Merge tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Lots of changes (slightly more code increase than usual) at this time,
  while most of code changes are ASoC driver-specific.

  Here are some highlights:

  Core:

   - The new auxiliary bus implementation for Intel DSP, which will be
     used by other drivers as well

   - Lots of ASoC core cleanups and refactoring

   - UBSAN and KCSAN fixes in rawmidi, sequencer and a few others

   - Compress-offload API enhancement for the pause during draining

  HD- and USB-audio:

   - Enhancements of the USB-audio implicit feedback support, including
     better full-duplex operations

   - Continued CA0132 improvements and fixes

   - A few new quirk entries, HDMI audio fixes

  ASoC:

   - Support for boot time selection of Intel DSP firmware, which should
     help distros/users testing new stuff more easily; the kconfig was
     moved to boot time option, too

   - Some basic DPCM support in audio graph card

   - Removal of old pre-DT Freescale drivers

   - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
     Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
     RT715, Qualcomm SM8250 and simple GPIO based muxes"

* tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits)
  ALSA: pcm: oss: Fix potential out-of-bounds shift
  ALSA: usb-audio: Fix potential out-of-bounds shift
  ALSA: hda/ca0132 - Add ZxR surround DAC setup.
  ALSA: hda/ca0132 - Add 8051 PLL write helper functions.
  ALSA: hda/hdmi: packet buffer index must be set before reading value
  ASoC: SOF: imx: update kernel-doc description
  ASoC: mediatek: mt8183: delete some unreachable code
  ASoC: mediatek: mt8183: add PM ops to machine drivers
  ASoC: topology: Fix wrong size check
  ASoC: topology: Add missing size check
  ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err
  ASoC: SOF: modify the SOF_DBG flags
  ASoC: SOF: Intel: hda: remove duplicated status dump
  ASoC: rt1015p: delay 300ms after SDB pulling high for calibration
  ASoC: rt1015p: move SDB control from trigger to DAPM
  ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()
  ALSA: usb-audio: Fix control 'access overflow' errors from chmap
  ALSA: hda/hdmi: always print pin NIDs as hexadecimal
  ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button
  ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions.
  ...

4 files changed, 71 insertions, 44 deletions

diff --git a/include/linux/platform_data/adau1977.h b/include/linux/platform_data/adau1977.h
deleted file mode 100644
index 86667235077a..000000000000
--- a/include/linux/platform_data/adau1977.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * ADAU1977/ADAU1978/ADAU1979 driver
- *
- * Copyright 2014 Analog Devices Inc.
- *  Author: Lars-Peter Clausen <lars@metafoo.de>
- */
-
-#ifndef __LINUX_PLATFORM_DATA_ADAU1977_H__
-#define __LINUX_PLATFORM_DATA_ADAU1977_H__
-
-/**
- * enum adau1977_micbias - ADAU1977 MICBIAS pin voltage setting
- * @ADAU1977_MICBIAS_5V0: MICBIAS is set to 5.0 V
- * @ADAU1977_MICBIAS_5V5: MICBIAS is set to 5.5 V
- * @ADAU1977_MICBIAS_6V0: MICBIAS is set to 6.0 V
- * @ADAU1977_MICBIAS_6V5: MICBIAS is set to 6.5 V
- * @ADAU1977_MICBIAS_7V0: MICBIAS is set to 7.0 V
- * @ADAU1977_MICBIAS_7V5: MICBIAS is set to 7.5 V
- * @ADAU1977_MICBIAS_8V0: MICBIAS is set to 8.0 V
- * @ADAU1977_MICBIAS_8V5: MICBIAS is set to 8.5 V
- * @ADAU1977_MICBIAS_9V0: MICBIAS is set to 9.0 V
- */
-enum adau1977_micbias {
-	ADAU1977_MICBIAS_5V0 = 0x0,
-	ADAU1977_MICBIAS_5V5 = 0x1,
-	ADAU1977_MICBIAS_6V0 = 0x2,
-	ADAU1977_MICBIAS_6V5 = 0x3,
-	ADAU1977_MICBIAS_7V0 = 0x4,
-	ADAU1977_MICBIAS_7V5 = 0x5,
-	ADAU1977_MICBIAS_8V0 = 0x6,
-	ADAU1977_MICBIAS_8V5 = 0x7,
-	ADAU1977_MICBIAS_9V0 = 0x8,
-};
-
-/**
- * struct adau1977_platform_data - Platform configuration data for the ADAU1977
- * @micbias: Specifies the voltage for the MICBIAS pin
- */
-struct adau1977_platform_data {
-	enum adau1977_micbias micbias;
-};
-
-#endif
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index e7834d98207f..a652d1474d6a 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -570,6 +570,10 @@ struct regmap *__regmap_init_sdw(struct sdw_slave *sdw,
 				 const struct regmap_config *config,
 				 struct lock_class_key *lock_key,
 				 const char *lock_name);
+struct regmap *__regmap_init_sdw_mbq(struct sdw_slave *sdw,
+				     const struct regmap_config *config,
+				     struct lock_class_key *lock_key,
+				     const char *lock_name);
 struct regmap *__regmap_init_spi_avmm(struct spi_device *spi,
 				      const struct regmap_config *config,
 				      struct lock_class_key *lock_key,
@@ -619,6 +623,10 @@ struct regmap *__devm_regmap_init_sdw(struct sdw_slave *sdw,
 				 const struct regmap_config *config,
 				 struct lock_class_key *lock_key,
 				 const char *lock_name);
+struct regmap *__devm_regmap_init_sdw_mbq(struct sdw_slave *sdw,
+					  const struct regmap_config *config,
+					  struct lock_class_key *lock_key,
+					  const char *lock_name);
 struct regmap *__devm_regmap_init_slimbus(struct slim_device *slimbus,
 				 const struct regmap_config *config,
 				 struct lock_class_key *lock_key,
@@ -818,6 +826,19 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
 				sdw, config)
 
 /**
+ * regmap_init_sdw_mbq() - Initialise register map
+ *
+ * @sdw: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_sdw_mbq(sdw, config)					\
+	__regmap_lockdep_wrapper(__regmap_init_sdw_mbq, #config,		\
+				sdw, config)
+
+/**
  * regmap_init_spi_avmm() - Initialize register map for Intel SPI Slave
  * to AVMM Bus Bridge
  *
@@ -990,6 +1011,20 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
 				sdw, config)
 
 /**
+ * devm_regmap_init_sdw_mbq() - Initialise managed register map
+ *
+ * @sdw: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_sdw_mbq(sdw, config)			\
+	__regmap_lockdep_wrapper(__devm_regmap_init_sdw_mbq, #config,   \
+				sdw, config)
+
+/**
  * devm_regmap_init_slimbus() - Initialise managed register map
  *
  * @slimbus: Device that will be interacted with
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 41cc1192f9aa..f0b01b728640 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -359,6 +359,7 @@ struct sdw_dpn_prop {
  * @sink_dpn_prop: Sink Data Port N properties
  * @scp_int1_mask: SCP_INT1_MASK desired settings
  * @quirks: bitmask identifying deltas from the MIPI specification
+ * @is_sdca: the Slave supports the SDCA specification
  */
 struct sdw_slave_prop {
 	u32 mipi_revision;
@@ -382,6 +383,7 @@ struct sdw_slave_prop {
 	struct sdw_dpn_prop *sink_dpn_prop;
 	u8 scp_int1_mask;
 	u32 quirks;
+	bool is_sdca;
 };
 
 #define SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY	BIT(0)
@@ -479,10 +481,12 @@ struct sdw_slave_id {
 
 /**
  * struct sdw_slave_intr_status - Slave interrupt status
+ * @sdca_cascade: set if the Slave device reports an SDCA interrupt
  * @control_port: control port status
  * @port: data port status
  */
 struct sdw_slave_intr_status {
+	bool sdca_cascade;
 	u8 control_port;
 	u8 port[15];
 };
diff --git a/include/linux/soundwire/sdw_registers.h b/include/linux/soundwire/sdw_registers.h
index f420e8059779..e14dff9a9c7f 100644
--- a/include/linux/soundwire/sdw_registers.h
+++ b/include/linux/soundwire/sdw_registers.h
@@ -298,4 +298,36 @@
 #define SDW_CASC_PORT_MASK_INTSTAT3		1
 #define SDW_CASC_PORT_REG_OFFSET_INTSTAT3	2
 
+/*
+ * v1.2 device - SDCA address mapping
+ *
+ * Spec definition
+ *	Bits		Contents
+ *	31		0 (required by addressing range)
+ *	30:26		0b10000 (Control Prefix)
+ *	25		0 (Reserved)
+ *	24:22		Function Number [2:0]
+ *	21		Entity[6]
+ *	20:19		Control Selector[5:4]
+ *	18		0 (Reserved)
+ *	17:15		Control Number[5:3]
+ *	14		Next
+ *	13		MBQ
+ *	12:7		Entity[5:0]
+ *	6:3		Control Selector[3:0]
+ *	2:0		Control Number[2:0]
+ */
+
+#define SDW_SDCA_CTL(fun, ent, ctl, ch)		(BIT(30) |			\
+						 (((fun) & 0x7) << 22) |	\
+						 (((ent) & 0x40) << 15) |	\
+						 (((ent) & 0x3f) << 7) |	\
+						 (((ctl) & 0x30) << 15) |	\
+						 (((ctl) & 0x0f) << 3) |	\
+						 (((ch) & 0x38) << 12) |	\
+						 ((ch) & 0x07))
+
+#define SDW_SDCA_MBQ_CTL(reg)			((reg) | BIT(13))
+#define SDW_SDCA_NEXT_CTL(reg)			((reg) | BIT(14))
+
 #endif /* __SDW_REGISTERS_H */