diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-01-11 10:07:29 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-01-11 10:07:29 -0800 |
commit | 3e7aeb78ab01c2c2f0e1f784e5ddec88fcd3d106 (patch) | |
tree | bdbfd45f8d8e967b06ed2d9cb92f67f686d02659 /tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh | |
parent | de927f6c0b07d9e698416c5b287c521b07694cac (diff) | |
parent | a7fe0881d9b78d402bbd9067dd4503a57c57a1d9 (diff) |
Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
Diffstat (limited to 'tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh')
-rwxr-xr-x | tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh | 48 |
1 files changed, 21 insertions, 27 deletions
diff --git a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh index f96282362811..79fb81e63c59 100755 --- a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh +++ b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh @@ -163,8 +163,7 @@ # +---------------------------------------------------+ # -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 +source lib.sh readonly LOCALSID_TABLE_ID=90 readonly IPv6_RT_NETWORK=fd00 @@ -219,27 +218,22 @@ cleanup() ip link del veth-rt-1 2>/dev/null || true ip link del veth-rt-2 2>/dev/null || true - # destroy routers rt-* and hosts hs-* - for ns in $(ip netns show | grep -E 'rt-*|hs-*'); do - ip netns del ${ns} || true - done + cleanup_all_ns } # Setup the basic networking for the routers setup_rt_networking() { - local rt=$1 - local nsname=rt-${rt} - - ip netns add ${nsname} + local id=$1 + eval local nsname=\${rt_${id}} ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.accept_dad=0 ip netns exec ${nsname} sysctl -wq net.ipv6.conf.default.accept_dad=0 - ip link set veth-rt-${rt} netns ${nsname} - ip -netns ${nsname} link set veth-rt-${rt} name veth0 + ip link set veth-rt-${id} netns ${nsname} + ip -netns ${nsname} link set veth-rt-${id} name veth0 - ip -netns ${nsname} addr add ${IPv6_RT_NETWORK}::${rt}/64 dev veth0 nodad + ip -netns ${nsname} addr add ${IPv6_RT_NETWORK}::${id}/64 dev veth0 nodad ip -netns ${nsname} link set veth0 up ip -netns ${nsname} link set lo up @@ -249,16 +243,13 @@ setup_rt_networking() setup_hs() { - local hs=$1 - local rt=$2 + local hid=$1 + local rid=$2 local tid=$3 - local hsname=hs-t${tid}-${hs} - local rtname=rt-${rt} + eval local hsname=\${hs_t${tid}_${hid}} + eval local rtname=\${rt_${rid}} local rtveth=veth-t${tid} - # set the networking for the host - ip netns add ${hsname} - # disable the rp_filter otherwise the kernel gets confused about how # to route decap ipv4 packets. ip netns exec ${rtname} sysctl -wq net.ipv4.conf.all.rp_filter=0 @@ -266,7 +257,7 @@ setup_hs() ip -netns ${hsname} link add veth0 type veth peer name ${rtveth} ip -netns ${hsname} link set ${rtveth} netns ${rtname} - ip -netns ${hsname} addr add ${IPv4_HS_NETWORK}.${hs}/24 dev veth0 + ip -netns ${hsname} addr add ${IPv4_HS_NETWORK}.${hid}/24 dev veth0 ip -netns ${hsname} link set veth0 up ip -netns ${hsname} link set lo up @@ -293,10 +284,8 @@ setup_vpn_config() local rtdst=$4 local tid=$5 - local hssrc_name=hs-t${tid}-${hssrc} - local hsdst_name=hs-t${tid}-${hsdst} - local rtsrc_name=rt-${rtsrc} - local rtdst_name=rt-${rtdst} + eval local rtsrc_name=\${rt_${rtsrc}} + eval local rtdst_name=\${rt_${rtdst}} local vpn_sid=${VPN_LOCATOR_SERVICE}:${hssrc}${hsdst}:${tid}::6004 # set the encap route for encapsulating packets which arrive from the @@ -328,18 +317,21 @@ setup() { ip link add veth-rt-1 type veth peer name veth-rt-2 # setup the networking for router rt-1 and router rt-2 + setup_ns rt_1 rt_2 setup_rt_networking 1 setup_rt_networking 2 # setup two hosts for the tenant 100. # - host hs-1 is directly connected to the router rt-1; # - host hs-2 is directly connected to the router rt-2. + setup_ns hs_t100_1 hs_t100_2 setup_hs 1 1 100 #args: host router tenant setup_hs 2 2 100 # setup two hosts for the tenant 200 # - host hs-3 is directly connected to the router rt-1; # - host hs-4 is directly connected to the router rt-2. + setup_ns hs_t200_3 hs_t200_4 setup_hs 3 1 200 setup_hs 4 2 200 @@ -358,8 +350,9 @@ check_rt_connectivity() { local rtsrc=$1 local rtdst=$2 + eval local nsname=\${rt_${rtsrc}} - ip netns exec rt-${rtsrc} ping -c 1 -W 1 ${IPv6_RT_NETWORK}::${rtdst} \ + ip netns exec ${nsname} ping -c 1 -W 1 ${IPv6_RT_NETWORK}::${rtdst} \ >/dev/null 2>&1 } @@ -377,8 +370,9 @@ check_hs_connectivity() local hssrc=$1 local hsdst=$2 local tid=$3 + eval local nsname=\${hs_t${tid}_${hssrc}} - ip netns exec hs-t${tid}-${hssrc} ping -c 1 -W ${PING_TIMEOUT_SEC} \ + ip netns exec ${nsname} ping -c 1 -W ${PING_TIMEOUT_SEC} \ ${IPv4_HS_NETWORK}.${hsdst} >/dev/null 2>&1 } |