Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
 "Another merge window, another pull full of stuff:

   1) Support alternative names for network devices, from Jiri Pirko.

   2) Introduce per-netns netdev notifiers, also from Jiri Pirko.

   3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
      Larsen.

   4) Allow compiling out the TLS TOE code, from Jakub Kicinski.

   5) Add several new tracepoints to the kTLS code, also from Jakub.

   6) Support set channels ethtool callback in ena driver, from Sameeh
      Jubran.

   7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
      SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.

   8) Add XDP support to mvneta driver, from Lorenzo Bianconi.

   9) Lots of netfilter hw offload fixes, cleanups and enhancements,
      from Pablo Neira Ayuso.

  10) PTP support for aquantia chips, from Egor Pomozov.

  11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
      Josh Hunt.

  12) Add smart nagle to tipc, from Jon Maloy.

  13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
      Duvvuru.

  14) Add a flow mask cache to OVS, from Tonghao Zhang.

  15) Add XDP support to ice driver, from Maciej Fijalkowski.

  16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.

  17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.

  18) Support it in stmmac driver too, from Jose Abreu.

  19) Support TIPC encryption and auth, from Tuong Lien.

  20) Introduce BPF trampolines, from Alexei Starovoitov.

  21) Make page_pool API more numa friendly, from Saeed Mahameed.

  22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.

  23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
  libbpf: Fix usage of u32 in userspace code
  mm: Implement no-MMU variant of vmalloc_user_node_flags
  slip: Fix use-after-free Read in slip_open
  net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
  macvlan: schedule bc_work even if error
  enetc: add support Credit Based Shaper(CBS) for hardware offload
  net: phy: add helpers phy_(un)lock_mdio_bus
  mdio_bus: don't use managed reset-controller
  ax88179_178a: add ethtool_op_get_ts_info()
  mlxsw: spectrum_router: Fix use of uninitialized adjacency index
  mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
  bpf: Simplify __bpf_arch_text_poke poke type handling
  bpf: Introduce BPF_TRACE_x helper for the tracing tests
  bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
  bpf, testing: Add various tail call test cases
  bpf, x86: Emit patchable direct jump as tail call
  bpf: Constant map key tracking for prog array pokes
  bpf: Add poke dependency tracking for prog array maps
  bpf: Add initial poke descriptor table for jit images
  bpf: Move owner type, jited info into array auxiliary data
  ...

1 files changed, 33 insertions, 30 deletions

diff --git a/include/linux/dim.h b/include/linux/dim.h
index 9fa4b3f88c39..b698266d0035 100644
--- a/include/linux/dim.h
+++ b/include/linux/dim.h
@@ -4,22 +4,26 @@
 #ifndef DIM_H
 #define DIM_H
 
+#include <linux/bits.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
 
-/**
+/*
  * Number of events between DIM iterations.
  * Causes a moderation of the algorithm run.
  */
 #define DIM_NEVENTS 64
 
-/**
+/*
  * Is a difference between values justifies taking an action.
  * We consider 10% difference as significant.
  */
 #define IS_SIGNIFICANT_DIFF(val, ref) \
 	(((100UL * abs((val) - (ref))) / (ref)) > 10)
 
-/**
+/*
  * Calculate the gap between two values.
  * Take wrap-around and variable size into consideration.
  */
@@ -27,12 +31,13 @@
 		& (BIT_ULL(bits) - 1))
 
 /**
- * Structure for CQ moderation values.
+ * struct dim_cq_moder - Structure for CQ moderation values.
  * Used for communications between DIM and its consumer.
  *
  * @usec: CQ timer suggestion (by DIM)
  * @pkts: CQ packet counter suggestion (by DIM)
- * @cq_period_mode: CQ priod count mode (from CQE/EQE)
+ * @comps: Completion counter
+ * @cq_period_mode: CQ period count mode (from CQE/EQE)
  */
 struct dim_cq_moder {
 	u16 usec;
@@ -42,13 +47,14 @@ struct dim_cq_moder {
 };
 
 /**
- * Structure for DIM sample data.
+ * struct dim_sample - Structure for DIM sample data.
  * Used for communications between DIM and its consumer.
  *
  * @time: Sample timestamp
  * @pkt_ctr: Number of packets
  * @byte_ctr: Number of bytes
  * @event_ctr: Number of events
+ * @comp_ctr: Current completion counter
  */
 struct dim_sample {
 	ktime_t time;
@@ -59,12 +65,14 @@ struct dim_sample {
 };
 
 /**
- * Structure for DIM stats.
+ * struct dim_stats - Structure for DIM stats.
  * Used for holding current measured rates.
  *
  * @ppms: Packets per msec
  * @bpms: Bytes per msec
  * @epms: Events per msec
+ * @cpms: Completions per msec
+ * @cpe_ratio: Ratio of completions to events
  */
 struct dim_stats {
 	int ppms; /* packets per msec */
@@ -75,12 +83,13 @@ struct dim_stats {
 };
 
 /**
- * Main structure for dynamic interrupt moderation (DIM).
+ * struct dim - Main structure for dynamic interrupt moderation (DIM).
  * Used for holding all information about a specific DIM instance.
  *
  * @state: Algorithm state (see below)
  * @prev_stats: Measured rates from previous iteration (for comparison)
  * @start_sample: Sampled data at start of current iteration
+ * @measuring_sample: A &dim_sample that is used to update the current events
  * @work: Work to perform on action required
  * @priv: A pointer to the struct that points to dim
  * @profile_ix: Current moderation profile
@@ -106,24 +115,21 @@ struct dim {
 };
 
 /**
- * enum dim_cq_period_mode
- *
- * These are the modes for CQ period count.
+ * enum dim_cq_period_mode - Modes for CQ period count
  *
  * @DIM_CQ_PERIOD_MODE_START_FROM_EQE: Start counting from EQE
  * @DIM_CQ_PERIOD_MODE_START_FROM_CQE: Start counting from CQE (implies timer reset)
  * @DIM_CQ_PERIOD_NUM_MODES: Number of modes
  */
-enum {
+enum dim_cq_period_mode {
 	DIM_CQ_PERIOD_MODE_START_FROM_EQE = 0x0,
 	DIM_CQ_PERIOD_MODE_START_FROM_CQE = 0x1,
 	DIM_CQ_PERIOD_NUM_MODES
 };
 
 /**
- * enum dim_state
+ * enum dim_state - DIM algorithm states
  *
- * These are the DIM algorithm states.
  * These will determine if the algorithm is in a valid state to start an iteration.
  *
  * @DIM_START_MEASURE: This is the first iteration (also after applying a new profile)
@@ -131,16 +137,15 @@ enum {
  * need to perform an action
  * @DIM_APPLY_NEW_PROFILE: DIM consumer is currently applying a profile - no need to measure
  */
-enum {
+enum dim_state {
 	DIM_START_MEASURE,
 	DIM_MEASURE_IN_PROGRESS,
 	DIM_APPLY_NEW_PROFILE,
 };
 
 /**
- * enum dim_tune_state
+ * enum dim_tune_state - DIM algorithm tune states
  *
- * These are the DIM algorithm tune states.
  * These will determine which action the algorithm should perform.
  *
  * @DIM_PARKING_ON_TOP: Algorithm found a local top point - exit on significant difference
@@ -148,7 +153,7 @@ enum {
  * @DIM_GOING_RIGHT: Algorithm is currently trying higher moderation levels
  * @DIM_GOING_LEFT: Algorithm is currently trying lower moderation levels
  */
-enum {
+enum dim_tune_state {
 	DIM_PARKING_ON_TOP,
 	DIM_PARKING_TIRED,
 	DIM_GOING_RIGHT,
@@ -156,25 +161,23 @@ enum {
 };
 
 /**
- * enum dim_stats_state
+ * enum dim_stats_state - DIM algorithm statistics states
  *
- * These are the DIM algorithm statistics states.
  * These will determine the verdict of current iteration.
  *
  * @DIM_STATS_WORSE: Current iteration shows worse performance than before
- * @DIM_STATS_WORSE: Current iteration shows same performance than before
- * @DIM_STATS_WORSE: Current iteration shows better performance than before
+ * @DIM_STATS_SAME:  Current iteration shows same performance than before
+ * @DIM_STATS_BETTER: Current iteration shows better performance than before
  */
-enum {
+enum dim_stats_state {
 	DIM_STATS_WORSE,
 	DIM_STATS_SAME,
 	DIM_STATS_BETTER,
 };
 
 /**
- * enum dim_step_result
+ * enum dim_step_result - DIM algorithm step results
  *
- * These are the DIM algorithm step results.
  * These describe the result of a step.
  *
  * @DIM_STEPPED: Performed a regular step
@@ -182,7 +185,7 @@ enum {
  * tired parking
  * @DIM_ON_EDGE: Stepped to the most left/right profile
  */
-enum {
+enum dim_step_result {
 	DIM_STEPPED,
 	DIM_TOO_TIRED,
 	DIM_ON_EDGE,
@@ -199,7 +202,7 @@ enum {
 bool dim_on_top(struct dim *dim);
 
 /**
- *	dim_turn - change profile alterning direction
+ *	dim_turn - change profile altering direction
  *	@dim: DIM context
  *
  * Go left if we were going right and vice-versa.
@@ -238,7 +241,7 @@ void dim_calc_stats(struct dim_sample *start, struct dim_sample *end,
 		    struct dim_stats *curr_stats);
 
 /**
- *	dim_update_sample - set a sample's fields with give values
+ *	dim_update_sample - set a sample's fields with given values
  *	@event_ctr: number of events to set
  *	@packets: number of packets to set
  *	@bytes: number of bytes to set
@@ -304,8 +307,8 @@ struct dim_cq_moder net_dim_get_def_tx_moderation(u8 cq_period_mode);
  *	@end_sample: Current data measurement
  *
  * Called by the consumer.
- * This is the main logic of the algorithm, where data is processed in order to decide on next
- * required action.
+ * This is the main logic of the algorithm, where data is processed in order
+ * to decide on next required action.
  */
 void net_dim(struct dim *dim, struct dim_sample end_sample);