +2089,6 @@ static int ab8500_debug_probe(struct platform_device *plf)
 			    &plf->dev, &ab8500_hwreg_fops);
 	debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP),
 			    ab8500_dir, &plf->dev, &ab8500_modem_fops);
-	debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_bat_ctrl_fops);
-	debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_btemp_ball_fops);
-	debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_main_charger_v_fops);
-	debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_acc_detect1_fops);
-	debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_acc_detect2_fops);
-	debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_aux1_fops);
-	debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_aux2_fops);
-	debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_main_bat_v_fops);
-	debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_vbus_v_fops);
-	debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_main_charger_c_fops);
-	debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_usb_charger_c_fops);
-	debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_bk_bat_v_fops);
-	debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_die_temp_fops);
-	debugfs_create_file("usb_id", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_usb_id_fops);
-	if (is_ab8540(ab8500)) {
-		debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_xtal_temp_fops);
-		debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_vbat_true_meas_fops);
-		debugfs_create_file("batctrl_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_bat_ctrl_and_ibat_fops);
-		debugfs_create_file("vbatmeas_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_vbat_meas_and_ibat_fops);
-		debugfs_create_file("vbattruemeas_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_vbat_true_meas_and_ibat_fops);
-		debugfs_create_file("battemp_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_bat_temp_and_ibat_fops);
-		debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_otp_calib_fops);
-	}
-	debugfs_create_file("avg_sample", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_avg_sample_fops);
-	debugfs_create_file("trig_edge", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_trig_edge_fops);
-	debugfs_create_file("trig_timer", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_trig_timer_fops);
-	debugfs_create_file("conv_type", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_conv_type_fops);
 
 	return 0;
 }
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
deleted file mode 100644
index 005f9ee34cd1..000000000000
--- a/drivers/mfd/ab8500-gpadc.c
+++ /dev/null
@@ -1,1075 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Arun R Murthy <arun.murthy@stericsson.com>
- * Author: Daniel Willerud <daniel.willerud@stericsson.com>
- * Author: Johan Palsson <johan.palsson@stericsson.com>
- * Author: M'boumba Cedric Madianga
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/pm_runtime.h>
-#include <linux/platform_device.h>
-#include <linux/completion.h>
-#include <linux/regulator/consumer.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
-
-/*
- * GPADC register offsets
- * Bank : 0x0A
- */
-#define AB8500_GPADC_CTRL1_REG		0x00
-#define AB8500_GPADC_CTRL2_REG		0x01
-#define AB8500_GPADC_CTRL3_REG		0x02
-#define AB8500_GPADC_AUTO_TIMER_REG	0x03
-#define AB8500_GPADC_STAT_REG		0x04
-#define AB8500_GPADC_MANDATAL_REG	0x05
-#define AB8500_GPADC_MANDATAH_REG	0x06
-#define AB8500_GPADC_AUTODATAL_REG	0x07
-#define AB8500_GPADC_AUTODATAH_REG	0x08
-#define AB8500_GPADC_MUX_CTRL_REG	0x09
-#define AB8540_GPADC_MANDATA2L_REG	0x09
-#define AB8540_GPADC_MANDATA2H_REG	0x0A
-#define AB8540_GPADC_APEAAX_REG		0x10
-#define AB8540_GPADC_APEAAT_REG		0x11
-#define AB8540_GPADC_APEAAM_REG		0x12
-#define AB8540_GPADC_APEAAH_REG		0x13
-#define AB8540_GPADC_APEAAL_REG		0x14
-
-/*
- * OTP register offsets
- * Bank : 0x15
- */
-#define AB8500_GPADC_CAL_1	0x0F
-#define AB8500_GPADC_CAL_2	0x10
-#define AB8500_GPADC_CAL_3	0x11
-#define AB8500_GPADC_CAL_4	0x12
-#define AB8500_GPADC_CAL_5	0x13
-#define AB8500_GPADC_CAL_6	0x14
-#define AB8500_GPADC_CAL_7	0x15
-/* New calibration for 8540 */
-#define AB8540_GPADC_OTP4_REG_7	0x38
-#define AB8540_GPADC_OTP4_REG_6	0x39
-#define AB8540_GPADC_OTP4_REG_5	0x3A
-
-/* gpadc constants */
-#define EN_VINTCORE12		0x04
-#define EN_VTVOUT		0x02
-#define EN_GPADC		0x01
-#define DIS_GPADC		0x00
-#define AVG_1			0x00
-#define AVG_4			0x20
-#define AVG_8			0x40
-#define AVG_16			0x60
-#define ADC_SW_CONV		0x04
-#define EN_ICHAR		0x80
-#define BTEMP_PULL_UP		0x08
-#define EN_BUF			0x40
-#define DIS_ZERO		0x00
-#define GPADC_BUSY		0x01
-#define EN_FALLING		0x10
-#define EN_TRIG_EDGE		0x02
-#define EN_VBIAS_XTAL_TEMP	0x02
-
-/* GPADC constants from AB8500 spec, UM0836 */
-#define ADC_RESOLUTION		1024
-#define ADC_CH_BTEMP_MIN	0
-#define ADC_CH_BTEMP_MAX	1350
-#define ADC_CH_DIETEMP_MIN	0
-#define ADC_CH_DIETEMP_MAX	1350
-#define ADC_CH_CHG_V_MIN	0
-#define ADC_CH_CHG_V_MAX	20030
-#define ADC_CH_ACCDET2_MIN	0
-#define ADC_CH_ACCDET2_MAX	2500
-#define ADC_CH_VBAT_MIN		2300
-#define ADC_CH_VBAT_MAX		4800
-#define ADC_CH_CHG_I_MIN	0
-#define ADC_CH_CHG_I_MAX	1500
-#define ADC_CH_BKBAT_MIN	0
-#define ADC_CH_BKBAT_MAX	3200
-
-/* GPADC constants from AB8540 spec */
-#define ADC_CH_IBAT_MIN		(-6000) /* mA range measured by ADC for ibat */
-#define ADC_CH_IBAT_MAX		6000
-#define ADC_CH_IBAT_MIN_V	(-60)	/* mV range measured by ADC for ibat */
-#define ADC_CH_IBAT_MAX_V	60
-#define IBAT_VDROP_L		(-56)  /* mV */
-#define IBAT_VDROP_H		56
-
-/* This is used to not lose precision when dividing to get gain and offset */
-#define CALIB_SCALE		1000
-/*
- * Number of bits shift used to not lose precision
- * when dividing to get ibat gain.
- */
-#define CALIB_SHIFT_IBAT	20
-
-/* Time in ms before disabling regulator */
-#define GPADC_AUDOSUSPEND_DELAY		1
-
-#define CONVERSION_TIME			500 /* ms */
-
-enum cal_channels {
-	ADC_INPUT_VMAIN = 0,
-	ADC_INPUT_BTEMP,
-	ADC_INPUT_VBAT,
-	ADC_INPUT_IBAT,
-	NBR_CAL_INPUTS,
-};
-
-/**
- * struct adc_cal_data - Table for storing gain and offset for the calibrated
- * ADC channels
- * @gain:		Gain of the ADC channel
- * @offset:		Offset of the ADC channel
- */
-struct adc_cal_data {
-	s64 gain;
-	s64 offset;
-	u16 otp_calib_hi;
-	u16 otp_calib_lo;
-};
-
-/**
- * struct ab8500_gpadc - AB8500 GPADC device information
- * @dev:			pointer to the struct device
- * @node:			a list of AB8500 GPADCs, hence prepared for
-				reentrance
- * @parent:			pointer to the struct ab8500
- * @ab8500_gpadc_complete:	pointer to the struct completion, to indicate
- *				the completion of gpadc conversion
- * @ab8500_gpadc_lock:		structure of type mutex
- * @regu:			pointer to the struct regulator
- * @irq_sw:			interrupt number that is used by gpadc for Sw
- *				conversion
- * @irq_hw:			interrupt number that is used by gpadc for Hw
- *				conversion
- * @cal_data			array of ADC calibration data structs
- */
-struct ab8500_gpadc {
-	struct device *dev;
-	struct list_head node;
-	struct ab8500 *parent;
-	struct completion ab8500_gpadc_complete;
-	struct mutex ab8500_gpadc_lock;
-	struct regulator *regu;
-	int irq_sw;
-	int irq_hw;
-	struct adc_cal_data cal_data[NBR_CAL_INPUTS];
-};
-
-static LIST_HEAD(ab8500_gpadc_list);
-
-/**
- * ab8500_gpadc_get() - returns a reference to the primary AB8500 GPADC
- * (i.e. the first GPADC in the instance list)
- */
-struct ab8500_gpadc *ab8500_gpadc_get(char *name)
-{
-	struct ab8500_gpadc *gpadc;
-
-	list_for_each_entry(gpadc, &ab8500_gpadc_list, node) {
-		if (!strcmp(name, dev_name(gpadc->dev)))
-			return gpadc;
-	}
-
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(ab8500_gpadc_get);
-
-/**
- * ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage
- */
-int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
-	int ad_value)
-{
-	int res;
-
-	switch (channel) {
-	case MAIN_CHARGER_V:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_VMAIN].gain) {
-			res = ADC_CH_CHG_V_MIN + (ADC_CH_CHG_V_MAX -
-				ADC_CH_CHG_V_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VMAIN].gain +
-			gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE;
-		break;
-
-	case XTAL_TEMP:
-	case BAT_CTRL:
-	case BTEMP_BALL:
-	case ACC_DETECT1:
-	case ADC_AUX1:
-	case ADC_AUX2:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_BTEMP].gain) {
-			res = ADC_CH_BTEMP_MIN + (ADC_CH_BTEMP_MAX -
-				ADC_CH_BTEMP_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_BTEMP].gain +
-			gpadc->cal_data[ADC_INPUT_BTEMP].offset) / CALIB_SCALE;
-		break;
-
-	case MAIN_BAT_V:
-	case VBAT_TRUE_MEAS:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) {
-			res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX -
-				ADC_CH_VBAT_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VBAT].gain +
-			gpadc->cal_data[ADC_INPUT_VBAT].offset) / CALIB_SCALE;
-		break;
-
-	case DIE_TEMP:
-		res = ADC_CH_DIETEMP_MIN +
-			(ADC_CH_DIETEMP_MAX - ADC_CH_DIETEMP_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case ACC_DETECT2:
-		res = ADC_CH_ACCDET2_MIN +
-			(ADC_CH_ACCDET2_MAX - ADC_CH_ACCDET2_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case VBUS_V:
-		res = ADC_CH_CHG_V_MIN +
-			(ADC_CH_CHG_V_MAX - ADC_CH_CHG_V_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case MAIN_CHARGER_C:
-	case USB_CHARGER_C:
-		res = ADC_CH_CHG_I_MIN +
-			(ADC_CH_CHG_I_MAX - ADC_CH_CHG_I_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case BK_BAT_V:
-		res = ADC_CH_BKBAT_MIN +
-			(ADC_CH_BKBAT_MAX - ADC_CH_BKBAT_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case IBAT_VIRTUAL_CHANNEL:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_IBAT].gain) {
-			res = ADC_CH_IBAT_MIN + (ADC_CH_IBAT_MAX -
-				ADC_CH_IBAT_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_IBAT].gain +
-				gpadc->cal_data[ADC_INPUT_IBAT].offset)
-				>> CALIB_SHIFT_IBAT;
-		break;
-
-	default:
-		dev_err(gpadc->dev,
-			"unknown channel, not possible to convert\n");
-		res = -EINVAL;
-		break;
-
-	}
-	return res;
-}
-EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
-
-/**
- * ab8500_gpadc_sw_hw_convert() - gpadc conversion
- * @channel:	analog channel to be converted to digital data
- * @avg_sample:  number of ADC sample to average
- * @trig_egde:  selected ADC trig edge
- * @trig_timer: selected ADC trigger delay timer
- * @conv_type: selected conversion type (HW or SW conversion)
- *
- * This function converts the selected analog i/p to digital
- * data.
- */
-int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
-{
-	int ad_value;
-	int voltage;
-
-	ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
-			trig_edge, trig_timer, conv_type);
-
-	/* On failure retry a second time */
-	if (ad_value < 0)
-		ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
-			trig_edge, trig_timer, conv_type);
-	if (ad_value < 0) {
-		dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
-				channel);
-		return ad_value;
-	}
-
-	voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
-	if (voltage < 0)
-		dev_err(gpadc->dev,
-			"GPADC to voltage conversion failed ch: %d AD: 0x%x\n",
-			channel, ad_value);
-
-	return voltage;
-}
-EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert);
-
-/**
- * ab8500_gpadc_read_raw() - gpadc read
- * @channel:	analog channel to be read
- * @avg_sample:  number of ADC sample to average
- * @trig_edge:  selected trig edge
- * @trig_timer: selected ADC trigger delay timer
- * @conv_type: selected conversion type (HW or SW conversion)
- *
- * This function obtains the raw ADC value for an hardware conversion,
- * this then needs to be converted by calling ab8500_gpadc_ad_to_voltage()
- */
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
-{
-	return ab8500_gpadc_double_read_raw(gpadc, channel, avg_sample,
-					    trig_edge, trig_timer, conv_type,
-					    NULL);
-}
-
-int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
-		int *ibat)
-{
-	int ret;
-	int looplimit = 0;
-	unsigned long completion_timeout;
-	u8 val, low_data, high_data, low_data2, high_data2;
-	u8 val_reg1 = 0;
-	unsigned int delay_min = 0;
-	unsigned int delay_max = 0;
-	u8 data_low_addr, data_high_addr;
-
-	if (!gpadc)
-		return -ENODEV;
-
-	/* check if convertion is supported */
-	if ((gpadc->irq_sw < 0) && (conv_type == ADC_SW))
-		return -ENOTSUPP;
-	if ((gpadc->irq_hw < 0) && (conv_type == ADC_HW))
-		return -ENOTSUPP;
-
-	mutex_lock(&gpadc->ab8500_gpadc_lock);
-	/* Enable VTVout LDO this is required for GPADC */
-	pm_runtime_get_sync(gpadc->dev);
-
-	/* Check if ADC is not busy, lock and proceed */
-	do {
-		ret = abx500_get_register_interruptible(gpadc->dev,
-			AB8500_GPADC, AB8500_GPADC_STAT_REG, &val);
-		if (ret < 0)
-			goto out;
-		if (!(val & GPADC_BUSY))
-			break;
-		msleep(20);
-	} while (++looplimit < 10);
-	if (looplimit >= 10 && (val & GPADC_BUSY)) {
-		dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* Enable GPADC */
-	val_reg1 |= EN_GPADC;
-
-	/* Select the channel source and set average samples */
-	switch (avg_sample) {
-	case SAMPLE_1:
-		val = channel | AVG_1;
-		break;
-	case SAMPLE_4:
-		val = channel | AVG_4;
-		break;
-	case SAMPLE_8:
-		val = channel | AVG_8;
-		break;
-	default:
-		val = channel | AVG_16;
-		break;
-	}
-
-	if (conv_type == ADC_HW) {
-		ret = abx500_set_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val);
-		val_reg1 |= EN_TRIG_EDGE;
-		if (trig_edge)
-			val_reg1 |= EN_FALLING;
-	} else
-		ret = abx500_set_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
-	if (ret < 0) {
-		dev_err(gpadc->dev,
-			"gpadc_conversion: set avg samples failed\n");
-		goto out;
-	}
-
-	/*
-	 * Enable ADC, buffering, select rising edge and enable ADC path
-	 * charging current sense if it needed, ABB 3.0 needs some special
-	 * treatment too.
-	 */
-	switch (channel) {
-	case MAIN_CHARGER_C:
-	case USB_CHARGER_C:
-		val_reg1 |= EN_BUF | EN_ICHAR;
-		break;
-	case BTEMP_BALL:
-		if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
-			val_reg1 |= EN_BUF | BTEMP_PULL_UP;
-			/*
-			* Delay might be needed for ABB8500 cut 3.0, if not,
-			* remove when hardware will be availible
-			*/
-			delay_min = 1000; /* Delay in micro seconds */
-			delay_max = 10000; /* large range optimises sleepmode */
-			break;
-		}
-		/* Intentional fallthrough */
-	default:
-		val_reg1 |= EN_BUF;
-		break;
-	}
-
-	/* Write configuration to register */
-	ret = abx500_set_register_interruptible(gpadc->dev,
-		AB8500_GPADC, AB8500_GPADC_CTRL1_REG, val_reg1);
-	if (ret < 0) {
-		dev_err(gpadc->dev,
-			"gpadc_conversion: set Control register failed\n");
-		goto out;
-	}
-
-	if (delay_min != 0)
-		usleep_range(delay_min, delay_max);
-
-	if (conv_type == ADC_HW) {
-		/* Set trigger delay timer */
-		ret = abx500_set_register_interruptible(gpadc->dev,
-			AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"gpadc_conversion: trig timer failed\n");
-			goto out;
-		}
-		completion_timeout = 2 * HZ;
-		data_low_addr = AB8500_GPADC_AUTODATAL_REG;
-		data_high_addr = AB8500_GPADC_AUTODATAH_REG;
-	} else {
-		/* Start SW conversion */
-		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
-			AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
-			ADC_SW_CONV, ADC_SW_CONV);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"gpadc_conversion: start s/w conv failed\n");
-			goto out;
-		}
-		completion_timeout = msecs_to_jiffies(CONVERSION_TIME);
-		data_low_addr = AB8500_GPADC_MANDATAL_REG;
-		data_high_addr = AB8500_GPADC_MANDATAH_REG;
-	}
-
-	/* wait for completion of conversion */
-	if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
-			completion_timeout)) {
-		dev_err(gpadc->dev,
-			"timeout didn't receive GPADC conv interrupt\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* Read the converted RAW data */
-	ret = abx500_get_register_interruptible(gpadc->dev,
-			AB8500_GPADC, data_low_addr, &low_data);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n");
-		goto out;
-	}
-
-	ret = abx500_get_register_interruptible(gpadc->dev,
-		AB8500_GPADC, data_high_addr, &high_data);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "gpadc_conversion: read high data failed\n");
-		goto out;
-	}
-
-	/* Check if double convertion is required */
-	if ((channel == BAT_CTRL_AND_IBAT) ||
-			(channel == VBAT_MEAS_AND_IBAT) ||
-			(channel == VBAT_TRUE_MEAS_AND_IBAT) ||
-			(channel == BAT_TEMP_AND_IBAT)) {
-
-		if (conv_type == ADC_HW) {
-			/* not supported */
-			ret = -ENOTSUPP;
-			dev_err(gpadc->dev,
-				"gpadc_conversion: only SW double conversion supported\n");
-			goto out;
-		} else {
-			/* Read the converted RAW data 2 */
-			ret = abx500_get_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG,
-				&low_data2);
-			if (ret < 0) {
-				dev_err(gpadc->dev,
-					"gpadc_conversion: read sw low data 2 failed\n");
-				goto out;
-			}
-
-			ret = abx500_get_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG,
-				&high_data2);
-			if (ret < 0) {
-				dev_err(gpadc->dev,
-					"gpadc_conversion: read sw high data 2 failed\n");
-				goto out;
-			}
-			if (ibat != NULL) {
-				*ibat = (high_data2 << 8) | low_data2;
-			} else {
-				dev_warn(gpadc->dev,
-					"gpadc_conversion: ibat not stored\n");
-			}
-
-		}
-	}
-
-	/* Disable GPADC */
-	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
-		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
-		goto out;
-	}
-
-	/* Disable VTVout LDO this is required for GPADC */
-	pm_runtime_mark_last_busy(gpadc->dev);
-	pm_runtime_put_autosuspend(gpadc->dev);
-
-	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-
-	return (high_data << 8) | low_data;
-
-out:
-	/*
-	 * It has shown to be needed to turn off the GPADC if an error occurs,
-	 * otherwise we might have problem when waiting for the busy bit in the
-	 * GPADC status register to go low. In V1.1 there wait_for_completion
-	 * seems to timeout when waiting for an interrupt.. Not seen in V2.0
-	 */
-	(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
-		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-	pm_runtime_put(gpadc->dev);
-	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-	dev_err(gpadc->dev,
-		"gpadc_conversion: Failed to AD convert channel %d\n", channel);
-	return ret;
-}
-EXPORT_SYMBOL(ab8500_gpadc_read_raw);
-
-/**
- * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion
- * @irq:	irq number
- * @data:	pointer to the data passed during request irq
- *
- * This is a interrupt service routine for gpadc conversion completion.
- * Notifies the gpadc completion is completed and the converted raw value
- * can be read from the registers.
- * Returns IRQ status(IRQ_HANDLED)
- */
-static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *_gpadc)
-{
-	struct ab8500_gpadc *gpadc = _gpadc;
-
-	complete(&gpadc->ab8500_gpadc_complete);
-
-	return IRQ_HANDLED;
-}
-
-static int otp_cal_regs[] = {
-	AB8500_GPADC_CAL_1,
-	AB8500_GPADC_CAL_2,
-	AB8500_GPADC_CAL_3,
-	AB8500_GPADC_CAL_4,
-	AB8500_GPADC_CAL_5,
-	AB8500_GPADC_CAL_6,
-	AB8500_GPADC_CAL_7,
-};
-
-static int otp4_cal_regs[] = {
-	AB8540_GPADC_OTP4_REG_7,
-	AB8540_GPADC_OTP4_REG_6,
-	AB8540_GPADC_OTP4_REG_5,
-};
-
-static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
-{
-	int i;
-	int ret[ARRAY_SIZE(otp_cal_regs)];
-	u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];
-	int ret_otp4[ARRAY_SIZE(otp4_cal_regs)];
-	u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)];
-	int vmain_high, vmain_low;
-	int btemp_high, btemp_low;
-	int vbat_high, vbat_low;
-	int ibat_high, ibat_low;
-	s64 V_gain, V_offset, V2A_gain, V2A_offset;
-	struct ab8500 *ab8500;
-
-	ab8500 = gpadc->parent;
-
-	/* First we read all OTP registers and store the error code */
-	for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
-		ret[i] = abx500_get_register_interruptible(gpadc->dev,
-			AB8500_OTP_EMUL, otp_cal_regs[i],  &gpadc_cal[i]);
-		if (ret[i] < 0)
-			dev_err(gpadc->dev, "%s: read otp reg 0x%02x failed\n",
-				__func__, otp_cal_regs[i]);
-	}
-
-	/*
-	 * The ADC calibration data is stored in OTP registers.
-	 * The layout of the calibration data is outlined below and a more
-	 * detailed description can be found in UM0836
-	 *
-	 * vm_h/l = vmain_high/low
-	 * bt_h/l = btemp_high/low
-	 * vb_h/l = vbat_high/low
-	 *
-	 * Data bits 8500/9540:
-	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |						   | vm_h9 | vm_h8
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |		   | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 *
-	 * Data bits 8540:
-	 * OTP2
-	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 *
-	 * Data bits 8540:
-	 * OTP4
-	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |					   | ib_h9 | ib_h8 | ib_h7
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 |
-	 *
-	 *
-	 * Ideal output ADC codes corresponding to injected input voltages
-	 * during manufacturing is:
-	 *
-	 * vmain_high: Vin = 19500mV / ADC ideal code = 997
-	 * vmain_low:  Vin = 315mV   / ADC ideal code = 16
-	 * btemp_high: Vin = 1300mV  / ADC ideal code = 985
-	 * btemp_low:  Vin = 21mV    / ADC ideal code = 16
-	 * vbat_high:  Vin = 4700mV  / ADC ideal code = 982
-	 * vbat_low:   Vin = 2380mV  / ADC ideal code = 33
-	 */
-
-	if (is_ab8540(ab8500)) {
-		/* Calculate gain and offset for VMAIN if all reads succeeded*/
-		if (!(ret[1] < 0 || ret[2] < 0)) {
-			vmain_high = (((gpadc_cal[1] & 0xFF) << 2) |
-				((gpadc_cal[2] & 0xC0) >> 6));
-			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
-				(u16)vmain_high;
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
-				(u16)vmain_low;
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
-				(19500 - 315) / (vmain_high - vmain_low);
-			gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
-				19500 - (CALIB_SCALE * (19500 - 315) /
-				(vmain_high - vmain_low)) * vmain_high;
-		} else {
-		gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
-		}
-
-		/* Read IBAT calibration Data */
-		for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) {
-			ret_otp4[i] = abx500_get_register_interruptible(
-					gpadc->dev, AB8500_OTP_EMUL,
-					otp4_cal_regs[i],  &gpadc_otp4[i]);
-			if (ret_otp4[i] < 0)
-				dev_err(gpadc->dev,
-					"%s: read otp4 reg 0x%02x failed\n",
-					__func__, otp4_cal_regs[i]);
-		}
-
-		/* Calculate gain and offset for IBAT if all reads succeeded */
-		if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) {
-			ibat_high = (((gpadc_otp4[0] & 0x07) << 7) |
-				((gpadc_otp4[1] & 0xFE) >> 1));
-			ibat_low = (((gpadc_otp4[1] & 0x01) << 5) |
-				((gpadc_otp4[2] & 0xF8) >> 3));
-
-			gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi =
-				(u16)ibat_high;
-			gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo =
-				(u16)ibat_low;
-
-			V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L)
-				<< CALIB_SHIFT_IBAT) / (ibat_high - ibat_low);
-
-			V_offset = (IBAT_VDROP_H << CALIB_SHIFT_IBAT) -
-				(((IBAT_VDROP_H - IBAT_VDROP_L) <<
-				CALIB_SHIFT_IBAT) / (ibat_high - ibat_low))
-				* ibat_high;
-			/*
-			 * Result obtained is in mV (at a scale factor),
-			 * we need to calculate gain and offset to get mA
-			 */
-			V2A_gain = (ADC_CH_IBAT_MAX - ADC_CH_IBAT_MIN)/
-				(ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
-			V2A_offset = ((ADC_CH_IBAT_MAX_V * ADC_CH_IBAT_MIN -
-				ADC_CH_IBAT_MAX * ADC_CH_IBAT_MIN_V)
-				<< CALIB_SHIFT_IBAT)
-				/ (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
-
-			gpadc->cal_data[ADC_INPUT_IBAT].gain =
-				V_gain * V2A_gain;
-			gpadc->cal_data[ADC_INPUT_IBAT].offset =
-				V_offset * V2A_gain + V2A_offset;
-		} else {
-			gpadc->cal_data[ADC_INPUT_IBAT].gain = 0;
-		}
-
-		dev_dbg(gpadc->dev, "IBAT gain %llu offset %llu\n",
-			gpadc->cal_data[ADC_INPUT_IBAT].gain,
-			gpadc->cal_data[ADC_INPUT_IBAT].offset);
-	} else {
-		/* Calculate gain and offset for VMAIN if all reads succeeded */
-		if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
-			vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
-				((gpadc_cal[1] & 0x3F) << 2) |
-				((gpadc_cal[2] & 0xC0) >> 6));
-			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
-				(u16)vmain_high;
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
-				(u16)vmain_low;
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
-				(19500 - 315) / (vmain_high - vmain_low);
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
-				19500 - (CALIB_SCALE * (19500 - 315) /
-				(vmain_high - vmain_low)) * vmain_high;
-		} else {
-			gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
-		}
-	}
-
-	/* Calculate gain and offset for BTEMP if all reads succeeded */
-	if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) {
-		btemp_high = (((gpadc_cal[2] & 0x01) << 9) |
-			(gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7));
-		btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);
-
-		gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi = (u16)btemp_high;
-		gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo = (u16)btemp_low;
-
-		gpadc->cal_data[ADC_INPUT_BTEMP].gain =
-			CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);
-		gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 -
-			(CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low))
-			* btemp_high;
-	} else {
-		gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0;
-	}
-
-	/* Calculate gain and offset for VBAT if all reads succeeded */
-	if (!(ret[4] < 0 || ret[5] < 0 || ret[6] < 0)) {
-		vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]);
-		vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);
-
-		gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi = (u16)vbat_high;
-		gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo = (u16)vbat_low;
-
-		gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE *
-			(4700 - 2380) /	(vbat_high - vbat_low);
-		gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 -
-			(CALIB_SCALE * (4700 - 2380) /
-			(vbat_high - vbat_low)) * vbat_high;
-	} else {
-		gpadc->cal_data[ADC_INPUT_VBAT].gain = 0;
-	}
-
-	dev_dbg(gpadc->dev, "VMAIN gain %llu offset %llu\n",
-		gpadc->cal_data[ADC_INPUT_VMAIN].gain,
-		gpadc->cal_data[ADC_INPUT_VMAIN].offset);
-
-	dev_dbg(gpadc->dev, "BTEMP gain %llu offset %llu\n",
-		gpadc->cal_data[ADC_INPUT_BTEMP].gain,
-		gpadc->cal_data[ADC_INPUT_BTEMP].offset);
-
-	dev_dbg(gpadc->dev, "VBAT gain %llu offset %llu\n",
-		gpadc->cal_data[ADC_INPUT_VBAT].gain,
-		gpadc->cal_data[ADC_INPUT_VBAT].offset);
-}
-
-#ifdef CONFIG_PM
-static int ab8500_gpadc_runtime_suspend(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-
-	regulator_disable(gpadc->regu);
-	return 0;
-}
-
-static int ab8500_gpadc_runtime_resume(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-	int ret;
-
-	ret = regulator_enable(gpadc->regu);
-	if (ret)
-		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
-	return ret;
-}
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int ab8500_gpadc_suspend(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-
-	mutex_lock(&gpadc->ab8500_gpadc_lock);
-
-	pm_runtime_get_sync(dev);
-
-	regulator_disable(gpadc->regu);
-	return 0;
-}
-
-static int ab8500_gpadc_resume(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-	int ret;
-
-	ret = regulator_enable(gpadc->regu);
-	if (ret)
-		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
-
-	pm_runtime_mark_last_busy(gpadc->dev);
-	pm_runtime_put_autosuspend(gpadc->dev);
-
-	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-	return ret;
-}
-#endif
-
-static int ab8500_gpadc_probe(struct platform_device *pdev)
-{
-	int ret = 0;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = devm_kzalloc(&pdev->dev,
-			     sizeof(struct ab8500_gpadc), GFP_KERNEL);
-	if (!gpadc)
-		return -ENOMEM;
-
-	gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
-	if (gpadc->irq_sw < 0)
-		dev_err(gpadc->dev, "failed to get platform sw_conv_end irq\n");
-
-	gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END");
-	if (gpadc->irq_hw < 0)
-		dev_err(gpadc->dev, "failed to get platform hw_conv_end irq\n");
-
-	gpadc->dev = &pdev->dev;
-	gpadc->parent = dev_get_drvdata(pdev->dev.parent);
-	mutex_init(&gpadc->ab8500_gpadc_lock);
-
-	/* Initialize completion used to notify completion of conversion */
-	init_completion(&gpadc->ab8500_gpadc_complete);
-
-	/* Register interrupts */
-	if (gpadc->irq_sw >= 0) {
-		ret = request_threaded_irq(gpadc->irq_sw, NULL,
-			ab8500_bm_gpadcconvend_handler,
-			IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
-			"ab8500-gpadc-sw",
-			gpadc);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"Failed to register interrupt irq: %d\n",
-				gpadc->irq_sw);
-			goto fail;
-		}
-	}
-
-	if (gpadc->irq_hw >= 0) {
-		ret = request_threaded_irq(gpadc->irq_hw, NULL,
-			ab8500_bm_gpadcconvend_handler,
-			IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
-			"ab8500-gpadc-hw",
-			gpadc);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"Failed to register interrupt irq: %d\n",
-				gpadc->irq_hw);
-			goto fail_irq;
-		}
-	}
-
-	/* VTVout LDO used to power up ab8500-GPADC */
-	gpadc->regu = devm_regulator_get(&pdev->dev, "vddadc");
-	if (IS_ERR(gpadc->regu)) {
-		ret = PTR_ERR(gpadc->regu);
-		dev_err(gpadc->dev, "failed to get vtvout LDO\n");
-		goto fail_irq;
-	}
-
-	platform_set_drvdata(pdev, gpadc);
-
-	ret = regulator_enable(gpadc->regu);
-	if (ret) {
-		dev_err(gpadc->dev, "Failed to enable vtvout LDO: %d\n", ret);
-		goto fail_enable;
-	}
-
-	pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY);
-	pm_runtime_use_autosuspend(gpadc->dev);
-	pm_runtime_set_active(gpadc->dev);
-	pm_runtime_enable(gpadc->dev);
-
-	ab8500_gpadc_read_calibration_data(gpadc);
-	list_add_tail(&gpadc->node, &ab8500_gpadc_list);
-	dev_dbg(gpadc->dev, "probe success\n");
-
-	return 0;
-
-fail_enable:
-fail_irq:
-	free_irq(gpadc->irq_sw, gpadc);
-	free_irq(gpadc->irq_hw, gpadc);
-fail:
-	return ret;
-}
-
-static int ab8500_gpadc_remove(struct platform_device *pdev)
-{
-	struct ab8500_gpadc *gpadc = platform_get_drvdata(pdev);
-
-	/* remove this gpadc entry from the list */
-	list_del(&gpadc->node);
-	/* remove interrupt  - completion of Sw ADC conversion */
-	if (gpadc->irq_sw >= 0)
-		free_irq(gpadc->irq_sw, gpadc);
-	if (gpadc->irq_hw >= 0)
-		free_irq(gpadc->irq_hw, gpadc);
-
-	pm_runtime_get_sync(gpadc->dev);
-	pm_runtime_disable(gpadc->dev);
-
-	regulator_disable(gpadc->regu);
-
-	pm_runtime_set_suspended(gpadc->dev);
-
-	pm_runtime_put_noidle(gpadc->dev);
-
-	return 0;
-}
-
-static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
-	SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
-			   ab8500_gpadc_runtime_resume,
-			   NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend,
-				ab8500_gpadc_resume)
-
-};
-
-static struct platform_driver ab8500_gpadc_driver = {
-	.probe = ab8500_gpadc_probe,
-	.remove = ab8500_gpadc_remove,
-	.driver = {
-		.name = "ab8500-gpadc",
-		.pm = &ab8500_gpadc_pm_ops,
-	},
-};
-
-static int __init ab8500_gpadc_init(void)
-{
-	return platform_driver_register(&ab8500_gpadc_driver);
-}
-subsys_initcall_sync(ab8500_gpadc_init);
-
-/**
- * ab8540_gpadc_get_otp() - returns OTP values
- *
- */
-void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
-			u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
-			u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h)
-{
-	*vmain_l = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo;
-	*vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi;
-	*btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo;
-	*btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi;
-	*vbat_l  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
-	*vbat_h  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
-	*ibat_l  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
-	*ibat_h  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
-}
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index c84a7b1caeb6..27164a1d3c7c 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -629,7 +629,7 @@ config BATTERY_GAUGE_LTC2941
 
 config AB8500_BM
 	bool "AB8500 Battery Management Driver"
-	depends on AB8500_CORE && AB8500_GPADC
+	depends on AB8500_CORE && AB8500_GPADC && (IIO = y)
 	help
 	  Say Y to include support for AB8500 battery management.
 
diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
index 8fe81259bfd9..ad8c51ef8b8b 100644
--- a/drivers/power/supply/ab8500_btemp.c
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -26,7 +26,7 @@
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/iio/consumer.h>
 
 #define VTVOUT_V			1800
 
@@ -79,7 +79,8 @@ struct ab8500_btemp_ranges {
  * @bat_temp:		Dispatched battery temperature in degree Celsius
  * @prev_bat_temp	Last measured battery temperature in degree Celsius
  * @parent:		Pointer to the struct ab8500
- * @gpadc:		Pointer to the struct gpadc
+ * @adc_btemp_ball:	ADC channel for the battery ball temperature
+ * @adc_bat_ctrl:	ADC channel for the battery control
  * @fg:			Pointer to the struct fg
  * @bm:           	Platform specific battery management information
  * @btemp_psy:		Structure for BTEMP specific battery properties
@@ -96,7 +97,8 @@ struct ab8500_btemp {
 	int bat_temp;
 	int prev_bat_temp;
 	struct ab8500 *parent;
-	struct ab8500_gpadc *gpadc;
+	struct iio_channel *btemp_ball;
+	struct iio_channel *bat_ctrl;
 	struct ab8500_fg *fg;
 	struct abx500_bm_data *bm;
 	struct power_supply *btemp_psy;
@@ -177,13 +179,13 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
  */
 static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di)
 {
-	int vbtemp;
+	int vbtemp, ret;
 	static int prev;
 
-	vbtemp = ab8500_gpadc_convert(di->gpadc, BAT_CTRL);
-	if (vbtemp < 0) {
+	ret = iio_read_channel_processed(di->bat_ctrl, &vbtemp);
+	if (ret < 0) {
 		dev_err(di->dev,
-			"%s gpadc conversion failed, using previous value",
+			"%s ADC conversion failed, using previous value",
 			__func__);
 		return prev;
 	}
@@ -455,7 +457,7 @@ static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di,
  */
 static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
 {
-	int temp;
+	int temp, ret;
 	static int prev;
 	int rbat, rntc, vntc;
 	u8 id;
@@ -480,10 +482,10 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
 			di->bm->bat_type[id].r_to_t_tbl,
 			di->bm->bat_type[id].n_temp_tbl_elements, rbat);
 	} else {
-		vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL);
-		if (vntc < 0) {
+		ret = iio_read_channel_processed(di->btemp_ball, &vntc);
+		if (ret < 0) {
 			dev_err(di->dev,
-				"%s gpadc conversion failed,"
+				"%s ADC conversion failed,"
 				" using previous value\n", __func__);
 			return prev;
 		}
@@ -1024,7 +1026,22 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 	/* get parent data */
 	di->dev = &pdev->dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
-	di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+	/* Get ADC channels */
+	di->btemp_ball = devm_iio_channel_get(&pdev->dev, "btemp_ball");
+	if (IS_ERR(di->btemp_ball)) {
+		if (PTR_ERR(di->btemp_ball) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get BTEMP BALL ADC channel\n");
+		return PTR_ERR(di->btemp_ball);
+	}
+	di->bat_ctrl = devm_iio_channel_get(&pdev->dev, "bat_ctrl");
+	if (IS_ERR(di->bat_ctrl)) {
+		if (PTR_ERR(di->bat_ctrl) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get BAT CTRL ADC channel\n");
+		return PTR_ERR(di->bat_ctrl);
+	}
 
 	di->initialized = false;
 
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index e51d0e72beea..c053ede47eb2 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -29,10 +29,10 @@
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
 #include <linux/mfd/abx500/ux500_chargalg.h>
 #include <linux/usb/otg.h>
 #include <linux/mutex.h>
+#include <linux/iio/consumer.h>
 
 /* Charger constants */
 #define NO_PW_CONN			0
@@ -233,7 +233,10 @@ struct ab8500_charger_max_usb_in_curr {
  * @current_stepping_sessions:
  *			Counter for current stepping sessions
  * @parent:		Pointer to the struct ab8500
- * @gpadc:		Pointer to the struct gpadc
+ * @adc_main_charger_v	ADC channel for main charger voltage
+ * @adc_main_charger_c	ADC channel for main charger current
+ * @adc_vbus_v		ADC channel for USB charger voltage
+ * @adc_usb_charger_c	ADC channel for USB charger current
  * @bm:           	Platform specific battery management information
  * @flags:		Structure for information about events triggered
  * @usb_state:		Structure for usb stack information
@@ -283,7 +286,10 @@ struct ab8500_charger {
 	int is_aca_rid;
 	atomic_t current_stepping_sessions;
 	struct ab8500 *parent;
-	struct ab8500_gpadc *gpadc;
+	struct iio_channel *adc_main_charger_v;
+	struct iio_channel *adc_main_charger_c;
+	struct iio_channel *adc_vbus_v;
+	struct iio_channel *adc_usb_charger_c;
 	struct abx500_bm_data *bm;
 	struct ab8500_charger_event_flags flags;
 	struct ab8500_charger_usb_state usb_state;
@@ -459,13 +465,13 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
  */
 static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di)
 {
-	int vch;
+	int vch, ret;
 
 	/* Only measure voltage if the charger is connected */
 	if (di->ac.charger_connected) {
-		vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V);
-		if (vch < 0)
-			dev_err(di->dev, "%s gpadc conv failed,\n", __func__);
+		ret = iio_read_channel_processed(di->adc_main_charger_v, &vch);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		vch = 0;
 	}
@@ -510,13 +516,13 @@ static int ab8500_charger_ac_cv(struct ab8500_charger *di)
  */
 static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
 {
-	int vch;
+	int vch, ret;
 
 	/* Only measure voltage if the charger is connected */
 	if (di->usb.charger_connected) {
-		vch = ab8500_gpadc_convert(di->gpadc, VBUS_V);
-		if (vch < 0)
-			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+		ret = iio_read_channel_processed(di->adc_vbus_v, &vch);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		vch = 0;
 	}
@@ -532,13 +538,13 @@ static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
  */
 static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
 {
-	int ich;
+	int ich, ret;
 
 	/* Only measure current if the charger is online */
 	if (di->usb.charger_online) {
-		ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C);
-		if (ich < 0)
-			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+		ret = iio_read_channel_processed(di->adc_usb_charger_c, &ich);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		ich = 0;
 	}
@@ -554,13 +560,13 @@ static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
  */
 static int ab8500_charger_get_ac_current(struct ab8500_charger *di)
 {
-	int ich;
+	int ich, ret;
 
 	/* Only measure current if the charger is online */
 	if (di->ac.charger_online) {
-		ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C);
-		if (ich < 0)
-			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+		ret = iio_read_channel_processed(di->adc_main_charger_c, &ich);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		ich = 0;
 	}
@@ -3371,7 +3377,39 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	/* get parent data */
 	di->dev = &pdev->dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
-	di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+	/* Get ADC channels */
+	di->adc_main_charger_v = devm_iio_channel_get(&pdev->dev,
+						      "main_charger_v");
+	if (IS_ERR(di->adc_main_charger_v)) {
+		if (PTR_ERR(di->adc_main_charger_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC main charger voltage\n");
+		return PTR_ERR(di->adc_main_charger_v);
+	}
+	di->adc_main_charger_c = devm_iio_channel_get(&pdev->dev,
+						      "main_charger_c");
+	if (IS_ERR(di->adc_main_charger_c)) {
+		if (PTR_ERR(di->adc_main_charger_c) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC main charger current\n");
+		return PTR_ERR(di->adc_main_charger_v);
+	}
+	di->adc_vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v");
+	if (IS_ERR(di->adc_vbus_v)) {
+		if (PTR_ERR(di->adc_vbus_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC USB charger voltage\n");
+		return PTR_ERR(di->adc_vbus_v);
+	}
+	di->adc_usb_charger_c = devm_iio_channel_get(&pdev->dev,
+						     "usb_charger_c");
+	if (IS_ERR(di->adc_usb_charger_c)) {
+		if (PTR_ERR(di->adc_usb_charger_c) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC USB charger current\n");
+		return PTR_ERR(di->adc_usb_charger_c);
+	}
 
 	/* initialize lock */
 	spin_lock_init(&di->usb_state.usb_lock);
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 6fc4bc30644c..f7909dfd3b61 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -32,7 +32,7 @@
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/iio/consumer.h>
 #include <linux/kernel.h>
 
 #define MILLI_TO_MICRO			1000
@@ -182,7 +182,7 @@ struct inst_curr_result_list {
  * @bat_cap:		Structure for battery capacity specific parameters
  * @avg_cap:		Average capacity filter
  * @parent:		Pointer to the struct ab8500
- * @gpadc:		Pointer to the struct gpadc
+ * @main_bat_v:		ADC channel for the main battery voltage
  * @bm:           	Platform specific battery management information
  * @fg_psy:		Structure that holds the FG specific battery properties
  * @fg_wq:		Work queue for running the FG algorithm
@@ -224,7 +224,7 @@ struct ab8500_fg {
 	struct ab8500_fg_battery_capacity bat_cap;
 	struct ab8500_fg_avg_cap avg_cap;
 	struct ab8500 *parent;
-	struct ab8500_gpadc *gpadc;
+	struct iio_channel *main_bat_v;
 	struct abx500_bm_data *bm;
 	struct power_supply *fg_psy;
 	struct workqueue_struct *fg_wq;
@@ -829,13 +829,13 @@ exit:
  */
 static int ab8500_fg_bat_voltage(struct ab8500_fg *di)
 {
-	int vbat;
+	int vbat, ret;
 	static int prev;
 
-	vbat = ab8500_gpadc_convert(di->gpadc, MAIN_BAT_V);
-	if (vbat < 0) {
+	ret = iio_read_channel_processed(di->main_bat_v, &vbat);
+	if (ret < 0) {
 		dev_err(di->dev,
-			"%s gpadc conversion failed, using previous value\n",
+			"%s ADC conversion failed, using previous value\n",
 			__func__);
 		return prev;
 	}
@@ -3066,7 +3066,14 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	/* get parent data */
 	di->dev = &pdev->dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
-	di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+	di->main_bat_v = devm_iio_channel_get(&pdev->dev, "main_bat_v");
+	if (IS_ERR(di->main_bat_v)) {
+		if (PTR_ERR(di->main_bat_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get main battery ADC channel\n");
+		return PTR_ERR(di->main_bat_v);
+	}
 
 	psy_cfg.supplied_to = supply_interface;
 	psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index e3a2518503ed..bd21655c37a6 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -508,15 +508,6 @@ config  PWM_TIEHRPWM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-tiehrpwm.
 
-config  PWM_TIPWMSS
-	bool
-	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM)
-	help
-	  PWM Subsystem driver support for AM33xx SOC.
-
-	  PWM submodules require PWM config space access from submodule
-	  drivers and require common parent driver support.
-
 config PWM_TWL
 	tristate "TWL4030/6030 PWM support"
 	depends on TWL4030_CORE
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 26326adf71d7..9a475073dafc 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -50,7 +50,6 @@ obj-$(CONFIG_PWM_SUN4I)		+= pwm-sun4i.o
 obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
 obj-$(CONFIG_PWM_TIECAP)	+= pwm-tiecap.o
 obj-$(CONFIG_PWM_TIEHRPWM)	+= pwm-tiehrpwm.o
-obj-$(CONFIG_PWM_TIPWMSS)	+= pwm-tipwmss.o
 obj-$(CONFIG_PWM_TWL)		+= pwm-twl.o
 obj-$(CONFIG_PWM_TWL_LED)	+= pwm-twl-led.o
 obj-$(CONFIG_PWM_VT8500)	+= pwm-vt8500.o
diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index 038d6732c3fd..23026978a5a5 100644
--- a/drivers/staging/iio/frequency/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -417,6 +417,10 @@ static int ad9834_probe(struct spi_device *spi)
 	st = iio_priv(indio_dev);
 	mutex_init(&st->lock);
 	st->mclk = devm_clk_get(&spi->dev, NULL);
+	if (IS_ERR(st->mclk)) {
+		ret = PTR_ERR(st->mclk);
+		goto error_disable_reg;
+	}
 
 	ret = clk_prepare_enable(st->mclk);
 	if (ret) {