treewide: Fix typo in Documentation/DocBook

This patch fix spelling typo in Documentation/DocBook.
It is because .html and .xml files are generated by make htmldocs,
I have to fix a typo within the source files.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

8 files changed, 13 insertions, 13 deletions

diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 471f276ce8f7..0145b948b147 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -55,7 +55,7 @@ struct drm_fb_helper_surface_size {
  *             save the current lut when force-restoring the fbdev for e.g.
  *             kdbg.
  * @fb_probe: Driver callback to allocate and initialize the fbdev info
- *            structure. Futhermore it also needs to allocate the drm
+ *            structure. Furthermore it also needs to allocate the drm
  *            framebuffer used to back the fbdev.
  * @initial_config: Setup an initial fbdev display configuration
  *
diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h
index 0dca785288cf..39bfd5b89077 100644
--- a/include/linux/hsi/hsi.h
+++ b/include/linux/hsi/hsi.h
@@ -178,7 +178,7 @@ static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv)
  * @complete: Transfer completion callback
  * @destructor: Destructor to free resources when flushing
  * @status: Status of the transfer when completed
- * @actual_len: Actual length of data transfered on completion
+ * @actual_len: Actual length of data transferred on completion
  * @channel: Channel were to TX/RX the message
  * @ttype: Transfer type (TX if set, RX otherwise)
  * @break_frame: if true HSI will send/receive a break frame. Data buffers are
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index 552d51efb429..554fde3a3927 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -722,7 +722,7 @@ __kfifo_uint_must_check_helper( \
 /**
  * kfifo_dma_out_finish - finish a DMA OUT operation
  * @fifo: address of the fifo to be used
- * @len: number of bytes transferd
+ * @len: number of bytes transferrd
  *
  * This macro finish a DMA OUT operation. The out counter will be updated by
  * the len parameter. No error checking will be done.
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index b8809fef61f5..11982d0ce11b 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -35,7 +35,7 @@ struct pipe_buffer {
  *	@tmp_page: cached released page
  *	@readers: number of current readers of this pipe
  *	@writers: number of current writers of this pipe
- *	@files: number of struct file refering this pipe (protected by ->i_lock)
+ *	@files: number of struct file referring this pipe (protected by ->i_lock)
  *	@waiting_writers: number of writers blocked waiting for room
  *	@r_counter: reader counter
  *	@w_counter: writer counter
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 215b5ea1cb30..cde842513df2 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1951,7 +1951,7 @@ static inline void skb_propagate_pfmemalloc(struct page *page,
 }
 
 /**
- * skb_frag_page - retrieve the page refered to by a paged fragment
+ * skb_frag_page - retrieve the page referred to by a paged fragment
  * @frag: the paged fragment
  *
  * Returns the &struct page associated with @frag.
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 8c62ba74dd91..8d3a37bc6110 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -234,7 +234,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  * @mode_bits: flags understood by this controller driver
  * @bits_per_word_mask: A mask indicating which values of bits_per_word are
  *	supported by the driver. Bit n indicates that a bits_per_word n+1 is
- *	suported. If set, the SPI core will reject any transfer with an
+ *	supported. If set, the SPI core will reject any transfer with an
  *	unsupported bits_per_word. If not set, this value is simply ignored,
  *	and it's up to the individual driver to perform any validation.
  * @min_speed_hz: Lowest supported transfer speed
@@ -259,7 +259,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  * @cur_msg: the currently in-flight message
  * @cur_msg_prepared: spi_prepare_message was called for the currently
  *                    in-flight message
- * @xfer_completion: used by core tranfer_one_message()
+ * @xfer_completion: used by core transfer_one_message()
  * @busy: message pump is busy
  * @running: message pump is running
  * @rt: whether this queue is set to run as a realtime task
@@ -493,7 +493,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
  * @rx_buf: data to be read (dma-safe memory), or NULL
  * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
  * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
- * @tx_nbits: number of bits used for writting. If 0 the default
+ * @tx_nbits: number of bits used for writing. If 0 the default
  *      (SPI_NBITS_SINGLE) is used.
  * @rx_nbits: number of bits used for reading. If 0 the default
  *      (SPI_NBITS_SINGLE) is used.
@@ -551,7 +551,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
  * by the results of previous messages and where the whole transaction
  * ends when the chipselect goes intactive.
  *
- * When SPI can transfer in 1x,2x or 4x. It can get this tranfer information
+ * When SPI can transfer in 1x,2x or 4x. It can get this transfer information
  * from device through @tx_nbits and @rx_nbits. In Bi-direction, these
  * two should both be set. User can set transfer mode with SPI_NBITS_SINGLE(1x)
  * SPI_NBITS_DUAL(2x) and SPI_NBITS_QUAD(4x) to support these three transfer.
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 5e61589fc166..0e7a555cab1e 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -92,7 +92,7 @@ struct usb_configuration;
  * @suspend: Notifies functions when the host stops sending USB traffic.
  * @resume: Notifies functions when the host restarts USB traffic.
  * @get_status: Returns function status as a reply to
- *	GetStatus() request when the recepient is Interface.
+ *	GetStatus() request when the recipient is Interface.
  * @func_suspend: callback to be called when
  *	SetFeature(FUNCTION_SUSPEND) is reseived
  *
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 7ceed99a05bc..6b79bfc98175 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1841,7 +1841,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  *
  * Driver informs U-APSD client support by enabling
  * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
- * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS
+ * uapsd parameter in conf_tx() operation. Hardware needs to send the QoS
  * Nullfunc frames and stay awake until the service period has ended. To
  * utilize U-APSD, dynamic powersave is disabled for voip AC and all frames
  * from that AC are transmitted with powersave enabled.
@@ -2047,7 +2047,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * with the number of frames to be released and which TIDs they are
  * to come from. In this case, the driver is responsible for setting
  * the EOSP (for uAPSD) and MORE_DATA bits in the released frames,
- * to help the @more_data paramter is passed to tell the driver if
+ * to help the @more_data parameter is passed to tell the driver if
  * there is more data on other TIDs -- the TIDs to release frames
  * from are ignored since mac80211 doesn't know how many frames the
  * buffers for those TIDs contain.
@@ -2592,7 +2592,7 @@ enum ieee80211_roc_type {
  *	parameters. In the case where the driver buffers some frames for
  *	sleeping stations mac80211 will use this callback to tell the driver
  *	to release some frames, either for PS-poll or uAPSD.
- *	Note that if the @more_data paramter is %false the driver must check
+ *	Note that if the @more_data parameter is %false the driver must check
  *	if there are more frames on the given TIDs, and if there are more than
  *	the frames being released then it must still set the more-data bit in
  *	the frame. If the @more_data parameter is %true, then of course the