Merge tag 'wireless-next-2023-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.8

The third "new features" pull request for v6.8. This is a smaller one
to clear up our tree before the break and nothing really noteworthy
this time.

Major changes:

stack

* cfg80211: introduce cfg80211_ssid_eq() for SSID matching

* cfg80211: support P2P operation on DFS channels

* mac80211: allow 64-bit radiotap timestamps

iwlwifi

* AX210: allow concurrent P2P operation on DFS channels
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 91 insertions, 23 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 52808dd22513..83c4d060a559 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2720,6 +2720,7 @@ static inline bool ieee80211_he_capa_size_ok(const u8 *data, u8 len)
 
 #define IEEE80211_6GHZ_CTRL_REG_LPI_AP	0
 #define IEEE80211_6GHZ_CTRL_REG_SP_AP	1
+#define IEEE80211_6GHZ_CTRL_REG_VLP_AP	2
 
 /**
  * struct ieee80211_he_6ghz_oper - HE 6 GHz operation Information field
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index ac1fb326dcda..cf79656ce09c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -117,6 +117,11 @@ struct wiphy;
  *	This may be due to the driver or due to regulatory bandwidth
  *	restrictions.
  * @IEEE80211_CHAN_NO_EHT: EHT operation is not permitted on this channel.
+ * @IEEE80211_CHAN_DFS_CONCURRENT: See %NL80211_RRF_DFS_CONCURRENT
+ * @IEEE80211_CHAN_NO_UHB_VLP_CLIENT: Client connection with VLP AP
+ *	not permitted using this channel
+ * @IEEE80211_CHAN_NO_UHB_AFC_CLIENT: Client connection with AFC AP
+ *	not permitted using this channel
  */
 enum ieee80211_channel_flags {
 	IEEE80211_CHAN_DISABLED		= 1<<0,
@@ -140,6 +145,9 @@ enum ieee80211_channel_flags {
 	IEEE80211_CHAN_16MHZ		= 1<<18,
 	IEEE80211_CHAN_NO_320MHZ	= 1<<19,
 	IEEE80211_CHAN_NO_EHT		= 1<<20,
+	IEEE80211_CHAN_DFS_CONCURRENT	= 1<<21,
+	IEEE80211_CHAN_NO_UHB_VLP_CLIENT= 1<<22,
+	IEEE80211_CHAN_NO_UHB_AFC_CLIENT= 1<<23,
 };
 
 #define IEEE80211_CHAN_NO_HT40 \
@@ -3225,8 +3233,8 @@ struct cfg80211_ibss_params {
  *
  * @behaviour: requested BSS selection behaviour.
  * @param: parameters for requestion behaviour.
- * @band_pref: preferred band for %NL80211_BSS_SELECT_ATTR_BAND_PREF.
- * @adjust: parameters for %NL80211_BSS_SELECT_ATTR_RSSI_ADJUST.
+ * @param.band_pref: preferred band for %NL80211_BSS_SELECT_ATTR_BAND_PREF.
+ * @param.adjust: parameters for %NL80211_BSS_SELECT_ATTR_RSSI_ADJUST.
  */
 struct cfg80211_bss_selection {
 	enum nl80211_bss_select_attr behaviour;
@@ -6063,7 +6071,6 @@ void wiphy_delayed_work_flush(struct wiphy *wiphy,
  *	wireless device if it has no netdev
  * @u: union containing data specific to @iftype
  * @connected: indicates if connected or not (STA mode)
- * @bssid: (private) Used by the internal configuration code
  * @wext: (private) Used by the internal wireless extensions compat code
  * @wext.ibss: (private) IBSS data part of wext handling
  * @wext.connect: (private) connection handling data
@@ -6083,8 +6090,6 @@ void wiphy_delayed_work_flush(struct wiphy *wiphy,
  * @mgmt_registrations: list of registrations for management frames
  * @mgmt_registrations_need_update: mgmt registrations were updated,
  *	need to propagate the update to the driver
- * @beacon_interval: beacon interval used on this device for transmitting
- *	beacons, 0 when not valid
  * @address: The address for this device, valid only if @netdev is %NULL
  * @is_running: true if this is a non-netdev device that has been started, e.g.
  *	the P2P Device.
@@ -7166,6 +7171,23 @@ int cfg80211_get_ies_channel_number(const u8 *ie, size_t ielen,
 				    enum nl80211_band band);
 
 /**
+ * cfg80211_ssid_eq - compare two SSIDs
+ * @a: first SSID
+ * @b: second SSID
+ *
+ * Return: %true if SSIDs are equal, %false otherwise.
+ */
+static inline bool
+cfg80211_ssid_eq(struct cfg80211_ssid *a, struct cfg80211_ssid *b)
+{
+	if (WARN_ON(!a || !b))
+		return false;
+	if (a->ssid_len != b->ssid_len)
+		return false;
+	return memcmp(a->ssid, b->ssid, a->ssid_len) ? false : true;
+}
+
+/**
  * cfg80211_inform_bss_data - inform cfg80211 of a new BSS
  *
  * @wiphy: the wiphy reporting the BSS
@@ -7346,8 +7368,6 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr);
 
 /**
  * struct cfg80211_rx_assoc_resp_data - association response data
- * @bss: the BSS that association was requested with, ownership of the pointer
- *	moves to cfg80211 in the call to cfg80211_rx_assoc_resp()
  * @buf: (Re)Association Response frame (header + body)
  * @len: length of the frame data
  * @uapsd_queues: bitmap of queues configured for uapsd. Same format
@@ -7357,6 +7377,8 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr);
  * @ap_mld_addr: AP MLD address (in case of MLO)
  * @links: per-link information indexed by link ID, use links[0] for
  *	non-MLO connections
+ * @links.bss: the BSS that association was requested with, ownership of the
+ *      pointer moves to cfg80211 in the call to cfg80211_rx_assoc_resp()
  * @links.status: Set this (along with a BSS pointer) for links that
  *	were rejected by the AP.
  */
@@ -9375,6 +9397,16 @@ bool cfg80211_valid_disable_subchannel_bitmap(u16 *bitmap,
  */
 void cfg80211_links_removed(struct net_device *dev, u16 link_mask);
 
+/**
+ * cfg80211_schedule_channels_check - schedule regulatory check if needed
+ * @wdev: the wireless device to check
+ *
+ * In case the device supports NO_IR or DFS relaxations, schedule regulatory
+ * channels check, as previous concurrent operation conditions may not
+ * hold anymore.
+ */
+void cfg80211_schedule_channels_check(struct wireless_dev *wdev);
+
 #ifdef CONFIG_CFG80211_DEBUGFS
 /**
  * wiphy_locked_debugfs_read - do a locked read in debugfs
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 77a71b1396b1..d400fe2e8668 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -476,9 +476,9 @@ struct ieee80211_ba_event {
 /**
  * struct ieee80211_event - event to be sent to the driver
  * @type: The event itself. See &enum ieee80211_event_type.
- * @rssi: relevant if &type is %RSSI_EVENT
- * @mlme: relevant if &type is %AUTH_EVENT
- * @ba: relevant if &type is %BAR_RX_EVENT or %BA_FRAME_TIMEOUT
+ * @u.rssi: relevant if &type is %RSSI_EVENT
+ * @u.mlme: relevant if &type is %AUTH_EVENT
+ * @u.ba: relevant if &type is %BAR_RX_EVENT or %BA_FRAME_TIMEOUT
  * @u:union holding the fields above
  */
 struct ieee80211_event {
@@ -541,8 +541,6 @@ struct ieee80211_fils_discovery {
  * @link_id: link ID, or 0 for non-MLO
  * @htc_trig_based_pkt_ext: default PE in 4us units, if BSS supports HE
  * @uora_exists: is the UORA element advertised by AP
- * @ack_enabled: indicates support to receive a multi-TID that solicits either
- *	ACK, BACK or both
  * @uora_ocw_range: UORA element's OCW Range field
  * @frame_time_rts_th: HE duration RTS threshold, in units of 32us
  * @he_support: does this BSS support HE
@@ -1150,11 +1148,6 @@ ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate)
  * @ack: union part for pure ACK data
  * @ack.cookie: cookie for the ACK
  * @driver_data: array of driver_data pointers
- * @ampdu_ack_len: number of acked aggregated frames.
- * 	relevant only if IEEE80211_TX_STAT_AMPDU was set.
- * @ampdu_len: number of aggregated frames.
- * 	relevant only if IEEE80211_TX_STAT_AMPDU was set.
- * @ack_signal: signal strength of the ACK frame
  */
 struct ieee80211_tx_info {
 	/* common information */
@@ -1362,6 +1355,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	the frame.
  * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on
  *	the frame.
+ * @RX_FLAG_MACTIME: The timestamp passed in the RX status (@mactime
+ *	field) is valid if this field is non-zero, and the position
+ *	where the timestamp was sampled depends on the value.
  * @RX_FLAG_MACTIME_START: The timestamp passed in the RX status (@mactime
  *	field) is valid and contains the time the first symbol of the MPDU
  *	was received. This is useful in monitor mode and for proper IBSS
@@ -1371,6 +1367,11 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	(including FCS) was received.
  * @RX_FLAG_MACTIME_PLCP_START: The timestamp passed in the RX status (@mactime
  *	field) is valid and contains the time the SYNC preamble was received.
+ * @RX_FLAG_MACTIME_IS_RTAP_TS64: The timestamp passed in the RX status @mactime
+ *	is only for use in the radiotap timestamp header, not otherwise a valid
+ *	@mactime value. Note this is a separate flag so that we continue to see
+ *	%RX_FLAG_MACTIME as unset. Also note that in this case the timestamp is
+ *	reported to be 64 bits wide, not just 32.
  * @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present.
  *	Valid only for data frames (mainly A-MPDU)
  * @RX_FLAG_AMPDU_DETAILS: A-MPDU details are known, in particular the reference
@@ -1441,12 +1442,12 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR		= BIT(0),
 	RX_FLAG_DECRYPTED		= BIT(1),
-	RX_FLAG_MACTIME_PLCP_START	= BIT(2),
+	RX_FLAG_ONLY_MONITOR		= BIT(2),
 	RX_FLAG_MMIC_STRIPPED		= BIT(3),
 	RX_FLAG_IV_STRIPPED		= BIT(4),
 	RX_FLAG_FAILED_FCS_CRC		= BIT(5),
 	RX_FLAG_FAILED_PLCP_CRC 	= BIT(6),
-	RX_FLAG_MACTIME_START		= BIT(7),
+	RX_FLAG_MACTIME_IS_RTAP_TS64	= BIT(7),
 	RX_FLAG_NO_SIGNAL_VAL		= BIT(8),
 	RX_FLAG_AMPDU_DETAILS		= BIT(9),
 	RX_FLAG_PN_VALIDATED		= BIT(10),
@@ -1455,8 +1456,10 @@ enum mac80211_rx_flags {
 	RX_FLAG_AMPDU_IS_LAST		= BIT(13),
 	RX_FLAG_AMPDU_DELIM_CRC_ERROR	= BIT(14),
 	RX_FLAG_AMPDU_DELIM_CRC_KNOWN	= BIT(15),
-	RX_FLAG_MACTIME_END		= BIT(16),
-	RX_FLAG_ONLY_MONITOR		= BIT(17),
+	RX_FLAG_MACTIME			= BIT(16) | BIT(17),
+	RX_FLAG_MACTIME_PLCP_START	= 1 << 16,
+	RX_FLAG_MACTIME_START		= 2 << 16,
+	RX_FLAG_MACTIME_END		= 3 << 16,
 	RX_FLAG_SKIP_MONITOR		= BIT(18),
 	RX_FLAG_AMSDU_MORE		= BIT(19),
 	RX_FLAG_RADIOTAP_TLV_AT_END	= BIT(20),
@@ -2835,8 +2838,6 @@ enum ieee80211_hw_flags {
  *	the default is _GI | _BANDWIDTH.
  *	Use the %IEEE80211_RADIOTAP_VHT_KNOWN_\* values.
  *
- * @radiotap_he: HE radiotap validity flags
- *
  * @radiotap_timestamp: Information for the radiotap timestamp field; if the
  *	@units_pos member is set to a non-negative value then the timestamp
  *	field will be added and populated from the &struct ieee80211_rx_status
@@ -4271,6 +4272,8 @@ struct ieee80211_prep_tx_info {
  *	disable background CAC/radar detection.
  * @net_fill_forward_path: Called from .ndo_fill_forward_path in order to
  *	resolve a path for hardware flow offloading
+ * @can_activate_links: Checks if a specific active_links bitmap is
+ *	supported by the driver.
  * @change_vif_links: Change the valid links on an interface, note that while
  *	removing the old link information is still valid (link_conf pointer),
  *	but may immediately disappear after the function returns. The old or
@@ -4651,6 +4654,9 @@ struct ieee80211_ops {
 				     struct ieee80211_sta *sta,
 				     struct net_device_path_ctx *ctx,
 				     struct net_device_path *path);
+	bool (*can_activate_links)(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   u16 active_links);
 	int (*change_vif_links)(struct ieee80211_hw *hw,
 				struct ieee80211_vif *vif,
 				u16 old_links, u16 new_links,
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index a682b54bd3ba..1ccdcae24372 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4256,6 +4256,14 @@ enum nl80211_wmm_rule {
  *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that
  *	is allowed on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is
+ *	allowed for peer-to-peer or adhoc communication under the control
+ *	of a DFS master which operates on the same channel (FCC-594280 D01
+ *	Section B.3). Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT: Client connection to VLP AP
+ *	not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT: Client connection to AFC AP
+ *	not allowed using this channel
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4295,6 +4303,9 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_320MHZ,
 	NL80211_FREQUENCY_ATTR_NO_EHT,
 	NL80211_FREQUENCY_ATTR_PSD,
+	NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
+	NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT,
+	NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4500,6 +4511,12 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
  * @NL80211_RRF_NO_EHT: EHT operation not allowed
  * @NL80211_RRF_PSD: Ruleset has power spectral density value
+ * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
+	peer-to-peer or adhoc communication under the control of a DFS master
+	which operates on the same channel (FCC-594280 D01 Section B.3).
+	Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_RRF_NO_UHB_VLP_CLIENT: Client connection to VLP AP not allowed
+ * @NL80211_RRF_NO_UHB_AFC_CLIENT: Client connection to AFC AP not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4521,6 +4538,9 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_320MHZ		= 1<<18,
 	NL80211_RRF_NO_EHT		= 1<<19,
 	NL80211_RRF_PSD			= 1<<20,
+	NL80211_RRF_DFS_CONCURRENT	= 1<<21,
+	NL80211_RRF_NO_UHB_VLP_CLIENT	= 1<<22,
+	NL80211_RRF_NO_UHB_AFC_CLIENT	= 1<<23,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -5076,9 +5096,12 @@ enum nl80211_bss_use_for {
  *	BSS isn't possible
  * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
  *	supported by the device, and this BSS entry represents one.
+ * @NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH: STA is not supporting
+ *	the AP power type (SP, VLP, AP) that the AP uses.
  */
 enum nl80211_bss_cannot_use_reasons {
 	NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY	= 1 << 0,
+	NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH	= 1 << 1,
 };
 
 /**
@@ -6492,6 +6515,11 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE
  *	handling in AP mode.
  *
+ * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or
+ *	ad hoc operation on DFS channels under the control of a concurrent
+ *	DFS master on the same channel as described in FCC-594280 D01
+ *	(Section B.3). This, for example, allows P2P GO and P2P clients to
+ *	operate on DFS channels as long as there's a concurrent BSS connection.
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -6565,6 +6593,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
+	NL80211_EXT_FEATURE_DFS_CONCURRENT,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,